linux_dsm_epyc7002/drivers/power/88pm860x_charger.c

/*
 * Battery driver for Marvell 88PM860x PMIC
 *
 * Copyright (c) 2012 Marvell International Ltd.
 * Author:	Jett Zhou <jtzhou@marvell.com>
 *		Haojian Zhuang <haojian.zhuang@marvell.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/power_supply.h>
#include <linux/mfd/88pm860x.h>
#include <linux/delay.h>
#include <linux/uaccess.h>
#include <asm/div64.h>

/* bit definitions of Status Query Interface 2 */
#define STATUS2_CHG		(1 << 2)

/* bit definitions of Reset Out Register */
#define RESET_SW_PD		(1 << 7)

/* bit definitions of PreReg 1 */
#define PREREG1_90MA		(0x0)
#define PREREG1_180MA		(0x1)
#define PREREG1_450MA		(0x4)
#define PREREG1_540MA		(0x5)
#define PREREG1_1350MA		(0xE)
#define PREREG1_VSYS_4_5V	(3 << 4)

/* bit definitions of Charger Control 1 Register */
#define CC1_MODE_OFF		(0)
#define CC1_MODE_PRECHARGE	(1)
#define CC1_MODE_FASTCHARGE	(2)
#define CC1_MODE_PULSECHARGE	(3)
#define CC1_ITERM_20MA		(0 << 2)
#define CC1_ITERM_60MA		(2 << 2)
#define CC1_VFCHG_4_2V		(9 << 4)

/* bit definitions of Charger Control 2 Register */
#define CC2_ICHG_100MA		(0x1)
#define CC2_ICHG_500MA		(0x9)
#define CC2_ICHG_1000MA		(0x13)

/* bit definitions of Charger Control 3 Register */
#define CC3_180MIN_TIMEOUT	(0x6 << 4)
#define CC3_270MIN_TIMEOUT	(0x7 << 4)
#define CC3_360MIN_TIMEOUT	(0xA << 4)
#define CC3_DISABLE_TIMEOUT	(0xF << 4)

/* bit definitions of Charger Control 4 Register */
#define CC4_IPRE_40MA		(7)
#define CC4_VPCHG_3_2V		(3 << 4)
#define CC4_IFCHG_MON_EN	(1 << 6)
#define CC4_BTEMP_MON_EN	(1 << 7)

/* bit definitions of Charger Control 6 Register */
#define CC6_BAT_OV_EN		(1 << 2)
#define CC6_BAT_UV_EN		(1 << 3)
#define CC6_UV_VBAT_SET		(0x3 << 6)	/* 2.8v */

/* bit definitions of Charger Control 7 Register */
#define CC7_BAT_REM_EN		(1 << 3)
#define CC7_IFSM_EN		(1 << 7)

/* bit definitions of Measurement Enable 1 Register */
#define MEAS1_VBAT		(1 << 0)

/* bit definitions of Measurement Enable 3 Register */
#define MEAS3_IBAT_EN		(1 << 0)
#define MEAS3_CC_EN		(1 << 2)

#define FSM_INIT		0
#define FSM_DISCHARGE		1
#define FSM_PRECHARGE		2
#define FSM_FASTCHARGE		3

#define PRECHARGE_THRESHOLD	3100
#define POWEROFF_THRESHOLD	3400
#define CHARGE_THRESHOLD	4000
#define DISCHARGE_THRESHOLD	4180

/* over-temperature on PM8606 setting */
#define OVER_TEMP_FLAG		(1 << 6)
#define OVTEMP_AUTORECOVER	(1 << 3)

