linux_dsm_epyc7002/drivers/serial/pxa.c

/*
 *  linux/drivers/serial/pxa.c
 *
 *  Based on drivers/serial/8250.c by Russell King.
 *
 *  Author:	Nicolas Pitre
 *  Created:	Feb 20, 2003
 *  Copyright:	(C) 2003 Monta Vista Software, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * Note 1: This driver is made separate from the already too overloaded
 * 8250.c because it needs some kirks of its own and that'll make it
 * easier to add DMA support.
 *
 * Note 2: I'm too sick of device allocation policies for serial ports.
 * If someone else wants to request an "official" allocation of major/minor
 * for this driver please be my guest.  And don't forget that new hardware
 * to come from Intel might have more than 3 or 4 of those UARTs.  Let's
 * hope for a better port registration and dynamic device allocation scheme
 * with the serial core maintainer satisfaction to appear soon.
 */

#include <linux/config.h>

#if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif

#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/serial_reg.h>
#include <linux/circ_buf.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>

#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/arch/pxa-regs.h>


struct uart_pxa_port {
	struct uart_port        port;
	unsigned char           ier;
	unsigned char           lcr;
	unsigned char           mcr;
	unsigned int            lsr_break_flag;
	unsigned int		cken;
	char			*name;
};

static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
{
	offset <<= 2;
	return readl(up->port.membase + offset);
}

static inline void serial_out(struct uart_pxa_port *up, int offset, int value)
{
	offset <<= 2;
	writel(value, up->port.membase + offset);
}

static void serial_pxa_enable_ms(struct uart_port *port)
{
	struct uart_pxa_port *up = (struct uart_pxa_port *)port;

	up->ier |= UART_IER_MSI;
	serial_out(up, UART_IER, up->ier);
}

static void serial_pxa_stop_tx(struct uart_port *port, unsigned int tty_stop)
{
	struct uart_pxa_port *up = (struct uart_pxa_port *)port;

	if (up->ier & UART_IER_THRI) {
		up->ier &= ~UART_IER_THRI;
		serial_out(up, UART_IER, up->ier);
	}
}

static void serial_pxa_stop_rx(struct uart_port *port)
{
	struct uart_pxa_port *up = (struct uart_pxa_port *)port;

	up->ier &= ~UART_IER_RLSI;
	up->port.read_status_mask &= ~UART_LSR_DR;
	serial_out(up, UART_IER, up->ier);
}

static inline void
receive_chars(struct uart_pxa_port *up, int *status, struct pt_regs *regs)
{
	struct tty_struct *tty = up->port.info->tty;
	unsigned int ch, flag;
	int max_count = 256;

	do {
		if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
			if (tty->low_latency)
				tty_flip_buffer_push(tty);
			/*
			 * If this failed then we will throw away the
			 * bytes but must do so to clear interrupts
			 */
		}
		ch = serial_in(up, UART_RX);
		flag = TTY_NORMAL;
		up->port.icount.rx++;

		if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
				       UART_LSR_FE | UART_LSR_OE))) {
			/*
			 * For statistics only
			 */
			if (*status & UART_LSR_BI) {
				*status &= ~(UART_LSR_FE | UART_LSR_PE);
				up->port.icount.brk++;
				/*
				 * We do the SysRQ and SAK checking
				 * here because otherwise the break
				 * may get masked by ignore_status_mask
				 * or read_status_mask.
				 */
				if (uart_handle_break(&up->port))
					goto ignore_char;
			} else if (*status & UART_LSR_PE)
				up->port.icount.parity++;
			else if (*status & UART_LSR_FE)
				up->port.icount.frame++;
			if (*status & UART_LSR_OE)
				up->port.icount.overrun++;

			/*
			 * Mask off conditions which should be ignored.
			 */
			*status &= up->port.read_status_mask;

