Quentin Schulz 44072b2c8d iio: adc: nau7802: Expose possible gains in sysfs ... The Nuvoton NAU7802 ADC is able to adjust its gain but prior knowledge of its possible values was required to adjust it. Users had to guess the possible gain values based on the ADC datasheet or on this driver's code. This exposes the possible values in the in_voltage_scale_available file of each nau7802 ADC device. The gain is set for the whole ADC and is therefore not configurable by channel. Thus, there exists only one in_voltage_scale_available file for each nau7802 ADC device even if it has two separate channels. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2016-05-21 20:15:04 +01:00
..
accel	iio: accel: Add triggered buffer support for BMA220	2016-05-21 20:06:50 +01:00
adc	iio: adc: nau7802: Expose possible gains in sysfs	2016-05-21 20:15:04 +01:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio: buffer-dmaengine: Use dmaengine_terminate_sync()	2016-02-09 21:05:17 +00:00
chemical	iio: convert to common i2c_check_functionality() return value	2016-02-27 17:17:43 +00:00
common	iio: st_sensors: support open drain mode	2016-04-19 19:58:13 +01:00
dac	iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs	2016-04-10 14:29:06 +01:00
dummy	iio: dummy: Convert IIO dummy to configfs	2016-05-04 11:44:06 +01:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio: st_gyro: Add lsm9ds0-gyro support	2016-04-23 22:47:18 +01:00
health	iio: health/afe4404: ENSEPGAIN is part of CONTROL2 register	2016-05-04 11:14:16 +01:00
humidity	iio: Export I2C module alias information	2016-05-21 20:08:14 +01:00
imu	imu: bmi160: Add avail frequency and scale attributes	2016-05-04 10:51:39 +01:00
light	max44000: Initial triggered buffer support	2016-04-24 10:24:08 +01:00
magnetometer	iio: magn: Add support for BMM150 magnetometer	2016-05-21 17:37:21 +01:00
orientation	iio: orientation: hid-sensor-rotation: Fix memory leak in probe()	2015-05-17 09:10:25 +01:00
potentiometer	iio: max5487: Add support for Maxim digital potentiometers	2016-05-21 20:13:14 +01:00
pressure	iio: Export I2C module alias information	2016-05-21 20:08:14 +01:00
proximity	iio: convert to common i2c_check_functionality() return value	2016-02-27 17:17:43 +00:00
temperature	iio: Export I2C module alias information	2016-05-21 20:08:14 +01:00
trigger	iio: trigger: Introduce IIO hrtimer based trigger	2015-12-03 18:19:27 +00:00
iio_core_trigger.h	iio: fix semicolon in io_core_trigger.h	2013-08-03 18:40:32 +01:00
iio_core.h	iio: Move buffer registration to the core	2014-12-12 12:28:31 +00:00
industrialio-buffer.c	iio: Add helper function for calculating scan index storage size	2016-02-06 18:21:35 +00:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio:core: mounting matrix support	2016-04-23 22:13:05 +01:00
industrialio-event.c	iio: event: Remove negative error code from iio_event_poll	2015-08-12 19:26:39 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
industrialio-triggered-event.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
inkern.c	iio: core: Add devm_ APIs for iio_channel_{get,release}_all	2016-04-19 19:58:15 +01:00
Kconfig	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
Makefile	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00