/* over-voltage protect on vchg setting mv */
#define VCHG_NORMAL_LOW		4200
#define VCHG_NORMAL_CHECK	5800
#define VCHG_NORMAL_HIGH	6000
#define VCHG_OVP_LOW		5500

struct pm860x_charger_info {
	struct pm860x_chip *chip;
	struct i2c_client *i2c;
	struct i2c_client *i2c_8606;
	struct device *dev;

	struct power_supply usb;
	struct mutex lock;
	int irq_nums;
	int irq[7];
	unsigned state:3;	/* fsm state */
	unsigned online:1;	/* usb charger */
	unsigned present:1;	/* battery present */
	unsigned allowed:1;
};

static char *pm860x_supplied_to[] = {
	"battery-monitor",
};

static int measure_vchg(struct pm860x_charger_info *info, int *data)
{
	unsigned char buf[2];
	int ret = 0;

	ret = pm860x_bulk_read(info->i2c, PM8607_VCHG_MEAS1, 2, buf);
	if (ret < 0)
		return ret;

	*data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f);
	/* V_BATT_MEAS(mV) = value * 5 * 1.8 * 1000 / (2^12) */
	*data = ((*data & 0xfff) * 9 * 125) >> 9;

	dev_dbg(info->dev, "%s, vchg: %d mv\n", __func__, *data);

	return ret;
}

static void set_vchg_threshold(struct pm860x_charger_info *info,
			       int min, int max)
{
	int data;

	/* (tmp << 8) * / 5 / 1800 */
	if (min <= 0)
		data = 0;
	else
		data = (min << 5) / 1125;
	pm860x_reg_write(info->i2c, PM8607_VCHG_LOWTH, data);
	dev_dbg(info->dev, "VCHG_LOWTH:%dmv, 0x%x\n", min, data);

	if (max <= 0)
		data = 0xff;
	else
		data = (max << 5) / 1125;
	pm860x_reg_write(info->i2c, PM8607_VCHG_HIGHTH, data);
	dev_dbg(info->dev, "VCHG_HIGHTH:%dmv, 0x%x\n", max, data);

}

static void set_vbatt_threshold(struct pm860x_charger_info *info,
				int min, int max)
{
	int data;

	/* (tmp << 8) * 3 / 1800 */
	if (min <= 0)
		data = 0;
	else
		data = (min << 5) / 675;
	pm860x_reg_write(info->i2c, PM8607_VBAT_LOWTH, data);
	dev_dbg(info->dev, "VBAT Min:%dmv, LOWTH:0x%x\n", min, data);

	if (max <= 0)
		data = 0xff;
	else
		data = (max << 5) / 675;
	pm860x_reg_write(info->i2c, PM8607_VBAT_HIGHTH, data);
	dev_dbg(info->dev, "VBAT Max:%dmv, HIGHTH:0x%x\n", max, data);

	return;
}

static int start_precharge(struct pm860x_charger_info *info)
{
	int ret;

	dev_dbg(info->dev, "Start Pre-charging!\n");
	set_vbatt_threshold(info, 0, 0);

	ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA,
			       PREREG1_1350MA | PREREG1_VSYS_4_5V);
	if (ret < 0)
		goto out;
	/* stop charging */
	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
			      CC1_MODE_OFF);
	if (ret < 0)
		goto out;
	/* set 270 minutes timeout */
	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4),
			      CC3_270MIN_TIMEOUT);
	if (ret < 0)
		goto out;
	/* set precharge current, termination voltage, IBAT & TBAT monitor */
	ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL4,
			       CC4_IPRE_40MA | CC4_VPCHG_3_2V |
			       CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN);
	if (ret < 0)
		goto out;
	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7,
			      CC7_BAT_REM_EN | CC7_IFSM_EN,
			      CC7_BAT_REM_EN | CC7_IFSM_EN);
	if (ret < 0)
		goto out;
	/* trigger precharge */
	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
			      CC1_MODE_PRECHARGE);
out:
	return ret;
}

static int start_fastcharge(struct pm860x_charger_info *info)
{
	int ret;

	dev_dbg(info->dev, "Start Fast-charging!\n");

