AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-05 08:36:47 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
45b4b782e8
linux_dsm_epyc7002/drivers/clocksource/timer-u300.c
Linus Torvalds 2d1eb87ae1 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm 
Pull ARM changes from Russell King:

 - Perf updates from Will Deacon:
   - Support for Qualcomm Krait processors (run perf on your phone!)
   - Support for Cortex-A12 (run perf stat on your FPGA!)
   - Support for perf_sample_event_took, allowing us to automatically decrease
     the sample rate if we can't handle the PMU interrupts quickly enough
     (run perf record on your FPGA!).

 - Basic uprobes support from David Long:
     This patch series adds basic uprobes support to ARM. It is based on
     patches developed earlier by Rabin Vincent. That approach of adding
     hooks into the kprobes instruction parsing code was not well received.
     This approach separates the ARM instruction parsing code in kprobes out
     into a separate set of functions which can be used by both kprobes and
     uprobes. Both kprobes and uprobes then provide their own semantic action
     tables to process the results of the parsing.

 - ARMv7M (microcontroller) updates from Uwe Kleine-König

 - OMAP DMA updates (recently added Vinod's Ack even though they've been
   sitting in linux-next for a few months) to reduce the reliance of
   omap-dma on the code in arch/arm.

 - SA11x0 changes from Dmitry Eremin-Solenikov and Alexander Shiyan

 - Support for Cortex-A12 CPU

 - Align support for ARMv6 with ARMv7 so they can cooperate better in a
   single zImage.

 - Addition of first AT_HWCAP2 feature bits for ARMv8 crypto support.

 - Removal of IRQ_DISABLED from various ARM files

 - Improved efficiency of virt_to_page() for single zImage

 - Patch from Ulf Hansson to permit runtime PM callbacks to be available for
   AMBA devices for suspend/resume as well.

 - Finally kill asm/system.h on ARM.

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (89 commits)
  dmaengine: omap-dma: more consolidation of CCR register setup
  dmaengine: omap-dma: move IRQ handling to omap-dma
  dmaengine: omap-dma: move register read/writes into omap-dma.c
  ARM: omap: dma: get rid of 'p' allocation and clean up
  ARM: omap: move dma channel allocation into plat-omap code
  ARM: omap: dma: get rid of errata global
  ARM: omap: clean up DMA register accesses
  ARM: omap: remove almost-const variables
  ARM: omap: remove references to disable_irq_lch
  dmaengine: omap-dma: cleanup errata 3.3 handling
  dmaengine: omap-dma: provide register read/write functions
  dmaengine: omap-dma: use cached CCR value when enabling DMA
  dmaengine: omap-dma: move barrier to omap_dma_start_desc()
  dmaengine: omap-dma: move clnk_ctrl setting to preparation functions
  dmaengine: omap-dma: improve efficiency loading C.SA/C.EI/C.FI registers
  dmaengine: omap-dma: consolidate clearing channel status register
  dmaengine: omap-dma: move CCR buffering disable errata out of the fast path
  dmaengine: omap-dma: provide register definitions
  dmaengine: omap-dma: consolidate setup of CCR
  dmaengine: omap-dma: consolidate setup of CSDP
  ...
2014-04-05 13:20:43 -07:00

