mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-16 01:16:42 +07:00
96392c3d8c
Instead of passing a global GPIO number, pass a descriptor looked up from the device tree configuration node. Tested on Odroid U3 (with max77686 although not using any GPIOs for regulators, so at least default paths are not broken). Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
557 lines
16 KiB
C
557 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// max77686.c - Regulator driver for the Maxim 77686
|
|
//
|
|
// Copyright (C) 2012 Samsung Electronics
|
|
// Chiwoong Byun <woong.byun@samsung.com>
|
|
// Jonghwa Lee <jonghwa3.lee@samsung.com>
|
|
//
|
|
// This driver is based on max8997.c
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/mfd/max77686.h>
|
|
#include <linux/mfd/max77686-private.h>
|
|
|
|
#define MAX77686_LDO_MINUV 800000
|
|
#define MAX77686_LDO_UVSTEP 50000
|
|
#define MAX77686_LDO_LOW_MINUV 800000
|
|
#define MAX77686_LDO_LOW_UVSTEP 25000
|
|
#define MAX77686_BUCK_MINUV 750000
|
|
#define MAX77686_BUCK_UVSTEP 50000
|
|
#define MAX77686_BUCK_ENABLE_TIME 40 /* us */
|
|
#define MAX77686_DVS_ENABLE_TIME 22 /* us */
|
|
#define MAX77686_RAMP_DELAY 100000 /* uV/us */
|
|
#define MAX77686_DVS_RAMP_DELAY 27500 /* uV/us */
|
|
#define MAX77686_DVS_MINUV 600000
|
|
#define MAX77686_DVS_UVSTEP 12500
|
|
|
|
/*
|
|
* Value for configuring buck[89] and LDO{20,21,22} as GPIO control.
|
|
* It is the same as 'off' for other regulators.
|
|
*/
|
|
#define MAX77686_GPIO_CONTROL 0x0
|
|
/*
|
|
* Values used for configuring LDOs and bucks.
|
|
* Forcing low power mode: LDO1, 3-5, 9, 13, 17-26
|
|
*/
|
|
#define MAX77686_LDO_LOWPOWER 0x1
|
|
/*
|
|
* On/off controlled by PWRREQ:
|
|
* - LDO2, 6-8, 10-12, 14-16
|
|
* - buck[1234]
|
|
*/
|
|
#define MAX77686_OFF_PWRREQ 0x1
|
|
/* Low power mode controlled by PWRREQ: All LDOs */
|
|
#define MAX77686_LDO_LOWPOWER_PWRREQ 0x2
|
|
/* Forcing low power mode: buck[234] */
|
|
#define MAX77686_BUCK_LOWPOWER 0x2
|
|
#define MAX77686_NORMAL 0x3
|
|
|
|
#define MAX77686_OPMODE_SHIFT 6
|
|
#define MAX77686_OPMODE_BUCK234_SHIFT 4
|
|
#define MAX77686_OPMODE_MASK 0x3
|
|
|
|
#define MAX77686_VSEL_MASK 0x3F
|
|
#define MAX77686_DVS_VSEL_MASK 0xFF
|
|
|
|
#define MAX77686_RAMP_RATE_MASK 0xC0
|
|
|
|
#define MAX77686_REGULATORS MAX77686_REG_MAX
|
|
#define MAX77686_LDOS 26
|
|
|
|
enum max77686_ramp_rate {
|
|
RAMP_RATE_13P75MV,
|
|
RAMP_RATE_27P5MV,
|
|
RAMP_RATE_55MV,
|
|
RAMP_RATE_NO_CTRL, /* 100mV/us */
|
|
};
|
|
|
|
struct max77686_data {
|
|
struct device *dev;
|
|
DECLARE_BITMAP(gpio_enabled, MAX77686_REGULATORS);
|
|
|
|
/* Array indexed by regulator id */
|
|
unsigned int opmode[MAX77686_REGULATORS];
|
|
};
|
|
|
|
static unsigned int max77686_get_opmode_shift(int id)
|
|
{
|
|
switch (id) {
|
|
case MAX77686_BUCK1:
|
|
case MAX77686_BUCK5 ... MAX77686_BUCK9:
|
|
return 0;
|
|
case MAX77686_BUCK2 ... MAX77686_BUCK4:
|
|
return MAX77686_OPMODE_BUCK234_SHIFT;
|
|
default:
|
|
/* all LDOs */
|
|
return MAX77686_OPMODE_SHIFT;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* When regulator is configured for GPIO control then it
|
|
* replaces "normal" mode. Any change from low power mode to normal
|
|
* should actually change to GPIO control.