	/* set fastcharge termination current & voltage, disable charging */
	ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL1,
			       CC1_MODE_OFF | CC1_ITERM_60MA |
			       CC1_VFCHG_4_2V);
	if (ret < 0)
		goto out;
	ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA,
			       PREREG1_540MA | PREREG1_VSYS_4_5V);
	if (ret < 0)
		goto out;
	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f,
			      CC2_ICHG_500MA);
	if (ret < 0)
		goto out;
	/* set 270 minutes timeout */
	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4),
			      CC3_270MIN_TIMEOUT);
	if (ret < 0)
		goto out;
	/* set IBAT & TBAT monitor */
	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL4,
			      CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN,
			      CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN);
	if (ret < 0)
		goto out;
	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6,
			      CC6_BAT_OV_EN | CC6_BAT_UV_EN |
			      CC6_UV_VBAT_SET,
			      CC6_BAT_OV_EN | CC6_BAT_UV_EN |
			      CC6_UV_VBAT_SET);
	if (ret < 0)
		goto out;
	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7,
			      CC7_BAT_REM_EN | CC7_IFSM_EN,
			      CC7_BAT_REM_EN | CC7_IFSM_EN);
	if (ret < 0)
		goto out;
	/* launch fast-charge */
	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
			      CC1_MODE_FASTCHARGE);
	/* vchg threshold setting */
	set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_NORMAL_HIGH);
out:
	return ret;
}

static void stop_charge(struct pm860x_charger_info *info, int vbatt)
{
	dev_dbg(info->dev, "Stop charging!\n");
	pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, CC1_MODE_OFF);
	if (vbatt > CHARGE_THRESHOLD && info->online)
		set_vbatt_threshold(info, CHARGE_THRESHOLD, 0);
}

static void power_off_notification(struct pm860x_charger_info *info)
{
	dev_dbg(info->dev, "Power-off notification!\n");
}

static int set_charging_fsm(struct pm860x_charger_info *info)
{
	struct power_supply *psy;
	union power_supply_propval data;
	unsigned char fsm_state[][16] = { "init", "discharge", "precharge",
		"fastcharge",
	};
	int ret;
	int vbatt;

	psy = power_supply_get_by_name(pm860x_supplied_to[0]);
	if (!psy)
		return -EINVAL;
	ret = psy->get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW, &data);
	if (ret)
		return ret;
	vbatt = data.intval / 1000;

	ret = psy->get_property(psy, POWER_SUPPLY_PROP_PRESENT, &data);
	if (ret)
		return ret;

	mutex_lock(&info->lock);
	info->present = data.intval;

	dev_dbg(info->dev, "Entering FSM:%s, Charger:%s, Battery:%s, "
		"Allowed:%d\n",
		&fsm_state[info->state][0],
		(info->online) ? "online" : "N/A",
		(info->present) ? "present" : "N/A", info->allowed);
	dev_dbg(info->dev, "set_charging_fsm:vbatt:%d(mV)\n", vbatt);

