mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 04:30:52 +07:00
6fde3894e2
Tegra's timer has 29 bits for the counter and for the "load" register which sets counter to a load-value. The counter's value is lower than the actual value by 1 because it starts to decrement after one tick, hence the maximum number of ticks that hardware can handle equals to 29 bits + 1. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
417 lines
10 KiB
C
417 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2010 Google, Inc.
|
|
*
|
|
* Author:
|
|
* Colin Cross <ccross@google.com>
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "tegra-timer: " fmt
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/cpumask.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/percpu.h>
|
|
#include <linux/sched_clock.h>
|
|
#include <linux/time.h>
|
|
|
|
#include "timer-of.h"
|
|
|
|
#define RTC_SECONDS 0x08
|
|
#define RTC_SHADOW_SECONDS 0x0c
|
|
#define RTC_MILLISECONDS 0x10
|
|
|
|
#define TIMERUS_CNTR_1US 0x10
|
|
#define TIMERUS_USEC_CFG 0x14
|
|
#define TIMERUS_CNTR_FREEZE 0x4c
|
|
|
|
#define TIMER_PTV 0x0
|
|
#define TIMER_PTV_EN BIT(31)
|
|
#define TIMER_PTV_PER BIT(30)
|
|
#define TIMER_PCR 0x4
|
|
#define TIMER_PCR_INTR_CLR BIT(30)
|
|
|
|
#define TIMER1_BASE 0x00
|
|
#define TIMER2_BASE 0x08
|
|
#define TIMER3_BASE 0x50
|
|
#define TIMER4_BASE 0x58
|
|
#define TIMER10_BASE 0x90
|
|
|
|
#define TIMER1_IRQ_IDX 0
|
|
#define TIMER10_IRQ_IDX 10
|
|
|
|
#define TIMER_1MHz 1000000
|
|
|
|
static u32 usec_config;
|
|
static void __iomem *timer_reg_base;
|
|
|
|
static int tegra_timer_set_next_event(unsigned long cycles,
|
|
struct clock_event_device *evt)
|
|
{
|
|
void __iomem *reg_base = timer_of_base(to_timer_of(evt));
|
|
|
|
/*
|
|
* Tegra's timer uses n+1 scheme for the counter, i.e. timer will
|
|
* fire after one tick if 0 is loaded.
|
|
*
|
|
* The minimum and maximum numbers of oneshot ticks are defined
|
|
* by clockevents_config_and_register(1, 0x1fffffff + 1) invocation
|
|
* below in the code. Hence the cycles (ticks) can't be outside of
|
|
* a range supportable by hardware.
|
|
*/
|
|
writel_relaxed(TIMER_PTV_EN | (cycles - 1), reg_base + TIMER_PTV);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_timer_shutdown(struct clock_event_device *evt)
|
|
{
|
|
void __iomem *reg_base = timer_of_base(to_timer_of(evt));
|
|
|
|
writel_relaxed(0, reg_base + TIMER_PTV);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_timer_set_periodic(struct clock_event_device *evt)
|
|
{
|
|
void __iomem *reg_base = timer_of_base(to_timer_of(evt));
|
|
unsigned long period = timer_of_period(to_timer_of(evt));
|
|
|
|
writel_relaxed(TIMER_PTV_EN | TIMER_PTV_PER | (period - 1),
|
|
reg_base + TIMER_PTV);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t tegra_timer_isr(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = dev_id;
|
|
void __iomem *reg_base = timer_of_base(to_timer_of(evt));
|
|
|
|
writel_relaxed(TIMER_PCR_INTR_CLR, reg_base + TIMER_PCR);
