mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
256ac03750
Allow specifying that a single multiplexer controller can be used to control several parallel multiplexers, thus enabling sharing of the multiplexer controller by different consumers. Add a binding for a first mux controller in the form of a GPIO based mux controller. Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
158 lines
4.6 KiB
Plaintext
158 lines
4.6 KiB
Plaintext
Common multiplexer controller bindings
|
|
======================================
|
|
|
|
A multiplexer (or mux) controller will have one, or several, consumer devices
|
|
that uses the mux controller. Thus, a mux controller can possibly control
|
|
several parallel multiplexers. Presumably there will be at least one
|
|
multiplexer needed by each consumer, but a single mux controller can of course
|
|
control several multiplexers for a single consumer.
|
|
|
|
A mux controller provides a number of states to its consumers, and the state
|
|
space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer,
|
|
0-7 for an 8-way multiplexer, etc.
|
|
|
|
|
|
Consumers
|
|
---------
|
|
|
|
Mux controller consumers should specify a list of mux controllers that they
|
|
want to use with a property containing a 'mux-ctrl-list':
|
|
|
|
mux-ctrl-list ::= <single-mux-ctrl> [mux-ctrl-list]
|
|
single-mux-ctrl ::= <mux-ctrl-phandle> [mux-ctrl-specifier]
|
|
mux-ctrl-phandle : phandle to mux controller node
|
|
mux-ctrl-specifier : array of #mux-control-cells specifying the
|
|
given mux controller (controller specific)
|
|
|
|
Mux controller properties should be named "mux-controls". The exact meaning of
|
|
each mux controller property must be documented in the device tree binding for
|
|
each consumer. An optional property "mux-control-names" may contain a list of
|
|
strings to label each of the mux controllers listed in the "mux-controls"
|
|
property.
|
|
|
|
Drivers for devices that use more than a single mux controller can use the
|
|
"mux-control-names" property to map the name of the requested mux controller
|
|
to an index into the list given by the "mux-controls" property.
|
|
|
|
mux-ctrl-specifier typically encodes the chip-relative mux controller number.
|
|
If the mux controller chip only provides a single mux controller, the
|
|
mux-ctrl-specifier can typically be left out.
|
|
|
|
Example:
|
|
|
|
/* One consumer of a 2-way mux controller (one GPIO-line) */
|
|
mux: mux-controller {
|
|
compatible = "gpio-mux";
|
|
#mux-control-cells = <0>;
|
|
|
|
mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
adc-mux {
|
|
compatible = "io-channel-mux";
|
|
io-channels = <&adc 0>;
|
|
io-channel-names = "parent";
|
|
|
|
mux-controls = <&mux>;
|
|
mux-control-names = "adc";
|
|
|
|
channels = "sync", "in";
|
|
};
|
|
|
|
Note that in the example above, specifying the "mux-control-names" is redundant
|
|
because there is only one mux controller in the list. However, if the driver
|
|
for the consumer node in fact asks for a named mux controller, that name is of
|
|
course still required.
|
|
|
|
/*
|
|
* Two consumers (one for an ADC line and one for an i2c bus) of
|
|
* parallel 4-way multiplexers controlled by the same two GPIO-lines.
|
|
*/
|
|
mux: mux-controller {
|
|
compatible = "gpio-mux";
|
|
#mux-control-cells = <0>;
|
|
|
|
mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
|
|
<&pioA 1 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
adc-mux {
|
|
compatible = "io-channel-mux";
|
|
io-channels = <&adc 0>;
|
|
io-channel-names = "parent";
|
|
|
|
mux-controls = <&mux>;
|
|
|
|
channels = "sync-1", "in", "out", "sync-2";
|
|
};
|
|
|
|
i2c-mux {
|
|
compatible = "i2c-mux";
|
|
i2c-parent = <&i2c1>;
|
|
|
|
mux-controls = <&mux>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
i2c@0 {
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ssd1307: oled@3c {
|
|
/* ... */
|
|
};
|
|
};
|
|
|
|
i2c@3 {
|
|
reg = <3>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pca9555: pca9555@20 {
|
|
/* ... */
|
|
};
|
|
};
|
|
};
|
|
|
|
|
|
Mux controller nodes
|
|
--------------------
|
|
|
|
Mux controller nodes must specify the number of cells used for the
|
|
specifier using the '#mux-control-cells' property.
|
|
|
|
Optionally, mux controller nodes can also specify the state the mux should
|
|
have when it is idle. The idle-state property is used for this. If the
|
|
idle-state is not present, the mux controller is typically left as is when
|
|
it is idle. For multiplexer chips that expose several mux controllers, the
|
|
idle-state property is an array with one idle state for each mux controller.
|
|
|
|
The special value (-1) may be used to indicate that the mux should be left
|
|
as is when it is idle. This is the default, but can still be useful for
|
|
mux controller chips with more than one mux controller, particularly when
|
|
there is a need to "step past" a mux controller and set some other idle
|
|
state for a mux controller with a higher index.
|
|
|
|
Some mux controllers have the ability to disconnect the input/output of the
|
|
multiplexer. Using this disconnected high-impedance state as the idle state
|
|
is indicated with idle state (-2).
|
|
|
|
These constants are available in
|
|
|
|
#include <dt-bindings/mux/mux.h>
|
|
|
|
as MUX_IDLE_AS_IS (-1) and MUX_IDLE_DISCONNECT (-2).
|
|
|
|
An example mux controller node look like this (the adg972a chip is a triple
|
|
4-way multiplexer):
|
|
|
|
mux: mux-controller@50 {
|
|
compatible = "adi,adg792a";
|
|
reg = <0x50>;
|
|
#mux-control-cells = <1>;
|
|
|
|
idle-state = <MUX_IDLE_DISCONNECT MUX_IDLE_AS_IS 2>;
|
|
};
|