	switch (info->state) {
	case FSM_INIT:
		if (info->online && info->present && info->allowed) {
			if (vbatt < PRECHARGE_THRESHOLD) {
				info->state = FSM_PRECHARGE;
				start_precharge(info);
			} else if (vbatt > DISCHARGE_THRESHOLD) {
				info->state = FSM_DISCHARGE;
				stop_charge(info, vbatt);
			} else if (vbatt < DISCHARGE_THRESHOLD) {
				info->state = FSM_FASTCHARGE;
				start_fastcharge(info);
			}
		} else {
			if (vbatt < POWEROFF_THRESHOLD) {
				power_off_notification(info);
			} else {
				info->state = FSM_DISCHARGE;
				stop_charge(info, vbatt);
			}
		}
		break;
	case FSM_PRECHARGE:
		if (info->online && info->present && info->allowed) {
			if (vbatt > PRECHARGE_THRESHOLD) {
				info->state = FSM_FASTCHARGE;
				start_fastcharge(info);
			}
		} else {
			info->state = FSM_DISCHARGE;
			stop_charge(info, vbatt);
		}
		break;
	case FSM_FASTCHARGE:
		if (info->online && info->present && info->allowed) {
			if (vbatt < PRECHARGE_THRESHOLD) {
				info->state = FSM_PRECHARGE;
				start_precharge(info);
			}
		} else {
			info->state = FSM_DISCHARGE;
			stop_charge(info, vbatt);
		}
		break;
	case FSM_DISCHARGE:
		if (info->online && info->present && info->allowed) {
			if (vbatt < PRECHARGE_THRESHOLD) {
				info->state = FSM_PRECHARGE;
				start_precharge(info);
			} else if (vbatt < DISCHARGE_THRESHOLD) {
				info->state = FSM_FASTCHARGE;
				start_fastcharge(info);
			}
		} else {
			if (vbatt < POWEROFF_THRESHOLD)
				power_off_notification(info);
			else if (vbatt > CHARGE_THRESHOLD && info->online)
				set_vbatt_threshold(info, CHARGE_THRESHOLD, 0);
		}
		break;
	default:
		dev_warn(info->dev, "FSM meets wrong state:%d\n",
			 info->state);
		break;
	}
	dev_dbg(info->dev,
		"Out FSM:%s, Charger:%s, Battery:%s, Allowed:%d\n",
		&fsm_state[info->state][0],
		(info->online) ? "online" : "N/A",
		(info->present) ? "present" : "N/A", info->allowed);
	mutex_unlock(&info->lock);

	return 0;
}

static irqreturn_t pm860x_charger_handler(int irq, void *data)
{
	struct pm860x_charger_info *info = data;
	int ret;

	mutex_lock(&info->lock);
	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
	if (ret < 0) {
		mutex_unlock(&info->lock);
		goto out;
	}
	if (ret & STATUS2_CHG) {
		info->online = 1;
		info->allowed = 1;
	} else {
		info->online = 0;
		info->allowed = 0;
	}
	mutex_unlock(&info->lock);
	dev_dbg(info->dev, "%s, Charger:%s, Allowed:%d\n", __func__,
		(info->online) ? "online" : "N/A", info->allowed);

	set_charging_fsm(info);

	power_supply_changed(&info->usb);
out:
	return IRQ_HANDLED;
}

static irqreturn_t pm860x_temp_handler(int irq, void *data)
{
	struct power_supply *psy;
	struct pm860x_charger_info *info = data;
	union power_supply_propval temp;
	int value;
	int ret;

	psy = power_supply_get_by_name(pm860x_supplied_to[0]);
	if (!psy)
		goto out;
	ret = psy->get_property(psy, POWER_SUPPLY_PROP_TEMP, &temp);
	if (ret)
		goto out;
	value = temp.intval / 10;

	mutex_lock(&info->lock);
	/* Temperature < -10 C or >40 C, Will not allow charge */
	if (value < -10 || value > 40)
		info->allowed = 0;
	else
		info->allowed = 1;
	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
	mutex_unlock(&info->lock);

	set_charging_fsm(info);
out:
	return IRQ_HANDLED;
}

static irqreturn_t pm860x_exception_handler(int irq, void *data)
{
	struct pm860x_charger_info *info = data;

	mutex_lock(&info->lock);
	info->allowed = 0;
	mutex_unlock(&info->lock);
	dev_dbg(info->dev, "%s, irq: %d\n", __func__, irq);

	set_charging_fsm(info);
	return IRQ_HANDLED;
}

static irqreturn_t pm860x_done_handler(int irq, void *data)
{
	struct pm860x_charger_info *info = data;
	struct power_supply *psy;
	union power_supply_propval val;
	int ret;
	int vbatt;

