linux_dsm_epyc7002/sound/soc/ux500/ux500_pcm.c
Lars-Peter Clausen acde50a7bf ASoC: dmaengine_pcm: Make FLAG_NO_RESIDUE internal
Whether residue can be reported or not is not a property of the audio
controller but of the DMA controller. The FLAG_NO_RESIDUE was initially
added when the DMAengine framework had no support for describing the residue
reporting capabilities of the controller. Support for this was added quite a
while ago and recently the DMAengine framework started to complain if a
driver does not describe its capabilities and a lot of patches have been
merged that add support for this where it was missing. So it should be safe
to assume that driver on actively used platforms properly implement the DMA
capabilities API.

This patch makes the FLAG_NO_RESIDUE internal and no longer allows audio
controller drivers to manually set the flag. If a DMA driver against
expectations does not support reporting its capabilities for now the generic
DMAengine PCM driver will now emit a warning and simply assume that residue
reporting is not supported. In the future this might be changed to aborting
with an error.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-27 19:26:07 +01:00

168 lines
4.6 KiB
C

/*
* Copyright (C) ST-Ericsson SA 2012
*
* Author: Ola Lilja <ola.o.lilja@stericsson.com>,
* Roger Nilsson <roger.xr.nilsson@stericsson.com>
* for ST-Ericsson.
*
* License terms:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <asm/page.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/slab.h>
#include <linux/platform_data/dma-ste-dma40.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/dmaengine_pcm.h>
#include "ux500_msp_i2s.h"
#include "ux500_pcm.h"
#define UX500_PLATFORM_PERIODS_BYTES_MIN 128
#define UX500_PLATFORM_PERIODS_BYTES_MAX (64 * PAGE_SIZE)
#define UX500_PLATFORM_PERIODS_MIN 2
#define UX500_PLATFORM_PERIODS_MAX 48
#define UX500_PLATFORM_BUFFER_BYTES_MAX (2048 * PAGE_SIZE)
static const struct snd_pcm_hardware ux500_pcm_hw = {
.info = SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_RESUME |
SNDRV_PCM_INFO_PAUSE,
.buffer_bytes_max = UX500_PLATFORM_BUFFER_BYTES_MAX,
.period_bytes_min = UX500_PLATFORM_PERIODS_BYTES_MIN,
.period_bytes_max = UX500_PLATFORM_PERIODS_BYTES_MAX,
.periods_min = UX500_PLATFORM_PERIODS_MIN,
.periods_max = UX500_PLATFORM_PERIODS_MAX,
};
static struct dma_chan *ux500_pcm_request_chan(struct snd_soc_pcm_runtime *rtd,
struct snd_pcm_substream *substream)
{
struct snd_soc_dai *dai = rtd->cpu_dai;
u16 per_data_width, mem_data_width;
struct stedma40_chan_cfg *dma_cfg;
struct ux500_msp_dma_params *dma_params;
dma_params = snd_soc_dai_get_dma_data(dai, substream);
dma_cfg = dma_params->dma_cfg;
mem_data_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
switch (dma_params->data_size) {
case 32:
per_data_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
break;
case 16:
per_data_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
break;
case 8:
per_data_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
break;
default:
per_data_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
dma_cfg->src_info.data_width = mem_data_width;
dma_cfg->dst_info.data_width = per_data_width;
} else {
dma_cfg->src_info.data_width = per_data_width;
dma_cfg->dst_info.data_width = mem_data_width;
}
return snd_dmaengine_pcm_request_channel(stedma40_filter, dma_cfg);
}
static int ux500_pcm_prepare_slave_config(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct dma_slave_config *slave_config)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct msp_i2s_platform_data *pdata = rtd->cpu_dai->dev->platform_data;
struct snd_dmaengine_dai_dma_data *snd_dma_params;
struct ux500_msp_dma_params *ste_dma_params;
dma_addr_t dma_addr;
int ret;
if (pdata) {
ste_dma_params =
snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
dma_addr = ste_dma_params->tx_rx_addr;
} else {
snd_dma_params =
snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
dma_addr = snd_dma_params->addr;
}
ret = snd_hwparams_to_dma_slave_config(substream, params, slave_config);
if (ret)
return ret;
slave_config->dst_maxburst = 4;
slave_config->src_maxburst = 4;
slave_config->src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
slave_config->dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
slave_config->dst_addr = dma_addr;
else
slave_config->src_addr = dma_addr;
return 0;
}
static const struct snd_dmaengine_pcm_config ux500_dmaengine_pcm_config = {
.pcm_hardware = &ux500_pcm_hw,
.compat_request_channel = ux500_pcm_request_chan,
.prealloc_buffer_size = 128 * 1024,
.prepare_slave_config = ux500_pcm_prepare_slave_config,
};
static const struct snd_dmaengine_pcm_config ux500_dmaengine_of_pcm_config = {
.compat_request_channel = ux500_pcm_request_chan,
.prepare_slave_config = ux500_pcm_prepare_slave_config,
};
int ux500_pcm_register_platform(struct platform_device *pdev)
{
const struct snd_dmaengine_pcm_config *pcm_config;
struct device_node *np = pdev->dev.of_node;
int ret;
if (np)
pcm_config = &ux500_dmaengine_of_pcm_config;
else
pcm_config = &ux500_dmaengine_pcm_config;
ret = snd_dmaengine_pcm_register(&pdev->dev, pcm_config,
SND_DMAENGINE_PCM_FLAG_COMPAT);
if (ret < 0) {
dev_err(&pdev->dev,
"%s: ERROR: Failed to register platform '%s' (%d)!\n",
__func__, pdev->name, ret);
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(ux500_pcm_register_platform);
int ux500_pcm_unregister_platform(struct platform_device *pdev)
{
snd_dmaengine_pcm_unregister(&pdev->dev);
return 0;
}
EXPORT_SYMBOL_GPL(ux500_pcm_unregister_platform);