mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 07:34:57 +07:00
a85c6f1b29
This driver adds support for the Altera / Intel modular Scatter-Gather Direct Memory Access (mSGDMA) intellectual property (IP) to the Linux DMAengine subsystem. Currently it supports the following op modes: - DMA_MEMCPY - DMA_SG - DMA_SLAVE This implementation has been tested on an Altera Cyclone FPGA connected via PCIe, both on an ARM and an x86 platform. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
642 lines
18 KiB
Plaintext
642 lines
18 KiB
Plaintext
#
|
|
# DMA engine configuration
|
|
#
|
|
|
|
menuconfig DMADEVICES
|
|
bool "DMA Engine support"
|
|
depends on HAS_DMA
|
|
help
|
|
DMA engines can do asynchronous data transfers without
|
|
involving the host CPU. Currently, this framework can be
|
|
used to offload memory copies in the network stack and
|
|
RAID operations in the MD driver. This menu only presents
|
|
DMA Device drivers supported by the configured arch, it may
|
|
be empty in some cases.
|
|
|
|
config DMADEVICES_DEBUG
|
|
bool "DMA Engine debugging"
|
|
depends on DMADEVICES != n
|
|
help
|
|
This is an option for use by developers; most people should
|
|
say N here. This enables DMA engine core and driver debugging.
|
|
|
|
config DMADEVICES_VDEBUG
|
|
bool "DMA Engine verbose debugging"
|
|
depends on DMADEVICES_DEBUG != n
|
|
help
|
|
This is an option for use by developers; most people should
|
|
say N here. This enables deeper (more verbose) debugging of
|
|
the DMA engine core and drivers.
|
|
|
|
|
|
if DMADEVICES
|
|
|
|
comment "DMA Devices"
|
|
|
|
#core
|
|
config ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
bool
|
|
|
|
config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
|
|
bool
|
|
|
|
config DMA_ENGINE
|
|
bool
|
|
|
|
config DMA_VIRTUAL_CHANNELS
|
|
tristate
|
|
|
|
config DMA_ACPI
|
|
def_bool y
|
|
depends on ACPI
|
|
|
|
config DMA_OF
|
|
def_bool y
|
|
depends on OF
|
|
select DMA_ENGINE
|
|
|
|
#devices
|
|
config ALTERA_MSGDMA
|
|
tristate "Altera / Intel mSGDMA Engine"
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for Altera / Intel mSGDMA controller.
|
|
|
|
config AMBA_PL08X
|
|
bool "ARM PrimeCell PL080 or PL081 support"
|
|
depends on ARM_AMBA
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Say yes if your platform has a PL08x DMAC device which can
|
|
provide DMA engine support. This includes the original ARM
|
|
PL080 and PL081, Samsungs PL080 derivative and Faraday
|
|
Technology's FTDMAC020 PL080 derivative.
|
|
|
|
config AMCC_PPC440SPE_ADMA
|
|
tristate "AMCC PPC440SPe ADMA support"
|
|
depends on 440SPe || 440SP
|
|
select DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
select ARCH_HAS_ASYNC_TX_FIND_CHANNEL
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
help
|
|
Enable support for the AMCC PPC440SPe RAID engines.
|
|
|
|
config AT_HDMAC
|
|
tristate "Atmel AHB DMA support"
|
|
depends on ARCH_AT91
|
|
select DMA_ENGINE
|
|
help
|
|
Support the Atmel AHB DMA controller.
|
|
|
|
config AT_XDMAC
|
|
tristate "Atmel XDMA support"
|
|
depends on ARCH_AT91
|
|
select DMA_ENGINE
|
|
help
|
|
Support the Atmel XDMA controller.
|
|
|
|
config AXI_DMAC
|
|
tristate "Analog Devices AXI-DMAC DMA support"
|
|
depends on MICROBLAZE || NIOS2 || ARCH_ZYNQ || ARCH_SOCFPGA || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for the Analog Devices AXI-DMAC peripheral. This DMA
|
|
controller is often used in Analog Device's reference designs for FPGA
|
|
platforms.
