mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
4a0e3e989d
NCM specs are not actually mandating a specific position in the frame for the NDP (Network Datagram Pointer). However, some Huawei devices will ignore our aggregates if it is not placed after the datagrams it points to. Add support for doing just this, in a per-device configurable way. While at it, update NCM subdrivers, disabling this functionality in all of them, except in huawei_cdc_ncm where it is enabled instead. We aren't making any distinction between different Huawei NCM devices, based on what the vendor driver does. Standard NCM devices are left unaffected: if they are compliant, they should be always usable, still stay on the safe side. This change has been tested and working with a Huawei E3131 device (which works regardless of NDP position), a Huawei E3531 (also working both ways) and an E3372 (which mandates NDP to be after indexed datagrams). V1->V2: - corrected wrong NDP acronym definition - fixed possible NULL pointer dereference - patch cleanup V2->V3: - Properly account for the NDP size when writing new packets to SKB Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
225 lines
6.2 KiB
C
225 lines
6.2 KiB
C
/* huawei_cdc_ncm.c - handles Huawei devices using the CDC NCM protocol as
|
|
* transport layer.
|
|
* Copyright (C) 2013 Enrico Mioso <mrkiko.rs@gmail.com>
|
|
*
|
|
*
|
|
* ABSTRACT:
|
|
* This driver handles devices resembling the CDC NCM standard, but
|
|
* encapsulating another protocol inside it. An example are some Huawei 3G
|
|
* devices, exposing an embedded AT channel where you can set up the NCM
|
|
* connection.
|
|
* This code has been heavily inspired by the cdc_mbim.c driver, which is
|
|
* Copyright (c) 2012 Smith Micro Software, Inc.
|
|
* Copyright (c) 2012 Bjørn Mork <bjorn@mork.no>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/cdc.h>
|
|
#include <linux/usb/usbnet.h>
|
|
#include <linux/usb/cdc-wdm.h>
|
|
#include <linux/usb/cdc_ncm.h>
|
|
|
|
/* Driver data */
|
|
struct huawei_cdc_ncm_state {
|
|
struct cdc_ncm_ctx *ctx;
|
|
atomic_t pmcount;
|
|
struct usb_driver *subdriver;
|
|
struct usb_interface *control;
|
|
struct usb_interface *data;
|
|
};
|
|
|
|
static int huawei_cdc_ncm_manage_power(struct usbnet *usbnet_dev, int on)
|
|
{
|
|
struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
|
|
int rv;
|
|
|
|
if ((on && atomic_add_return(1, &drvstate->pmcount) == 1) ||
|
|
(!on && atomic_dec_and_test(&drvstate->pmcount))) {
|
|
rv = usb_autopm_get_interface(usbnet_dev->intf);
|
|
usbnet_dev->intf->needs_remote_wakeup = on;
|
|
if (!rv)
|
|
usb_autopm_put_interface(usbnet_dev->intf);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int huawei_cdc_ncm_wdm_manage_power(struct usb_interface *intf,
|
|
int status)
|
|
{
|
|
struct usbnet *usbnet_dev = usb_get_intfdata(intf);
|
|
|
|
/* can be called while disconnecting */
|
|
if (!usbnet_dev)
|
|
return 0;
|
|
|
|
return huawei_cdc_ncm_manage_power(usbnet_dev, status);
|
|
}
|
|
|
|
|
|
static int huawei_cdc_ncm_bind(struct usbnet *usbnet_dev,
|
|
struct usb_interface *intf)
|
|
{
|
|
struct cdc_ncm_ctx *ctx;
|
|
struct usb_driver *subdriver = ERR_PTR(-ENODEV);
|
|
int ret = -ENODEV;
|
|
struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
|
|
int drvflags = 0;
|
|
|
|
/* altsetting should always be 1 for NCM devices - so we hard-coded
|
|
* it here. Some huawei devices will need the NDP part of the NCM package to
|
|
* be at the end of the frame.