	mutex_lock(&info->lock);
	/* pre-charge done, will transimit to fast-charge stage */
	if (info->state == FSM_PRECHARGE) {
		info->allowed = 1;
		goto out;
	}
	/*
	 * Fast charge done, delay to read
	 * the correct status of CHG_DET.
	 */
	mdelay(5);
	info->allowed = 0;
	psy = power_supply_get_by_name(pm860x_supplied_to[0]);
	if (!psy)
		goto out;
	ret = psy->get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW, &val);
	if (ret)
		goto out;
	vbatt = val.intval / 1000;
	/*
	 * CHG_DONE interrupt is faster than CHG_DET interrupt when
	 * plug in/out usb, So we can not rely on info->online, we
	 * need check pm8607 status register to check usb is online
	 * or not, then we can decide it is real charge done
	 * automatically or it is triggered by usb plug out;
	 */
	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
	if (ret < 0)
		goto out;
	if (vbatt > CHARGE_THRESHOLD && ret & STATUS2_CHG)
		psy->set_property(psy, POWER_SUPPLY_PROP_CHARGE_FULL, &val);

out:
	mutex_unlock(&info->lock);
	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
	set_charging_fsm(info);

	return IRQ_HANDLED;
}

static irqreturn_t pm860x_vbattery_handler(int irq, void *data)
{
	struct pm860x_charger_info *info = data;

	mutex_lock(&info->lock);

	set_vbatt_threshold(info, 0, 0);

	if (info->present && info->online)
		info->allowed = 1;
	else
		info->allowed = 0;
	mutex_unlock(&info->lock);
	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);

	set_charging_fsm(info);

	return IRQ_HANDLED;
}

static irqreturn_t pm860x_vchg_handler(int irq, void *data)
{
	struct pm860x_charger_info *info = data;
	int vchg = 0;

	if (info->present)
		goto out;

	measure_vchg(info, &vchg);

	mutex_lock(&info->lock);
	if (!info->online) {
		int status;
		/* check if over-temp on pm8606 or not */
		status = pm860x_reg_read(info->i2c_8606, PM8606_FLAGS);
		if (status & OVER_TEMP_FLAG) {
			/* clear over temp flag and set auto recover */
			pm860x_set_bits(info->i2c_8606, PM8606_FLAGS,
					OVER_TEMP_FLAG, OVER_TEMP_FLAG);
			pm860x_set_bits(info->i2c_8606,
					PM8606_VSYS,
					OVTEMP_AUTORECOVER,
					OVTEMP_AUTORECOVER);
			dev_dbg(info->dev,
				"%s, pm8606 over-temp occure\n", __func__);
		}
	}

	if (vchg > VCHG_NORMAL_CHECK) {
		set_vchg_threshold(info, VCHG_OVP_LOW, 0);
		info->allowed = 0;
		dev_dbg(info->dev,
			"%s,pm8607 over-vchg occure,vchg = %dmv\n",
			__func__, vchg);
	} else if (vchg < VCHG_OVP_LOW) {
		set_vchg_threshold(info, VCHG_NORMAL_LOW,
				   VCHG_NORMAL_HIGH);
		info->allowed = 1;
		dev_dbg(info->dev,
			"%s,pm8607 over-vchg recover,vchg = %dmv\n",
			__func__, vchg);
	}
	mutex_unlock(&info->lock);

	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
	set_charging_fsm(info);
out:
	return IRQ_HANDLED;
}

static int pm860x_usb_get_prop(struct power_supply *psy,
			       enum power_supply_property psp,
			       union power_supply_propval *val)
{
	struct pm860x_charger_info *info =
	    dev_get_drvdata(psy->dev->parent);

	switch (psp) {
	case POWER_SUPPLY_PROP_STATUS:
		if (info->state == FSM_FASTCHARGE ||
				info->state == FSM_PRECHARGE)
			val->intval = POWER_SUPPLY_STATUS_CHARGING;
		else
			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
		break;
	case POWER_SUPPLY_PROP_ONLINE:
		val->intval = info->online;
		break;
	default:
		return -ENODEV;
	}
	return 0;
}

static enum power_supply_property pm860x_usb_props[] = {
	POWER_SUPPLY_PROP_STATUS,
	POWER_SUPPLY_PROP_ONLINE,
};

static int pm860x_init_charger(struct pm860x_charger_info *info)
{
	int ret;

