linux_dsm_epyc7002/drivers/cpufreq/ppc_cbe_cpufreq.c
Viresh Kumar c3bc3d67ff cpufreq: ppc_cbe: Use generic cpufreq routines
Most of the CPUFreq drivers do similar things in .exit() and .verify() routines
and .attr. So its better if we have generic routines for them which can be used
by cpufreq drivers then.

This patch uses these generic routines in the ppc_cbe driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-16 00:50:27 +02:00

196 lines
4.6 KiB
C

/*
* cpufreq driver for the cell processor
*
* (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
*
* Author: Christian Krafft <krafft@de.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/cpufreq.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/cell-regs.h>
#include "ppc_cbe_cpufreq.h"
static DEFINE_MUTEX(cbe_switch_mutex);
/* the CBE supports an 8 step frequency scaling */
static struct cpufreq_frequency_table cbe_freqs[] = {
{1, 0},
{2, 0},
{3, 0},
{4, 0},
{5, 0},
{6, 0},
{8, 0},
{10, 0},
{0, CPUFREQ_TABLE_END},
};
/*
* hardware specific functions
*/
static int set_pmode(unsigned int cpu, unsigned int slow_mode)
{
int rc;
if (cbe_cpufreq_has_pmi)
rc = cbe_cpufreq_set_pmode_pmi(cpu, slow_mode);
else
rc = cbe_cpufreq_set_pmode(cpu, slow_mode);
pr_debug("register contains slow mode %d\n", cbe_cpufreq_get_pmode(cpu));
return rc;
}
/*
* cpufreq functions
*/
static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
const u32 *max_freqp;
u32 max_freq;
int i, cur_pmode;
struct device_node *cpu;
cpu = of_get_cpu_node(policy->cpu, NULL);
if (!cpu)
return -ENODEV;
pr_debug("init cpufreq on CPU %d\n", policy->cpu);
/*
* Let's check we can actually get to the CELL regs
*/
if (!cbe_get_cpu_pmd_regs(policy->cpu) ||
!cbe_get_cpu_mic_tm_regs(policy->cpu)) {
pr_info("invalid CBE regs pointers for cpufreq\n");
return -EINVAL;
}
max_freqp = of_get_property(cpu, "clock-frequency", NULL);
of_node_put(cpu);
if (!max_freqp)
return -EINVAL;
/* we need the freq in kHz */
max_freq = *max_freqp / 1000;
pr_debug("max clock-frequency is at %u kHz\n", max_freq);
pr_debug("initializing frequency table\n");
/* initialize frequency table */
for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) {
cbe_freqs[i].frequency = max_freq / cbe_freqs[i].driver_data;
pr_debug("%d: %d\n", i, cbe_freqs[i].frequency);
}
/* if DEBUG is enabled set_pmode() measures the latency
* of a transition */
policy->cpuinfo.transition_latency = 25000;
cur_pmode = cbe_cpufreq_get_pmode(policy->cpu);
pr_debug("current pmode is at %d\n",cur_pmode);
policy->cur = cbe_freqs[cur_pmode].frequency;
#ifdef CONFIG_SMP
cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
#endif
/* this ensures that policy->cpuinfo_min
* and policy->cpuinfo_max are set correctly */
return cpufreq_table_validate_and_show(policy, cbe_freqs);
}
static int cbe_cpufreq_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
int rc;
struct cpufreq_freqs freqs;
unsigned int cbe_pmode_new;
cpufreq_frequency_table_target(policy,
cbe_freqs,
target_freq,
relation,
&cbe_pmode_new);
freqs.old = policy->cur;
freqs.new = cbe_freqs[cbe_pmode_new].frequency;
mutex_lock(&cbe_switch_mutex);
cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
pr_debug("setting frequency for cpu %d to %d kHz, " \
"1/%d of max frequency\n",
policy->cpu,
cbe_freqs[cbe_pmode_new].frequency,
cbe_freqs[cbe_pmode_new].driver_data);
rc = set_pmode(policy->cpu, cbe_pmode_new);
cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
mutex_unlock(&cbe_switch_mutex);
return rc;
}
static struct cpufreq_driver cbe_cpufreq_driver = {
.verify = cpufreq_generic_frequency_table_verify,
.target = cbe_cpufreq_target,
.init = cbe_cpufreq_cpu_init,
.exit = cpufreq_generic_exit,
.name = "cbe-cpufreq",
.flags = CPUFREQ_CONST_LOOPS,
};
/*
* module init and destoy
*/
static int __init cbe_cpufreq_init(void)
{
if (!machine_is(cell))
return -ENODEV;
return cpufreq_register_driver(&cbe_cpufreq_driver);
}
static void __exit cbe_cpufreq_exit(void)
{
cpufreq_unregister_driver(&cbe_cpufreq_driver);
}
module_init(cbe_cpufreq_init);
module_exit(cbe_cpufreq_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");