|
|
* Map normal mode to proper value for such regulators.
|
|
*/
|
|
static unsigned int max77686_map_normal_mode(struct max77686_data *max77686,
|
|
int id)
|
|
{
|
|
switch (id) {
|
|
case MAX77686_BUCK8:
|
|
case MAX77686_BUCK9:
|
|
case MAX77686_LDO20 ... MAX77686_LDO22:
|
|
if (test_bit(id, max77686->gpio_enabled))
|
|
return MAX77686_GPIO_CONTROL;
|
|
}
|
|
|
|
return MAX77686_NORMAL;
|
|
}
|
|
|
|
/* Some BUCKs and LDOs supports Normal[ON/OFF] mode during suspend */
|
|
static int max77686_set_suspend_disable(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int val, shift;
|
|
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
|
|
int ret, id = rdev_get_id(rdev);
|
|
|
|
shift = max77686_get_opmode_shift(id);
|
|
val = MAX77686_OFF_PWRREQ;
|
|
|
|
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
rdev->desc->enable_mask, val << shift);
|
|
if (ret)
|
|
return ret;
|
|
|
|
max77686->opmode[id] = val;
|
|
return 0;
|
|
}
|
|
|
|
/* Some LDOs supports [LPM/Normal]ON mode during suspend state */
|
|
static int max77686_set_suspend_mode(struct regulator_dev *rdev,
|
|
unsigned int mode)
|
|
{
|
|
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
|
|
unsigned int val;
|
|
int ret, id = rdev_get_id(rdev);
|
|
|
|
/* BUCK[5-9] doesn't support this feature */
|
|
if (id >= MAX77686_BUCK5)
|
|
return 0;
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_IDLE: /* ON in LP Mode */
|
|
val = MAX77686_LDO_LOWPOWER_PWRREQ;
|
|
break;
|
|
case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
|
|
val = max77686_map_normal_mode(max77686, id);
|
|
break;
|
|
default:
|
|
pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
|
|
rdev->desc->name, mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
rdev->desc->enable_mask,
|
|
val << MAX77686_OPMODE_SHIFT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
max77686->opmode[id] = val;
|
|
return 0;
|
|
}
|
|
|
|
/* Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state */
|
|
static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev,
|
|
unsigned int mode)
|
|
{
|
|
unsigned int val;
|
|
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
|
|
int ret, id = rdev_get_id(rdev);
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_STANDBY: /* switch off */
|
|
val = MAX77686_OFF_PWRREQ;
|
|
break;
|
|
case REGULATOR_MODE_IDLE: /* ON in LP Mode */
|
|
val = MAX77686_LDO_LOWPOWER_PWRREQ;
|
|
break;
|
|
case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
|
|
val = max77686_map_normal_mode(max77686, id);
|
|
break;
|
|
default:
|
|
pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
|
|
rdev->desc->name, mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
rdev->desc->enable_mask,
|
|
val << MAX77686_OPMODE_SHIFT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
max77686->opmode[id] = val;
|
|
return 0;
|
|
}
|
|
|
|
static int max77686_enable(struct regulator_dev *rdev)
|
|
{
|
|
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
|
|
unsigned int shift;
|
|
int id = rdev_get_id(rdev);
|
|
|
|
shift = max77686_get_opmode_shift(id);
|
|
|
|
if (max77686->opmode[id] == MAX77686_OFF_PWRREQ)
|
|
max77686->opmode[id] = max77686_map_normal_mode(max77686, id);
|
|
|
|
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
rdev->desc->enable_mask,
|
|
max77686->opmode[id] << shift);
|