#ifdef CONFIG_SERIAL_PXA_CONSOLE
			if (up->port.line == up->port.cons->index) {
				/* Recover the break flag from console xmit */
				*status |= up->lsr_break_flag;
				up->lsr_break_flag = 0;
			}
#endif
			if (*status & UART_LSR_BI) {
				flag = TTY_BREAK;
			} else if (*status & UART_LSR_PE)
				flag = TTY_PARITY;
			else if (*status & UART_LSR_FE)
				flag = TTY_FRAME;
		}
		if (uart_handle_sysrq_char(&up->port, ch, regs))
			goto ignore_char;
		if ((*status & up->port.ignore_status_mask) == 0) {
			tty_insert_flip_char(tty, ch, flag);
		}
		if ((*status & UART_LSR_OE) &&
		    tty->flip.count < TTY_FLIPBUF_SIZE) {
			/*
			 * Overrun is special, since it's reported
			 * immediately, and doesn't affect the current
			 * character.
			 */
			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
		}
	ignore_char:
		*status = serial_in(up, UART_LSR);
	} while ((*status & UART_LSR_DR) && (max_count-- > 0));
	tty_flip_buffer_push(tty);
}

static void transmit_chars(struct uart_pxa_port *up)
{
	struct circ_buf *xmit = &up->port.info->xmit;
	int count;

	if (up->port.x_char) {
		serial_out(up, UART_TX, up->port.x_char);
		up->port.icount.tx++;
		up->port.x_char = 0;
		return;
	}
	if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
		serial_pxa_stop_tx(&up->port, 0);
		return;
	}

	count = up->port.fifosize / 2;
	do {
		serial_out(up, UART_TX, xmit->buf[xmit->tail]);
		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
		up->port.icount.tx++;
		if (uart_circ_empty(xmit))
			break;
	} while (--count > 0);

	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
		uart_write_wakeup(&up->port);


	if (uart_circ_empty(xmit))
		serial_pxa_stop_tx(&up->port, 0);
}

static void serial_pxa_start_tx(struct uart_port *port, unsigned int tty_start)
{
	struct uart_pxa_port *up = (struct uart_pxa_port *)port;

	if (!(up->ier & UART_IER_THRI)) {
		up->ier |= UART_IER_THRI;
		serial_out(up, UART_IER, up->ier);
	}
}

static inline void check_modem_status(struct uart_pxa_port *up)
{
	int status;

	status = serial_in(up, UART_MSR);

	if ((status & UART_MSR_ANY_DELTA) == 0)
		return;

	if (status & UART_MSR_TERI)
		up->port.icount.rng++;
	if (status & UART_MSR_DDSR)
		up->port.icount.dsr++;
	if (status & UART_MSR_DDCD)
		uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
	if (status & UART_MSR_DCTS)
		uart_handle_cts_change(&up->port, status & UART_MSR_CTS);

	wake_up_interruptible(&up->port.info->delta_msr_wait);
}

/*
 * This handles the interrupt from one port.
 */
static inline irqreturn_t
serial_pxa_irq(int irq, void *dev_id, struct pt_regs *regs)
{
	struct uart_pxa_port *up = (struct uart_pxa_port *)dev_id;
	unsigned int iir, lsr;

	iir = serial_in(up, UART_IIR);
	if (iir & UART_IIR_NO_INT)
		return IRQ_NONE;
	lsr = serial_in(up, UART_LSR);
	if (lsr & UART_LSR_DR)
		receive_chars(up, &lsr, regs);
	check_modem_status(up);
	if (lsr & UART_LSR_THRE)
		transmit_chars(up);
	return IRQ_HANDLED;
}

static unsigned int serial_pxa_tx_empty(struct uart_port *port)
{
	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
	unsigned long flags;
	unsigned int ret;

	spin_lock_irqsave(&up->port.lock, flags);
	ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
	spin_unlock_irqrestore(&up->port.lock, flags);

	return ret;
}

static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
{
	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
	unsigned long flags;
	unsigned char status;
	unsigned int ret;

return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
	spin_lock_irqsave(&up->port.lock, flags);
	status = serial_in(up, UART_MSR);
	spin_unlock_irqrestore(&up->port.lock, flags);