|
|
evt->event_handler(evt);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void tegra_timer_suspend(struct clock_event_device *evt)
|
|
{
|
|
void __iomem *reg_base = timer_of_base(to_timer_of(evt));
|
|
|
|
writel_relaxed(TIMER_PCR_INTR_CLR, reg_base + TIMER_PCR);
|
|
}
|
|
|
|
static void tegra_timer_resume(struct clock_event_device *evt)
|
|
{
|
|
writel_relaxed(usec_config, timer_reg_base + TIMERUS_USEC_CFG);
|
|
}
|
|
|
|
static DEFINE_PER_CPU(struct timer_of, tegra_to) = {
|
|
.flags = TIMER_OF_CLOCK | TIMER_OF_BASE,
|
|
|
|
.clkevt = {
|
|
.name = "tegra_timer",
|
|
.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
|
|
.set_next_event = tegra_timer_set_next_event,
|
|
.set_state_shutdown = tegra_timer_shutdown,
|
|
.set_state_periodic = tegra_timer_set_periodic,
|
|
.set_state_oneshot = tegra_timer_shutdown,
|
|
.tick_resume = tegra_timer_shutdown,
|
|
.suspend = tegra_timer_suspend,
|
|
.resume = tegra_timer_resume,
|
|
},
|
|
};
|
|
|
|
static int tegra_timer_setup(unsigned int cpu)
|
|
{
|
|
struct timer_of *to = per_cpu_ptr(&tegra_to, cpu);
|
|
|
|
writel_relaxed(0, timer_of_base(to) + TIMER_PTV);
|
|
writel_relaxed(TIMER_PCR_INTR_CLR, timer_of_base(to) + TIMER_PCR);
|
|
|
|
irq_force_affinity(to->clkevt.irq, cpumask_of(cpu));
|
|
enable_irq(to->clkevt.irq);
|
|
|
|
/*
|
|
* Tegra's timer uses n+1 scheme for the counter, i.e. timer will
|
|
* fire after one tick if 0 is loaded and thus minimum number of
|
|
* ticks is 1. In result both of the clocksource's tick limits are
|
|
* higher than a minimum and maximum that hardware register can
|
|
* take by 1, this is then taken into account by set_next_event
|
|
* callback.
|
|
*/
|
|
clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
|
|
1, /* min */
|
|
0x1fffffff + 1); /* max 29 bits + 1 */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_timer_stop(unsigned int cpu)
|
|
{
|
|
struct timer_of *to = per_cpu_ptr(&tegra_to, cpu);
|
|
|
|
to->clkevt.set_state_shutdown(&to->clkevt);
|
|
disable_irq_nosync(to->clkevt.irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u64 notrace tegra_read_sched_clock(void)
|
|
{
|
|
return readl_relaxed(timer_reg_base + TIMERUS_CNTR_1US);
|
|
}
|
|
|
|
#ifdef CONFIG_ARM
|
|
static unsigned long tegra_delay_timer_read_counter_long(void)
|
|
{
|
|
return readl_relaxed(timer_reg_base + TIMERUS_CNTR_1US);
|
|
}
|
|
|
|
static struct delay_timer tegra_delay_timer = {
|
|
.read_current_timer = tegra_delay_timer_read_counter_long,
|
|
.freq = TIMER_1MHz,
|
|
};
|
|
#endif
|
|
|
|
static struct timer_of suspend_rtc_to = {
|
|
.flags = TIMER_OF_BASE | TIMER_OF_CLOCK,
|
|
};
|
|
|
|
/*
|
|
* tegra_rtc_read - Reads the Tegra RTC registers
|
|
* Care must be taken that this function is not called while the
|
|
* tegra_rtc driver could be executing to avoid race conditions
|
|
* on the RTC shadow register
|
|
*/
|
|
static u64 tegra_rtc_read_ms(struct clocksource *cs)
|
|
{
|
|
void __iomem *reg_base = timer_of_base(&suspend_rtc_to);
