AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-21 10:00:03 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
450362d3fe
linux_dsm_epyc7002/drivers/gpu/drm/i915/intel_dsi.c
Jani Nikula fefc51e89c drm/i915/dsi: rename intel_dsi_pre_disable to intel_dsi_disable 
The hook names reflect more the phase in the mode set sequence the hooks
are called in than what they actually do in terms of the specific
encoder. Stick to that scheme, and rename intel_dsi_pre_disable to
intel_dsi_disable. Unify the comments around this while at it. No
functional changes.

v2: Add more sense in the enable/disable hook comments (Ville)

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488878659-10386-1-git-send-email-jani.nikula@intel.com
2017-03-07 15:18:13 +02:00

1868 lines
55 KiB
C
Raw Blame History

/*
* Copyright © 2013 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Author: Jani Nikula <jani.nikula@intel.com>
*/
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_edid.h>
#include <drm/i915_drm.h>
#include <drm/drm_mipi_dsi.h>
#include <linux/slab.h>
#include <linux/gpio/consumer.h>
#include "i915_drv.h"
#include "intel_drv.h"
#include "intel_dsi.h"
/* return pixels in terms of txbyteclkhs */
static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count,
u16 burst_mode_ratio)
{
return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio,
8 * 100), lane_count);
}
/* return pixels equvalent to txbyteclkhs */
static u16 pixels_from_txbyteclkhs(u16 clk_hs, int bpp, int lane_count,
u16 burst_mode_ratio)
{
return DIV_ROUND_UP((clk_hs * lane_count * 8 * 100),
(bpp * burst_mode_ratio));
}
enum mipi_dsi_pixel_format pixel_format_from_register_bits(u32 fmt)
{
/* It just so happens the VBT matches register contents. */
switch (fmt) {
case VID_MODE_FORMAT_RGB888:
return MIPI_DSI_FMT_RGB888;
case VID_MODE_FORMAT_RGB666:
return MIPI_DSI_FMT_RGB666;
case VID_MODE_FORMAT_RGB666_PACKED:
return MIPI_DSI_FMT_RGB666_PACKED;
case VID_MODE_FORMAT_RGB565:
return MIPI_DSI_FMT_RGB565;
default:
MISSING_CASE(fmt);
return MIPI_DSI_FMT_RGB666;
}
}
void wait_for_dsi_fifo_empty(struct intel_dsi *intel_dsi, enum port port)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
u32 mask;
mask = LP_CTRL_FIFO_EMPTY | HS_CTRL_FIFO_EMPTY |
LP_DATA_FIFO_EMPTY | HS_DATA_FIFO_EMPTY;
if (intel_wait_for_register(dev_priv,
MIPI_GEN_FIFO_STAT(port), mask, mask,
100))
DRM_ERROR("DPI FIFOs are not empty\n");
}
static void write_data(struct drm_i915_private *dev_priv,
i915_reg_t reg,
const u8 *data, u32 len)
{
u32 i, j;
for (i = 0; i < len; i += 4) {
u32 val = 0;
for (j = 0; j < min_t(u32, len - i, 4); j++)
val |= *data++ << 8 * j;
I915_WRITE(reg, val);
}
}
static void read_data(struct drm_i915_private *dev_priv,
i915_reg_t reg,
u8 *data, u32 len)
{
u32 i, j;
for (i = 0; i < len; i += 4) {
u32 val = I915_READ(reg);
for (j = 0; j < min_t(u32, len - i, 4); j++)
*data++ = val >> 8 * j;
}
}
static ssize_t intel_dsi_host_transfer(struct mipi_dsi_host *host,
const struct mipi_dsi_msg *msg)
{
struct intel_dsi_host *intel_dsi_host = to_intel_dsi_host(host);
struct drm_device *dev = intel_dsi_host->intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
enum port port = intel_dsi_host->port;
struct mipi_dsi_packet packet;
ssize_t ret;
const u8 *header, *data;
i915_reg_t data_reg, ctrl_reg;
u32 data_mask, ctrl_mask;
ret = mipi_dsi_create_packet(&packet, msg);
if (ret < 0)
return ret;
header = packet.header;
data = packet.payload;
if (msg->flags & MIPI_DSI_MSG_USE_LPM) {
data_reg = MIPI_LP_GEN_DATA(port);
data_mask = LP_DATA_FIFO_FULL;
ctrl_reg = MIPI_LP_GEN_CTRL(port);
ctrl_mask = LP_CTRL_FIFO_FULL;
} else {
data_reg = MIPI_HS_GEN_DATA(port);
data_mask = HS_DATA_FIFO_FULL;
ctrl_reg = MIPI_HS_GEN_CTRL(port);
ctrl_mask = HS_CTRL_FIFO_FULL;
}
/* note: this is never true for reads */
if (packet.payload_length) {
if (intel_wait_for_register(dev_priv,
MIPI_GEN_FIFO_STAT(port),
data_mask, 0,
50))
DRM_ERROR("Timeout waiting for HS/LP DATA FIFO !full\n");
write_data(dev_priv, data_reg, packet.payload,
packet.payload_length);
}
if (msg->rx_len) {
I915_WRITE(MIPI_INTR_STAT(port), GEN_READ_DATA_AVAIL);
}
if (intel_wait_for_register(dev_priv,
MIPI_GEN_FIFO_STAT(port),
ctrl_mask, 0,
50)) {
DRM_ERROR("Timeout waiting for HS/LP CTRL FIFO !full\n");
}
I915_WRITE(ctrl_reg, header[2] << 16 | header[1] << 8 | header[0]);
/* ->rx_len is set only for reads */
if (msg->rx_len) {
data_mask = GEN_READ_DATA_AVAIL;
if (intel_wait_for_register(dev_priv,
MIPI_INTR_STAT(port),
data_mask, data_mask,
50))
DRM_ERROR("Timeout waiting for read data.\n");
read_data(dev_priv, data_reg, msg->rx_buf, msg->rx_len);
}
/* XXX: fix for reads and writes */
return 4 + packet.payload_length;
}
static int intel_dsi_host_attach(struct mipi_dsi_host *host,
struct mipi_dsi_device *dsi)
{
return 0;
}
static int intel_dsi_host_detach(struct mipi_dsi_host *host,
struct mipi_dsi_device *dsi)
{
return 0;
}
static const struct mipi_dsi_host_ops intel_dsi_host_ops = {
.attach = intel_dsi_host_attach,
.detach = intel_dsi_host_detach,
.transfer = intel_dsi_host_transfer,
};
static struct intel_dsi_host *intel_dsi_host_init(struct intel_dsi *intel_dsi,
enum port port)
{
struct intel_dsi_host *host;
struct mipi_dsi_device *device;
host = kzalloc(sizeof(*host), GFP_KERNEL);
if (!host)
return NULL;
host->base.ops = &intel_dsi_host_ops;
host->intel_dsi = intel_dsi;
host->port = port;
/*
* We should call mipi_dsi_host_register(&host->base) here, but we don't
* have a host->dev, and we don't have OF stuff either. So just use the
* dsi framework as a library and hope for the best. Create the dsi
* devices by ourselves here too. Need to be careful though, because we
* don't initialize any of the driver model devices here.
*/
device = kzalloc(sizeof(*device), GFP_KERNEL);
if (!device) {
kfree(host);
return NULL;
}
device->host = &host->base;
host->device = device;
return host;
}
/*
* send a video mode command
*
* XXX: commands with data in MIPI_DPI_DATA?