	ret = 0;
	if (status & UART_MSR_DCD)
		ret |= TIOCM_CAR;
	if (status & UART_MSR_RI)
		ret |= TIOCM_RNG;
	if (status & UART_MSR_DSR)
		ret |= TIOCM_DSR;
	if (status & UART_MSR_CTS)
		ret |= TIOCM_CTS;
	return ret;
}

static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
	unsigned char mcr = 0;

	if (mctrl & TIOCM_RTS)
		mcr |= UART_MCR_RTS;
	if (mctrl & TIOCM_DTR)
		mcr |= UART_MCR_DTR;
	if (mctrl & TIOCM_OUT1)
		mcr |= UART_MCR_OUT1;
	if (mctrl & TIOCM_OUT2)
		mcr |= UART_MCR_OUT2;
	if (mctrl & TIOCM_LOOP)
		mcr |= UART_MCR_LOOP;

	mcr |= up->mcr;

	serial_out(up, UART_MCR, mcr);
}

static void serial_pxa_break_ctl(struct uart_port *port, int break_state)
{
	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
	unsigned long flags;

	spin_lock_irqsave(&up->port.lock, flags);
	if (break_state == -1)
		up->lcr |= UART_LCR_SBC;
	else
		up->lcr &= ~UART_LCR_SBC;
	serial_out(up, UART_LCR, up->lcr);
	spin_unlock_irqrestore(&up->port.lock, flags);
}

#if 0
static void serial_pxa_dma_init(struct pxa_uart *up)
{
	up->rxdma =
		pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up);
	if (up->rxdma < 0)
		goto out;
	up->txdma =
		pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up);
	if (up->txdma < 0)
		goto err_txdma;
	up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL);
	if (!up->dmadesc)
		goto err_alloc;

	/* ... */
err_alloc:
	pxa_free_dma(up->txdma);
err_rxdma:
	pxa_free_dma(up->rxdma);
out:
	return;
}
#endif

static int serial_pxa_startup(struct uart_port *port)
{
	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
	unsigned long flags;
	int retval;

	up->mcr = 0;

	/*
	 * Allocate the IRQ
	 */
	retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up);
	if (retval)
		return retval;

	/*
	 * Clear the FIFO buffers and disable them.
	 * (they will be reenabled in set_termios())
	 */
	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
			UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
	serial_out(up, UART_FCR, 0);

	/*
	 * Clear the interrupt registers.
	 */
	(void) serial_in(up, UART_LSR);
	(void) serial_in(up, UART_RX);
	(void) serial_in(up, UART_IIR);
	(void) serial_in(up, UART_MSR);

	/*
	 * Now, initialize the UART
	 */
	serial_out(up, UART_LCR, UART_LCR_WLEN8);

	spin_lock_irqsave(&up->port.lock, flags);
	up->port.mctrl |= TIOCM_OUT2;
	serial_pxa_set_mctrl(&up->port, up->port.mctrl);
	spin_unlock_irqrestore(&up->port.lock, flags);

	/*
	 * Finally, enable interrupts.  Note: Modem status interrupts
	 * are set via set_termios(), which will be occuring imminently
	 * anyway, so we don't enable them here.
	 */
	up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
	serial_out(up, UART_IER, up->ier);

	/*
	 * And clear the interrupt registers again for luck.
	 */
	(void) serial_in(up, UART_LSR);
	(void) serial_in(up, UART_RX);
	(void) serial_in(up, UART_IIR);
	(void) serial_in(up, UART_MSR);

	return 0;
}

static void serial_pxa_shutdown(struct uart_port *port)
{
	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
	unsigned long flags;

	free_irq(up->port.irq, up);

	/*
	 * Disable interrupts from this port
	 */
	up->ier = 0;
	serial_out(up, UART_IER, 0);

	spin_lock_irqsave(&up->port.lock, flags);
	up->port.mctrl &= ~TIOCM_OUT2;
	serial_pxa_set_mctrl(&up->port, up->port.mctrl);
	spin_unlock_irqrestore(&up->port.lock, flags);