|
|
|
|
config BCM_SBA_RAID
|
|
tristate "Broadcom SBA RAID engine support"
|
|
depends on ARM64 || COMPILE_TEST
|
|
depends on MAILBOX && RAID6_PQ
|
|
select DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
select ASYNC_TX_DISABLE_XOR_VAL_DMA
|
|
select ASYNC_TX_DISABLE_PQ_VAL_DMA
|
|
default ARCH_BCM_IPROC
|
|
help
|
|
Enable support for Broadcom SBA RAID Engine. The SBA RAID
|
|
engine is available on most of the Broadcom iProc SoCs. It
|
|
has the capability to offload memcpy, xor and pq computation
|
|
for raid5/6.
|
|
|
|
config COH901318
|
|
bool "ST-Ericsson COH901318 DMA support"
|
|
select DMA_ENGINE
|
|
depends on ARCH_U300 || COMPILE_TEST
|
|
help
|
|
Enable support for ST-Ericsson COH 901 318 DMA.
|
|
|
|
config DMA_BCM2835
|
|
tristate "BCM2835 DMA engine support"
|
|
depends on ARCH_BCM2835
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
|
|
config DMA_JZ4740
|
|
tristate "JZ4740 DMA support"
|
|
depends on MACH_JZ4740 || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
|
|
config DMA_JZ4780
|
|
tristate "JZ4780 DMA support"
|
|
depends on MACH_JZ4780 || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
This selects support for the DMA controller in Ingenic JZ4780 SoCs.
|
|
If you have a board based on such a SoC and wish to use DMA for
|
|
devices which can use the DMA controller, say Y or M here.
|
|
|
|
config DMA_OMAP
|
|
tristate "OMAP DMA support"
|
|
depends on ARCH_OMAP || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
select TI_DMA_CROSSBAR if (SOC_DRA7XX || COMPILE_TEST)
|
|
|
|
config DMA_SA11X0
|
|
tristate "SA-11x0 DMA support"
|
|
depends on ARCH_SA1100 || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support the DMA engine found on Intel StrongARM SA-1100 and
|
|
SA-1110 SoCs. This DMA engine can only be used with on-chip
|
|
devices.
|
|
|
|
config DMA_SUN4I
|
|
tristate "Allwinner A10 DMA SoCs support"
|
|
depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
|
|
default (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for the DMA controller present in the sun4i,
|
|
sun5i and sun7i Allwinner ARM SoCs.
|
|
|
|
config DMA_SUN6I
|
|
tristate "Allwinner A31 SoCs DMA support"
|
|
depends on MACH_SUN6I || MACH_SUN8I || (ARM64 && ARCH_SUNXI) || COMPILE_TEST
|
|
depends on RESET_CONTROLLER
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support for the DMA engine first found in Allwinner A31 SoCs.
|
|
|
|
config EP93XX_DMA
|
|
bool "Cirrus Logic EP93xx DMA support"
|
|
depends on ARCH_EP93XX || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller.
|
|
|
|
config FSL_DMA
|
|
tristate "Freescale Elo series DMA support"
|
|
depends on FSL_SOC
|
|
select DMA_ENGINE
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
---help---
|
|
Enable support for the Freescale Elo series DMA controllers.
|
|
The Elo is the DMA controller on some mpc82xx and mpc83xx parts, the
|
|
EloPlus is on mpc85xx and mpc86xx and Pxxx parts, and the Elo3 is on
|
|
some Txxx and Bxxx parts.
|
|
|
|
config FSL_EDMA
|
|
tristate "Freescale eDMA engine support"
|
|
depends on OF
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support the Freescale eDMA engine with programmable channel
|
|
multiplexing capability for DMA request sources(slot).