*/
static int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs,
enum port port)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
u32 mask;
/* XXX: pipe, hs */
if (hs)
cmd &= ~DPI_LP_MODE;
else
cmd |= DPI_LP_MODE;
/* clear bit */
I915_WRITE(MIPI_INTR_STAT(port), SPL_PKT_SENT_INTERRUPT);
/* XXX: old code skips write if control unchanged */
if (cmd == I915_READ(MIPI_DPI_CONTROL(port)))
DRM_ERROR("Same special packet %02x twice in a row.\n", cmd);
I915_WRITE(MIPI_DPI_CONTROL(port), cmd);
mask = SPL_PKT_SENT_INTERRUPT;
if (intel_wait_for_register(dev_priv,
MIPI_INTR_STAT(port), mask, mask,
100))
DRM_ERROR("Video mode command 0x%08x send failed.\n", cmd);
return 0;
}
static void band_gap_reset(struct drm_i915_private *dev_priv)
{
mutex_lock(&dev_priv->sb_lock);
vlv_flisdsi_write(dev_priv, 0x08, 0x0001);
vlv_flisdsi_write(dev_priv, 0x0F, 0x0005);
vlv_flisdsi_write(dev_priv, 0x0F, 0x0025);
udelay(150);
vlv_flisdsi_write(dev_priv, 0x0F, 0x0000);
vlv_flisdsi_write(dev_priv, 0x08, 0x0000);
mutex_unlock(&dev_priv->sb_lock);
}
static inline bool is_vid_mode(struct intel_dsi *intel_dsi)
{
return intel_dsi->operation_mode == INTEL_DSI_VIDEO_MODE;
}
static inline bool is_cmd_mode(struct intel_dsi *intel_dsi)
{
return intel_dsi->operation_mode == INTEL_DSI_COMMAND_MODE;
}
static bool intel_dsi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
base);
struct intel_connector *intel_connector = intel_dsi->attached_connector;
struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
int ret;
DRM_DEBUG_KMS("\n");
if (fixed_mode) {
intel_fixed_panel_mode(fixed_mode, adjusted_mode);
if (HAS_GMCH_DISPLAY(dev_priv))
intel_gmch_panel_fitting(crtc, pipe_config,
intel_connector->panel.fitting_mode);
else
intel_pch_panel_fitting(crtc, pipe_config,
intel_connector->panel.fitting_mode);
}
/* DSI uses short packets for sync events, so clear mode flags for DSI */
adjusted_mode->flags = 0;
if (IS_GEN9_LP(dev_priv)) {
/* Dual link goes to DSI transcoder A. */
if (intel_dsi->ports == BIT(PORT_C))
pipe_config->cpu_transcoder = TRANSCODER_DSI_C;
else
pipe_config->cpu_transcoder = TRANSCODER_DSI_A;
}
ret = intel_compute_dsi_pll(encoder, pipe_config);
if (ret)
return false;
pipe_config->clock_set = true;
return true;
}
static void glk_dsi_device_ready(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
u32 tmp, val;
/* Set the MIPI mode
* If MIPI_Mode is off, then writing to LP_Wake bit is not reflecting.
* Power ON MIPI IO first and then write into IO reset and LP wake bits
*/
for_each_dsi_port(port, intel_dsi->ports) {
tmp = I915_READ(MIPI_CTRL(port));
I915_WRITE(MIPI_CTRL(port), tmp | GLK_MIPIIO_ENABLE);
}
/* Put the IO into reset */
tmp = I915_READ(MIPI_CTRL(PORT_A));
tmp &= ~GLK_MIPIIO_RESET_RELEASED;
I915_WRITE(MIPI_CTRL(PORT_A), tmp);
/* Program LP Wake */
for_each_dsi_port(port, intel_dsi->ports) {
tmp = I915_READ(MIPI_CTRL(port));
tmp |= GLK_LP_WAKE;
I915_WRITE(MIPI_CTRL(port), tmp);
}
/* Wait for Pwr ACK */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_wait_for_register(dev_priv,
MIPI_CTRL(port), GLK_MIPIIO_PORT_POWERED,
GLK_MIPIIO_PORT_POWERED, 20))
DRM_ERROR("MIPIO port is powergated\n");
}
/* Wait for MIPI PHY status bit to set */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_wait_for_register(dev_priv,
MIPI_CTRL(port), GLK_PHY_STATUS_PORT_READY,
GLK_PHY_STATUS_PORT_READY, 20))
DRM_ERROR("PHY is not ON\n");
}
/* Get IO out of reset */
tmp = I915_READ(MIPI_CTRL(PORT_A));
I915_WRITE(MIPI_CTRL(PORT_A), tmp | GLK_MIPIIO_RESET_RELEASED);
/* Get IO out of Low power state*/
for_each_dsi_port(port, intel_dsi->ports) {
if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY)) {
val = I915_READ(MIPI_DEVICE_READY(port));
val &= ~ULPS_STATE_MASK;
val |= DEVICE_READY;
I915_WRITE(MIPI_DEVICE_READY(port), val);
usleep_range(10, 15);
}
/* Enter ULPS */
val = I915_READ(MIPI_DEVICE_READY(port));
val &= ~ULPS_STATE_MASK;
val |= (ULPS_STATE_ENTER | DEVICE_READY);
I915_WRITE(MIPI_DEVICE_READY(port), val);
/* Wait for ULPS Not active */
if (intel_wait_for_register(dev_priv,
MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE,
GLK_ULPS_NOT_ACTIVE, 20))
DRM_ERROR("ULPS is still active\n");
/* Exit ULPS */
val = I915_READ(MIPI_DEVICE_READY(port));
val &= ~ULPS_STATE_MASK;
val |= (ULPS_STATE_EXIT | DEVICE_READY);
I915_WRITE(MIPI_DEVICE_READY(port), val);
/* Enter Normal Mode */
val = I915_READ(MIPI_DEVICE_READY(port));
val &= ~ULPS_STATE_MASK;
val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY);
I915_WRITE(MIPI_DEVICE_READY(port), val);
tmp = I915_READ(MIPI_CTRL(port));
tmp &= ~GLK_LP_WAKE;
I915_WRITE(MIPI_CTRL(port), tmp);
}
/* Wait for Stop state */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_wait_for_register(dev_priv,
MIPI_CTRL(port), GLK_DATA_LANE_STOP_STATE,
GLK_DATA_LANE_STOP_STATE, 20))
DRM_ERROR("Date lane not in STOP state\n");
}
/* Wait for AFE LATCH */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_wait_for_register(dev_priv,
BXT_MIPI_PORT_CTRL(port), AFE_LATCHOUT,
AFE_LATCHOUT, 20))
DRM_ERROR("D-PHY not entering LP-11 state\n");
}
}
static void bxt_dsi_device_ready(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
u32 val;
DRM_DEBUG_KMS("\n");
/* Enable MIPI PHY transparent latch */
for_each_dsi_port(port, intel_dsi->ports) {
val = I915_READ(BXT_MIPI_PORT_CTRL(port));
I915_WRITE(BXT_MIPI_PORT_CTRL(port), val | LP_OUTPUT_HOLD);
usleep_range(2000, 2500);
}
/* Clear ULPS and set device ready */
for_each_dsi_port(port, intel_dsi->ports) {
val = I915_READ(MIPI_DEVICE_READY(port));
val &= ~ULPS_STATE_MASK;
I915_WRITE(MIPI_DEVICE_READY(port), val);
usleep_range(2000, 2500);
val |= DEVICE_READY;
I915_WRITE(MIPI_DEVICE_READY(port), val);
}
}
static void vlv_dsi_device_ready(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
u32 val;
DRM_DEBUG_KMS("\n");
mutex_lock(&dev_priv->sb_lock);
/* program rcomp for compliance, reduce from 50 ohms to 45 ohms
* needed everytime after power gate */
vlv_flisdsi_write(dev_priv, 0x04, 0x0004);
