AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-24 07:55:57 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
43ea6c9ad9
linux_dsm_epyc7002/drivers/mmc/host/sdhci-tegra.c
Sowjanya Komatineni 3c4019f979 mmc: tegra: HW Command Queue Support for Tegra SDMMC 
This patch adds HW Command Queue for supported Tegra SDMMC
controllers.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25 08:40:58 +01:00

1356 lines
39 KiB
C
Raw Blame History

/*
* Copyright (C) 2010 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/iopoll.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/pinctrl/consumer.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/slot-gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/ktime.h>
#include "sdhci-pltfm.h"
#include "cqhci.h"
/* Tegra SDHOST controller vendor register definitions */
#define SDHCI_TEGRA_VENDOR_CLOCK_CTRL 0x100
#define SDHCI_CLOCK_CTRL_TAP_MASK 0x00ff0000
#define SDHCI_CLOCK_CTRL_TAP_SHIFT 16
#define SDHCI_CLOCK_CTRL_TRIM_MASK 0x1f000000
#define SDHCI_CLOCK_CTRL_TRIM_SHIFT 24
#define SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE BIT(5)
#define SDHCI_CLOCK_CTRL_PADPIPE_CLKEN_OVERRIDE BIT(3)
#define SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE BIT(2)
#define SDHCI_TEGRA_VENDOR_SYS_SW_CTRL 0x104
#define SDHCI_TEGRA_SYS_SW_CTRL_ENHANCED_STROBE BIT(31)
#define SDHCI_TEGRA_VENDOR_CAP_OVERRIDES 0x10c
#define SDHCI_TEGRA_CAP_OVERRIDES_DQS_TRIM_MASK 0x00003f00
#define SDHCI_TEGRA_CAP_OVERRIDES_DQS_TRIM_SHIFT 8
#define SDHCI_TEGRA_VENDOR_MISC_CTRL 0x120
#define SDHCI_MISC_CTRL_ENABLE_SDR104 0x8
#define SDHCI_MISC_CTRL_ENABLE_SDR50 0x10
#define SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300 0x20
#define SDHCI_MISC_CTRL_ENABLE_DDR50 0x200
#define SDHCI_TEGRA_VENDOR_DLLCAL_CFG 0x1b0
#define SDHCI_TEGRA_DLLCAL_CALIBRATE BIT(31)
#define SDHCI_TEGRA_VENDOR_DLLCAL_STA 0x1bc
#define SDHCI_TEGRA_DLLCAL_STA_ACTIVE BIT(31)
#define SDHCI_VNDR_TUN_CTRL0_0 0x1c0
#define SDHCI_VNDR_TUN_CTRL0_TUN_HW_TAP 0x20000
#define SDHCI_TEGRA_AUTO_CAL_CONFIG 0x1e4
#define SDHCI_AUTO_CAL_START BIT(31)
#define SDHCI_AUTO_CAL_ENABLE BIT(29)
#define SDHCI_AUTO_CAL_PDPU_OFFSET_MASK 0x0000ffff
#define SDHCI_TEGRA_SDMEM_COMP_PADCTRL 0x1e0
#define SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_MASK 0x0000000f
#define SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_VAL 0x7
#define SDHCI_TEGRA_SDMEM_COMP_PADCTRL_E_INPUT_E_PWRD BIT(31)
#define SDHCI_COMP_PADCTRL_DRVUPDN_OFFSET_MASK 0x07FFF000
#define SDHCI_TEGRA_AUTO_CAL_STATUS 0x1ec
#define SDHCI_TEGRA_AUTO_CAL_ACTIVE BIT(31)
#define NVQUIRK_FORCE_SDHCI_SPEC_200 BIT(0)
#define NVQUIRK_ENABLE_BLOCK_GAP_DET BIT(1)
#define NVQUIRK_ENABLE_SDHCI_SPEC_300 BIT(2)
#define NVQUIRK_ENABLE_SDR50 BIT(3)
#define NVQUIRK_ENABLE_SDR104 BIT(4)
#define NVQUIRK_ENABLE_DDR50 BIT(5)
#define NVQUIRK_HAS_PADCALIB BIT(6)
#define NVQUIRK_NEEDS_PAD_CONTROL BIT(7)
#define NVQUIRK_DIS_CARD_CLK_CONFIG_TAP BIT(8)
/* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */
#define SDHCI_TEGRA_CQE_BASE_ADDR 0xF000
struct sdhci_tegra_soc_data {
const struct sdhci_pltfm_data *pdata;
u32 nvquirks;
};
/* Magic pull up and pull down pad calibration offsets */
struct sdhci_tegra_autocal_offsets {
u32 pull_up_3v3;
u32 pull_down_3v3;
u32 pull_up_3v3_timeout;
u32 pull_down_3v3_timeout;
u32 pull_up_1v8;
u32 pull_down_1v8;
u32 pull_up_1v8_timeout;
u32 pull_down_1v8_timeout;
u32 pull_up_sdr104;
u32 pull_down_sdr104;
u32 pull_up_hs400;
u32 pull_down_hs400;
};
struct sdhci_tegra {
const struct sdhci_tegra_soc_data *soc_data;
struct gpio_desc *power_gpio;
bool ddr_signaling;
bool pad_calib_required;
bool pad_control_available;
struct reset_control *rst;
struct pinctrl *pinctrl_sdmmc;
struct pinctrl_state *pinctrl_state_3v3;
struct pinctrl_state *pinctrl_state_1v8;
struct pinctrl_state *pinctrl_state_3v3_drv;
struct pinctrl_state *pinctrl_state_1v8_drv;
struct sdhci_tegra_autocal_offsets autocal_offsets;
ktime_t last_calib;
u32 default_tap;
u32 default_trim;
u32 dqs_trim;
bool enable_hwcq;
};
static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
if (unlikely((soc_data->nvquirks & NVQUIRK_FORCE_SDHCI_SPEC_200) &&
(reg == SDHCI_HOST_VERSION))) {
/* Erratum: Version register is invalid in HW. */
return SDHCI_SPEC_200;
}
return readw(host->ioaddr + reg);
}
static void tegra_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
switch (reg) {
case SDHCI_TRANSFER_MODE:
/*
* Postpone this write, we must do it together with a
* command write that is down below.
