mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
6d14d4d313
Rather than hard-coding the quirk topology, which stopped scaling, parse the information from DT. The code looks for all compatible PMICs -- da9063 and da9210 -- and checks if their IRQ line is tied to the same pin. If so, the code sends a matching sequence to the PMIC to deassert the IRQ. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> (on Koelsch) Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
225 lines
5.6 KiB
C
225 lines
5.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* R-Car Generation 2 da9063/da9210 regulator quirk
|
|
*
|
|
* Certain Gen2 development boards have an da9063 and one or more da9210
|
|
* regulators. All of these regulators have their interrupt request lines
|
|
* tied to the same interrupt pin (IRQ2) on the SoC.
|
|
*
|
|
* After cold boot or da9063-induced restart, both the da9063 and da9210 seem
|
|
* to assert their interrupt request lines. Hence as soon as one driver
|
|
* requests this irq, it gets stuck in an interrupt storm, as it only manages
|
|
* to deassert its own interrupt request line, and the other driver hasn't
|
|
* installed an interrupt handler yet.
|
|
*
|
|
* To handle this, install a quirk that masks the interrupts in both the
|
|
* da9063 and da9210. This quirk has to run after the i2c master driver has
|
|
* been initialized, but before the i2c slave drivers are initialized.
|
|
*
|
|
* Copyright (C) 2015 Glider bvba
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/list.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/mfd/da9063/registers.h>
|
|
|
|
#define IRQC_BASE 0xe61c0000
|
|
#define IRQC_MONITOR 0x104 /* IRQn Signal Level Monitor Register */
|
|
|
|
#define REGULATOR_IRQ_MASK BIT(2) /* IRQ2, active low */
|
|
|
|
/* start of DA9210 System Control and Event Registers */
|
|
#define DA9210_REG_MASK_A 0x54
|
|
|
|
struct regulator_quirk {
|
|
struct list_head list;
|
|
const struct of_device_id *id;
|
|
struct of_phandle_args irq_args;
|
|
struct i2c_msg i2c_msg;
|
|
bool shared; /* IRQ line is shared */
|
|
};
|
|
|
|
static LIST_HEAD(quirk_list);
|
|
static void __iomem *irqc;
|
|
|
|
/* first byte sets the memory pointer, following are consecutive reg values */
|
|
static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
|
|
static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
|
|
|
|
static struct i2c_msg da9063_msg = {
|
|
.len = ARRAY_SIZE(da9063_irq_clr),
|
|
.buf = da9063_irq_clr,
|
|
};
|
|
|
|
static struct i2c_msg da9210_msg = {
|
|
.len = ARRAY_SIZE(da9210_irq_clr),
|
|
.buf = da9210_irq_clr,
|
|
};
|
|
|
|
static const struct of_device_id rcar_gen2_quirk_match[] = {
|
|
{ .compatible = "dlg,da9063", .data = &da9063_msg },
|
|
{ .compatible = "dlg,da9210", .data = &da9210_msg },
|
|
{},
|
|
};
|
|
|
|
static int regulator_quirk_notify(struct notifier_block *nb,
|
|
unsigned long action, void *data)
|
|
{
|
|
struct regulator_quirk *pos, *tmp;
|
|
struct device *dev = data;
|
|
struct i2c_client *client;
|
|
static bool done;
|
|
int ret;
|
|
u32 mon;
|
|
|
|
if (done)
|
|
return 0;
|
|
|
|
mon = ioread32(irqc + IRQC_MONITOR);
|
|
dev_dbg(dev, "%s: %ld, IRQC_MONITOR = 0x%x\n", __func__, action, mon);
|
|
if (mon & REGULATOR_IRQ_MASK)
|
|
goto remove;
|
|
|
|
if (action != BUS_NOTIFY_ADD_DEVICE || dev->type == &i2c_adapter_type)
|
|
return 0;
|
|
|
|
client = to_i2c_client(dev);
|
|
dev_dbg(dev, "Detected %s\n", client->name);
|
|
|
|
/*
|
|
* Send message to all PMICs that share an IRQ line to deassert it.
|
|
*
|
|
* WARNING: This works only if all the PMICs are on the same I2C bus.