|
|
This module can be found on Freescale Vybrid and LS-1 SoCs.
|
|
|
|
config FSL_RAID
|
|
tristate "Freescale RAID engine Support"
|
|
depends on FSL_SOC && !ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
select DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
---help---
|
|
Enable support for Freescale RAID Engine. RAID Engine is
|
|
available on some QorIQ SoCs (like P5020/P5040). It has
|
|
the capability to offload memcpy, xor and pq computation
|
|
for raid5/6.
|
|
|
|
config IMG_MDC_DMA
|
|
tristate "IMG MDC support"
|
|
depends on MIPS || COMPILE_TEST
|
|
depends on MFD_SYSCON
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for the IMG multi-threaded DMA controller (MDC).
|
|
|
|
config IMX_DMA
|
|
tristate "i.MX DMA support"
|
|
depends on ARCH_MXC
|
|
select DMA_ENGINE
|
|
help
|
|
Support the i.MX DMA engine. This engine is integrated into
|
|
Freescale i.MX1/21/27 chips.
|
|
|
|
config IMX_SDMA
|
|
tristate "i.MX SDMA support"
|
|
depends on ARCH_MXC
|
|
select DMA_ENGINE
|
|
help
|
|
Support the i.MX SDMA engine. This engine is integrated into
|
|
Freescale i.MX25/31/35/51/53/6 chips.
|
|
|
|
config INTEL_IDMA64
|
|
tristate "Intel integrated DMA 64-bit support"
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable DMA support for Intel Low Power Subsystem such as found on
|
|
Intel Skylake PCH.
|
|
|
|
config INTEL_IOATDMA
|
|
tristate "Intel I/OAT DMA support"
|
|
depends on PCI && X86_64
|
|
select DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
select DCA
|
|
help
|
|
Enable support for the Intel(R) I/OAT DMA engine present
|
|
in recent Intel Xeon chipsets.
|
|
|
|
Say Y here if you have such a chipset.
|
|
|
|
If unsure, say N.
|
|
|
|
config INTEL_IOP_ADMA
|
|
tristate "Intel IOP ADMA support"
|
|
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX
|
|
select DMA_ENGINE
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
help
|
|
Enable support for the Intel(R) IOP Series RAID engines.
|
|
|
|
config INTEL_MIC_X100_DMA
|
|
tristate "Intel MIC X100 DMA Driver"
|
|
depends on 64BIT && X86 && INTEL_MIC_BUS
|
|
select DMA_ENGINE
|
|
help
|
|
This enables DMA support for the Intel Many Integrated Core
|
|
(MIC) family of PCIe form factor coprocessor X100 devices that
|
|
run a 64 bit Linux OS. This driver will be used by both MIC
|
|
host and card drivers.
|
|
|
|
If you are building host kernel with a MIC device or a card
|
|
kernel for a MIC device, then say M (recommended) or Y, else
|
|
say N. If unsure say N.
|
|
|
|
More information about the Intel MIC family as well as the Linux
|
|
OS and tools for MIC to use with this driver are available from
|
|
<http://software.intel.com/en-us/mic-developer>.
|
|
|
|
config K3_DMA
|
|
tristate "Hisilicon K3 DMA support"
|
|
depends on ARCH_HI3xxx || ARCH_HISI || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support the DMA engine for Hisilicon K3 platform
|
|
devices.
|
|
|
|
config LPC18XX_DMAMUX
|
|
bool "NXP LPC18xx/43xx DMA MUX for PL080"
|
|
depends on ARCH_LPC18XX || COMPILE_TEST
|
|
depends on OF && AMBA_PL08X
|
|
select MFD_SYSCON
|
|
help
|
|
Enable support for DMA on NXP LPC18xx/43xx platforms
|
|
with PL080 and multiplexed DMA request lines.
|
|
|
|
config MMP_PDMA
|
|
bool "MMP PDMA support"
|
|
depends on ARCH_MMP || ARCH_PXA || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
help
|
|
Support the MMP PDMA engine for PXA and MMP platform.