|
|
|
|
u32 ms = readl_relaxed(reg_base + RTC_MILLISECONDS);
|
|
u32 s = readl_relaxed(reg_base + RTC_SHADOW_SECONDS);
|
|
|
|
return (u64)s * MSEC_PER_SEC + ms;
|
|
}
|
|
|
|
static struct clocksource suspend_rtc_clocksource = {
|
|
.name = "tegra_suspend_timer",
|
|
.rating = 200,
|
|
.read = tegra_rtc_read_ms,
|
|
.mask = CLOCKSOURCE_MASK(32),
|
|
.flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP,
|
|
};
|
|
|
|
static inline unsigned int tegra_base_for_cpu(int cpu, bool tegra20)
|
|
{
|
|
if (tegra20) {
|
|
switch (cpu) {
|
|
case 0:
|
|
return TIMER1_BASE;
|
|
case 1:
|
|
return TIMER2_BASE;
|
|
case 2:
|
|
return TIMER3_BASE;
|
|
default:
|
|
return TIMER4_BASE;
|
|
}
|
|
}
|
|
|
|
return TIMER10_BASE + cpu * 8;
|
|
}
|
|
|
|
static inline unsigned int tegra_irq_idx_for_cpu(int cpu, bool tegra20)
|
|
{
|
|
if (tegra20)
|
|
return TIMER1_IRQ_IDX + cpu;
|
|
|
|
return TIMER10_IRQ_IDX + cpu;
|
|
}
|
|
|
|
static inline unsigned long tegra_rate_for_timer(struct timer_of *to,
|
|
bool tegra20)
|
|
{
|
|
/*
|
|
* TIMER1-9 are fixed to 1MHz, TIMER10-13 are running off the
|
|
* parent clock.
|
|
*/
|
|
if (tegra20)
|
|
return TIMER_1MHz;
|
|
|
|
return timer_of_rate(to);
|
|
}
|
|
|
|
static int __init tegra_init_timer(struct device_node *np, bool tegra20,
|
|
int rating)
|
|
{
|
|
struct timer_of *to;
|
|
int cpu, ret;
|
|
|
|
to = this_cpu_ptr(&tegra_to);
|
|
ret = timer_of_init(np, to);
|
|
if (ret)
|
|
goto out;
|
|
|
|
timer_reg_base = timer_of_base(to);
|
|
|
|
/*
|
|
* Configure microsecond timers to have 1MHz clock
|
|
* Config register is 0xqqww, where qq is "dividend", ww is "divisor"
|
|
* Uses n+1 scheme
|
|
*/
|
|
switch (timer_of_rate(to)) {
|
|
case 12000000:
|
|
usec_config = 0x000b; /* (11+1)/(0+1) */
|
|
break;
|
|
case 12800000:
|
|
usec_config = 0x043f; /* (63+1)/(4+1) */
|
|
break;
|
|
case 13000000:
|
|
usec_config = 0x000c; /* (12+1)/(0+1) */
|
|
break;
|
|
case 16800000:
|
|
usec_config = 0x0453; /* (83+1)/(4+1) */
|
|
break;
|
|
case 19200000:
|
|
usec_config = 0x045f; /* (95+1)/(4+1) */
|
|
break;
|
|
case 26000000:
|
|
usec_config = 0x0019; /* (25+1)/(0+1) */
|
|
break;
|
|
case 38400000:
|
|
usec_config = 0x04bf; /* (191+1)/(4+1) */
|
|
break;
|
|
case 48000000:
|
|
usec_config = 0x002f; /* (47+1)/(0+1) */
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
writel_relaxed(usec_config, timer_reg_base + TIMERUS_USEC_CFG);
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
struct timer_of *cpu_to = per_cpu_ptr(&tegra_to, cpu);
|
|
unsigned long flags = IRQF_TIMER | IRQF_NOBALANCING;
|
|
unsigned long rate = tegra_rate_for_timer(to, tegra20);
|
|
unsigned int base = tegra_base_for_cpu(cpu, tegra20);
|
|
unsigned int idx = tegra_irq_idx_for_cpu(cpu, tegra20);
|
|
unsigned int irq = irq_of_parse_and_map(np, idx);
|
|
|
|
if (!irq) {
|
|
pr_err("failed to map irq for cpu%d\n", cpu);
|
|
ret = -EINVAL;
|
|
goto out_irq;
|
|
}
|
|
|
|
cpu_to->clkevt.irq = irq;
|
|
cpu_to->clkevt.rating = rating;