mutex_unlock(&dev_priv->sb_lock);
/* bandgap reset is needed after everytime we do power gate */
band_gap_reset(dev_priv);
for_each_dsi_port(port, intel_dsi->ports) {
I915_WRITE(MIPI_DEVICE_READY(port), ULPS_STATE_ENTER);
usleep_range(2500, 3000);
/* Enable MIPI PHY transparent latch
* Common bit for both MIPI Port A & MIPI Port C
* No similar bit in MIPI Port C reg
*/
val = I915_READ(MIPI_PORT_CTRL(PORT_A));
I915_WRITE(MIPI_PORT_CTRL(PORT_A), val | LP_OUTPUT_HOLD);
usleep_range(1000, 1500);
I915_WRITE(MIPI_DEVICE_READY(port), ULPS_STATE_EXIT);
usleep_range(2500, 3000);
I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY);
usleep_range(2500, 3000);
}
}
static void intel_dsi_device_ready(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
vlv_dsi_device_ready(encoder);
else if (IS_BROXTON(dev_priv))
bxt_dsi_device_ready(encoder);
else if (IS_GEMINILAKE(dev_priv))
glk_dsi_device_ready(encoder);
}
static void glk_dsi_enter_low_power_mode(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
u32 val;
/* Enter ULPS */
for_each_dsi_port(port, intel_dsi->ports) {
val = I915_READ(MIPI_DEVICE_READY(port));
val &= ~ULPS_STATE_MASK;
val |= (ULPS_STATE_ENTER | DEVICE_READY);
I915_WRITE(MIPI_DEVICE_READY(port), val);
}
/* Wait for MIPI PHY status bit to unset */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_wait_for_register(dev_priv,
MIPI_CTRL(port),
GLK_PHY_STATUS_PORT_READY, 0, 20))
DRM_ERROR("PHY is not turning OFF\n");
}
/* Wait for Pwr ACK bit to unset */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_wait_for_register(dev_priv,
MIPI_CTRL(port),
GLK_MIPIIO_PORT_POWERED, 0, 20))
DRM_ERROR("MIPI IO Port is not powergated\n");
}
}
static void glk_dsi_disable_mipi_io(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
u32 tmp;
/* Put the IO into reset */
tmp = I915_READ(MIPI_CTRL(PORT_A));
tmp &= ~GLK_MIPIIO_RESET_RELEASED;
I915_WRITE(MIPI_CTRL(PORT_A), tmp);
/* Wait for MIPI PHY status bit to unset */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_wait_for_register(dev_priv,
MIPI_CTRL(port),
GLK_PHY_STATUS_PORT_READY, 0, 20))
DRM_ERROR("PHY is not turning OFF\n");
}
/* Clear MIPI mode */
for_each_dsi_port(port, intel_dsi->ports) {
tmp = I915_READ(MIPI_CTRL(port));
tmp &= ~GLK_MIPIIO_ENABLE;
I915_WRITE(MIPI_CTRL(port), tmp);
}
}
static void glk_dsi_clear_device_ready(struct intel_encoder *encoder)
{
glk_dsi_enter_low_power_mode(encoder);
glk_dsi_disable_mipi_io(encoder);
}
static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
DRM_DEBUG_KMS("\n");
for_each_dsi_port(port, intel_dsi->ports) {
/* Common bit for both MIPI Port A & MIPI Port C on VLV/CHV */
i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ?
BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(PORT_A);
u32 val;
I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY |
ULPS_STATE_ENTER);
usleep_range(2000, 2500);
I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY |
ULPS_STATE_EXIT);
usleep_range(2000, 2500);
I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY |
ULPS_STATE_ENTER);
usleep_range(2000, 2500);
/*
* On VLV/CHV, wait till Clock lanes are in LP-00 state for MIPI
* Port A only. MIPI Port C has no similar bit for checking.
*/
if ((IS_GEN9_LP(dev_priv) || port == PORT_A) &&
intel_wait_for_register(dev_priv,
port_ctrl, AFE_LATCHOUT, 0,
30))
DRM_ERROR("DSI LP not going Low\n");
/* Disable MIPI PHY transparent latch */
val = I915_READ(port_ctrl);
I915_WRITE(port_ctrl, val & ~LP_OUTPUT_HOLD);
usleep_range(1000, 1500);
I915_WRITE(MIPI_DEVICE_READY(port), 0x00);
usleep_range(2000, 2500);
}
}
static void intel_dsi_port_enable(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
u32 temp;
if (IS_GEN9_LP(dev_priv)) {
for_each_dsi_port(port, intel_dsi->ports) {
temp = I915_READ(MIPI_CTRL(port));
temp &= ~BXT_PIXEL_OVERLAP_CNT_MASK |
intel_dsi->pixel_overlap <<
BXT_PIXEL_OVERLAP_CNT_SHIFT;
I915_WRITE(MIPI_CTRL(port), temp);
}
} else {
temp = I915_READ(VLV_CHICKEN_3);
temp &= ~PIXEL_OVERLAP_CNT_MASK |
intel_dsi->pixel_overlap <<
PIXEL_OVERLAP_CNT_SHIFT;
I915_WRITE(VLV_CHICKEN_3, temp);
}
}
for_each_dsi_port(port, intel_dsi->ports) {
i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ?
BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
u32 temp;
temp = I915_READ(port_ctrl);
temp &= ~LANE_CONFIGURATION_MASK;
temp &= ~DUAL_LINK_MODE_MASK;
if (intel_dsi->ports == (BIT(PORT_A) | BIT(PORT_C))) {
temp |= (intel_dsi->dual_link - 1)
<< DUAL_LINK_MODE_SHIFT;
if (IS_BROXTON(dev_priv))
temp |= LANE_CONFIGURATION_DUAL_LINK_A;
else
temp |= intel_crtc->pipe ?
LANE_CONFIGURATION_DUAL_LINK_B :
LANE_CONFIGURATION_DUAL_LINK_A;
}
/* assert ip_tg_enable signal */
I915_WRITE(port_ctrl, temp | DPI_ENABLE);
POSTING_READ(port_ctrl);
}
}
static void intel_dsi_port_disable(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
for_each_dsi_port(port, intel_dsi->ports) {
i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ?
BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
u32 temp;
/* de-assert ip_tg_enable signal */
temp = I915_READ(port_ctrl);
I915_WRITE(port_ctrl, temp & ~DPI_ENABLE);
POSTING_READ(port_ctrl);
}
}
static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
struct intel_crtc_state *pipe_config);
static void intel_dsi_unprepare(struct intel_encoder *encoder);
static void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec)
{
struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
/* For v3 VBTs in vid-mode the delays are part of the VBT sequences */
if (is_vid_mode(intel_dsi) && dev_priv->vbt.dsi.seq_version >= 3)
return;
msleep(msec);
}
/*
* Panel enable/disable sequences from the VBT spec.
*
* Note the spec has AssertReset / DeassertReset swapped from their
* usual naming. We use the normal names to avoid confusion (so below
* they are swapped compared to the spec).
*
* Steps starting with MIPI refer to VBT sequences, note that for v2
* VBTs several steps which have a VBT in v2 are expected to be handled
* directly by the driver, by directly driving gpios for example.