*/
pltfm_host->xfer_mode_shadow = val;
return;
case SDHCI_COMMAND:
writel((val << 16) | pltfm_host->xfer_mode_shadow,
host->ioaddr + SDHCI_TRANSFER_MODE);
return;
}
writew(val, host->ioaddr + reg);
}
static void tegra_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
/* Seems like we're getting spurious timeout and crc errors, so
* disable signalling of them. In case of real errors software
* timers should take care of eventually detecting them.
*/
if (unlikely(reg == SDHCI_SIGNAL_ENABLE))
val &= ~(SDHCI_INT_TIMEOUT|SDHCI_INT_CRC);
writel(val, host->ioaddr + reg);
if (unlikely((soc_data->nvquirks & NVQUIRK_ENABLE_BLOCK_GAP_DET) &&
(reg == SDHCI_INT_ENABLE))) {
/* Erratum: Must enable block gap interrupt detection */
u8 gap_ctrl = readb(host->ioaddr + SDHCI_BLOCK_GAP_CONTROL);
if (val & SDHCI_INT_CARD_INT)
gap_ctrl |= 0x8;
else
gap_ctrl &= ~0x8;
writeb(gap_ctrl, host->ioaddr + SDHCI_BLOCK_GAP_CONTROL);
}
}
static bool tegra_sdhci_configure_card_clk(struct sdhci_host *host, bool enable)
{
bool status;
u32 reg;
reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
status = !!(reg & SDHCI_CLOCK_CARD_EN);
if (status == enable)
return status;
if (enable)
reg |= SDHCI_CLOCK_CARD_EN;
else
reg &= ~SDHCI_CLOCK_CARD_EN;
sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
return status;
}
static void tegra210_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
{
bool is_tuning_cmd = 0;
bool clk_enabled;
u8 cmd;
if (reg == SDHCI_COMMAND) {
cmd = SDHCI_GET_CMD(val);
is_tuning_cmd = cmd == MMC_SEND_TUNING_BLOCK ||
cmd == MMC_SEND_TUNING_BLOCK_HS200;
}
if (is_tuning_cmd)
clk_enabled = tegra_sdhci_configure_card_clk(host, 0);
writew(val, host->ioaddr + reg);
if (is_tuning_cmd) {
udelay(1);
tegra_sdhci_configure_card_clk(host, clk_enabled);
}
}
static unsigned int tegra_sdhci_get_ro(struct sdhci_host *host)
{
return mmc_gpio_get_ro(host->mmc);
}
static bool tegra_sdhci_is_pad_and_regulator_valid(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
int has_1v8, has_3v3;
/*
* The SoCs which have NVQUIRK_NEEDS_PAD_CONTROL require software pad
* voltage configuration in order to perform voltage switching. This
* means that valid pinctrl info is required on SDHCI instances capable
* of performing voltage switching. Whether or not an SDHCI instance is
* capable of voltage switching is determined based on the regulator.
*/
if (!(tegra_host->soc_data->nvquirks & NVQUIRK_NEEDS_PAD_CONTROL))
return true;
if (IS_ERR(host->mmc->supply.vqmmc))
return false;
has_1v8 = regulator_is_supported_voltage(host->mmc->supply.vqmmc,
1700000, 1950000);
has_3v3 = regulator_is_supported_voltage(host->mmc->supply.vqmmc,
2700000, 3600000);
if (has_1v8 == 1 && has_3v3 == 1)
return tegra_host->pad_control_available;
/* Fixed voltage, no pad control required. */
return true;
}
static void tegra_sdhci_set_tap(struct sdhci_host *host, unsigned int tap)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
bool card_clk_enabled = false;
u32 reg;
/*
* Touching the tap values is a bit tricky on some SoC generations.
* The quirk enables a workaround for a glitch that sometimes occurs if
* the tap values are changed.