|
|
*/
|
|
drvflags |= CDC_NCM_FLAG_NDP_TO_END;
|
|
ret = cdc_ncm_bind_common(usbnet_dev, intf, 1, drvflags);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ctx = drvstate->ctx;
|
|
|
|
if (usbnet_dev->status)
|
|
/* The wMaxCommand buffer must be big enough to hold
|
|
* any message from the modem. Experience has shown
|
|
* that some replies are more than 256 bytes long
|
|
*/
|
|
subdriver = usb_cdc_wdm_register(ctx->control,
|
|
&usbnet_dev->status->desc,
|
|
1024, /* wMaxCommand */
|
|
huawei_cdc_ncm_wdm_manage_power);
|
|
if (IS_ERR(subdriver)) {
|
|
ret = PTR_ERR(subdriver);
|
|
cdc_ncm_unbind(usbnet_dev, intf);
|
|
goto err;
|
|
}
|
|
|
|
/* Prevent usbnet from using the status descriptor */
|
|
usbnet_dev->status = NULL;
|
|
|
|
drvstate->subdriver = subdriver;
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static void huawei_cdc_ncm_unbind(struct usbnet *usbnet_dev,
|
|
struct usb_interface *intf)
|
|
{
|
|
struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
|
|
struct cdc_ncm_ctx *ctx = drvstate->ctx;
|
|
|
|
if (drvstate->subdriver && drvstate->subdriver->disconnect)
|
|
drvstate->subdriver->disconnect(ctx->control);
|
|
drvstate->subdriver = NULL;
|
|
|
|
cdc_ncm_unbind(usbnet_dev, intf);
|
|
}
|
|
|
|
static int huawei_cdc_ncm_suspend(struct usb_interface *intf,
|
|
pm_message_t message)
|
|
{
|
|
int ret = 0;
|
|
struct usbnet *usbnet_dev = usb_get_intfdata(intf);
|
|
struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
|
|
struct cdc_ncm_ctx *ctx = drvstate->ctx;
|
|
|
|
if (ctx == NULL) {
|
|
ret = -ENODEV;
|
|
goto error;
|
|
}
|
|
|
|
ret = usbnet_suspend(intf, message);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
if (intf == ctx->control &&
|
|
drvstate->subdriver &&
|
|
drvstate->subdriver->suspend)
|
|
ret = drvstate->subdriver->suspend(intf, message);
|
|
if (ret < 0)
|
|
usbnet_resume(intf);
|
|
|
|
error:
|
|
return ret;
|
|
}
|
|
|
|
static int huawei_cdc_ncm_resume(struct usb_interface *intf)
|
|
{
|
|
int ret = 0;
|
|
struct usbnet *usbnet_dev = usb_get_intfdata(intf);
|
|
struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
|
|
bool callsub;
|
|
struct cdc_ncm_ctx *ctx = drvstate->ctx;
|
|
|
|
/* should we call subdriver's resume function? */
|
|
callsub =
|
|
(intf == ctx->control &&
|
|
drvstate->subdriver &&
|
|
drvstate->subdriver->resume);
|
|
|
|
if (callsub)
|
|
ret = drvstate->subdriver->resume(intf);
|
|
if (ret < 0)
|
|
goto err;
|
|
ret = usbnet_resume(intf);
|
|
if (ret < 0 && callsub)
|
|
drvstate->subdriver->suspend(intf, PMSG_SUSPEND);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static const struct driver_info huawei_cdc_ncm_info = {
|
|
.description = "Huawei CDC NCM device",
|
|
.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
|
|
.bind = huawei_cdc_ncm_bind,
|
|
.unbind = huawei_cdc_ncm_unbind,
|
|
.manage_power = huawei_cdc_ncm_manage_power,
|
|
.rx_fixup = cdc_ncm_rx_fixup,
|
|
.tx_fixup = cdc_ncm_tx_fixup,
|
|
};
|
|
|
|
static const struct usb_device_id huawei_cdc_ncm_devs[] = {
|
|
/* Huawei NCM devices disguised as vendor specific */
|
|
{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x16),
|
|
.driver_info = (unsigned long)&huawei_cdc_ncm_info,
|
|
},
|
|
{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x46),
|
|
.driver_info = (unsigned long)&huawei_cdc_ncm_info,
|
|
},
|
|
{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x76),
|
|
.driver_info = (unsigned long)&huawei_cdc_ncm_info,
|
|
},
|
|
{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x03, 0x16),
|
|
.driver_info = (unsigned long)&huawei_cdc_ncm_info,
|
|
},
|
|
|
|
/* Terminating entry */
|
|
{
|
|
},
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, huawei_cdc_ncm_devs);
|
|
|
|
static struct usb_driver huawei_cdc_ncm_driver = {
|
|
.name = "huawei_cdc_ncm",
|
|
.id_table = huawei_cdc_ncm_devs,
|
|
.probe = usbnet_probe,
|
|
.disconnect = usbnet_disconnect,
|
|
.suspend = huawei_cdc_ncm_suspend,
|
|
.resume = huawei_cdc_ncm_resume,
|
|
.reset_resume = huawei_cdc_ncm_resume,
|
|
.supports_autosuspend = 1,
|
|
.disable_hub_initiated_lpm = 1,
|
|
};
|
|
module_usb_driver(huawei_cdc_ncm_driver);
|
|
MODULE_AUTHOR("Enrico Mioso <mrkiko.rs@gmail.com>");
|
|
MODULE_DESCRIPTION("USB CDC NCM host driver with encapsulated protocol support");
|
|
MODULE_LICENSE("GPL");
|