|
|
*/
|
|
list_for_each_entry(pos, &quirk_list, list) {
|
|
if (!pos->shared)
|
|
continue;
|
|
|
|
dev_info(&client->dev, "clearing %s@0x%02x interrupts\n",
|
|
pos->id->compatible, pos->i2c_msg.addr);
|
|
|
|
ret = i2c_transfer(client->adapter, &pos->i2c_msg, 1);
|
|
if (ret != 1)
|
|
dev_err(&client->dev, "i2c error %d\n", ret);
|
|
}
|
|
|
|
mon = ioread32(irqc + IRQC_MONITOR);
|
|
if (mon & REGULATOR_IRQ_MASK)
|
|
goto remove;
|
|
|
|
return 0;
|
|
|
|
remove:
|
|
dev_info(dev, "IRQ2 is not asserted, removing quirk\n");
|
|
|
|
list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
|
|
list_del(&pos->list);
|
|
kfree(pos);
|
|
}
|
|
|
|
done = true;
|
|
iounmap(irqc);
|
|
return 0;
|
|
}
|
|
|
|
static struct notifier_block regulator_quirk_nb = {
|
|
.notifier_call = regulator_quirk_notify
|
|
};
|
|
|
|
static int __init rcar_gen2_regulator_quirk(void)
|
|
{
|
|
struct regulator_quirk *quirk, *pos, *tmp;
|
|
struct of_phandle_args *argsa, *argsb;
|
|
const struct of_device_id *id;
|
|
struct device_node *np;
|
|
u32 mon, addr;
|
|
int ret;
|
|
|
|
if (!of_machine_is_compatible("renesas,koelsch") &&
|
|
!of_machine_is_compatible("renesas,lager") &&
|
|
!of_machine_is_compatible("renesas,stout") &&
|
|
!of_machine_is_compatible("renesas,gose"))
|
|
return -ENODEV;
|
|
|
|
for_each_matching_node_and_match(np, rcar_gen2_quirk_match, &id) {
|
|
if (!of_device_is_available(np))
|
|
break;
|
|
|
|
ret = of_property_read_u32(np, "reg", &addr);
|
|
if (ret) /* Skip invalid entry and continue */
|
|
continue;
|
|
|
|
quirk = kzalloc(sizeof(*quirk), GFP_KERNEL);
|
|
if (!quirk) {
|
|
ret = -ENOMEM;
|
|
goto err_mem;
|
|
}
|
|
|
|
argsa = &quirk->irq_args;
|
|
memcpy(&quirk->i2c_msg, id->data, sizeof(quirk->i2c_msg));
|
|
|
|
quirk->id = id;
|
|
quirk->i2c_msg.addr = addr;
|
|
|
|
ret = of_irq_parse_one(np, 0, argsa);
|
|
if (ret) { /* Skip invalid entry and continue */
|
|
kfree(quirk);
|
|
continue;
|
|
}
|
|
|
|
list_for_each_entry(pos, &quirk_list, list) {
|
|
argsb = &pos->irq_args;
|
|
|
|
if (argsa->args_count != argsb->args_count)
|
|
continue;
|
|
|
|
ret = memcmp(argsa->args, argsb->args,
|
|
argsa->args_count *
|
|
sizeof(argsa->args[0]));
|
|
if (!ret) {
|
|
pos->shared = true;
|
|
quirk->shared = true;
|
|
}
|
|
}
|
|
|
|
list_add_tail(&quirk->list, &quirk_list);
|
|
}
|
|
|
|
irqc = ioremap(IRQC_BASE, PAGE_SIZE);
|
|
if (!irqc) {
|
|
ret = -ENOMEM;
|
|
goto err_mem;
|
|
}
|
|
|
|
mon = ioread32(irqc + IRQC_MONITOR);
|
|
if (mon & REGULATOR_IRQ_MASK) {
|
|
pr_debug("%s: IRQ2 is not asserted, not installing quirk\n",
|
|
__func__);
|
|
ret = 0;
|
|
goto err_free;
|
|
}
|
|
|
|
pr_info("IRQ2 is asserted, installing da9063/da9210 regulator quirk\n");
|
|
|
|
bus_register_notifier(&i2c_bus_type, ®ulator_quirk_nb);
|
|
return 0;
|
|
|
|
err_free:
|
|
iounmap(irqc);
|
|
err_mem:
|
|
list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
|
|
list_del(&pos->list);
|
|
kfree(pos);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
arch_initcall(rcar_gen2_regulator_quirk);
|