448 lines
16 KiB
C
Raw Blame History

/*
* Copyright (C) 2007-2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* Timer COH 901 328, runs the OS timer interrupt.
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/types.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/sched_clock.h>
/* Generic stuff */
#include <asm/mach/map.h>
#include <asm/mach/time.h>
/*
* APP side special timer registers
* This timer contains four timers which can fire an interrupt each.
* OS (operating system) timer @ 32768 Hz
* DD (device driver) timer @ 1 kHz
* GP1 (general purpose 1) timer @ 1MHz
* GP2 (general purpose 2) timer @ 1MHz
*/
/* Reset OS Timer 32bit (-/W) */
#define U300_TIMER_APP_ROST (0x0000)
#define U300_TIMER_APP_ROST_TIMER_RESET (0x00000000)
/* Enable OS Timer 32bit (-/W) */
#define U300_TIMER_APP_EOST (0x0004)
#define U300_TIMER_APP_EOST_TIMER_ENABLE (0x00000000)
/* Disable OS Timer 32bit (-/W) */
#define U300_TIMER_APP_DOST (0x0008)
#define U300_TIMER_APP_DOST_TIMER_DISABLE (0x00000000)
/* OS Timer Mode Register 32bit (-/W) */
#define U300_TIMER_APP_SOSTM (0x000c)
#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS (0x00000000)
#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT (0x00000001)
/* OS Timer Status Register 32bit (R/-) */
#define U300_TIMER_APP_OSTS (0x0010)
#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK (0x0000000F)
#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE (0x00000001)
#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE (0x00000002)
#define U300_TIMER_APP_OSTS_ENABLE_IND (0x00000010)
#define U300_TIMER_APP_OSTS_MODE_MASK (0x00000020)
#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS (0x00000000)
#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT (0x00000020)
#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND (0x00000040)
#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND (0x00000080)
/* OS Timer Current Count Register 32bit (R/-) */
#define U300_TIMER_APP_OSTCC (0x0014)
/* OS Timer Terminal Count Register 32bit (R/W) */
#define U300_TIMER_APP_OSTTC (0x0018)
/* OS Timer Interrupt Enable Register 32bit (-/W) */
#define U300_TIMER_APP_OSTIE (0x001c)
#define U300_TIMER_APP_OSTIE_IRQ_DISABLE (0x00000000)
#define U300_TIMER_APP_OSTIE_IRQ_ENABLE (0x00000001)
/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */
#define U300_TIMER_APP_OSTIA (0x0020)
#define U300_TIMER_APP_OSTIA_IRQ_ACK (0x00000080)
/* Reset DD Timer 32bit (-/W) */
#define U300_TIMER_APP_RDDT (0x0040)
#define U300_TIMER_APP_RDDT_TIMER_RESET (0x00000000)
/* Enable DD Timer 32bit (-/W) */
#define U300_TIMER_APP_EDDT (0x0044)
#define U300_TIMER_APP_EDDT_TIMER_ENABLE (0x00000000)
/* Disable DD Timer 32bit (-/W) */
#define U300_TIMER_APP_DDDT (0x0048)
#define U300_TIMER_APP_DDDT_TIMER_DISABLE (0x00000000)
/* DD Timer Mode Register 32bit (-/W) */
#define U300_TIMER_APP_SDDTM (0x004c)
#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS (0x00000000)
#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT (0x00000001)
/* DD Timer Status Register 32bit (R/-) */
#define U300_TIMER_APP_DDTS (0x0050)
#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK (0x0000000F)
#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE (0x00000001)
#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE (0x00000002)
#define U300_TIMER_APP_DDTS_ENABLE_IND (0x00000010)
#define U300_TIMER_APP_DDTS_MODE_MASK (0x00000020)
#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS (0x00000000)
#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT (0x00000020)
#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND (0x00000040)
#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND (0x00000080)
/* DD Timer Current Count Register 32bit (R/-) */
#define U300_TIMER_APP_DDTCC (0x0054)
/* DD Timer Terminal Count Register 32bit (R/W) */
#define U300_TIMER_APP_DDTTC (0x0058)
/* DD Timer Interrupt Enable Register 32bit (-/W) */
#define U300_TIMER_APP_DDTIE (0x005c)
#define U300_TIMER_APP_DDTIE_IRQ_DISABLE (0x00000000)
#define U300_TIMER_APP_DDTIE_IRQ_ENABLE (0x00000001)
/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */
#define U300_TIMER_APP_DDTIA (0x0060)
