linux_dsm_epyc7002/drivers/usb/host/ohci-da8xx.c
Axel Haslam 640308b72f USB: ohci: da8xx: Resume the entire host controller
The da8xx ohci controller is not working after suspend and resume.

This is because only the root hub is being resumed.

Balance the ohci_suspend of the suspend path with an ohci_resume
in the resume path so that we resume the entire controller, and not
just the root hub.

Also, while we are here, remove setting device power_state,
as this is no longer needed and scheduled for removal

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 17:31:36 +01:00

595 lines
14 KiB
C

/*
* OHCI HCD (Host Controller Driver) for USB.
*
* TI DA8xx (OMAP-L1x) Bus Glue
*
* Derived from: ohci-omap.c and ohci-s3c2410.c
* Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/regulator/consumer.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <asm/unaligned.h>
#include "ohci.h"
#define DRIVER_DESC "DA8XX"
#define DRV_NAME "ohci-da8xx"
static struct hc_driver __read_mostly ohci_da8xx_hc_driver;
static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq,
u16 wValue, u16 wIndex, char *buf, u16 wLength);
static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf);
struct da8xx_ohci_hcd {
struct usb_hcd *hcd;
struct clk *usb11_clk;
struct phy *usb11_phy;
struct regulator *vbus_reg;
struct notifier_block nb;
unsigned int reg_enabled;
};
#define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
/* Over-current indicator change bitmask */
static volatile u16 ocic_mask;
static int ohci_da8xx_enable(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
int ret;
ret = clk_prepare_enable(da8xx_ohci->usb11_clk);
if (ret)
return ret;
ret = phy_init(da8xx_ohci->usb11_phy);
if (ret)
goto err_phy_init;
ret = phy_power_on(da8xx_ohci->usb11_phy);
if (ret)
goto err_phy_power_on;
return 0;
err_phy_power_on:
phy_exit(da8xx_ohci->usb11_phy);
err_phy_init:
clk_disable_unprepare(da8xx_ohci->usb11_clk);
return ret;
}
static void ohci_da8xx_disable(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
phy_power_off(da8xx_ohci->usb11_phy);
phy_exit(da8xx_ohci->usb11_phy);
clk_disable_unprepare(da8xx_ohci->usb11_clk);
}
static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
int ret;
if (hub && hub->set_power)
return hub->set_power(1, on);
if (!da8xx_ohci->vbus_reg)
return 0;
if (on && !da8xx_ohci->reg_enabled) {
ret = regulator_enable(da8xx_ohci->vbus_reg);
if (ret) {
dev_err(dev, "Failed to enable regulator: %d\n", ret);
return ret;
}
da8xx_ohci->reg_enabled = 1;
} else if (!on && da8xx_ohci->reg_enabled) {
ret = regulator_disable(da8xx_ohci->vbus_reg);
if (ret) {
dev_err(dev, "Failed to disable regulator: %d\n", ret);
return ret;
}
da8xx_ohci->reg_enabled = 0;
}
return 0;
}
static int ohci_da8xx_get_power(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
if (hub && hub->get_power)
return hub->get_power(1);
if (da8xx_ohci->vbus_reg)
return regulator_is_enabled(da8xx_ohci->vbus_reg);
return 1;
}
static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
unsigned int flags;
int ret;
if (hub && hub->get_oci)
return hub->get_oci(1);
if (!da8xx_ohci->vbus_reg)
return 0;
ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags);
if (ret)
return ret;
if (flags & REGULATOR_ERROR_OVER_CURRENT)
return 1;
return 0;
}
static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
if (hub && hub->set_power)
return 1;
if (da8xx_ohci->vbus_reg)
return 1;
return 0;
}
static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
if (hub && hub->get_oci)
return 1;
if (da8xx_ohci->vbus_reg)
return 1;
return 0;
}
static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd)
{
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
if (hub && hub->potpgt)
return 1;
return 0;
}
/*
* Handle the port over-current indicator change.
*/
static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
unsigned port)
{
ocic_mask |= 1 << port;
/* Once over-current is detected, the port needs to be powered down */
if (hub->get_oci(port) > 0)
hub->set_power(port, 0);
}
static int ohci_da8xx_regulator_event(struct notifier_block *nb,