|
|
|
|
config MMP_TDMA
|
|
bool "MMP Two-Channel DMA support"
|
|
depends on ARCH_MMP || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select MMP_SRAM if ARCH_MMP
|
|
select GENERIC_ALLOCATOR
|
|
help
|
|
Support the MMP Two-Channel DMA engine.
|
|
This engine used for MMP Audio DMA and pxa910 SQU.
|
|
It needs sram driver under mach-mmp.
|
|
|
|
config MOXART_DMA
|
|
tristate "MOXART DMA support"
|
|
depends on ARCH_MOXART
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for the MOXA ART SoC DMA controller.
|
|
|
|
Say Y here if you enabled MMP ADMA, otherwise say N.
|
|
|
|
config MPC512X_DMA
|
|
tristate "Freescale MPC512x built-in DMA engine support"
|
|
depends on PPC_MPC512x || PPC_MPC831x
|
|
select DMA_ENGINE
|
|
---help---
|
|
Enable support for the Freescale MPC512x built-in DMA engine.
|
|
|
|
config MV_XOR
|
|
bool "Marvell XOR engine support"
|
|
depends on PLAT_ORION || ARCH_MVEBU || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
---help---
|
|
Enable support for the Marvell XOR engine.
|
|
|
|
config MV_XOR_V2
|
|
bool "Marvell XOR engine version 2 support "
|
|
depends on ARM64
|
|
select DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
select GENERIC_MSI_IRQ_DOMAIN
|
|
---help---
|
|
Enable support for the Marvell version 2 XOR engine.
|
|
|
|
This engine provides acceleration for copy, XOR and RAID6
|
|
operations, and is available on Marvell Armada 7K and 8K
|
|
platforms.
|
|
|
|
config MXS_DMA
|
|
bool "MXS DMA support"
|
|
depends on ARCH_MXS || ARCH_MXC || COMPILE_TEST
|
|
select STMP_DEVICE
|
|
select DMA_ENGINE
|
|
help
|
|
Support the MXS DMA engine. This engine including APBH-DMA
|
|
and APBX-DMA is integrated into some Freescale chips.
|
|
|
|
config MX3_IPU
|
|
bool "MX3x Image Processing Unit support"
|
|
depends on ARCH_MXC
|
|
select DMA_ENGINE
|
|
default y
|
|
help
|
|
If you plan to use the Image Processing unit in the i.MX3x, say
|
|
Y here. If unsure, select Y.
|
|
|
|
config MX3_IPU_IRQS
|
|
int "Number of dynamically mapped interrupts for IPU"
|
|
depends on MX3_IPU
|
|
range 2 137
|
|
default 4
|
|
help
|
|
Out of 137 interrupt sources on i.MX31 IPU only very few are used.
|
|
To avoid bloating the irq_desc[] array we allocate a sufficient
|
|
number of IRQ slots and map them dynamically to specific sources.
|
|
|
|
config NBPFAXI_DMA
|
|
tristate "Renesas Type-AXI NBPF DMA support"
|
|
select DMA_ENGINE
|
|
depends on ARM || COMPILE_TEST
|
|
help
|
|
Support for "Type-AXI" NBPF DMA IPs from Renesas
|
|
|
|
config PCH_DMA
|
|
tristate "Intel EG20T PCH / LAPIS Semicon IOH(ML7213/ML7223/ML7831) DMA"
|
|
depends on PCI && (X86_32 || COMPILE_TEST)
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for Intel EG20T PCH DMA engine.
|
|
|
|
This driver also can be used for LAPIS Semiconductor IOH(Input/
|
|
Output Hub), ML7213, ML7223 and ML7831.
|
|
ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
|
|
for MP(Media Phone) use and ML7831 IOH is for general purpose use.