#define U300_TIMER_APP_DDTIA_IRQ_ACK (0x00000080)
/* Reset GP1 Timer 32bit (-/W) */
#define U300_TIMER_APP_RGPT1 (0x0080)
#define U300_TIMER_APP_RGPT1_TIMER_RESET (0x00000000)
/* Enable GP1 Timer 32bit (-/W) */
#define U300_TIMER_APP_EGPT1 (0x0084)
#define U300_TIMER_APP_EGPT1_TIMER_ENABLE (0x00000000)
/* Disable GP1 Timer 32bit (-/W) */
#define U300_TIMER_APP_DGPT1 (0x0088)
#define U300_TIMER_APP_DGPT1_TIMER_DISABLE (0x00000000)
/* GP1 Timer Mode Register 32bit (-/W) */
#define U300_TIMER_APP_SGPT1M (0x008c)
#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS (0x00000000)
#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT (0x00000001)
/* GP1 Timer Status Register 32bit (R/-) */
#define U300_TIMER_APP_GPT1S (0x0090)
#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK (0x0000000F)
#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE (0x00000001)
#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE (0x00000002)
#define U300_TIMER_APP_GPT1S_ENABLE_IND (0x00000010)
#define U300_TIMER_APP_GPT1S_MODE_MASK (0x00000020)
#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS (0x00000000)
#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT (0x00000020)
#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND (0x00000040)
#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND (0x00000080)
/* GP1 Timer Current Count Register 32bit (R/-) */
#define U300_TIMER_APP_GPT1CC (0x0094)
/* GP1 Timer Terminal Count Register 32bit (R/W) */
#define U300_TIMER_APP_GPT1TC (0x0098)
/* GP1 Timer Interrupt Enable Register 32bit (-/W) */
#define U300_TIMER_APP_GPT1IE (0x009c)
#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE (0x00000000)
#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE (0x00000001)
/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */
#define U300_TIMER_APP_GPT1IA (0x00a0)
#define U300_TIMER_APP_GPT1IA_IRQ_ACK (0x00000080)
/* Reset GP2 Timer 32bit (-/W) */
#define U300_TIMER_APP_RGPT2 (0x00c0)
#define U300_TIMER_APP_RGPT2_TIMER_RESET (0x00000000)
/* Enable GP2 Timer 32bit (-/W) */
#define U300_TIMER_APP_EGPT2 (0x00c4)
#define U300_TIMER_APP_EGPT2_TIMER_ENABLE (0x00000000)
/* Disable GP2 Timer 32bit (-/W) */
#define U300_TIMER_APP_DGPT2 (0x00c8)
#define U300_TIMER_APP_DGPT2_TIMER_DISABLE (0x00000000)
/* GP2 Timer Mode Register 32bit (-/W) */
#define U300_TIMER_APP_SGPT2M (0x00cc)
#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS (0x00000000)
#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT (0x00000001)
/* GP2 Timer Status Register 32bit (R/-) */
#define U300_TIMER_APP_GPT2S (0x00d0)
#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK (0x0000000F)
#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE (0x00000001)
#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE (0x00000002)
#define U300_TIMER_APP_GPT2S_ENABLE_IND (0x00000010)
#define U300_TIMER_APP_GPT2S_MODE_MASK (0x00000020)
#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS (0x00000000)
#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT (0x00000020)
#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND (0x00000040)
#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND (0x00000080)
/* GP2 Timer Current Count Register 32bit (R/-) */
#define U300_TIMER_APP_GPT2CC (0x00d4)
/* GP2 Timer Terminal Count Register 32bit (R/W) */
#define U300_TIMER_APP_GPT2TC (0x00d8)
/* GP2 Timer Interrupt Enable Register 32bit (-/W) */
#define U300_TIMER_APP_GPT2IE (0x00dc)
#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE (0x00000000)
#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE (0x00000001)
/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */
#define U300_TIMER_APP_GPT2IA (0x00e0)
#define U300_TIMER_APP_GPT2IA_IRQ_ACK (0x00000080)
/* Clock request control register - all four timers */
#define U300_TIMER_APP_CRC (0x100)
#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE (0x00000001)
static void __iomem *u300_timer_base;
struct u300_clockevent_data {
struct clock_event_device cevd;
unsigned ticks_per_jiffy;
};
/*
* The u300_set_mode() function is always called first, if we
* have oneshot timer active, the oneshot scheduling function
