linux_dsm_epyc7002/include/sound/tlv320aic32x4.h
Dan Murphy b9045b9c6b ASoC: tlv320aic32x4: Add gpio configuration to the codec
Add the ability to configure the MFP1->MFP5 registers
as GPIOs.  In addition adding ALSA controls to get and set
the GPIO state.

Per the data sheet each MFP can be configured as a GPIO
input only, output only or either an input or output.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-17 16:22:28 +01:00

56 lines
1.4 KiB
C

/*
* tlv320aic32x4.h -- TLV320AIC32X4 Soc Audio driver platform data
*
* Copyright 2011 Vista Silicon S.L.
*
* Author: Javier Martin <javier.martin@vista-silicon.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _AIC32X4_PDATA_H
#define _AIC32X4_PDATA_H
#define AIC32X4_PWR_MICBIAS_2075_LDOIN 0x00000001
#define AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE 0x00000002
#define AIC32X4_PWR_AIC32X4_LDO_ENABLE 0x00000004
#define AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 0x00000008
#define AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED 0x00000010
#define AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K 0x00000001
#define AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K 0x00000002
/* GPIO API */
#define AIC32X4_MFPX_DEFAULT_VALUE 0xff
#define AIC32X4_MFP1_DIN_DISABLED 0
#define AIC32X4_MFP1_DIN_ENABLED 0x2
#define AIC32X4_MFP1_GPIO_IN 0x4
#define AIC32X4_MFP2_GPIO_OUT_LOW 0x0
#define AIC32X4_MFP2_GPIO_OUT_HIGH 0x1
#define AIC32X4_MFP_GPIO_ENABLED 0x4
#define AIC32X4_MFP5_GPIO_DISABLED 0x0
#define AIC32X4_MFP5_GPIO_INPUT 0x8
#define AIC32X4_MFP5_GPIO_OUTPUT 0xc
#define AIC32X4_MFP5_GPIO_OUT_LOW 0x0
#define AIC32X4_MFP5_GPIO_OUT_HIGH 0x1
struct aic32x4_setup_data {
unsigned int gpio_func[5];
};
struct aic32x4_pdata {
struct aic32x4_setup_data *setup;
u32 power_cfg;
u32 micpga_routing;
bool swapdacs;
int rstn_gpio;
};
#endif