|
|
ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
|
|
ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
|
|
|
|
config PL330_DMA
|
|
tristate "DMA API Driver for PL330"
|
|
select DMA_ENGINE
|
|
depends on ARM_AMBA
|
|
help
|
|
Select if your platform has one or more PL330 DMACs.
|
|
You need to provide platform specific settings via
|
|
platform_data for a dma-pl330 device.
|
|
|
|
config PXA_DMA
|
|
bool "PXA DMA support"
|
|
depends on (ARCH_MMP || ARCH_PXA)
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support the DMA engine for PXA. It is also compatible with MMP PDMA
|
|
platform. The internal DMA IP of all PXA variants is supported, with
|
|
16 to 32 channels for peripheral to memory or memory to memory
|
|
transfers.
|
|
|
|
config SIRF_DMA
|
|
tristate "CSR SiRFprimaII/SiRFmarco DMA support"
|
|
depends on ARCH_SIRF
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for the CSR SiRFprimaII DMA engine.
|
|
|
|
config STE_DMA40
|
|
bool "ST-Ericsson DMA40 support"
|
|
depends on ARCH_U8500
|
|
select DMA_ENGINE
|
|
help
|
|
Support for ST-Ericsson DMA40 controller
|
|
|
|
config ST_FDMA
|
|
tristate "ST FDMA dmaengine support"
|
|
depends on ARCH_STI
|
|
depends on REMOTEPROC
|
|
select ST_SLIM_REMOTEPROC
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for ST FDMA controller.
|
|
It supports 16 independent DMA channels, accepts up to 32 DMA requests
|
|
|
|
Say Y here if you have such a chipset.
|
|
If unsure, say N.
|
|
|
|
config STM32_DMA
|
|
bool "STMicroelectronics STM32 DMA support"
|
|
depends on ARCH_STM32 || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for the on-chip DMA controller on STMicroelectronics
|
|
STM32 MCUs.
|
|
If you have a board based on such a MCU and wish to use DMA say Y
|
|
here.
|
|
|
|
config S3C24XX_DMAC
|
|
bool "Samsung S3C24XX DMA support"
|
|
depends on ARCH_S3C24XX || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support for the Samsung S3C24XX DMA controller driver. The
|
|
DMA controller is having multiple DMA channels which can be
|
|
configured for different peripherals like audio, UART, SPI.
|
|
The DMA controller can transfer data from memory to peripheral,
|
|
periphal to memory, periphal to periphal and memory to memory.
|
|
|
|
config TXX9_DMAC
|
|
tristate "Toshiba TXx9 SoC DMA support"
|
|
depends on MACH_TX49XX || MACH_TX39XX
|
|
select DMA_ENGINE
|
|
help
|
|
Support the TXx9 SoC internal DMA controller. This can be
|
|
integrated in chips such as the Toshiba TX4927/38/39.
|
|
|
|
config TEGRA20_APB_DMA
|
|
bool "NVIDIA Tegra20 APB DMA support"
|
|
depends on ARCH_TEGRA
|
|
select DMA_ENGINE
|
|
help
|
|
Support for the NVIDIA Tegra20 APB DMA controller driver. The
|
|
DMA controller is having multiple DMA channel which can be
|
|
configured for different peripherals like audio, UART, SPI,
|
|
I2C etc which is in APB bus.
|
|
This DMA controller transfers data from memory to peripheral fifo
|
|
or vice versa. It does not support memory to memory data transfer.
|
|
|
|
config TEGRA210_ADMA
|
|
tristate "NVIDIA Tegra210 ADMA support"
|
|
depends on (ARCH_TEGRA_210_SOC || COMPILE_TEST) && PM_CLK
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support for the NVIDIA Tegra210 ADMA controller driver. The
|
|
DMA controller has multiple DMA channels and is used to service
|
|
various audio clients in the Tegra210 audio processing engine
|
|
(APE). This DMA controller transfers data from memory to
|
|
peripheral and vice versa. It does not support memory to
|
|
memory data transfer.