*/
if (soc_data->nvquirks & NVQUIRK_DIS_CARD_CLK_CONFIG_TAP)
card_clk_enabled = tegra_sdhci_configure_card_clk(host, false);
reg = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
reg &= ~SDHCI_CLOCK_CTRL_TAP_MASK;
reg |= tap << SDHCI_CLOCK_CTRL_TAP_SHIFT;
sdhci_writel(host, reg, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
if (soc_data->nvquirks & NVQUIRK_DIS_CARD_CLK_CONFIG_TAP &&
card_clk_enabled) {
udelay(1);
sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
tegra_sdhci_configure_card_clk(host, card_clk_enabled);
}
}
static void tegra_sdhci_hs400_enhanced_strobe(struct mmc_host *mmc,
struct mmc_ios *ios)
{
struct sdhci_host *host = mmc_priv(mmc);
u32 val;
val = sdhci_readl(host, SDHCI_TEGRA_VENDOR_SYS_SW_CTRL);
if (ios->enhanced_strobe)
val |= SDHCI_TEGRA_SYS_SW_CTRL_ENHANCED_STROBE;
else
val &= ~SDHCI_TEGRA_SYS_SW_CTRL_ENHANCED_STROBE;
sdhci_writel(host, val, SDHCI_TEGRA_VENDOR_SYS_SW_CTRL);
}
static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
u32 misc_ctrl, clk_ctrl, pad_ctrl;
sdhci_reset(host, mask);
if (!(mask & SDHCI_RESET_ALL))
return;
tegra_sdhci_set_tap(host, tegra_host->default_tap);
misc_ctrl = sdhci_readl(host, SDHCI_TEGRA_VENDOR_MISC_CTRL);
clk_ctrl = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
misc_ctrl &= ~(SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300 |
SDHCI_MISC_CTRL_ENABLE_SDR50 |
SDHCI_MISC_CTRL_ENABLE_DDR50 |
SDHCI_MISC_CTRL_ENABLE_SDR104);
clk_ctrl &= ~(SDHCI_CLOCK_CTRL_TRIM_MASK |
SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE);
if (tegra_sdhci_is_pad_and_regulator_valid(host)) {
/* Erratum: Enable SDHCI spec v3.00 support */
if (soc_data->nvquirks & NVQUIRK_ENABLE_SDHCI_SPEC_300)
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300;
/* Advertise UHS modes as supported by host */
if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR50)
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDR50;
if (soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_DDR50;
if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR104)
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDR104;
if (soc_data->nvquirks & SDHCI_MISC_CTRL_ENABLE_SDR50)
clk_ctrl |= SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE;
}
clk_ctrl |= tegra_host->default_trim << SDHCI_CLOCK_CTRL_TRIM_SHIFT;
sdhci_writel(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL);
sdhci_writel(host, clk_ctrl, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
if (soc_data->nvquirks & NVQUIRK_HAS_PADCALIB) {
pad_ctrl = sdhci_readl(host, SDHCI_TEGRA_SDMEM_COMP_PADCTRL);
pad_ctrl &= ~SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_MASK;
pad_ctrl |= SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_VAL;
sdhci_writel(host, pad_ctrl, SDHCI_TEGRA_SDMEM_COMP_PADCTRL);
tegra_host->pad_calib_required = true;
}
tegra_host->ddr_signaling = false;
}
static void tegra_sdhci_configure_cal_pad(struct sdhci_host *host, bool enable)
{
u32 val;
/*
* Enable or disable the additional I/O pad used by the drive strength
* calibration process.
*/
val = sdhci_readl(host, SDHCI_TEGRA_SDMEM_COMP_PADCTRL);
if (enable)
val |= SDHCI_TEGRA_SDMEM_COMP_PADCTRL_E_INPUT_E_PWRD;
else
val &= ~SDHCI_TEGRA_SDMEM_COMP_PADCTRL_E_INPUT_E_PWRD;
sdhci_writel(host, val, SDHCI_TEGRA_SDMEM_COMP_PADCTRL);
if (enable)
usleep_range(1, 2);
}
static void tegra_sdhci_set_pad_autocal_offset(struct sdhci_host *host,
u16 pdpu)
{
u32 reg;
reg = sdhci_readl(host, SDHCI_TEGRA_AUTO_CAL_CONFIG);
reg &= ~SDHCI_AUTO_CAL_PDPU_OFFSET_MASK;
reg |= pdpu;
sdhci_writel(host, reg, SDHCI_TEGRA_AUTO_CAL_CONFIG);
}
static int tegra_sdhci_set_padctrl(struct sdhci_host *host, int voltage,
bool state_drvupdn)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
struct sdhci_tegra_autocal_offsets *offsets =
&tegra_host->autocal_offsets;
struct pinctrl_state *pinctrl_drvupdn = NULL;
int ret = 0;
u8 drvup = 0, drvdn = 0;
u32 reg;
if (!state_drvupdn) {
/* PADS Drive Strength */
if (voltage == MMC_SIGNAL_VOLTAGE_180) {
if (tegra_host->pinctrl_state_1v8_drv) {
pinctrl_drvupdn =
tegra_host->pinctrl_state_1v8_drv;
} else {
drvup = offsets->pull_up_1v8_timeout;
drvdn = offsets->pull_down_1v8_timeout;
}
} else {
if (tegra_host->pinctrl_state_3v3_drv) {
pinctrl_drvupdn =
tegra_host->pinctrl_state_3v3_drv;
} else {
drvup = offsets->pull_up_3v3_timeout;
drvdn = offsets->pull_down_3v3_timeout;
}
}
if (pinctrl_drvupdn != NULL) {
ret = pinctrl_select_state(tegra_host->pinctrl_sdmmc,
pinctrl_drvupdn);
if (ret < 0)
dev_err(mmc_dev(host->mmc),
"failed pads drvupdn, ret: %d\n", ret);
} else if ((drvup) || (drvdn)) {
reg = sdhci_readl(host,
SDHCI_TEGRA_SDMEM_COMP_PADCTRL);
reg &= ~SDHCI_COMP_PADCTRL_DRVUPDN_OFFSET_MASK;
reg |= (drvup << 20) | (drvdn << 12);
sdhci_writel(host, reg,
SDHCI_TEGRA_SDMEM_COMP_PADCTRL);