*
* v2 video mode seq v3 video mode seq command mode seq
* - power on - MIPIPanelPowerOn - power on
* - wait t1+t2 - wait t1+t2
* - MIPIDeassertResetPin - MIPIDeassertResetPin - MIPIDeassertResetPin
* - io lines to lp-11 - io lines to lp-11 - io lines to lp-11
* - MIPISendInitialDcsCmds - MIPISendInitialDcsCmds - MIPISendInitialDcsCmds
* - MIPITearOn
* - MIPIDisplayOn
* - turn on DPI - turn on DPI - set pipe to dsr mode
* - MIPIDisplayOn - MIPIDisplayOn
* - wait t5 - wait t5
* - backlight on - MIPIBacklightOn - backlight on
* ... ... ... issue mem cmds ...
* - backlight off - MIPIBacklightOff - backlight off
* - wait t6 - wait t6
* - MIPIDisplayOff
* - turn off DPI - turn off DPI - disable pipe dsr mode
* - MIPITearOff
* - MIPIDisplayOff - MIPIDisplayOff
* - io lines to lp-00 - io lines to lp-00 - io lines to lp-00
* - MIPIAssertResetPin - MIPIAssertResetPin - MIPIAssertResetPin
* - wait t3 - wait t3
* - power off - MIPIPanelPowerOff - power off
* - wait t4 - wait t4
*/
static void intel_dsi_pre_enable(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
u32 val;
DRM_DEBUG_KMS("\n");
/*
* The BIOS may leave the PLL in a wonky state where it doesn't
* lock. It needs to be fully powered down to fix it.
*/
intel_disable_dsi_pll(encoder);
intel_enable_dsi_pll(encoder, pipe_config);
if (IS_BROXTON(dev_priv)) {
/* Add MIPI IO reset programming for modeset */
val = I915_READ(BXT_P_CR_GT_DISP_PWRON);
I915_WRITE(BXT_P_CR_GT_DISP_PWRON,
val | MIPIO_RST_CTRL);
/* Power up DSI regulator */
I915_WRITE(BXT_P_DSI_REGULATOR_CFG, STAP_SELECT);
I915_WRITE(BXT_P_DSI_REGULATOR_TX_CTRL, 0);
}
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
u32 val;
/* Disable DPOunit clock gating, can stall pipe */
val = I915_READ(DSPCLK_GATE_D);
val |= DPOUNIT_CLOCK_GATE_DISABLE;
I915_WRITE(DSPCLK_GATE_D, val);
}
intel_dsi_prepare(encoder, pipe_config);
/* Power on, try both CRC pmic gpio and VBT */
if (intel_dsi->gpio_panel)
gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_ON);
intel_dsi_msleep(intel_dsi, intel_dsi->panel_on_delay);
/* Deassert reset */
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DEASSERT_RESET);
/* Put device in ready state (LP-11) */
intel_dsi_device_ready(encoder);
/* Send initialization commands in LP mode */
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_INIT_OTP);
/* Enable port in pre-enable phase itself because as per hw team
* recommendation, port should be enabled befor plane & pipe */
if (is_cmd_mode(intel_dsi)) {
for_each_dsi_port(port, intel_dsi->ports)
I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(port), 8 * 4);
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_TEAR_ON);
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON);
} else {
msleep(20); /* XXX */
for_each_dsi_port(port, intel_dsi->ports)
dpi_send_cmd(intel_dsi, TURN_ON, false, port);
intel_dsi_msleep(intel_dsi, 100);
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON);
intel_dsi_port_enable(encoder);
}
intel_panel_enable_backlight(intel_dsi->attached_connector);
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_ON);
}
/*
* DSI port enable has to be done before pipe and plane enable, so we do it in
* the pre_enable hook.
*/
static void intel_dsi_enable_nop(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
{
DRM_DEBUG_KMS("\n");
}
/*
* DSI port disable has to be done after pipe and plane disable, so we do it in
* the post_disable hook.
*/
static void intel_dsi_disable(struct intel_encoder *encoder,
struct intel_crtc_state *old_crtc_state,
struct drm_connector_state *old_conn_state)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
DRM_DEBUG_KMS("\n");
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_OFF);
intel_panel_disable_backlight(intel_dsi->attached_connector);
/*
* Disable Device ready before the port shutdown in order
* to avoid split screen
*/
if (IS_BROXTON(dev_priv)) {
for_each_dsi_port(port, intel_dsi->ports)
I915_WRITE(MIPI_DEVICE_READY(port), 0);
}
/*
* According to the spec we should send SHUTDOWN before
* MIPI_SEQ_DISPLAY_OFF only for v3+ VBTs, but field testing
* has shown that the v3 sequence works for v2 VBTs too
*/
if (is_vid_mode(intel_dsi)) {
/* Send Shutdown command to the panel in LP mode */
for_each_dsi_port(port, intel_dsi->ports)
dpi_send_cmd(intel_dsi, SHUTDOWN, false, port);
msleep(10);
}
}
static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv) ||
IS_BROXTON(dev_priv))
vlv_dsi_clear_device_ready(encoder);
else if (IS_GEMINILAKE(dev_priv))
glk_dsi_clear_device_ready(encoder);
}
static void intel_dsi_post_disable(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
u32 val;
DRM_DEBUG_KMS("\n");
if (is_vid_mode(intel_dsi)) {
for_each_dsi_port(port, intel_dsi->ports)
wait_for_dsi_fifo_empty(intel_dsi, port);
intel_dsi_port_disable(encoder);
usleep_range(2000, 5000);
}
intel_dsi_unprepare(encoder);
/*
* if disable packets are sent before sending shutdown packet then in
* some next enable sequence send turn on packet error is observed
*/
if (is_cmd_mode(intel_dsi))
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_TEAR_OFF);
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_OFF);
/* Transition to LP-00 */
intel_dsi_clear_device_ready(encoder);
if (IS_BROXTON(dev_priv)) {
/* Power down DSI regulator to save power */
I915_WRITE(BXT_P_DSI_REGULATOR_CFG, STAP_SELECT);
I915_WRITE(BXT_P_DSI_REGULATOR_TX_CTRL, HS_IO_CTRL_SELECT);
/* Add MIPI IO reset programming for modeset */
val = I915_READ(BXT_P_CR_GT_DISP_PWRON);
I915_WRITE(BXT_P_CR_GT_DISP_PWRON,
val & ~MIPIO_RST_CTRL);
}
intel_disable_dsi_pll(encoder);
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
u32 val;
val = I915_READ(DSPCLK_GATE_D);
val &= ~DPOUNIT_CLOCK_GATE_DISABLE;
I915_WRITE(DSPCLK_GATE_D, val);
}
/* Assert reset */
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_ASSERT_RESET);
/* Power off, try both CRC pmic gpio and VBT */
intel_dsi_msleep(intel_dsi, intel_dsi->panel_off_delay);
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_OFF);
if (intel_dsi->gpio_panel)
gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0);
/*
* FIXME As we do with eDP, just make a note of the time here
* and perform the wait before the next panel power on.
*/
intel_dsi_msleep(intel_dsi, intel_dsi->panel_pwr_cycle_delay);
}
static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
enum pipe *pipe)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
bool active = false;
DRM_DEBUG_KMS("\n");
if (!intel_display_power_get_if_enabled(dev_priv,
encoder->power_domain))
return false;
/*
* On Broxton the PLL needs to be enabled with a valid divider
* configuration, otherwise accessing DSI registers will hang the
* machine. See BSpec North Display Engine registers/MIPI[BXT].
*/
if (IS_GEN9_LP(dev_priv) && !intel_dsi_pll_is_enabled(dev_priv))
goto out_put_power;
/* XXX: this only works for one DSI output */
for_each_dsi_port(port, intel_dsi->ports) {
i915_reg_t ctrl_reg = IS_GEN9_LP(dev_priv) ?
BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
bool enabled = I915_READ(ctrl_reg) & DPI_ENABLE;
/*
* Due to some hardware limitations on VLV/CHV, the DPI enable
* bit in port C control register does not get set. As a
* workaround, check pipe B conf instead.