|
|
|
|
config TIMB_DMA
|
|
tristate "Timberdale FPGA DMA support"
|
|
depends on MFD_TIMBERDALE || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for the Timberdale FPGA DMA engine.
|
|
|
|
config TI_CPPI41
|
|
tristate "CPPI 4.1 DMA support"
|
|
depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX)
|
|
select DMA_ENGINE
|
|
help
|
|
The Communications Port Programming Interface (CPPI) 4.1 DMA engine
|
|
is currently used by the USB driver on AM335x and DA8xx platforms.
|
|
|
|
config TI_DMA_CROSSBAR
|
|
bool
|
|
|
|
config TI_EDMA
|
|
bool "TI EDMA support"
|
|
depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
select TI_DMA_CROSSBAR if (ARCH_OMAP || COMPILE_TEST)
|
|
default n
|
|
help
|
|
Enable support for the TI EDMA controller. This DMA
|
|
engine is found on TI DaVinci and AM33xx parts.
|
|
|
|
config XGENE_DMA
|
|
tristate "APM X-Gene DMA support"
|
|
depends on ARCH_XGENE || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
help
|
|
Enable support for the APM X-Gene SoC DMA engine.
|
|
|
|
config XILINX_DMA
|
|
tristate "Xilinx AXI DMAS Engine"
|
|
depends on (ARCH_ZYNQ || MICROBLAZE || ARM64)
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for Xilinx AXI VDMA Soft IP.
|
|
|
|
AXI VDMA engine provides high-bandwidth direct memory access
|
|
between memory and AXI4-Stream video type target
|
|
peripherals including peripherals which support AXI4-
|
|
Stream Video Protocol. It has two stream interfaces/
|
|
channels, Memory Mapped to Stream (MM2S) and Stream to
|
|
Memory Mapped (S2MM) for the data transfers.
|
|
AXI CDMA engine provides high-bandwidth direct memory access
|
|
between a memory-mapped source address and a memory-mapped
|
|
destination address.
|
|
AXI DMA engine provides high-bandwidth one dimensional direct
|
|
memory access between memory and AXI4-Stream target peripherals.
|
|
|
|
config XILINX_ZYNQMP_DMA
|
|
tristate "Xilinx ZynqMP DMA Engine"
|
|
depends on (ARCH_ZYNQ || MICROBLAZE || ARM64)
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for Xilinx ZynqMP DMA controller.
|
|
|
|
config ZX_DMA
|
|
tristate "ZTE ZX DMA support"
|
|
depends on ARCH_ZX || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support the DMA engine for ZTE ZX family platform devices.
|
|
|
|
|
|
# driver files
|
|
source "drivers/dma/bestcomm/Kconfig"
|
|
|
|
source "drivers/dma/qcom/Kconfig"
|
|
|
|
source "drivers/dma/dw/Kconfig"
|
|
|
|
source "drivers/dma/hsu/Kconfig"
|
|
|
|
source "drivers/dma/sh/Kconfig"
|
|
|
|
# clients
|
|
comment "DMA Clients"
|
|
depends on DMA_ENGINE
|
|
|
|
config ASYNC_TX_DMA
|
|
bool "Async_tx: Offload support for the async_tx api"
|
|
depends on DMA_ENGINE
|
|
help
|
|
This allows the async_tx api to take advantage of offload engines for
|
|
memcpy, memset, xor, and raid6 p+q operations. If your platform has
|
|
a dma engine that can perform raid operations and you have enabled
|
|
MD_RAID456 say Y.
|
|
|
|
If unsure, say N.
|
|
|
|
config DMATEST
|
|
tristate "DMA Test client"
|
|
depends on DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
help
|
|
Simple DMA test client. Say N unless you're debugging a
|
|
DMA Device driver.
|
|
|
|
config DMA_ENGINE_RAID
|
|
bool
|
|
|
|
endif
|