|
}
|
|
|
|
static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
|
|
{
|
|
unsigned int ramp_value = RAMP_RATE_NO_CTRL;
|
|
|
|
switch (ramp_delay) {
|
|
case 1 ... 13750:
|
|
ramp_value = RAMP_RATE_13P75MV;
|
|
break;
|
|
case 13751 ... 27500:
|
|
ramp_value = RAMP_RATE_27P5MV;
|
|
break;
|
|
case 27501 ... 55000:
|
|
ramp_value = RAMP_RATE_55MV;
|
|
break;
|
|
case 55001 ... 100000:
|
|
break;
|
|
default:
|
|
pr_warn("%s: ramp_delay: %d not supported, setting 100000\n",
|
|
rdev->desc->name, ramp_delay);
|
|
}
|
|
|
|
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
MAX77686_RAMP_RATE_MASK, ramp_value << 6);
|
|
}
|
|
|
|
static int max77686_of_parse_cb(struct device_node *np,
|
|
const struct regulator_desc *desc,
|
|
struct regulator_config *config)
|
|
{
|
|
struct max77686_data *max77686 = config->driver_data;
|
|
|
|
switch (desc->id) {
|
|
case MAX77686_BUCK8:
|
|
case MAX77686_BUCK9:
|
|
case MAX77686_LDO20 ... MAX77686_LDO22:
|
|
config->ena_gpiod = devm_gpiod_get_from_of_node(max77686->dev,
|
|
np,
|
|
"maxim,ena",
|
|
0,
|
|
GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
|
|
"max77686-regulator");
|
|
if (IS_ERR(config->ena_gpiod))
|
|
config->ena_gpiod = NULL;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
if (config->ena_gpiod) {
|
|
set_bit(desc->id, max77686->gpio_enabled);
|
|
|
|
return regmap_update_bits(config->regmap, desc->enable_reg,
|
|
desc->enable_mask,
|
|
MAX77686_GPIO_CONTROL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct regulator_ops max77686_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = max77686_enable,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.set_suspend_mode = max77686_set_suspend_mode,
|
|
};
|
|
|
|
static const struct regulator_ops max77686_ldo_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = max77686_enable,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.set_suspend_mode = max77686_ldo_set_suspend_mode,
|
|
.set_suspend_disable = max77686_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_ops max77686_buck1_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = max77686_enable,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.set_suspend_disable = max77686_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_ops max77686_buck_dvs_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = max77686_enable,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.set_ramp_delay = max77686_set_ramp_delay,
|
|
.set_suspend_disable = max77686_set_suspend_disable,
|
|
};
|
|
|
|
#define regulator_desc_ldo(num) { \
|
|
.name = "LDO"#num, \
|
|
.of_match = of_match_ptr("LDO"#num), \
|
|
.regulators_node = of_match_ptr("voltage-regulators"), \
|
|
.of_parse_cb = max77686_of_parse_cb, \
|
|
.id = MAX77686_LDO##num, \
|
|
.ops = &max77686_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = MAX77686_LDO_MINUV, \
|
|
.uV_step = MAX77686_LDO_UVSTEP, \
|
|
.ramp_delay = MAX77686_RAMP_DELAY, \
|
|
.n_voltages = MAX77686_VSEL_MASK + 1, \
|
|
.vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
.vsel_mask = MAX77686_VSEL_MASK, \
|
|
.enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
.enable_mask = MAX77686_OPMODE_MASK \
|
|
<< MAX77686_OPMODE_SHIFT, \
|
|
}
|
|
#define regulator_desc_lpm_ldo(num) { \
|
|
.name = "LDO"#num, \
|
|
.of_match = of_match_ptr("LDO"#num), \