*/
if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
port == PORT_C)
enabled = I915_READ(PIPECONF(PIPE_B)) & PIPECONF_ENABLE;
/* Try command mode if video mode not enabled */
if (!enabled) {
u32 tmp = I915_READ(MIPI_DSI_FUNC_PRG(port));
enabled = tmp & CMD_MODE_DATA_WIDTH_MASK;
}
if (!enabled)
continue;
if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY))
continue;
if (IS_GEN9_LP(dev_priv)) {
u32 tmp = I915_READ(MIPI_CTRL(port));
tmp &= BXT_PIPE_SELECT_MASK;
tmp >>= BXT_PIPE_SELECT_SHIFT;
if (WARN_ON(tmp > PIPE_C))
continue;
*pipe = tmp;
} else {
*pipe = port == PORT_A ? PIPE_A : PIPE_B;
}
active = true;
break;
}
out_put_power:
intel_display_power_put(dev_priv, encoder->power_domain);
return active;
}
static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_display_mode *adjusted_mode =
&pipe_config->base.adjusted_mode;
struct drm_display_mode *adjusted_mode_sw;
struct intel_crtc *intel_crtc;
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
unsigned int lane_count = intel_dsi->lane_count;
unsigned int bpp, fmt;
enum port port;
u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
u16 hfp_sw, hsync_sw, hbp_sw;
u16 crtc_htotal_sw, crtc_hsync_start_sw, crtc_hsync_end_sw,
crtc_hblank_start_sw, crtc_hblank_end_sw;
/* FIXME: hw readout should not depend on SW state */
intel_crtc = to_intel_crtc(encoder->base.crtc);
adjusted_mode_sw = &intel_crtc->config->base.adjusted_mode;
/*
* Atleast one port is active as encoder->get_config called only if
* encoder->get_hw_state() returns true.
*/
for_each_dsi_port(port, intel_dsi->ports) {
if (I915_READ(BXT_MIPI_PORT_CTRL(port)) & DPI_ENABLE)
break;
}
fmt = I915_READ(MIPI_DSI_FUNC_PRG(port)) & VID_MODE_FORMAT_MASK;
pipe_config->pipe_bpp =
mipi_dsi_pixel_format_to_bpp(
pixel_format_from_register_bits(fmt));
bpp = pipe_config->pipe_bpp;
/* In terms of pixels */
adjusted_mode->crtc_hdisplay =
I915_READ(BXT_MIPI_TRANS_HACTIVE(port));
adjusted_mode->crtc_vdisplay =
I915_READ(BXT_MIPI_TRANS_VACTIVE(port));
adjusted_mode->crtc_vtotal =
I915_READ(BXT_MIPI_TRANS_VTOTAL(port));
hactive = adjusted_mode->crtc_hdisplay;
hfp = I915_READ(MIPI_HFP_COUNT(port));
/*
* Meaningful for video mode non-burst sync pulse mode only,
* can be zero for non-burst sync events and burst modes
*/
hsync = I915_READ(MIPI_HSYNC_PADDING_COUNT(port));
hbp = I915_READ(MIPI_HBP_COUNT(port));
/* harizontal values are in terms of high speed byte clock */
hfp = pixels_from_txbyteclkhs(hfp, bpp, lane_count,
intel_dsi->burst_mode_ratio);
hsync = pixels_from_txbyteclkhs(hsync, bpp, lane_count,
intel_dsi->burst_mode_ratio);
hbp = pixels_from_txbyteclkhs(hbp, bpp, lane_count,
intel_dsi->burst_mode_ratio);
if (intel_dsi->dual_link) {
hfp *= 2;
hsync *= 2;
hbp *= 2;
}
/* vertical values are in terms of lines */
vfp = I915_READ(MIPI_VFP_COUNT(port));
vsync = I915_READ(MIPI_VSYNC_PADDING_COUNT(port));
vbp = I915_READ(MIPI_VBP_COUNT(port));
adjusted_mode->crtc_htotal = hactive + hfp + hsync + hbp;
adjusted_mode->crtc_hsync_start = hfp + adjusted_mode->crtc_hdisplay;
adjusted_mode->crtc_hsync_end = hsync + adjusted_mode->crtc_hsync_start;
adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hdisplay;
adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_htotal;
adjusted_mode->crtc_vsync_start = vfp + adjusted_mode->crtc_vdisplay;
adjusted_mode->crtc_vsync_end = vsync + adjusted_mode->crtc_vsync_start;
adjusted_mode->crtc_vblank_start = adjusted_mode->crtc_vdisplay;
adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal;
/*
* In BXT DSI there is no regs programmed with few horizontal timings
* in Pixels but txbyteclkhs.. So retrieval process adds some
* ROUND_UP ERRORS in the process of PIXELS<==>txbyteclkhs.
* Actually here for the given adjusted_mode, we are calculating the
* value programmed to the port and then back to the horizontal timing
* param in pixels. This is the expected value, including roundup errors
* And if that is same as retrieved value from port, then
* (HW state) adjusted_mode's horizontal timings are corrected to
* match with SW state to nullify the errors.
*/
/* Calculating the value programmed to the Port register */
hfp_sw = adjusted_mode_sw->crtc_hsync_start -
adjusted_mode_sw->crtc_hdisplay;
hsync_sw = adjusted_mode_sw->crtc_hsync_end -
adjusted_mode_sw->crtc_hsync_start;
hbp_sw = adjusted_mode_sw->crtc_htotal -
adjusted_mode_sw->crtc_hsync_end;
if (intel_dsi->dual_link) {
hfp_sw /= 2;
hsync_sw /= 2;
hbp_sw /= 2;
}
hfp_sw = txbyteclkhs(hfp_sw, bpp, lane_count,
intel_dsi->burst_mode_ratio);
hsync_sw = txbyteclkhs(hsync_sw, bpp, lane_count,
intel_dsi->burst_mode_ratio);
hbp_sw = txbyteclkhs(hbp_sw, bpp, lane_count,
intel_dsi->burst_mode_ratio);
/* Reverse calculating the adjusted mode parameters from port reg vals*/
hfp_sw = pixels_from_txbyteclkhs(hfp_sw, bpp, lane_count,
intel_dsi->burst_mode_ratio);
hsync_sw = pixels_from_txbyteclkhs(hsync_sw, bpp, lane_count,
intel_dsi->burst_mode_ratio);
hbp_sw = pixels_from_txbyteclkhs(hbp_sw, bpp, lane_count,
intel_dsi->burst_mode_ratio);
if (intel_dsi->dual_link) {
hfp_sw *= 2;
hsync_sw *= 2;
hbp_sw *= 2;
}
crtc_htotal_sw = adjusted_mode_sw->crtc_hdisplay + hfp_sw +
hsync_sw + hbp_sw;
crtc_hsync_start_sw = hfp_sw + adjusted_mode_sw->crtc_hdisplay;
crtc_hsync_end_sw = hsync_sw + crtc_hsync_start_sw;
crtc_hblank_start_sw = adjusted_mode_sw->crtc_hdisplay;
crtc_hblank_end_sw = crtc_htotal_sw;
if (adjusted_mode->crtc_htotal == crtc_htotal_sw)
adjusted_mode->crtc_htotal = adjusted_mode_sw->crtc_htotal;
if (adjusted_mode->crtc_hsync_start == crtc_hsync_start_sw)
adjusted_mode->crtc_hsync_start =
adjusted_mode_sw->crtc_hsync_start;
if (adjusted_mode->crtc_hsync_end == crtc_hsync_end_sw)
adjusted_mode->crtc_hsync_end =
adjusted_mode_sw->crtc_hsync_end;
if (adjusted_mode->crtc_hblank_start == crtc_hblank_start_sw)
adjusted_mode->crtc_hblank_start =
adjusted_mode_sw->crtc_hblank_start;
if (adjusted_mode->crtc_hblank_end == crtc_hblank_end_sw)
adjusted_mode->crtc_hblank_end =
adjusted_mode_sw->crtc_hblank_end;
}
static void intel_dsi_get_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
u32 pclk;
DRM_DEBUG_KMS("\n");
if (IS_GEN9_LP(dev_priv))
bxt_dsi_get_pipe_config(encoder, pipe_config);