	/*
	 * Disable break condition and FIFOs
	 */
	serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
				  UART_FCR_CLEAR_RCVR |
				  UART_FCR_CLEAR_XMIT);
	serial_out(up, UART_FCR, 0);
}

static void
serial_pxa_set_termios(struct uart_port *port, struct termios *termios,
		       struct termios *old)
{
	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
	unsigned char cval, fcr = 0;
	unsigned long flags;
	unsigned int baud, quot;

	switch (termios->c_cflag & CSIZE) {
	case CS5:
		cval = 0x00;
		break;
	case CS6:
		cval = 0x01;
		break;
	case CS7:
		cval = 0x02;
		break;
	default:
	case CS8:
		cval = 0x03;
		break;
	}

	if (termios->c_cflag & CSTOPB)
		cval |= 0x04;
	if (termios->c_cflag & PARENB)
		cval |= UART_LCR_PARITY;
	if (!(termios->c_cflag & PARODD))
		cval |= UART_LCR_EPAR;

	/*
	 * Ask the core to calculate the divisor for us.
	 */
	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
	quot = uart_get_divisor(port, baud);

	if ((up->port.uartclk / quot) < (2400 * 16))
		fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
	else
		fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;

	/*
	 * Ok, we're now changing the port state.  Do it with
	 * interrupts disabled.
	 */
	spin_lock_irqsave(&up->port.lock, flags);

	/*
	 * Ensure the port will be enabled.
	 * This is required especially for serial console.
	 */
	up->ier |= IER_UUE;

	/*
	 * Update the per-port timeout.
	 */
	uart_update_timeout(port, termios->c_cflag, quot);

	up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
	if (termios->c_iflag & INPCK)
		up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
	if (termios->c_iflag & (BRKINT | PARMRK))
		up->port.read_status_mask |= UART_LSR_BI;

	/*
	 * Characters to ignore
	 */
	up->port.ignore_status_mask = 0;
	if (termios->c_iflag & IGNPAR)
		up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
	if (termios->c_iflag & IGNBRK) {
		up->port.ignore_status_mask |= UART_LSR_BI;
		/*
		 * If we're ignoring parity and break indicators,
		 * ignore overruns too (for real raw support).
		 */
		if (termios->c_iflag & IGNPAR)
			up->port.ignore_status_mask |= UART_LSR_OE;
	}

	/*
	 * ignore all characters if CREAD is not set
	 */
	if ((termios->c_cflag & CREAD) == 0)
		up->port.ignore_status_mask |= UART_LSR_DR;

	/*
	 * CTS flow control flag and modem status interrupts
	 */
	up->ier &= ~UART_IER_MSI;
	if (UART_ENABLE_MS(&up->port, termios->c_cflag))
		up->ier |= UART_IER_MSI;

	serial_out(up, UART_IER, up->ier);

	serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
	serial_out(up, UART_DLL, quot & 0xff);		/* LS of divisor */
	serial_out(up, UART_DLM, quot >> 8);		/* MS of divisor */
	serial_out(up, UART_LCR, cval);		/* reset DLAB */
	up->lcr = cval;					/* Save LCR */
	serial_pxa_set_mctrl(&up->port, up->port.mctrl);
	serial_out(up, UART_FCR, fcr);
	spin_unlock_irqrestore(&up->port.lock, flags);
}

static void
serial_pxa_pm(struct uart_port *port, unsigned int state,
	      unsigned int oldstate)
{
	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
	pxa_set_cken(up->cken, !state);
	if (!state)
		udelay(1);
}

static void serial_pxa_release_port(struct uart_port *port)
{
}

static int serial_pxa_request_port(struct uart_port *port)
{
	return 0;
}

static void serial_pxa_config_port(struct uart_port *port, int flags)
{
	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
	up->port.type = PORT_PXA;
}

static int
serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser)
{
	/* we don't want the core code to modify any port params */
	return -EINVAL;
}

static const char *
serial_pxa_type(struct uart_port *port)
{
	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
	return up->name;
}

