linux_dsm_epyc7002/drivers/bcma
Chuhong Yuan 9236c1250c bcma: Use dev_get_drvdata
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-06 15:25:28 +03:00
..
bcma_private.h bcma: use dev_* printing functions 2019-01-10 13:39:19 +02:00
core.c
driver_chipcommon_b.c bcma: define ChipCommon B MII registers 2016-07-19 21:13:10 +03:00
driver_chipcommon_nflash.c
driver_chipcommon_pflash.c bcma: move parallel flash support to separated file 2016-03-07 14:41:08 +02:00
driver_chipcommon_pmu.c bcma: Replace mdelay with usleep_range in bcma_pmu_resources_init 2018-02-27 15:52:13 +02:00
driver_chipcommon_sflash.c mtd: bcm47xxsflash: use ioremap_cache() instead of KSEG0ADDR() 2016-04-04 00:07:57 -07:00
driver_chipcommon.c Revert "bcma: init serial console directly from ChipCommon code" 2017-01-17 14:23:44 +02:00
driver_gmac_cmn.c
driver_gpio.c bcma: keep a direct pointer to the struct device 2019-01-10 13:39:18 +02:00
driver_mips.c bcma: fix buffer size caused crash in bcma_core_mips_print_irq() 2018-05-12 11:36:59 +03:00
driver_pci_host.c bcma: add missing includes 2015-03-03 15:26:38 +02:00
driver_pci.c bcma: move PCI IRQ control function to host specific code 2015-03-13 16:25:50 +02:00
driver_pcie2.c bcma: Adjust block comment 2017-12-07 15:33:02 +02:00
host_pci.c bcma: Use dev_get_drvdata 2019-08-06 15:25:28 +03:00
host_soc.c bcma: keep a direct pointer to the struct device 2019-01-10 13:39:18 +02:00
Kconfig bcma: Allow selection of this driver when COMPILE_TEST=y 2018-07-18 09:34:19 +02:00
main.c bcma: keep a direct pointer to the struct device 2019-01-10 13:39:18 +02:00
Makefile License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
README
scan.c bcma: support chipsets with PMU and GCI cores (devices) 2016-02-06 13:34:51 +02:00
scan.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sprom.c bcma: detect SPROM revision 11 2015-01-29 10:49:28 +02:00
TODO

Broadcom introduced new bus as replacement for older SSB. It is based on AMBA,
however from programming point of view there is nothing AMBA specific we use.

Standard AMBA drivers are platform specific, have hardcoded addresses and use
AMBA standard fields like CID and PID.

In case of Broadcom's cards every device consists of:
1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated
   as standard AMBA device. Reading it's CID or PID can cause machine lockup.
2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID)
   and PIDs (0x103BB369), but we do not use that info for anything. One of that
   devices is used for managing Broadcom specific core.

Addresses of AMBA devices are not hardcoded in driver and have to be read from
EPROM.

In this situation we decided to introduce separated bus. It can contain up to
16 devices identified by Broadcom specific fields: manufacturer, id, revision
and class.