* u300_set_next_event() is called immediately after.
*/
static void u300_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
struct u300_clockevent_data *cevdata =
container_of(evt, struct u300_clockevent_data, cevd);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
/* Disable interrupts on GPT1 */
writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
u300_timer_base + U300_TIMER_APP_GPT1IE);
/* Disable GP1 while we're reprogramming it. */
writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
u300_timer_base + U300_TIMER_APP_DGPT1);
/*
* Set the periodic mode to a certain number of ticks per
* jiffy.
*/
writel(cevdata->ticks_per_jiffy,
u300_timer_base + U300_TIMER_APP_GPT1TC);
/*
* Set continuous mode, so the timer keeps triggering
* interrupts.
*/
writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
u300_timer_base + U300_TIMER_APP_SGPT1M);
/* Enable timer interrupts */
writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
u300_timer_base + U300_TIMER_APP_GPT1IE);
/* Then enable the OS timer again */
writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
u300_timer_base + U300_TIMER_APP_EGPT1);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* Just break; here? */
/*
* The actual event will be programmed by the next event hook,
* so we just set a dummy value somewhere at the end of the
* universe here.
*/
/* Disable interrupts on GPT1 */
writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
u300_timer_base + U300_TIMER_APP_GPT1IE);
/* Disable GP1 while we're reprogramming it. */
writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
u300_timer_base + U300_TIMER_APP_DGPT1);
/*
* Expire far in the future, u300_set_next_event() will be
* called soon...
*/
writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC);
/* We run one shot per tick here! */
writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
u300_timer_base + U300_TIMER_APP_SGPT1M);
/* Enable interrupts for this timer */
writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
u300_timer_base + U300_TIMER_APP_GPT1IE);
/* Enable timer */
writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
u300_timer_base + U300_TIMER_APP_EGPT1);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
/* Disable interrupts on GP1 */
writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
u300_timer_base + U300_TIMER_APP_GPT1IE);
/* Disable GP1 */
writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
u300_timer_base + U300_TIMER_APP_DGPT1);
break;
case CLOCK_EVT_MODE_RESUME:
/* Ignore this call */
break;
}
}
/*
* The app timer in one shot mode obviously has to be reprogrammed
* in EXACTLY this sequence to work properly. Do NOT try to e.g. replace
* the interrupt disable + timer disable commands with a reset command,
* it will fail miserably. Apparently (and I found this the hard way)
* the timer is very sensitive to the instruction order, though you don't
* get that impression from the data sheet.
*/
static int u300_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
/* Disable interrupts on GPT1 */
writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
u300_timer_base + U300_TIMER_APP_GPT1IE);
/* Disable GP1 while we're reprogramming it. */
writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
u300_timer_base + U300_TIMER_APP_DGPT1);
/* Reset the General Purpose timer 1. */
writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
u300_timer_base + U300_TIMER_APP_RGPT1);
/* IRQ in n * cycles */
writel(cycles, u300_timer_base + U300_TIMER_APP_GPT1TC);
/*
* We run one shot per tick here! (This is necessary to reconfigure,
* the timer will tilt if you don't!)
*/
writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
u300_timer_base + U300_TIMER_APP_SGPT1M);
/* Enable timer interrupts */
writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
u300_timer_base + U300_TIMER_APP_GPT1IE);
/* Then enable the OS timer again */
writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
u300_timer_base + U300_TIMER_APP_EGPT1);
return 0;
}
static struct u300_clockevent_data u300_clockevent_data = {
/* Use general purpose timer 1 as clock event */
.cevd = {
.name = "GPT1",
/* Reasonably fast and accurate clock event */
.rating = 300,
.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = u300_set_next_event,
.set_mode = u300_set_mode,
},
};
/* Clock event timer interrupt handler */
static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &u300_clockevent_data.cevd;
/* ACK/Clear timer IRQ for the APP GPT1 Timer */
writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
u300_timer_base + U300_TIMER_APP_GPT1IA);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction u300_timer_irq = {
.name = "U300 Timer Tick",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = u300_timer_interrupt,
};
/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
* better resolution when scheduling the kernel. We accept that
* this wraps around for now, since it is just a relative time
* stamp. (Inspired by OMAP implementation.)
*/
static u64 notrace u300_read_sched_clock(void)
{
return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
}
static unsigned long u300_read_current_timer(void)
{
return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
}
static struct delay_timer u300_delay_timer;
/*
* This sets up the system timers, clock source and clock event.
*/
static void __init u300_timer_init_of(struct device_node *np)
{
unsigned int irq;
struct clk *clk;
unsigned long rate;
u300_timer_base = of_iomap(np, 0);
if (!u300_timer_base)
panic("could not ioremap system timer\n");
/* Get the IRQ for the GP1 timer */
irq = irq_of_parse_and_map(np, 2);
if (!irq)
panic("no IRQ for system timer\n");
pr_info("U300 GP1 timer @ base: %p, IRQ: %u\n", u300_timer_base, irq);
/* Clock the interrupt controller */
clk = of_clk_get(np, 0);
BUG_ON(IS_ERR(clk));
clk_prepare_enable(clk);
rate = clk_get_rate(clk);
u300_clockevent_data.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
sched_clock_register(u300_read_sched_clock, 32, rate);
u300_delay_timer.read_current_timer = &u300_read_current_timer;
u300_delay_timer.freq = rate;
register_current_timer_delay(&u300_delay_timer);
/*
* Disable the "OS" and "DD" timers - these are designed for Symbian!
* Example usage in cnh1601578 cpu subsystem pd_timer_app.c
*/
writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
u300_timer_base + U300_TIMER_APP_CRC);
writel(U300_TIMER_APP_ROST_TIMER_RESET,
u300_timer_base + U300_TIMER_APP_ROST);
writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
u300_timer_base + U300_TIMER_APP_DOST);
writel(U300_TIMER_APP_RDDT_TIMER_RESET,
u300_timer_base + U300_TIMER_APP_RDDT);
writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
u300_timer_base + U300_TIMER_APP_DDDT);
/* Reset the General Purpose timer 1. */
writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
u300_timer_base + U300_TIMER_APP_RGPT1);
/* Set up the IRQ handler */
setup_irq(irq, &u300_timer_irq);
/* Reset the General Purpose timer 2 */
writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
u300_timer_base + U300_TIMER_APP_RGPT2);
/* Set this timer to run around forever */
writel(0xFFFFFFFFU, u300_timer_base + U300_TIMER_APP_GPT2TC);
/* Set continuous mode so it wraps around */
writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
u300_timer_base + U300_TIMER_APP_SGPT2M);
/* Disable timer interrupts */
writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
u300_timer_base + U300_TIMER_APP_GPT2IE);
/* Then enable the GP2 timer to use as a free running us counter */
writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
u300_timer_base + U300_TIMER_APP_EGPT2);
/* Use general purpose timer 2 as clock source */
if (clocksource_mmio_init(u300_timer_base + U300_TIMER_APP_GPT2CC,
"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
pr_err("timer: failed to initialize U300 clock source\n");
/* Configure and register the clockevent */
clockevents_config_and_register(&u300_clockevent_data.cevd, rate,
1, 0xffffffff);
/*
* TODO: init and register the rest of the timers too, they can be
* used by hrtimers!
*/
}
CLOCKSOURCE_OF_DECLARE(u300_timer, "stericsson,u300-apptimer",
u300_timer_init_of);
Reference in New Issue View Git Blame Copy Permalink