unsigned long event, void *data)
{
struct da8xx_ohci_hcd *da8xx_ohci =
container_of(nb, struct da8xx_ohci_hcd, nb);
if (event & REGULATOR_EVENT_OVER_CURRENT) {
ocic_mask |= 1 << 1;
ohci_da8xx_set_power(da8xx_ohci->hcd, 0);
}
return 0;
}
static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
int ret = 0;
if (hub && hub->ocic_notify) {
ret = hub->ocic_notify(ohci_da8xx_ocic_handler);
} else if (da8xx_ohci->vbus_reg) {
da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event;
ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg,
&da8xx_ohci->nb);
}
if (ret)
dev_err(dev, "Failed to register notifier: %d\n", ret);
return ret;
}
static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd)
{
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
if (hub && hub->ocic_notify)
hub->ocic_notify(NULL);
}
static int ohci_da8xx_reset(struct usb_hcd *hcd)
{
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int result;
u32 rh_a;
dev_dbg(dev, "starting USB controller\n");
result = ohci_da8xx_enable(hcd);
if (result < 0)
return result;
/*
* DA8xx only have 1 port connected to the pins but the HC root hub
* register A reports 2 ports, thus we'll have to override it...
*/
ohci->num_ports = 1;
result = ohci_setup(hcd);
if (result < 0) {
ohci_da8xx_disable(hcd);
return result;
}
/*
* Since we're providing a board-specific root hub port power control
* and over-current reporting, we have to override the HC root hub A
* register's default value, so that ohci_hub_control() could return
* the correct hub descriptor...
*/
rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
if (ohci_da8xx_has_set_power(hcd)) {
rh_a &= ~RH_A_NPS;
rh_a |= RH_A_PSM;
}
if (ohci_da8xx_has_oci(hcd)) {
rh_a &= ~RH_A_NOCP;
rh_a |= RH_A_OCPM;
}
if (ohci_da8xx_has_potpgt(hcd)) {
rh_a &= ~RH_A_POTPGT;
rh_a |= hub->potpgt << 24;
}
ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
return result;
}
/*
* Update the status data from the hub with the over-current indicator change.
*/
static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf)
{
int length = orig_ohci_hub_status_data(hcd, buf);
/* See if we have OCIC bit set on port 1 */
if (ocic_mask & (1 << 1)) {
dev_dbg(hcd->self.controller, "over-current indicator change "
"on port 1\n");
if (!length)
length = 1;
buf[0] |= 1 << 1;
}
return length;
}
/*
* Look at the control requests to the root hub and see if we need to override.
*/
static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
struct device *dev = hcd->self.controller;
int temp;
switch (typeReq) {
case GetPortStatus:
/* Check the port number */
if (wIndex != 1)
break;
dev_dbg(dev, "GetPortStatus(%u)\n", wIndex);
temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1);
/* The port power status (PPS) bit defaults to 1 */
if (!ohci_da8xx_get_power(hcd))
temp &= ~RH_PS_PPS;
/* The port over-current indicator (POCI) bit is always 0 */
if (ohci_da8xx_get_oci(hcd) > 0)
temp |= RH_PS_POCI;
/* The over-current indicator change (OCIC) bit is 0 too */
if (ocic_mask & (1 << wIndex))
temp |= RH_PS_OCIC;
put_unaligned(cpu_to_le32(temp), (__le32 *)buf);
return 0;
case SetPortFeature:
temp = 1;
goto check_port;
case ClearPortFeature:
temp = 0;
check_port:
/* Check the port number */
if (wIndex != 1)
break;
switch (wValue) {
case USB_PORT_FEAT_POWER:
dev_dbg(dev, "%sPortFeature(%u): %s\n",
temp ? "Set" : "Clear", wIndex, "POWER");
return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0;
case USB_PORT_FEAT_C_OVER_CURRENT:
dev_dbg(dev, "%sPortFeature(%u): %s\n",
temp ? "Set" : "Clear", wIndex,
"C_OVER_CURRENT");
if (temp)
ocic_mask |= 1 << wIndex;
else
ocic_mask &= ~(1 << wIndex);
return 0;
}
}
return orig_ohci_hub_control(hcd, typeReq, wValue,
wIndex, buf, wLength);
}
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_OF
static const struct of_device_id da8xx_ohci_ids[] = {
{ .compatible = "ti,da830-ohci" },
{ }
};
MODULE_DEVICE_TABLE(of, da8xx_ohci_ids);
#endif
static int ohci_da8xx_probe(struct platform_device *pdev)
{
struct da8xx_ohci_hcd *da8xx_ohci;