pclk = intel_dsi_get_pclk(encoder, pipe_config->pipe_bpp,
pipe_config);
if (!pclk)
return;
pipe_config->base.adjusted_mode.crtc_clock = pclk;
pipe_config->port_clock = pclk;
}
static enum drm_mode_status
intel_dsi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
DRM_DEBUG_KMS("\n");
if (mode->flags & DRM_MODE_FLAG_DBLSCAN) {
DRM_DEBUG_KMS("MODE_NO_DBLESCAN\n");
return MODE_NO_DBLESCAN;
}
if (fixed_mode) {
if (mode->hdisplay > fixed_mode->hdisplay)
return MODE_PANEL;
if (mode->vdisplay > fixed_mode->vdisplay)
return MODE_PANEL;
if (fixed_mode->clock > max_dotclk)
return MODE_CLOCK_HIGH;
}
return MODE_OK;
}
/* return txclkesc cycles in terms of divider and duration in us */
static u16 txclkesc(u32 divider, unsigned int us)
{
switch (divider) {
case ESCAPE_CLOCK_DIVIDER_1:
default:
return 20 * us;
case ESCAPE_CLOCK_DIVIDER_2:
return 10 * us;
case ESCAPE_CLOCK_DIVIDER_4:
return 5 * us;
}
}
static void set_dsi_timings(struct drm_encoder *encoder,
const struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
enum port port;
unsigned int bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
unsigned int lane_count = intel_dsi->lane_count;
u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
hactive = adjusted_mode->crtc_hdisplay;
hfp = adjusted_mode->crtc_hsync_start - adjusted_mode->crtc_hdisplay;
hsync = adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start;
hbp = adjusted_mode->crtc_htotal - adjusted_mode->crtc_hsync_end;
if (intel_dsi->dual_link) {
hactive /= 2;
if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
hactive += intel_dsi->pixel_overlap;
hfp /= 2;
hsync /= 2;
hbp /= 2;
}
vfp = adjusted_mode->crtc_vsync_start - adjusted_mode->crtc_vdisplay;
vsync = adjusted_mode->crtc_vsync_end - adjusted_mode->crtc_vsync_start;
vbp = adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vsync_end;
/* horizontal values are in terms of high speed byte clock */
hactive = txbyteclkhs(hactive, bpp, lane_count,
intel_dsi->burst_mode_ratio);
hfp = txbyteclkhs(hfp, bpp, lane_count, intel_dsi->burst_mode_ratio);
hsync = txbyteclkhs(hsync, bpp, lane_count,
intel_dsi->burst_mode_ratio);
hbp = txbyteclkhs(hbp, bpp, lane_count, intel_dsi->burst_mode_ratio);
for_each_dsi_port(port, intel_dsi->ports) {
if (IS_GEN9_LP(dev_priv)) {
/*
* Program hdisplay and vdisplay on MIPI transcoder.
* This is different from calculated hactive and
* vactive, as they are calculated per channel basis,
* whereas these values should be based on resolution.
*/
I915_WRITE(BXT_MIPI_TRANS_HACTIVE(port),
adjusted_mode->crtc_hdisplay);
I915_WRITE(BXT_MIPI_TRANS_VACTIVE(port),
adjusted_mode->crtc_vdisplay);
I915_WRITE(BXT_MIPI_TRANS_VTOTAL(port),
adjusted_mode->crtc_vtotal);
}
I915_WRITE(MIPI_HACTIVE_AREA_COUNT(port), hactive);
I915_WRITE(MIPI_HFP_COUNT(port), hfp);
/* meaningful for video mode non-burst sync pulse mode only,
* can be zero for non-burst sync events and burst modes */
I915_WRITE(MIPI_HSYNC_PADDING_COUNT(port), hsync);
I915_WRITE(MIPI_HBP_COUNT(port), hbp);
/* vertical values are in terms of lines */
I915_WRITE(MIPI_VFP_COUNT(port), vfp);
I915_WRITE(MIPI_VSYNC_PADDING_COUNT(port), vsync);
I915_WRITE(MIPI_VBP_COUNT(port), vbp);
}
}
static u32 pixel_format_to_reg(enum mipi_dsi_pixel_format fmt)
{
switch (fmt) {
case MIPI_DSI_FMT_RGB888:
return VID_MODE_FORMAT_RGB888;
case MIPI_DSI_FMT_RGB666:
return VID_MODE_FORMAT_RGB666;
case MIPI_DSI_FMT_RGB666_PACKED:
return VID_MODE_FORMAT_RGB666_PACKED;
case MIPI_DSI_FMT_RGB565:
return VID_MODE_FORMAT_RGB565;
default:
MISSING_CASE(fmt);
return VID_MODE_FORMAT_RGB666;
}
}
static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
struct intel_crtc_state *pipe_config)
{
struct drm_encoder *encoder = &intel_encoder->base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->base.crtc);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
enum port port;
unsigned int bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
u32 val, tmp;
u16 mode_hdisplay;
DRM_DEBUG_KMS("pipe %c\n", pipe_name(intel_crtc->pipe));
mode_hdisplay = adjusted_mode->crtc_hdisplay;
if (intel_dsi->dual_link) {
mode_hdisplay /= 2;
if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
mode_hdisplay += intel_dsi->pixel_overlap;
}
for_each_dsi_port(port, intel_dsi->ports) {
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
/*
* escape clock divider, 20MHz, shared for A and C.
* device ready must be off when doing this! txclkesc?
*/
tmp = I915_READ(MIPI_CTRL(PORT_A));
tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK;
I915_WRITE(MIPI_CTRL(PORT_A), tmp |
ESCAPE_CLOCK_DIVIDER_1);
/* read request priority is per pipe */
tmp = I915_READ(MIPI_CTRL(port));
tmp &= ~READ_REQUEST_PRIORITY_MASK;
I915_WRITE(MIPI_CTRL(port), tmp |
READ_REQUEST_PRIORITY_HIGH);
} else if (IS_GEN9_LP(dev_priv)) {
enum pipe pipe = intel_crtc->pipe;
tmp = I915_READ(MIPI_CTRL(port));
tmp &= ~BXT_PIPE_SELECT_MASK;
tmp |= BXT_PIPE_SELECT(pipe);
I915_WRITE(MIPI_CTRL(port), tmp);
}
/* XXX: why here, why like this? handling in irq handler?! */
I915_WRITE(MIPI_INTR_STAT(port), 0xffffffff);
I915_WRITE(MIPI_INTR_EN(port), 0xffffffff);
I915_WRITE(MIPI_DPHY_PARAM(port), intel_dsi->dphy_reg);
I915_WRITE(MIPI_DPI_RESOLUTION(port),
adjusted_mode->crtc_vdisplay << VERTICAL_ADDRESS_SHIFT |
mode_hdisplay << HORIZONTAL_ADDRESS_SHIFT);
}
set_dsi_timings(encoder, adjusted_mode);
val = intel_dsi->lane_count << DATA_LANES_PRG_REG_SHIFT;
if (is_cmd_mode(intel_dsi)) {
val |= intel_dsi->channel << CMD_MODE_CHANNEL_NUMBER_SHIFT;
val |= CMD_MODE_DATA_WIDTH_8_BIT; /* XXX */
} else {
val |= intel_dsi->channel << VID_MODE_CHANNEL_NUMBER_SHIFT;
val |= pixel_format_to_reg(intel_dsi->pixel_format);
}
tmp = 0;
if (intel_dsi->eotp_pkt == 0)
tmp |= EOT_DISABLE;
if (intel_dsi->clock_stop)
tmp |= CLOCKSTOP;
if (IS_GEN9_LP(dev_priv)) {
tmp |= BXT_DPHY_DEFEATURE_EN;
if (!is_cmd_mode(intel_dsi))
tmp |= BXT_DEFEATURE_DPI_FIFO_CTR;
}
for_each_dsi_port(port, intel_dsi->ports) {
I915_WRITE(MIPI_DSI_FUNC_PRG(port), val);
/* timeouts for recovery. one frame IIUC. if counter expires,
* EOT and stop state. */
/*
* In burst mode, value greater than one DPI line Time in byte
* clock (txbyteclkhs) To timeout this timer 1+ of the above
* said value is recommended.