}
} else {
/* Dual Voltage PADS Voltage selection */
if (!tegra_host->pad_control_available)
return 0;
if (voltage == MMC_SIGNAL_VOLTAGE_180) {
ret = pinctrl_select_state(tegra_host->pinctrl_sdmmc,
tegra_host->pinctrl_state_1v8);
if (ret < 0)
dev_err(mmc_dev(host->mmc),
"setting 1.8V failed, ret: %d\n", ret);
} else {
ret = pinctrl_select_state(tegra_host->pinctrl_sdmmc,
tegra_host->pinctrl_state_3v3);
if (ret < 0)
dev_err(mmc_dev(host->mmc),
"setting 3.3V failed, ret: %d\n", ret);
}
}
return ret;
}
static void tegra_sdhci_pad_autocalib(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
struct sdhci_tegra_autocal_offsets offsets =
tegra_host->autocal_offsets;
struct mmc_ios *ios = &host->mmc->ios;
bool card_clk_enabled;
u16 pdpu;
u32 reg;
int ret;
switch (ios->timing) {
case MMC_TIMING_UHS_SDR104:
pdpu = offsets.pull_down_sdr104 << 8 | offsets.pull_up_sdr104;
break;
case MMC_TIMING_MMC_HS400:
pdpu = offsets.pull_down_hs400 << 8 | offsets.pull_up_hs400;
break;
default:
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
pdpu = offsets.pull_down_1v8 << 8 | offsets.pull_up_1v8;
else
pdpu = offsets.pull_down_3v3 << 8 | offsets.pull_up_3v3;
}
/* Set initial offset before auto-calibration */
tegra_sdhci_set_pad_autocal_offset(host, pdpu);
card_clk_enabled = tegra_sdhci_configure_card_clk(host, false);
tegra_sdhci_configure_cal_pad(host, true);
reg = sdhci_readl(host, SDHCI_TEGRA_AUTO_CAL_CONFIG);
reg |= SDHCI_AUTO_CAL_ENABLE | SDHCI_AUTO_CAL_START;
sdhci_writel(host, reg, SDHCI_TEGRA_AUTO_CAL_CONFIG);
usleep_range(1, 2);
/* 10 ms timeout */
ret = readl_poll_timeout(host->ioaddr + SDHCI_TEGRA_AUTO_CAL_STATUS,
reg, !(reg & SDHCI_TEGRA_AUTO_CAL_ACTIVE),
1000, 10000);
tegra_sdhci_configure_cal_pad(host, false);
tegra_sdhci_configure_card_clk(host, card_clk_enabled);
if (ret) {
dev_err(mmc_dev(host->mmc), "Pad autocal timed out\n");
/* Disable automatic cal and use fixed Drive Strengths */
reg = sdhci_readl(host, SDHCI_TEGRA_AUTO_CAL_CONFIG);
reg &= ~SDHCI_AUTO_CAL_ENABLE;
sdhci_writel(host, reg, SDHCI_TEGRA_AUTO_CAL_CONFIG);
ret = tegra_sdhci_set_padctrl(host, ios->signal_voltage, false);
if (ret < 0)
dev_err(mmc_dev(host->mmc),
"Setting drive strengths failed: %d\n", ret);
}
}
static void tegra_sdhci_parse_pad_autocal_dt(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
struct sdhci_tegra_autocal_offsets *autocal =
&tegra_host->autocal_offsets;
int err;
err = device_property_read_u32(host->mmc->parent,
"nvidia,pad-autocal-pull-up-offset-3v3",
&autocal->pull_up_3v3);
if (err)
autocal->pull_up_3v3 = 0;
err = device_property_read_u32(host->mmc->parent,
"nvidia,pad-autocal-pull-down-offset-3v3",
&autocal->pull_down_3v3);
if (err)
autocal->pull_down_3v3 = 0;
err = device_property_read_u32(host->mmc->parent,
"nvidia,pad-autocal-pull-up-offset-1v8",
&autocal->pull_up_1v8);
if (err)
autocal->pull_up_1v8 = 0;
err = device_property_read_u32(host->mmc->parent,
"nvidia,pad-autocal-pull-down-offset-1v8",
&autocal->pull_down_1v8);
if (err)
autocal->pull_down_1v8 = 0;
err = device_property_read_u32(host->mmc->parent,
"nvidia,pad-autocal-pull-up-offset-3v3-timeout",
&autocal->pull_up_3v3_timeout);
if (err) {
if (!IS_ERR(tegra_host->pinctrl_state_3v3) &&
(tegra_host->pinctrl_state_3v3_drv == NULL))
pr_warn("%s: Missing autocal timeout 3v3-pad drvs\n",
mmc_hostname(host->mmc));
autocal->pull_up_3v3_timeout = 0;
}
err = device_property_read_u32(host->mmc->parent,
"nvidia,pad-autocal-pull-down-offset-3v3-timeout",
&autocal->pull_down_3v3_timeout);
if (err) {
if (!IS_ERR(tegra_host->pinctrl_state_3v3) &&
(tegra_host->pinctrl_state_3v3_drv == NULL))
pr_warn("%s: Missing autocal timeout 3v3-pad drvs\n",
mmc_hostname(host->mmc));
autocal->pull_down_3v3_timeout = 0;
}
err = device_property_read_u32(host->mmc->parent,
"nvidia,pad-autocal-pull-up-offset-1v8-timeout",
&autocal->pull_up_1v8_timeout);
if (err) {
if (!IS_ERR(tegra_host->pinctrl_state_1v8) &&
(tegra_host->pinctrl_state_1v8_drv == NULL))
pr_warn("%s: Missing autocal timeout 1v8-pad drvs\n",
mmc_hostname(host->mmc));
autocal->pull_up_1v8_timeout = 0;
}
err = device_property_read_u32(host->mmc->parent,
"nvidia,pad-autocal-pull-down-offset-1v8-timeout",
&autocal->pull_down_1v8_timeout);
if (err) {
if (!IS_ERR(tegra_host->pinctrl_state_1v8) &&
(tegra_host->pinctrl_state_1v8_drv == NULL))
pr_warn("%s: Missing autocal timeout 1v8-pad drvs\n",
mmc_hostname(host->mmc));
autocal->pull_down_1v8_timeout = 0;
}
err = device_property_read_u32(host->mmc->parent,
"nvidia,pad-autocal-pull-up-offset-sdr104",
&autocal->pull_up_sdr104);
if (err)
autocal->pull_up_sdr104 = autocal->pull_up_1v8;
err = device_property_read_u32(host->mmc->parent,
"nvidia,pad-autocal-pull-down-offset-sdr104",
&autocal->pull_down_sdr104);
if (err)
