Enric Balletbo i Serra 46f206304d drm/bridge: ps8640: Rework power state handling ... The get_edid() callback can be triggered anytime by an ioctl, i.e drm_mode_getconnector (ioctl) -> drm_helper_probe_single_connector_modes -> drm_bridge_connector_get_modes -> ps8640_bridge_get_edid Actually if the bridge pre_enable() function was not called before get_edid(), the driver will not be able to get the EDID properly and display will not work until a second get_edid() call is issued and if pre_enable() is called before. The side effect of this, for example, is that you see anything when `Frecon` starts, neither the splash screen, until the graphical session manager starts. To fix this we need to make sure that all we need is enabled before reading the EDID. This means the following: 1. If get_edid() is called before having the device powered we need to power on the device. In such case, the driver will power off again the device. 2. If get_edid() is called after having the device powered, all should just work. We added a powered flag in order to avoid recurrent calls to ps8640_bridge_poweron() and unneeded delays. 3. This seems to be specific for this device, but we need to make sure the panel is powered on before do a power on cycle on this device. Otherwise the device fails to retrieve the EDID. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Bilal Wasim <bwasim.lkml@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200827085911.944899-2-enric.balletbo@collabora.com		2020-09-15 15:12:24 +02:00
..
drm	drm/bridge: ps8640: Rework power state handling	2020-09-15 15:12:24 +02:00
host1x
ipu-v3
trace
vga
Makefile