*
* In non-burst mode, Value greater than one DPI frame time in
* byte clock(txbyteclkhs) To timeout this timer 1+ of the above
* said value is recommended.
*
* In DBI only mode, value greater than one DBI frame time in
* byte clock(txbyteclkhs) To timeout this timer 1+ of the above
* said value is recommended.
*/
if (is_vid_mode(intel_dsi) &&
intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
I915_WRITE(MIPI_HS_TX_TIMEOUT(port),
txbyteclkhs(adjusted_mode->crtc_htotal, bpp,
intel_dsi->lane_count,
intel_dsi->burst_mode_ratio) + 1);
} else {
I915_WRITE(MIPI_HS_TX_TIMEOUT(port),
txbyteclkhs(adjusted_mode->crtc_vtotal *
adjusted_mode->crtc_htotal,
bpp, intel_dsi->lane_count,
intel_dsi->burst_mode_ratio) + 1);
}
I915_WRITE(MIPI_LP_RX_TIMEOUT(port), intel_dsi->lp_rx_timeout);
I915_WRITE(MIPI_TURN_AROUND_TIMEOUT(port),
intel_dsi->turn_arnd_val);
I915_WRITE(MIPI_DEVICE_RESET_TIMER(port),
intel_dsi->rst_timer_val);
/* dphy stuff */
/* in terms of low power clock */
I915_WRITE(MIPI_INIT_COUNT(port),
txclkesc(intel_dsi->escape_clk_div, 100));
if (IS_GEN9_LP(dev_priv) && (!intel_dsi->dual_link)) {
/*
* BXT spec says write MIPI_INIT_COUNT for
* both the ports, even if only one is
* getting used. So write the other port
* if not in dual link mode.
*/
I915_WRITE(MIPI_INIT_COUNT(port ==
PORT_A ? PORT_C : PORT_A),
intel_dsi->init_count);
}
/* recovery disables */
I915_WRITE(MIPI_EOT_DISABLE(port), tmp);
/* in terms of low power clock */
I915_WRITE(MIPI_INIT_COUNT(port), intel_dsi->init_count);
/* in terms of txbyteclkhs. actual high to low switch +
* MIPI_STOP_STATE_STALL * MIPI_LP_BYTECLK.
*
* XXX: write MIPI_STOP_STATE_STALL?
*/
I915_WRITE(MIPI_HIGH_LOW_SWITCH_COUNT(port),
intel_dsi->hs_to_lp_count);
/* XXX: low power clock equivalence in terms of byte clock.
* the number of byte clocks occupied in one low power clock.
* based on txbyteclkhs and txclkesc.
* txclkesc time / txbyteclk time * (105 + MIPI_STOP_STATE_STALL
* ) / 105.???
*/
I915_WRITE(MIPI_LP_BYTECLK(port), intel_dsi->lp_byte_clk);
if (IS_GEMINILAKE(dev_priv)) {
I915_WRITE(MIPI_TLPX_TIME_COUNT(port),
intel_dsi->lp_byte_clk);
/* Shadow of DPHY reg */
I915_WRITE(MIPI_CLK_LANE_TIMING(port),
intel_dsi->dphy_reg);
}
/* the bw essential for transmitting 16 long packets containing
* 252 bytes meant for dcs write memory command is programmed in
* this register in terms of byte clocks. based on dsi transfer
* rate and the number of lanes configured the time taken to
* transmit 16 long packets in a dsi stream varies. */
I915_WRITE(MIPI_DBI_BW_CTRL(port), intel_dsi->bw_timer);
I915_WRITE(MIPI_CLK_LANE_SWITCH_TIME_CNT(port),
intel_dsi->clk_lp_to_hs_count << LP_HS_SSW_CNT_SHIFT |
intel_dsi->clk_hs_to_lp_count << HS_LP_PWR_SW_CNT_SHIFT);
if (is_vid_mode(intel_dsi))
/* Some panels might have resolution which is not a
* multiple of 64 like 1366 x 768. Enable RANDOM
* resolution support for such panels by default */
I915_WRITE(MIPI_VIDEO_MODE_FORMAT(port),
intel_dsi->video_frmt_cfg_bits |
intel_dsi->video_mode_format |
IP_TG_CONFIG |
RANDOM_DPI_DISPLAY_RESOLUTION);
}
}
static void intel_dsi_unprepare(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
u32 val;
if (!IS_GEMINILAKE(dev_priv)) {
for_each_dsi_port(port, intel_dsi->ports) {
/* Panel commands can be sent when clock is in LP11 */
I915_WRITE(MIPI_DEVICE_READY(port), 0x0);
intel_dsi_reset_clocks(encoder, port);
I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP);
val = I915_READ(MIPI_DSI_FUNC_PRG(port));
val &= ~VID_MODE_FORMAT_MASK;
I915_WRITE(MIPI_DSI_FUNC_PRG(port), val);
I915_WRITE(MIPI_DEVICE_READY(port), 0x1);
}
}
}
static int intel_dsi_get_modes(struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
struct drm_display_mode *mode;
DRM_DEBUG_KMS("\n");
if (!intel_connector->panel.fixed_mode) {
DRM_DEBUG_KMS("no fixed mode\n");
return 0;
}
mode = drm_mode_duplicate(connector->dev,
intel_connector->panel.fixed_mode);
if (!mode) {
DRM_DEBUG_KMS("drm_mode_duplicate failed\n");
return 0;
}
drm_mode_probed_add(connector, mode);
return 1;
}
static int intel_dsi_set_property(struct drm_connector *connector,
struct drm_property *property,
uint64_t val)
{
struct drm_device *dev = connector->dev;
struct intel_connector *intel_connector = to_intel_connector(connector);
struct drm_crtc *crtc;
int ret;
ret = drm_object_property_set_value(&connector->base, property, val);
if (ret)
return ret;
if (property == dev->mode_config.scaling_mode_property) {
if (val == DRM_MODE_SCALE_NONE) {
DRM_DEBUG_KMS("no scaling not supported\n");
return -EINVAL;
}
if (HAS_GMCH_DISPLAY(to_i915(dev)) &&
val == DRM_MODE_SCALE_CENTER) {
DRM_DEBUG_KMS("centering not supported\n");
return -EINVAL;
}
if (intel_connector->panel.fitting_mode == val)
return 0;
intel_connector->panel.fitting_mode = val;
}
crtc = connector->state->crtc;
if (crtc && crtc->state->enable) {
/*
* If the CRTC is enabled, the display will be changed
* according to the new panel fitting mode.