autocal->pull_down_sdr104 = autocal->pull_down_1v8;
err = device_property_read_u32(host->mmc->parent,
"nvidia,pad-autocal-pull-up-offset-hs400",
&autocal->pull_up_hs400);
if (err)
autocal->pull_up_hs400 = autocal->pull_up_1v8;
err = device_property_read_u32(host->mmc->parent,
"nvidia,pad-autocal-pull-down-offset-hs400",
&autocal->pull_down_hs400);
if (err)
autocal->pull_down_hs400 = autocal->pull_down_1v8;
}
static void tegra_sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct sdhci_host *host = mmc_priv(mmc);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
ktime_t since_calib = ktime_sub(ktime_get(), tegra_host->last_calib);
/* 100 ms calibration interval is specified in the TRM */
if (ktime_to_ms(since_calib) > 100) {
tegra_sdhci_pad_autocalib(host);
tegra_host->last_calib = ktime_get();
}
sdhci_request(mmc, mrq);
}
static void tegra_sdhci_parse_tap_and_trim(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
int err;
err = device_property_read_u32(host->mmc->parent, "nvidia,default-tap",
&tegra_host->default_tap);
if (err)
tegra_host->default_tap = 0;
err = device_property_read_u32(host->mmc->parent, "nvidia,default-trim",
&tegra_host->default_trim);
if (err)
tegra_host->default_trim = 0;
err = device_property_read_u32(host->mmc->parent, "nvidia,dqs-trim",
&tegra_host->dqs_trim);
if (err)
tegra_host->dqs_trim = 0x11;
}
static void tegra_sdhci_parse_dt(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
if (device_property_read_bool(host->mmc->parent, "supports-cqe"))
tegra_host->enable_hwcq = true;
else
tegra_host->enable_hwcq = false;
tegra_sdhci_parse_pad_autocal_dt(host);
tegra_sdhci_parse_tap_and_trim(host);
}
static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
unsigned long host_clk;
if (!clock)
return sdhci_set_clock(host, clock);
/*
* In DDR50/52 modes the Tegra SDHCI controllers require the SDHCI
* divider to be configured to divided the host clock by two. The SDHCI
* clock divider is calculated as part of sdhci_set_clock() by
* sdhci_calc_clk(). The divider is calculated from host->max_clk and
* the requested clock rate.
*
* By setting the host->max_clk to clock * 2 the divider calculation
* will always result in the correct value for DDR50/52 modes,
* regardless of clock rate rounding, which may happen if the value
* from clk_get_rate() is used.
*/
host_clk = tegra_host->ddr_signaling ? clock * 2 : clock;
clk_set_rate(pltfm_host->clk, host_clk);
if (tegra_host->ddr_signaling)
host->max_clk = host_clk;
else
host->max_clk = clk_get_rate(pltfm_host->clk);
sdhci_set_clock(host, clock);
if (tegra_host->pad_calib_required) {
tegra_sdhci_pad_autocalib(host);
tegra_host->pad_calib_required = false;
}
}
static unsigned int tegra_sdhci_get_max_clock(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
return clk_round_rate(pltfm_host->clk, UINT_MAX);
}
static void tegra_sdhci_set_dqs_trim(struct sdhci_host *host, u8 trim)
{
u32 val;
val = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CAP_OVERRIDES);
val &= ~SDHCI_TEGRA_CAP_OVERRIDES_DQS_TRIM_MASK;
val |= trim << SDHCI_TEGRA_CAP_OVERRIDES_DQS_TRIM_SHIFT;
sdhci_writel(host, val, SDHCI_TEGRA_VENDOR_CAP_OVERRIDES);
}
static void tegra_sdhci_hs400_dll_cal(struct sdhci_host *host)
{
u32 reg;
int err;
reg = sdhci_readl(host, SDHCI_TEGRA_VENDOR_DLLCAL_CFG);
reg |= SDHCI_TEGRA_DLLCAL_CALIBRATE;
sdhci_writel(host, reg, SDHCI_TEGRA_VENDOR_DLLCAL_CFG);
/* 1 ms sleep, 5 ms timeout */
err = readl_poll_timeout(host->ioaddr + SDHCI_TEGRA_VENDOR_DLLCAL_STA,
reg, !(reg & SDHCI_TEGRA_DLLCAL_STA_ACTIVE),
1000, 5000);
if (err)
dev_err(mmc_dev(host->mmc),
"HS400 delay line calibration timed out\n");
}
static void tegra_sdhci_set_uhs_signaling(struct sdhci_host *host,
unsigned timing)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
bool set_default_tap = false;
bool set_dqs_trim = false;
bool do_hs400_dll_cal = false;
switch (timing) {
case MMC_TIMING_UHS_SDR50:
case MMC_TIMING_UHS_SDR104:
case MMC_TIMING_MMC_HS200:
/* Don't set default tap on tunable modes. */
break;
case MMC_TIMING_MMC_HS400:
set_dqs_trim = true;
do_hs400_dll_cal = true;
break;
case MMC_TIMING_MMC_DDR52:
case MMC_TIMING_UHS_DDR50:
tegra_host->ddr_signaling = true;
set_default_tap = true;
break;
default:
set_default_tap = true;
break;
}
sdhci_set_uhs_signaling(host, timing);
tegra_sdhci_pad_autocalib(host);
if (set_default_tap)
tegra_sdhci_set_tap(host, tegra_host->default_tap);
if (set_dqs_trim)
tegra_sdhci_set_dqs_trim(host, tegra_host->dqs_trim);
if (do_hs400_dll_cal)
tegra_sdhci_hs400_dll_cal(host);
}
static int tegra_sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
{
unsigned int min, max;
/*
* Start search for minimum tap value at 10, as smaller values are
* may wrongly be reported as working but fail at higher speeds,
* according to the TRM.