	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
	if (ret < 0)
		return ret;

	mutex_lock(&info->lock);
	info->state = FSM_INIT;
	if (ret & STATUS2_CHG) {
		info->online = 1;
		info->allowed = 1;
	} else {
		info->online = 0;
		info->allowed = 0;
	}
	mutex_unlock(&info->lock);

	set_charging_fsm(info);
	return 0;
}

static struct pm860x_irq_desc {
	const char *name;
	irqreturn_t (*handler)(int irq, void *data);
} pm860x_irq_descs[] = {
	{ "usb supply detect", pm860x_charger_handler },
	{ "charge done", pm860x_done_handler },
	{ "charge timeout", pm860x_exception_handler },
	{ "charge fault", pm860x_exception_handler },
	{ "temperature", pm860x_temp_handler },
	{ "vbatt", pm860x_vbattery_handler },
	{ "vchg", pm860x_vchg_handler },
};

static int pm860x_charger_probe(struct platform_device *pdev)
{
	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
	struct pm860x_charger_info *info;
	int ret;
	int count;
	int i;
	int j;

	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
	if (!info)
		return -ENOMEM;

	count = pdev->num_resources;
	for (i = 0, j = 0; i < count; i++) {
		info->irq[j] = platform_get_irq(pdev, i);
		if (info->irq[j] < 0)
			continue;
		j++;
	}
	info->irq_nums = j;

	info->chip = chip;
	info->i2c =
	    (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
	info->i2c_8606 =
	    (chip->id == CHIP_PM8607) ? chip->companion : chip->client;
	if (!info->i2c_8606) {
		dev_err(&pdev->dev, "Missed I2C address of 88PM8606!\n");
		ret = -EINVAL;
		goto out;
	}
	info->dev = &pdev->dev;

	/* set init value for the case we are not using battery */
	set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_OVP_LOW);

	mutex_init(&info->lock);
	platform_set_drvdata(pdev, info);

	info->usb.name = "usb";
	info->usb.type = POWER_SUPPLY_TYPE_USB;
	info->usb.supplied_to = pm860x_supplied_to;
	info->usb.num_supplicants = ARRAY_SIZE(pm860x_supplied_to);
	info->usb.properties = pm860x_usb_props;
	info->usb.num_properties = ARRAY_SIZE(pm860x_usb_props);
	info->usb.get_property = pm860x_usb_get_prop;
	ret = power_supply_register(&pdev->dev, &info->usb);
	if (ret)
		goto out;

	pm860x_init_charger(info);

	for (i = 0; i < ARRAY_SIZE(info->irq); i++) {
		ret = request_threaded_irq(info->irq[i], NULL,
			pm860x_irq_descs[i].handler,
			IRQF_ONESHOT, pm860x_irq_descs[i].name, info);
		if (ret < 0) {
			dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
				info->irq[i], ret);
			goto out_irq;
		}
	}
	return 0;

out_irq:
	while (--i >= 0)
		free_irq(info->irq[i], info);
out:
	kfree(info);
	return ret;
}

static int pm860x_charger_remove(struct platform_device *pdev)
{
	struct pm860x_charger_info *info = platform_get_drvdata(pdev);
	int i;

	platform_set_drvdata(pdev, NULL);
	power_supply_unregister(&info->usb);
	free_irq(info->irq[0], info);
	for (i = 0; i < info->irq_nums; i++)
		free_irq(info->irq[i], info);
	kfree(info);
	return 0;
}

static struct platform_driver pm860x_charger_driver = {
	.driver = {
		   .name = "88pm860x-charger",
		   .owner = THIS_MODULE,
	},
	.probe = pm860x_charger_probe,
	.remove = pm860x_charger_remove,
};
module_platform_driver(pm860x_charger_driver);

MODULE_DESCRIPTION("Marvell 88PM860x Charger driver");
MODULE_LICENSE("GPL");