linux_dsm_epyc7002/drivers/base/power
Paul E. McKenney 778935778c PM / runtime: Use _rcuidle for runtime suspend tracepoints
Further testing with false negatives suppressed by commit 293e2421fe
("rcu: Remove superfluous versions of rcu_read_lock_sched_held()")
identified a few more unprotected uses of RCU from the idle loop.
Because RCU actively ignores idle-loop code (for energy-efficiency
reasons, among other things), using RCU from the idle loop can result
in too-short grace periods, in turn resulting in arbitrary misbehavior.

The affected function is rpm_suspend().

The resulting lockdep-RCU splat is as follows:

------------------------------------------------------------------------

Warning from omap3

===============================
[ INFO: suspicious RCU usage. ]
4.6.0-rc5-next-20160426+ #1112 Not tainted
-------------------------------
include/trace/events/rpm.h:63 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

RCU used illegally from idle CPU!
rcu_scheduler_active = 1, debug_locks = 0
RCU used illegally from extended quiescent state!
1 lock held by swapper/0/0:
 #0:  (&(&dev->power.lock)->rlock){-.-...}, at: [<c052ee24>] __pm_runtime_suspend+0x54/0x84

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1112
Hardware name: Generic OMAP36xx (Flattened Device Tree)
[<c0110308>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
[<c010c3a8>] (show_stack) from [<c047fec8>] (dump_stack+0xb0/0xe4)
[<c047fec8>] (dump_stack) from [<c052d7b4>] (rpm_suspend+0x604/0x7e4)
[<c052d7b4>] (rpm_suspend) from [<c052ee34>] (__pm_runtime_suspend+0x64/0x84)
[<c052ee34>] (__pm_runtime_suspend) from [<c04bf3bc>] (omap2_gpio_prepare_for_idle+0x5c/0x70)
[<c04bf3bc>] (omap2_gpio_prepare_for_idle) from [<c01255e8>] (omap_sram_idle+0x140/0x244)
[<c01255e8>] (omap_sram_idle) from [<c0126b48>] (omap3_enter_idle_bm+0xfc/0x1ec)
[<c0126b48>] (omap3_enter_idle_bm) from [<c0601db8>] (cpuidle_enter_state+0x80/0x3d4)
[<c0601db8>] (cpuidle_enter_state) from [<c0183c74>] (cpu_startup_entry+0x198/0x3a0)
[<c0183c74>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
[<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)

------------------------------------------------------------------------

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-16 02:59:58 +02:00
..
opp PM / OPP: optimize dev_pm_opp_set_rate() performance a bit 2016-07-28 23:54:16 +02:00
clock_ops.c PM / clk: Add support for adding a specific clock from device-tree 2016-06-28 00:42:10 +02:00
common.c PM: Avoid false-positive warnings in dev_pm_domain_set() 2016-02-03 19:10:37 +01:00
domain_governor.c PM / Domains: Rename stop_ok to suspend_ok for the genpd governor 2016-04-22 02:29:17 +02:00
domain.c PM / Domains: Convert pm_genpd_init() to return an error code 2016-06-29 02:15:19 +02:00
generic_ops.c PM / PCI / ACPI: Kick devices that might have been reset by firmware 2015-10-14 02:17:34 +02:00
main.c PM / sleep: Handle failures in device_suspend_late() consistently 2016-05-20 23:09:49 +02:00
Makefile PM / OPP: Move opp core to its own directory 2015-09-15 02:03:16 +02:00
power.h PM / sleep: Go direct_complete if driver has no callbacks 2016-01-08 01:12:06 +01:00
qos.c PM / QoS: Make it possible to expose device latency tolerance to userspace 2015-07-28 08:50:41 +01:00
runtime.c PM / runtime: Use _rcuidle for runtime suspend tracepoints 2016-09-16 02:59:58 +02:00
sysfs.c PM / QoS: Make it possible to expose device latency tolerance to userspace 2015-07-28 08:50:41 +01:00
trace.c char/genrtc: x86: remove remnants of asm/rtc.h 2016-06-04 00:20:07 +02:00
wakeirq.c PM / wakeirq: check that wake IRQ is valid before accepting it 2015-11-16 23:10:20 +01:00
wakeup.c PM-wakeup: Delete unnecessary checks before three function calls 2016-07-28 23:51:04 +02:00