*/
min = 10;
while (min < 255) {
tegra_sdhci_set_tap(host, min);
if (!mmc_send_tuning(host->mmc, opcode, NULL))
break;
min++;
}
/* Find the maximum tap value that still passes. */
max = min + 1;
while (max < 255) {
tegra_sdhci_set_tap(host, max);
if (mmc_send_tuning(host->mmc, opcode, NULL)) {
max--;
break;
}
max++;
}
/* The TRM states the ideal tap value is at 75% in the passing range. */
tegra_sdhci_set_tap(host, min + ((max - min) * 3 / 4));
return mmc_send_tuning(host->mmc, opcode, NULL);
}
static int sdhci_tegra_start_signal_voltage_switch(struct mmc_host *mmc,
struct mmc_ios *ios)
{
struct sdhci_host *host = mmc_priv(mmc);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
int ret = 0;
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
ret = tegra_sdhci_set_padctrl(host, ios->signal_voltage, true);
if (ret < 0)
return ret;
ret = sdhci_start_signal_voltage_switch(mmc, ios);
} else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
ret = sdhci_start_signal_voltage_switch(mmc, ios);
if (ret < 0)
return ret;
ret = tegra_sdhci_set_padctrl(host, ios->signal_voltage, true);
}
if (tegra_host->pad_calib_required)
tegra_sdhci_pad_autocalib(host);
return ret;
}
static int tegra_sdhci_init_pinctrl_info(struct device *dev,
struct sdhci_tegra *tegra_host)
{
tegra_host->pinctrl_sdmmc = devm_pinctrl_get(dev);
if (IS_ERR(tegra_host->pinctrl_sdmmc)) {
dev_dbg(dev, "No pinctrl info, err: %ld\n",
PTR_ERR(tegra_host->pinctrl_sdmmc));
return -1;
}
tegra_host->pinctrl_state_1v8_drv = pinctrl_lookup_state(
tegra_host->pinctrl_sdmmc, "sdmmc-1v8-drv");
if (IS_ERR(tegra_host->pinctrl_state_1v8_drv)) {
if (PTR_ERR(tegra_host->pinctrl_state_1v8_drv) == -ENODEV)
tegra_host->pinctrl_state_1v8_drv = NULL;
}
tegra_host->pinctrl_state_3v3_drv = pinctrl_lookup_state(
tegra_host->pinctrl_sdmmc, "sdmmc-3v3-drv");
if (IS_ERR(tegra_host->pinctrl_state_3v3_drv)) {
if (PTR_ERR(tegra_host->pinctrl_state_3v3_drv) == -ENODEV)
tegra_host->pinctrl_state_3v3_drv = NULL;
}
tegra_host->pinctrl_state_3v3 =
pinctrl_lookup_state(tegra_host->pinctrl_sdmmc, "sdmmc-3v3");
if (IS_ERR(tegra_host->pinctrl_state_3v3)) {
dev_warn(dev, "Missing 3.3V pad state, err: %ld\n",
PTR_ERR(tegra_host->pinctrl_state_3v3));
return -1;
}
tegra_host->pinctrl_state_1v8 =
pinctrl_lookup_state(tegra_host->pinctrl_sdmmc, "sdmmc-1v8");
if (IS_ERR(tegra_host->pinctrl_state_1v8)) {
dev_warn(dev, "Missing 1.8V pad state, err: %ld\n",
PTR_ERR(tegra_host->pinctrl_state_1v8));
return -1;
}
tegra_host->pad_control_available = true;
return 0;
}
static void tegra_sdhci_voltage_switch(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
if (soc_data->nvquirks & NVQUIRK_HAS_PADCALIB)
tegra_host->pad_calib_required = true;
}
static void sdhci_tegra_cqe_enable(struct mmc_host *mmc)
{
struct cqhci_host *cq_host = mmc->cqe_private;
u32 cqcfg = 0;
/*
* Tegra SDMMC Controller design prevents write access to BLOCK_COUNT
* registers when CQE is enabled.