|
|
cpu_to->clkevt.cpumask = cpumask_of(cpu);
|
|
cpu_to->of_base.base = timer_reg_base + base;
|
|
cpu_to->of_clk.period = rate / HZ;
|
|
cpu_to->of_clk.rate = rate;
|
|
|
|
irq_set_status_flags(cpu_to->clkevt.irq, IRQ_NOAUTOEN);
|
|
|
|
ret = request_irq(cpu_to->clkevt.irq, tegra_timer_isr, flags,
|
|
cpu_to->clkevt.name, &cpu_to->clkevt);
|
|
if (ret) {
|
|
pr_err("failed to set up irq for cpu%d: %d\n",
|
|
cpu, ret);
|
|
irq_dispose_mapping(cpu_to->clkevt.irq);
|
|
cpu_to->clkevt.irq = 0;
|
|
goto out_irq;
|
|
}
|
|
}
|
|
|
|
sched_clock_register(tegra_read_sched_clock, 32, TIMER_1MHz);
|
|
|
|
ret = clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
|
|
"timer_us", TIMER_1MHz, 300, 32,
|
|
clocksource_mmio_readl_up);
|
|
if (ret)
|
|
pr_err("failed to register clocksource: %d\n", ret);
|
|
|
|
#ifdef CONFIG_ARM
|
|
register_current_timer_delay(&tegra_delay_timer);
|
|
#endif
|
|
|
|
ret = cpuhp_setup_state(CPUHP_AP_TEGRA_TIMER_STARTING,
|
|
"AP_TEGRA_TIMER_STARTING", tegra_timer_setup,
|
|
tegra_timer_stop);
|
|
if (ret)
|
|
pr_err("failed to set up cpu hp state: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
out_irq:
|
|
for_each_possible_cpu(cpu) {
|
|
struct timer_of *cpu_to;
|
|
|
|
cpu_to = per_cpu_ptr(&tegra_to, cpu);
|
|
if (cpu_to->clkevt.irq) {
|
|
free_irq(cpu_to->clkevt.irq, &cpu_to->clkevt);
|
|
irq_dispose_mapping(cpu_to->clkevt.irq);
|
|
}
|
|
}
|
|
|
|
to->of_base.base = timer_reg_base;
|
|
out:
|
|
timer_of_cleanup(to);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __init tegra210_init_timer(struct device_node *np)
|
|
{
|
|
/*
|
|
* Arch-timer can't survive across power cycle of CPU core and
|
|
* after CPUPORESET signal due to a system design shortcoming,
|
|
* hence tegra-timer is more preferable on Tegra210.
|
|
*/
|
|
return tegra_init_timer(np, false, 460);
|
|
}
|
|
TIMER_OF_DECLARE(tegra210_timer, "nvidia,tegra210-timer", tegra210_init_timer);
|
|
|
|
static int __init tegra20_init_timer(struct device_node *np)
|
|
{
|
|
int rating;
|
|
|
|
/*
|
|
* Tegra20 and Tegra30 have Cortex A9 CPU that has a TWD timer,
|
|
* that timer runs off the CPU clock and hence is subjected to
|
|
* a jitter caused by DVFS clock rate changes. Tegra-timer is
|
|
* more preferable for older Tegra's, while later SoC generations
|
|
* have arch-timer as a main per-CPU timer and it is not affected
|
|
* by DVFS changes.
|
|
*/
|
|
if (of_machine_is_compatible("nvidia,tegra20") ||
|
|
of_machine_is_compatible("nvidia,tegra30"))
|
|
rating = 460;
|
|
else
|
|
rating = 330;
|
|
|
|
return tegra_init_timer(np, true, rating);
|
|
}
|
|
TIMER_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
|
|
|
|
static int __init tegra20_init_rtc(struct device_node *np)
|
|
{
|
|
int ret;
|
|
|
|
ret = timer_of_init(np, &suspend_rtc_to);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return clocksource_register_hz(&suspend_rtc_clocksource, 1000);
|
|
}
|
|
TIMER_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
|