|
|
.regulators_node = of_match_ptr("voltage-regulators"), \
|
|
.id = MAX77686_LDO##num, \
|
|
.ops = &max77686_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = MAX77686_LDO_MINUV, \
|
|
.uV_step = MAX77686_LDO_UVSTEP, \
|
|
.ramp_delay = MAX77686_RAMP_DELAY, \
|
|
.n_voltages = MAX77686_VSEL_MASK + 1, \
|
|
.vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
.vsel_mask = MAX77686_VSEL_MASK, \
|
|
.enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
.enable_mask = MAX77686_OPMODE_MASK \
|
|
<< MAX77686_OPMODE_SHIFT, \
|
|
}
|
|
#define regulator_desc_ldo_low(num) { \
|
|
.name = "LDO"#num, \
|
|
.of_match = of_match_ptr("LDO"#num), \
|
|
.regulators_node = of_match_ptr("voltage-regulators"), \
|
|
.id = MAX77686_LDO##num, \
|
|
.ops = &max77686_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = MAX77686_LDO_LOW_MINUV, \
|
|
.uV_step = MAX77686_LDO_LOW_UVSTEP, \
|
|
.ramp_delay = MAX77686_RAMP_DELAY, \
|
|
.n_voltages = MAX77686_VSEL_MASK + 1, \
|
|
.vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
.vsel_mask = MAX77686_VSEL_MASK, \
|
|
.enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
.enable_mask = MAX77686_OPMODE_MASK \
|
|
<< MAX77686_OPMODE_SHIFT, \
|
|
}
|
|
#define regulator_desc_ldo1_low(num) { \
|
|
.name = "LDO"#num, \
|
|
.of_match = of_match_ptr("LDO"#num), \
|
|
.regulators_node = of_match_ptr("voltage-regulators"), \
|
|
.id = MAX77686_LDO##num, \
|
|
.ops = &max77686_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = MAX77686_LDO_LOW_MINUV, \
|
|
.uV_step = MAX77686_LDO_LOW_UVSTEP, \
|
|
.ramp_delay = MAX77686_RAMP_DELAY, \
|
|
.n_voltages = MAX77686_VSEL_MASK + 1, \
|
|
.vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
.vsel_mask = MAX77686_VSEL_MASK, \
|
|
.enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
.enable_mask = MAX77686_OPMODE_MASK \
|
|
<< MAX77686_OPMODE_SHIFT, \
|
|
}
|
|
#define regulator_desc_buck(num) { \
|
|
.name = "BUCK"#num, \
|
|
.of_match = of_match_ptr("BUCK"#num), \
|
|
.regulators_node = of_match_ptr("voltage-regulators"), \
|
|
.of_parse_cb = max77686_of_parse_cb, \
|
|
.id = MAX77686_BUCK##num, \
|
|
.ops = &max77686_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = MAX77686_BUCK_MINUV, \
|
|
.uV_step = MAX77686_BUCK_UVSTEP, \
|
|
.ramp_delay = MAX77686_RAMP_DELAY, \
|
|
.enable_time = MAX77686_BUCK_ENABLE_TIME, \
|
|
.n_voltages = MAX77686_VSEL_MASK + 1, \
|
|
.vsel_reg = MAX77686_REG_BUCK5OUT + (num - 5) * 2, \
|
|
.vsel_mask = MAX77686_VSEL_MASK, \
|
|
.enable_reg = MAX77686_REG_BUCK5CTRL + (num - 5) * 2, \
|
|
.enable_mask = MAX77686_OPMODE_MASK, \
|
|
}
|
|
#define regulator_desc_buck1(num) { \
|
|
.name = "BUCK"#num, \
|
|
.of_match = of_match_ptr("BUCK"#num), \
|
|
.regulators_node = of_match_ptr("voltage-regulators"), \
|
|
.id = MAX77686_BUCK##num, \
|
|
.ops = &max77686_buck1_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = MAX77686_BUCK_MINUV, \
|
|
.uV_step = MAX77686_BUCK_UVSTEP, \
|
|
.ramp_delay = MAX77686_RAMP_DELAY, \
|
|
.enable_time = MAX77686_BUCK_ENABLE_TIME, \
|
|
.n_voltages = MAX77686_VSEL_MASK + 1, \
|
|
.vsel_reg = MAX77686_REG_BUCK1OUT, \
|
|
.vsel_mask = MAX77686_VSEL_MASK, \
|
|
.enable_reg = MAX77686_REG_BUCK1CTRL, \
|
|
.enable_mask = MAX77686_OPMODE_MASK, \
|
|
}
|
|
#define regulator_desc_buck_dvs(num) { \
|
|
.name = "BUCK"#num, \
|
|
.of_match = of_match_ptr("BUCK"#num), \
|
|
.regulators_node = of_match_ptr("voltage-regulators"), \
|
|
.id = MAX77686_BUCK##num, \
|
|
.ops = &max77686_buck_dvs_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = MAX77686_DVS_MINUV, \
|
|
.uV_step = MAX77686_DVS_UVSTEP, \
|
|
.ramp_delay = MAX77686_DVS_RAMP_DELAY, \
|
|
.enable_time = MAX77686_DVS_ENABLE_TIME, \
|
|
.n_voltages = MAX77686_DVS_VSEL_MASK + 1, \
|
|
.vsel_reg = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10, \
|
|
.vsel_mask = MAX77686_DVS_VSEL_MASK, \
|
|
.enable_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \
|
|
.enable_mask = MAX77686_OPMODE_MASK \
|
|
<< MAX77686_OPMODE_BUCK234_SHIFT, \
|
|
}
|
|
|
|
static const struct regulator_desc regulators[] = {
|
|
regulator_desc_ldo1_low(1),
|
|
regulator_desc_ldo_low(2),
|
|
regulator_desc_ldo(3),
|
|
regulator_desc_ldo(4),
|
|
regulator_desc_ldo(5),
|
|
regulator_desc_ldo_low(6),
|
|
regulator_desc_ldo_low(7),
|
|
regulator_desc_ldo_low(8),
|
|
regulator_desc_ldo(9),
|
|
regulator_desc_lpm_ldo(10),
|
|
regulator_desc_lpm_ldo(11),
|
|
regulator_desc_lpm_ldo(12),
|
|
regulator_desc_ldo(13),
|
|
regulator_desc_lpm_ldo(14),
|
|
regulator_desc_ldo_low(15),
|
|
regulator_desc_lpm_ldo(16),
|
|
regulator_desc_ldo(17),
|
|
regulator_desc_ldo(18),
|
|
regulator_desc_ldo(19),
|
|
regulator_desc_ldo(20),
|
|
regulator_desc_ldo(21),
|
|
regulator_desc_ldo(22),
|
|
regulator_desc_ldo(23),
|
|
regulator_desc_ldo(24),
|
|
regulator_desc_ldo(25),
|
|
regulator_desc_ldo(26),
|
|
regulator_desc_buck1(1),
|
|
regulator_desc_buck_dvs(2),
|
|
regulator_desc_buck_dvs(3),
|
|
regulator_desc_buck_dvs(4),
|
|
regulator_desc_buck(5),
|
|
regulator_desc_buck(6),
|
|
regulator_desc_buck(7),
|
|
regulator_desc_buck(8),
|
|
regulator_desc_buck(9),
|
|
};
|
|
|
|
static int max77686_pmic_probe(struct platform_device *pdev)
|
|
{
|
|
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
|
|
struct max77686_data *max77686;
|
|
int i;
|
|
struct regulator_config config = { };
|
|
|
|
dev_dbg(&pdev->dev, "%s\n", __func__);
|
|
|
|
max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data),
|
|
GFP_KERNEL);
|
|
if (!max77686)
|
|
return -ENOMEM;
|
|
|
|
max77686->dev = &pdev->dev;
|
|
config.dev = iodev->dev;
|
|
config.regmap = iodev->regmap;
|
|
config.driver_data = max77686;
|
|
platform_set_drvdata(pdev, max77686);
|
|
|
|
for (i = 0; i < MAX77686_REGULATORS; i++) {
|
|
struct regulator_dev *rdev;
|
|
int id = regulators[i].id;
|
|
|
|
max77686->opmode[id] = MAX77686_NORMAL;
|
|
rdev = devm_regulator_register(&pdev->dev,
|
|
®ulators[i], &config);
|
|
if (IS_ERR(rdev)) {
|
|
int ret = PTR_ERR(rdev);
|
|
dev_err(&pdev->dev,
|
|
"regulator init failed for %d: %d\n", i, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id max77686_pmic_id[] = {
|
|
{"max77686-pmic", 0},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, max77686_pmic_id);
|
|
|
|
static struct platform_driver max77686_pmic_driver = {
|
|
.driver = {
|
|
.name = "max77686-pmic",
|
|
},
|
|
.probe = max77686_pmic_probe,
|
|
.id_table = max77686_pmic_id,
|
|
};
|
|
|
|
module_platform_driver(max77686_pmic_driver);
|
|
|
|
MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver");
|
|
MODULE_AUTHOR("Chiwoong Byun <woong.byun@samsung.com>");
|
|
MODULE_LICENSE("GPL");
|