*/
cqcfg = cqhci_readl(cq_host, CQHCI_CFG);
if (cqcfg & CQHCI_ENABLE)
cqhci_writel(cq_host, (cqcfg & ~CQHCI_ENABLE), CQHCI_CFG);
sdhci_cqe_enable(mmc);
if (cqcfg & CQHCI_ENABLE)
cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
}
static void sdhci_tegra_dumpregs(struct mmc_host *mmc)
{
sdhci_dumpregs(mmc_priv(mmc));
}
static u32 sdhci_tegra_cqhci_irq(struct sdhci_host *host, u32 intmask)
{
int cmd_error = 0;
int data_error = 0;
if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
return intmask;
cqhci_irq(host->mmc, intmask, cmd_error, data_error);
return 0;
}
static const struct cqhci_host_ops sdhci_tegra_cqhci_ops = {
.enable = sdhci_tegra_cqe_enable,
.disable = sdhci_cqe_disable,
.dumpregs = sdhci_tegra_dumpregs,
};
static const struct sdhci_ops tegra_sdhci_ops = {
.get_ro = tegra_sdhci_get_ro,
.read_w = tegra_sdhci_readw,
.write_l = tegra_sdhci_writel,
.set_clock = tegra_sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = tegra_sdhci_reset,
.platform_execute_tuning = tegra_sdhci_execute_tuning,
.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
.voltage_switch = tegra_sdhci_voltage_switch,
.get_max_clock = tegra_sdhci_get_max_clock,
};
static const struct sdhci_pltfm_data sdhci_tegra20_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.ops = &tegra_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra20 = {
.pdata = &sdhci_tegra20_pdata,
.nvquirks = NVQUIRK_FORCE_SDHCI_SPEC_200 |
NVQUIRK_ENABLE_BLOCK_GAP_DET,
};
static const struct sdhci_pltfm_data sdhci_tegra30_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
SDHCI_QUIRK2_BROKEN_HS200 |
/*
* Auto-CMD23 leads to "Got command interrupt 0x00010000 even
* though no command operation was in progress."
*
* The exact reason is unknown, as the same hardware seems
* to support Auto CMD23 on a downstream 3.1 kernel.
*/
SDHCI_QUIRK2_ACMD23_BROKEN,
.ops = &tegra_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra30 = {
.pdata = &sdhci_tegra30_pdata,
.nvquirks = NVQUIRK_ENABLE_SDHCI_SPEC_300 |
NVQUIRK_ENABLE_SDR50 |
NVQUIRK_ENABLE_SDR104 |
NVQUIRK_HAS_PADCALIB,
};
static const struct sdhci_ops tegra114_sdhci_ops = {
.get_ro = tegra_sdhci_get_ro,
.read_w = tegra_sdhci_readw,
.write_w = tegra_sdhci_writew,
.write_l = tegra_sdhci_writel,
.set_clock = tegra_sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = tegra_sdhci_reset,
.platform_execute_tuning = tegra_sdhci_execute_tuning,
.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
.voltage_switch = tegra_sdhci_voltage_switch,
.get_max_clock = tegra_sdhci_get_max_clock,
};
static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.ops = &tegra114_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra114 = {
.pdata = &sdhci_tegra114_pdata,
};
static const struct sdhci_pltfm_data sdhci_tegra124_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
/*
* The TRM states that the SD/MMC controller found on
* Tegra124 can address 34 bits (the maximum supported by
* the Tegra memory controller), but tests show that DMA
* to or from above 4 GiB doesn't work. This is possibly
* caused by missing programming, though it's not obvious
* what sequence is required. Mark 64-bit DMA broken for
* now to fix this for existing users (e.g. Nyan boards).
*/
SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
.ops = &tegra114_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra124 = {
.pdata = &sdhci_tegra124_pdata,
};
static const struct sdhci_ops tegra210_sdhci_ops = {
.get_ro = tegra_sdhci_get_ro,
.read_w = tegra_sdhci_readw,
.write_w = tegra210_sdhci_writew,
.write_l = tegra_sdhci_writel,
.set_clock = tegra_sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = tegra_sdhci_reset,
.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
.voltage_switch = tegra_sdhci_voltage_switch,
.get_max_clock = tegra_sdhci_get_max_clock,
};
static const struct sdhci_pltfm_data sdhci_tegra210_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.ops = &tegra210_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra210 = {
.pdata = &sdhci_tegra210_pdata,
.nvquirks = NVQUIRK_NEEDS_PAD_CONTROL |
NVQUIRK_HAS_PADCALIB |
NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
NVQUIRK_ENABLE_SDR50 |
NVQUIRK_ENABLE_SDR104,
};
static const struct sdhci_ops tegra186_sdhci_ops = {
.get_ro = tegra_sdhci_get_ro,
.read_w = tegra_sdhci_readw,
.write_l = tegra_sdhci_writel,
.set_clock = tegra_sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = tegra_sdhci_reset,
.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
.voltage_switch = tegra_sdhci_voltage_switch,
.get_max_clock = tegra_sdhci_get_max_clock,
.irq = sdhci_tegra_cqhci_irq,
};
static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
/* SDHCI controllers on Tegra186 support 40-bit addressing.
* IOVA addresses are 48-bit wide on Tegra186.
* With 64-bit dma mask used for SDHCI, accesses can
* be broken. Disable 64-bit dma, which would fall back
* to 32-bit dma mask. Ideally 40-bit dma mask would work,
* But it is not supported as of now.