*/
intel_crtc_restore_mode(crtc);
}
return 0;
}
static void intel_dsi_connector_destroy(struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
DRM_DEBUG_KMS("\n");
intel_panel_fini(&intel_connector->panel);
drm_connector_cleanup(connector);
kfree(connector);
}
static void intel_dsi_encoder_destroy(struct drm_encoder *encoder)
{
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
/* dispose of the gpios */
if (intel_dsi->gpio_panel)
gpiod_put(intel_dsi->gpio_panel);
intel_encoder_destroy(encoder);
}
static const struct drm_encoder_funcs intel_dsi_funcs = {
.destroy = intel_dsi_encoder_destroy,
};
static const struct drm_connector_helper_funcs intel_dsi_connector_helper_funcs = {
.get_modes = intel_dsi_get_modes,
.mode_valid = intel_dsi_mode_valid,
};
static const struct drm_connector_funcs intel_dsi_connector_funcs = {
.dpms = drm_atomic_helper_connector_dpms,
.late_register = intel_connector_register,
.early_unregister = intel_connector_unregister,
.destroy = intel_dsi_connector_destroy,
.fill_modes = drm_helper_probe_single_connector_modes,
.set_property = intel_dsi_set_property,
.atomic_get_property = intel_connector_atomic_get_property,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
};
static void intel_dsi_add_properties(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
if (connector->panel.fixed_mode) {
drm_mode_create_scaling_mode_property(dev);
drm_object_attach_property(&connector->base.base,
dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_ASPECT);
connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT;
}
}
void intel_dsi_init(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = &dev_priv->drm;
struct intel_dsi *intel_dsi;
struct intel_encoder *intel_encoder;
struct drm_encoder *encoder;
struct intel_connector *intel_connector;
struct drm_connector *connector;
struct drm_display_mode *scan, *fixed_mode = NULL;
enum port port;
DRM_DEBUG_KMS("\n");
/* There is no detection method for MIPI so rely on VBT */
if (!intel_bios_is_dsi_present(dev_priv, &port))
return;
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
dev_priv->mipi_mmio_base = VLV_MIPI_BASE;
} else if (IS_GEN9_LP(dev_priv)) {
dev_priv->mipi_mmio_base = BXT_MIPI_BASE;
} else {
DRM_ERROR("Unsupported Mipi device to reg base");
return;
}
intel_dsi = kzalloc(sizeof(*intel_dsi), GFP_KERNEL);
if (!intel_dsi)
return;
intel_connector = intel_connector_alloc();
if (!intel_connector) {
kfree(intel_dsi);
return;
}
intel_encoder = &intel_dsi->base;
encoder = &intel_encoder->base;
intel_dsi->attached_connector = intel_connector;
connector = &intel_connector->base;
drm_encoder_init(dev, encoder, &intel_dsi_funcs, DRM_MODE_ENCODER_DSI,
"DSI %c", port_name(port));
intel_encoder->compute_config = intel_dsi_compute_config;
intel_encoder->pre_enable = intel_dsi_pre_enable;
intel_encoder->enable = intel_dsi_enable_nop;
intel_encoder->disable = intel_dsi_disable;
intel_encoder->post_disable = intel_dsi_post_disable;
intel_encoder->get_hw_state = intel_dsi_get_hw_state;
intel_encoder->get_config = intel_dsi_get_config;
intel_connector->get_hw_state = intel_connector_get_hw_state;
intel_encoder->port = port;
/*
* On BYT/CHV, pipe A maps to MIPI DSI port A, pipe B maps to MIPI DSI
* port C. BXT isn't limited like this.
*/
if (IS_GEN9_LP(dev_priv))
intel_encoder->crtc_mask = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C);
else if (port == PORT_A)
intel_encoder->crtc_mask = BIT(PIPE_A);
else
intel_encoder->crtc_mask = BIT(PIPE_B);
if (dev_priv->vbt.dsi.config->dual_link) {
intel_dsi->ports = BIT(PORT_A) | BIT(PORT_C);
switch (dev_priv->vbt.dsi.config->dl_dcs_backlight_ports) {
case DL_DCS_PORT_A:
intel_dsi->dcs_backlight_ports = BIT(PORT_A);
break;
case DL_DCS_PORT_C:
intel_dsi->dcs_backlight_ports = BIT(PORT_C);
break;
default:
case DL_DCS_PORT_A_AND_C:
intel_dsi->dcs_backlight_ports = BIT(PORT_A) | BIT(PORT_C);
break;
}
switch (dev_priv->vbt.dsi.config->dl_dcs_cabc_ports) {
case DL_DCS_PORT_A:
intel_dsi->dcs_cabc_ports = BIT(PORT_A);
break;
case DL_DCS_PORT_C:
intel_dsi->dcs_cabc_ports = BIT(PORT_C);
break;
default:
case DL_DCS_PORT_A_AND_C:
intel_dsi->dcs_cabc_ports = BIT(PORT_A) | BIT(PORT_C);
break;
}
} else {
intel_dsi->ports = BIT(port);
intel_dsi->dcs_backlight_ports = BIT(port);
intel_dsi->dcs_cabc_ports = BIT(port);
}
if (!dev_priv->vbt.dsi.config->cabc_supported)
intel_dsi->dcs_cabc_ports = 0;
/* Create a DSI host (and a device) for each port. */
for_each_dsi_port(port, intel_dsi->ports) {
struct intel_dsi_host *host;
host = intel_dsi_host_init(intel_dsi, port);
if (!host)
goto err;
intel_dsi->dsi_hosts[port] = host;
}
if (!intel_dsi_vbt_init(intel_dsi, MIPI_DSI_GENERIC_PANEL_ID)) {
DRM_DEBUG_KMS("no device found\n");
goto err;
}
/*
* In case of BYT with CRC PMIC, we need to use GPIO for
* Panel control.
*/
if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
(dev_priv->vbt.dsi.config->pwm_blc == PPS_BLC_PMIC)) {
intel_dsi->gpio_panel =
gpiod_get(dev->dev, "panel", GPIOD_OUT_HIGH);
if (IS_ERR(intel_dsi->gpio_panel)) {
DRM_ERROR("Failed to own gpio for panel control\n");
intel_dsi->gpio_panel = NULL;
}
}
intel_encoder->type = INTEL_OUTPUT_DSI;
intel_encoder->power_domain = POWER_DOMAIN_PORT_DSI;
intel_encoder->cloneable = 0;
drm_connector_init(dev, connector, &intel_dsi_connector_funcs,
DRM_MODE_CONNECTOR_DSI);
drm_connector_helper_add(connector, &intel_dsi_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB; /*XXX*/
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
intel_connector_attach_encoder(intel_connector, intel_encoder);
mutex_lock(&dev->mode_config.mutex);
intel_dsi_vbt_get_modes(intel_dsi);
list_for_each_entry(scan, &connector->probed_modes, head) {
if ((scan->type & DRM_MODE_TYPE_PREFERRED)) {
fixed_mode = drm_mode_duplicate(dev, scan);
break;
}
}
mutex_unlock(&dev->mode_config.mutex);
if (!fixed_mode) {
DRM_DEBUG_KMS("no fixed mode\n");
goto err;
}
connector->display_info.width_mm = fixed_mode->width_mm;
connector->display_info.height_mm = fixed_mode->height_mm;
intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
intel_panel_setup_backlight(connector, INVALID_PIPE);
intel_dsi_add_properties(intel_connector);
return;
err:
drm_encoder_cleanup(&intel_encoder->base);
kfree(intel_dsi);
kfree(intel_connector);
}
Reference in New Issue View Git Blame Copy Permalink