#ifdef CONFIG_SERIAL_PXA_CONSOLE

extern struct uart_pxa_port serial_pxa_ports[];
extern struct uart_driver serial_pxa_reg;

#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)

/*
 *	Wait for transmitter & holding register to empty
 */
static inline void wait_for_xmitr(struct uart_pxa_port *up)
{
	unsigned int status, tmout = 10000;

	/* Wait up to 10ms for the character(s) to be sent. */
	do {
		status = serial_in(up, UART_LSR);

		if (status & UART_LSR_BI)
			up->lsr_break_flag = UART_LSR_BI;

		if (--tmout == 0)
			break;
		udelay(1);
	} while ((status & BOTH_EMPTY) != BOTH_EMPTY);

	/* Wait up to 1s for flow control if necessary */
	if (up->port.flags & UPF_CONS_FLOW) {
		tmout = 1000000;
		while (--tmout &&
		       ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
			udelay(1);
	}
}

/*
 * Print a string to the serial port trying not to disturb
 * any possible real use of the port...
 *
 *	The console_lock must be held when we get here.
 */
static void
serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
{
	struct uart_pxa_port *up = &serial_pxa_ports[co->index];
	unsigned int ier;
	int i;

	/*
	 *	First save the UER then disable the interrupts
	 */
	ier = serial_in(up, UART_IER);
	serial_out(up, UART_IER, UART_IER_UUE);

	/*
	 *	Now, do each character
	 */
	for (i = 0; i < count; i++, s++) {
		wait_for_xmitr(up);

		/*
		 *	Send the character out.
		 *	If a LF, also do CR...
		 */
		serial_out(up, UART_TX, *s);
		if (*s == 10) {
			wait_for_xmitr(up);
			serial_out(up, UART_TX, 13);
		}
	}

	/*
	 *	Finally, wait for transmitter to become empty
	 *	and restore the IER
	 */
	wait_for_xmitr(up);
	serial_out(up, UART_IER, ier);
}

static int __init
serial_pxa_console_setup(struct console *co, char *options)
{
	struct uart_pxa_port *up;
	int baud = 9600;
	int bits = 8;
	int parity = 'n';
	int flow = 'n';

	if (co->index == -1 || co->index >= serial_pxa_reg.nr)
		co->index = 0;
       	up = &serial_pxa_ports[co->index];

	if (options)
		uart_parse_options(options, &baud, &parity, &bits, &flow);

	return uart_set_options(&up->port, co, baud, parity, bits, flow);
}

static struct console serial_pxa_console = {
	.name		= "ttyS",
	.write		= serial_pxa_console_write,
	.device		= uart_console_device,
	.setup		= serial_pxa_console_setup,
	.flags		= CON_PRINTBUFFER,
	.index		= -1,
	.data		= &serial_pxa_reg,
};

static int __init
serial_pxa_console_init(void)
{
	register_console(&serial_pxa_console);
	return 0;
}

console_initcall(serial_pxa_console_init);

#define PXA_CONSOLE	&serial_pxa_console
#else
#define PXA_CONSOLE	NULL
#endif

struct uart_ops serial_pxa_pops = {
	.tx_empty	= serial_pxa_tx_empty,
	.set_mctrl	= serial_pxa_set_mctrl,
	.get_mctrl	= serial_pxa_get_mctrl,
	.stop_tx	= serial_pxa_stop_tx,
	.start_tx	= serial_pxa_start_tx,
	.stop_rx	= serial_pxa_stop_rx,
	.enable_ms	= serial_pxa_enable_ms,
	.break_ctl	= serial_pxa_break_ctl,
	.startup	= serial_pxa_startup,
	.shutdown	= serial_pxa_shutdown,
	.set_termios	= serial_pxa_set_termios,
	.pm		= serial_pxa_pm,
	.type		= serial_pxa_type,
	.release_port	= serial_pxa_release_port,
	.request_port	= serial_pxa_request_port,
	.config_port	= serial_pxa_config_port,
	.verify_port	= serial_pxa_verify_port,
};

static struct uart_pxa_port serial_pxa_ports[] = {
     {	/* FFUART */
	.name	= "FFUART",
	.cken	= CKEN6_FFUART,
	.port	= {
		.type		= PORT_PXA,
		.iotype		= UPIO_MEM,
		.membase	= (void *)&FFUART,
		.mapbase	= __PREG(FFUART),
		.irq		= IRQ_FFUART,
		.uartclk	= 921600 * 16,
		.fifosize	= 64,
		.ops		= &serial_pxa_pops,
		.line		= 0,
	},
  }, {	/* BTUART */
	.name	= "BTUART",
	.cken	= CKEN7_BTUART,
	.port	= {
		.type		= PORT_PXA,
		.iotype		= UPIO_MEM,
		.membase	= (void *)&BTUART,
		.mapbase	= __PREG(BTUART),
		.irq		= IRQ_BTUART,
		.uartclk	= 921600 * 16,
		.fifosize	= 64,
		.ops		= &serial_pxa_pops,
		.line		= 1,
	},
  }, {	/* STUART */
	.name	= "STUART",
	.cken	= CKEN5_STUART,
	.port	= {
		.type		= PORT_PXA,
		.iotype		= UPIO_MEM,
		.membase	= (void *)&STUART,
		.mapbase	= __PREG(STUART),
		.irq		= IRQ_STUART,
		.uartclk	= 921600 * 16,
		.fifosize	= 64,
		.ops		= &serial_pxa_pops,
		.line		= 2,
	},
  }
};

static struct uart_driver serial_pxa_reg = {
	.owner		= THIS_MODULE,
	.driver_name	= "PXA serial",
	.devfs_name	= "tts/",
	.dev_name	= "ttyS",
	.major		= TTY_MAJOR,
	.minor		= 64,
	.nr		= ARRAY_SIZE(serial_pxa_ports),
	.cons		= PXA_CONSOLE,
};

static int serial_pxa_suspend(struct device *_dev, pm_message_t state, u32 level)
{
        struct uart_pxa_port *sport = dev_get_drvdata(_dev);

        if (sport && level == SUSPEND_DISABLE)
                uart_suspend_port(&serial_pxa_reg, &sport->port);

        return 0;
}

static int serial_pxa_resume(struct device *_dev, u32 level)
{
        struct uart_pxa_port *sport = dev_get_drvdata(_dev);

        if (sport && level == RESUME_ENABLE)
                uart_resume_port(&serial_pxa_reg, &sport->port);

        return 0;
}

static int serial_pxa_probe(struct device *_dev)
{
	struct platform_device *dev = to_platform_device(_dev);

	serial_pxa_ports[dev->id].port.dev = _dev;
	uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port);
	dev_set_drvdata(_dev, &serial_pxa_ports[dev->id]);
	return 0;
}

static int serial_pxa_remove(struct device *_dev)
{
	struct uart_pxa_port *sport = dev_get_drvdata(_dev);

	dev_set_drvdata(_dev, NULL);

	if (sport)
		uart_remove_one_port(&serial_pxa_reg, &sport->port);

	return 0;
}

static struct device_driver serial_pxa_driver = {
        .name           = "pxa2xx-uart",
        .bus            = &platform_bus_type,
        .probe          = serial_pxa_probe,
        .remove         = serial_pxa_remove,

	.suspend	= serial_pxa_suspend,
	.resume		= serial_pxa_resume,
};

int __init serial_pxa_init(void)
{
	int ret;

	ret = uart_register_driver(&serial_pxa_reg);
	if (ret != 0)
		return ret;

	ret = driver_register(&serial_pxa_driver);
	if (ret != 0)
		uart_unregister_driver(&serial_pxa_reg);

	return ret;
}

void __exit serial_pxa_exit(void)
{
        driver_unregister(&serial_pxa_driver);
	uart_unregister_driver(&serial_pxa_reg);
}

module_init(serial_pxa_init);
module_exit(serial_pxa_exit);

MODULE_LICENSE("GPL");