*/
SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
.ops = &tegra186_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra186 = {
.pdata = &sdhci_tegra186_pdata,
.nvquirks = NVQUIRK_NEEDS_PAD_CONTROL |
NVQUIRK_HAS_PADCALIB |
NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
NVQUIRK_ENABLE_SDR50 |
NVQUIRK_ENABLE_SDR104,
};
static const struct of_device_id sdhci_tegra_dt_match[] = {
{ .compatible = "nvidia,tegra186-sdhci", .data = &soc_data_tegra186 },
{ .compatible = "nvidia,tegra210-sdhci", .data = &soc_data_tegra210 },
{ .compatible = "nvidia,tegra124-sdhci", .data = &soc_data_tegra124 },
{ .compatible = "nvidia,tegra114-sdhci", .data = &soc_data_tegra114 },
{ .compatible = "nvidia,tegra30-sdhci", .data = &soc_data_tegra30 },
{ .compatible = "nvidia,tegra20-sdhci", .data = &soc_data_tegra20 },
{}
};
MODULE_DEVICE_TABLE(of, sdhci_tegra_dt_match);
static int sdhci_tegra_add_host(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
struct cqhci_host *cq_host;
bool dma64;
int ret;
if (!tegra_host->enable_hwcq)
return sdhci_add_host(host);
sdhci_enable_v4_mode(host);
ret = sdhci_setup_host(host);
if (ret)
return ret;
host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
cq_host = devm_kzalloc(host->mmc->parent,
sizeof(*cq_host), GFP_KERNEL);
if (!cq_host) {
ret = -ENOMEM;
goto cleanup;
}
cq_host->mmio = host->ioaddr + SDHCI_TEGRA_CQE_BASE_ADDR;
cq_host->ops = &sdhci_tegra_cqhci_ops;
dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
if (dma64)
cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
ret = cqhci_init(cq_host, host->mmc, dma64);
if (ret)
goto cleanup;
ret = __sdhci_add_host(host);
if (ret)
goto cleanup;
return 0;
cleanup:
sdhci_cleanup_host(host);
return ret;
}
static int sdhci_tegra_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
const struct sdhci_tegra_soc_data *soc_data;
struct sdhci_host *host;
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_tegra *tegra_host;
struct clk *clk;
int rc;
match = of_match_device(sdhci_tegra_dt_match, &pdev->dev);
if (!match)
return -EINVAL;
soc_data = match->data;
host = sdhci_pltfm_init(pdev, soc_data->pdata, sizeof(*tegra_host));
if (IS_ERR(host))
return PTR_ERR(host);
pltfm_host = sdhci_priv(host);
tegra_host = sdhci_pltfm_priv(pltfm_host);
tegra_host->ddr_signaling = false;
tegra_host->pad_calib_required = false;
tegra_host->pad_control_available = false;
tegra_host->soc_data = soc_data;
if (soc_data->nvquirks & NVQUIRK_NEEDS_PAD_CONTROL) {
rc = tegra_sdhci_init_pinctrl_info(&pdev->dev, tegra_host);
if (rc == 0)
host->mmc_host_ops.start_signal_voltage_switch =
sdhci_tegra_start_signal_voltage_switch;
}
/* Hook to periodically rerun pad calibration */
if (soc_data->nvquirks & NVQUIRK_HAS_PADCALIB)
host->mmc_host_ops.request = tegra_sdhci_request;
host->mmc_host_ops.hs400_enhanced_strobe =
tegra_sdhci_hs400_enhanced_strobe;
rc = mmc_of_parse(host->mmc);
if (rc)
goto err_parse_dt;
if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
host->mmc->caps |= MMC_CAP_1_8V_DDR;
tegra_sdhci_parse_dt(host);
tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",
GPIOD_OUT_HIGH);
if (IS_ERR(tegra_host->power_gpio)) {
rc = PTR_ERR(tegra_host->power_gpio);
goto err_power_req;
}
clk = devm_clk_get(mmc_dev(host->mmc), NULL);
if (IS_ERR(clk)) {
dev_err(mmc_dev(host->mmc), "clk err\n");
rc = PTR_ERR(clk);
goto err_clk_get;
}
clk_prepare_enable(clk);
pltfm_host->clk = clk;
tegra_host->rst = devm_reset_control_get_exclusive(&pdev->dev,
"sdhci");
if (IS_ERR(tegra_host->rst)) {
rc = PTR_ERR(tegra_host->rst);
dev_err(&pdev->dev, "failed to get reset control: %d\n", rc);
goto err_rst_get;
}
rc = reset_control_assert(tegra_host->rst);
if (rc)
goto err_rst_get;
usleep_range(2000, 4000);
rc = reset_control_deassert(tegra_host->rst);
if (rc)
goto err_rst_get;
usleep_range(2000, 4000);
rc = sdhci_tegra_add_host(host);
if (rc)
goto err_add_host;
return 0;
err_add_host:
reset_control_assert(tegra_host->rst);
err_rst_get:
clk_disable_unprepare(pltfm_host->clk);
err_clk_get:
err_power_req:
err_parse_dt:
sdhci_pltfm_free(pdev);
return rc;
}
static int sdhci_tegra_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
sdhci_remove_host(host, 0);
reset_control_assert(tegra_host->rst);
usleep_range(2000, 4000);
clk_disable_unprepare(pltfm_host->clk);
sdhci_pltfm_free(pdev);
return 0;
}
static struct platform_driver sdhci_tegra_driver = {
.driver = {
.name = "sdhci-tegra",
.of_match_table = sdhci_tegra_dt_match,
.pm = &sdhci_pltfm_pmops,
},
.probe = sdhci_tegra_probe,
.remove = sdhci_tegra_remove,
};
module_platform_driver(sdhci_tegra_driver);
MODULE_DESCRIPTION("SDHCI driver for Tegra");
MODULE_AUTHOR("Google, Inc.");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink