mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 08:56:59 +07:00
fb143fcbb9
Add the device tree bindings for USB OTG support. Driver was tested using on a LG Nexus 5 (hammerhead) phone. This patch is based on work from Jonathan Marek and from the other msm8974 devices. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
507 lines
9.5 KiB
Plaintext
507 lines
9.5 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
#include "qcom-msm8974.dtsi"
|
|
#include "qcom-pm8841.dtsi"
|
|
#include "qcom-pm8941.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
|
|
/ {
|
|
model = "LGE MSM 8974 HAMMERHEAD";
|
|
compatible = "lge,hammerhead", "qcom,msm8974";
|
|
|
|
aliases {
|
|
serial0 = &blsp1_uart1;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
smd {
|
|
rpm {
|
|
rpm_requests {
|
|
pm8841-regulators {
|
|
s1 {
|
|
regulator-min-microvolt = <675000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
s2 {
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
s3 {
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
s4 {
|
|
regulator-min-microvolt = <815000>;
|
|
regulator-max-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
pm8941-regulators {
|
|
vdd_l1_l3-supply = <&pm8941_s1>;
|
|
vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
|
|
vdd_l4_l11-supply = <&pm8941_s1>;
|
|
vdd_l5_l7-supply = <&pm8941_s2>;
|
|
vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
|
|
vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
|
|
vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
|
|
vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
|
|
vdd_l21-supply = <&vreg_boost>;
|
|
|
|
s1 {
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
s2 {
|
|
regulator-min-microvolt = <2150000>;
|
|
regulator-max-microvolt = <2150000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
|
|
s3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l1 {
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
l3 {
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
};
|
|
|
|
l4 {
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
};
|
|
|
|
l5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l8 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l9 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
l10 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
l11 {
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
};
|
|
|
|
l12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l13 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l14 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l15 {
|
|
regulator-min-microvolt = <2050000>;
|
|
regulator-max-microvolt = <2050000>;
|
|
};
|
|
|
|
l16 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
};
|
|
|
|
l17 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
|
|
l18 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
|
|
l19 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l20 {
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
|
|
regulator-boot-on;
|
|
regulator-system-load = <200000>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
l21 {
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l22 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l23 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
l24 {
|
|
regulator-min-microvolt = <3075000>;
|
|
regulator-max-microvolt = <3075000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
vreg_wlan: wlan-regulator {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "wl-reg";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wlan_regulator_pin>;
|
|
};
|
|
};
|
|
|
|
&soc {
|
|
serial@f991d000 {
|
|
status = "ok";
|
|
};
|
|
|
|
pinctrl@fd510000 {
|
|
sdhc1_pin_a: sdhc1-pin-active {
|
|
clk {
|
|
pins = "sdc1_clk";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd-data {
|
|
pins = "sdc1_cmd", "sdc1_data";
|
|
drive-strength = <10>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
sdhc2_pin_a: sdhc2-pin-active {
|
|
clk {
|
|
pins = "sdc2_clk";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd-data {
|
|
pins = "sdc2_cmd", "sdc2_data";
|
|
drive-strength = <6>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
i2c1_pins: i2c1 {
|
|
mux {
|
|
pins = "gpio2", "gpio3";
|
|
function = "blsp_i2c1";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c3_pins: i2c3 {
|
|
mux {
|
|
pins = "gpio10", "gpio11";
|
|
function = "blsp_i2c3";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c12_pins: i2c12 {
|
|
mux {
|
|
pins = "gpio87", "gpio88";
|
|
function = "blsp_i2c12";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
mpu6515_pin: mpu6515 {
|
|
irq {
|
|
pins = "gpio73";
|
|
function = "gpio";
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
};
|
|
};
|
|
|
|
sdhci@f9824900 {
|
|
status = "ok";
|
|
|
|
vmmc-supply = <&pm8941_l20>;
|
|
vqmmc-supply = <&pm8941_s3>;
|
|
|
|
bus-width = <8>;
|
|
non-removable;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdhc1_pin_a>;
|
|
};
|
|
|
|
sdhci@f98a4900 {
|
|
status = "ok";
|
|
|
|
max-frequency = <100000000>;
|
|
bus-width = <4>;
|
|
non-removable;
|
|
vmmc-supply = <&vreg_wlan>;
|
|
vqmmc-supply = <&pm8941_s3>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdhc2_pin_a>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
bcrmf@1 {
|
|
compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
|
|
reg = <1>;
|
|
|
|
brcm,drive-strength = <10>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wlan_sleep_clk_pin>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
input-name = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_keys_pin_a>;
|
|
|
|
volume-up {
|
|
label = "volume_up";
|
|
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
|
|
volume-down {
|
|
label = "volume_down";
|
|
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
};
|
|
|
|
i2c@f9968000 {
|
|
status = "ok";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c12_pins>;
|
|
clock-frequency = <100000>;
|
|
qcom,src-freq = <50000000>;
|
|
|
|
mpu6515@68 {
|
|
compatible = "invensense,mpu6515";
|
|
reg = <0x68>;
|
|
interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>;
|
|
vddio-supply = <&pm8941_lvs1>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mpu6515_pin>;
|
|
|
|
i2c-gate {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ak8963@f {
|
|
compatible = "asahi-kasei,ak8963";
|
|
reg = <0x0f>;
|
|
gpios = <&msmgpio 67 0>;
|
|
vid-supply = <&pm8941_lvs1>;
|
|
vdd-supply = <&pm8941_l17>;
|
|
};
|
|
|
|
bmp280@76 {
|
|
compatible = "bosch,bmp280";
|
|
reg = <0x76>;
|
|
vdda-supply = <&pm8941_lvs1>;
|
|
vddd-supply = <&pm8941_l17>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c@f9923000 {
|
|
status = "ok";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
clock-frequency = <100000>;
|
|
qcom,src-freq = <50000000>;
|
|
|
|
charger: bq24192@6b {
|
|
compatible = "ti,bq24192";
|
|
reg = <0x6b>;
|
|
interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
omit-battery-class;
|
|
|
|
usb_otg_vbus: usb-otg-vbus { };
|
|
};
|
|
};
|
|
|
|
i2c@f9925000 {
|
|
status = "ok";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c3_pins>;
|
|
clock-frequency = <100000>;
|
|
qcom,src-freq = <50000000>;
|
|
|
|
avago_apds993@39 {
|
|
compatible = "avago,apds9930";
|
|
reg = <0x39>;
|
|
interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
|
|
vdd-supply = <&pm8941_l17>;
|
|
vddio-supply = <&pm8941_lvs1>;
|
|
led-max-microamp = <100000>;
|
|
amstaos,proximity-diodes = <0>;
|
|
};
|
|
};
|
|
|
|
usb@f9a55000 {
|
|
status = "ok";
|
|
|
|
phys = <&usb_hs1_phy>;
|
|
phy-select = <&tcsr 0xb000 0>;
|
|
|
|
extcon = <&charger>, <&usb_id>;
|
|
vbus-supply = <&usb_otg_vbus>;
|
|
|
|
hnp-disable;
|
|
srp-disable;
|
|
adp-disable;
|
|
|
|
ulpi {
|
|
phy@a {
|
|
status = "ok";
|
|
|
|
v1p8-supply = <&pm8941_l6>;
|
|
v3p3-supply = <&pm8941_l24>;
|
|
|
|
qcom,init-seq = /bits/ 8 <0x1 0x64>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&spmi_bus {
|
|
pm8941@0 {
|
|
gpios@c000 {
|
|
gpio_keys_pin_a: gpio-keys-active {
|
|
pins = "gpio2", "gpio3";
|
|
function = "normal";
|
|
|
|
bias-pull-up;
|
|
power-source = <PM8941_GPIO_S3>;
|
|
};
|
|
|
|
wlan_sleep_clk_pin: wl-sleep-clk {
|
|
pins = "gpio16";
|
|
function = "func2";
|
|
|
|
output-high;
|
|
power-source = <PM8941_GPIO_S3>;
|
|
};
|
|
|
|
wlan_regulator_pin: wl-reg-active {
|
|
pins = "gpio17";
|
|
function = "normal";
|
|
|
|
bias-disable;
|
|
power-source = <PM8941_GPIO_S3>;
|
|
};
|
|
|
|
otg {
|
|
gpio-hog;
|
|
gpios = <35 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "otg-gpio";
|
|
};
|
|
};
|
|
};
|
|
};
|