struct usb_hcd *hcd;
struct resource *mem;
int error, irq;
hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd)
return -ENOMEM;
da8xx_ohci = to_da8xx_ohci(hcd);
da8xx_ohci->hcd = hcd;
da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, "usb11");
if (IS_ERR(da8xx_ohci->usb11_clk)) {
error = PTR_ERR(da8xx_ohci->usb11_clk);
if (error != -EPROBE_DEFER)
dev_err(&pdev->dev, "Failed to get clock.\n");
goto err;
}
da8xx_ohci->usb11_phy = devm_phy_get(&pdev->dev, "usb-phy");
if (IS_ERR(da8xx_ohci->usb11_phy)) {
error = PTR_ERR(da8xx_ohci->usb11_phy);
if (error != -EPROBE_DEFER)
dev_err(&pdev->dev, "Failed to get phy.\n");
goto err;
}
da8xx_ohci->vbus_reg = devm_regulator_get_optional(&pdev->dev, "vbus");
if (IS_ERR(da8xx_ohci->vbus_reg)) {
error = PTR_ERR(da8xx_ohci->vbus_reg);
if (error == -ENODEV) {
da8xx_ohci->vbus_reg = NULL;
} else if (error == -EPROBE_DEFER) {
goto err;
} else {
dev_err(&pdev->dev, "Failed to get regulator\n");
goto err;
}
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->regs = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(hcd->regs)) {
error = PTR_ERR(hcd->regs);
goto err;
}
hcd->rsrc_start = mem->start;
hcd->rsrc_len = resource_size(mem);
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
error = -ENODEV;
goto err;
}
error = usb_add_hcd(hcd, irq, 0);
if (error)
goto err;
device_wakeup_enable(hcd->self.controller);
error = ohci_da8xx_register_notify(hcd);
if (error)
goto err_remove_hcd;
return 0;
err_remove_hcd:
usb_remove_hcd(hcd);
err:
usb_put_hcd(hcd);
return error;
}
static int ohci_da8xx_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
ohci_da8xx_unregister_notify(hcd);
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
return 0;
}
#ifdef CONFIG_PM
static int ohci_da8xx_suspend(struct platform_device *pdev,
pm_message_t message)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
bool do_wakeup = device_may_wakeup(&pdev->dev);
int ret;
if (time_before(jiffies, ohci->next_statechange))
msleep(5);
ohci->next_statechange = jiffies;
ret = ohci_suspend(hcd, do_wakeup);
if (ret)
return ret;
ohci_da8xx_disable(hcd);
hcd->state = HC_STATE_SUSPENDED;
return ret;
}
static int ohci_da8xx_resume(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
if (time_before(jiffies, ohci->next_statechange))
msleep(5);
ohci->next_statechange = jiffies;
ret = ohci_da8xx_enable(hcd);
if (ret)
return ret;
ohci_resume(hcd, false);
return 0;
}
#endif
static const struct ohci_driver_overrides da8xx_overrides __initconst = {
.reset = ohci_da8xx_reset,
.extra_priv_size = sizeof(struct da8xx_ohci_hcd),
};
/*
* Driver definition to register with platform structure.
*/
static struct platform_driver ohci_hcd_da8xx_driver = {
.probe = ohci_da8xx_probe,
.remove = ohci_da8xx_remove,
.shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
.suspend = ohci_da8xx_suspend,
.resume = ohci_da8xx_resume,
#endif
.driver = {
.name = DRV_NAME,
.of_match_table = of_match_ptr(da8xx_ohci_ids),
},
};
static int __init ohci_da8xx_init(void)
{
if (usb_disabled())
return -ENODEV;
pr_info("%s: " DRIVER_DESC "\n", DRV_NAME);
ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides);
/*
* The Davinci da8xx HW has some unusual quirks, which require
* da8xx-specific workarounds. We override certain hc_driver
* functions here to achieve that. We explicitly do not enhance
* ohci_driver_overrides to allow this more easily, since this
* is an unusual case, and we don't want to encourage others to
* override these functions by making it too easy.
*/
orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control;
orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data;
ohci_da8xx_hc_driver.hub_status_data = ohci_da8xx_hub_status_data;
ohci_da8xx_hc_driver.hub_control = ohci_da8xx_hub_control;
return platform_driver_register(&ohci_hcd_da8xx_driver);
}
module_init(ohci_da8xx_init);
static void __exit ohci_da8xx_exit(void)
{
platform_driver_unregister(&ohci_hcd_da8xx_driver);
}
module_exit(ohci_da8xx_exit);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRV_NAME);