mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 12:32:00 +07:00
49a58ba196
Replace all "@" and "_" by "-" in pinmux groups for stm32f7 family. This avoid errors when using yaml to check the bindings. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
290 lines
7.7 KiB
Plaintext
290 lines
7.7 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
|
/*
|
|
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved
|
|
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
|
|
*/
|
|
|
|
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
|
|
#include <dt-bindings/mfd/stm32f7-rcc.h>
|
|
|
|
/ {
|
|
soc {
|
|
pinctrl: pin-controller {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x40020000 0x3000>;
|
|
interrupt-parent = <&exti>;
|
|
st,syscfg = <&syscfg 0x8>;
|
|
pins-are-numbered;
|
|
|
|
gpioa: gpio@40020000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x0 0x400>;
|
|
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>;
|
|
st,bank-name = "GPIOA";
|
|
};
|
|
|
|
gpiob: gpio@40020400 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x400 0x400>;
|
|
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>;
|
|
st,bank-name = "GPIOB";
|
|
};
|
|
|
|
gpioc: gpio@40020800 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x800 0x400>;
|
|
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>;
|
|
st,bank-name = "GPIOC";
|
|
};
|
|
|
|
gpiod: gpio@40020c00 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0xc00 0x400>;
|
|
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>;
|
|
st,bank-name = "GPIOD";
|
|
};
|
|
|
|
gpioe: gpio@40021000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x1000 0x400>;
|
|
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>;
|
|
st,bank-name = "GPIOE";
|
|
};
|
|
|
|
gpiof: gpio@40021400 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x1400 0x400>;
|
|
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>;
|
|
st,bank-name = "GPIOF";
|
|
};
|
|
|
|
gpiog: gpio@40021800 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x1800 0x400>;
|
|
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>;
|
|
st,bank-name = "GPIOG";
|
|
};
|
|
|
|
gpioh: gpio@40021c00 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x1c00 0x400>;
|
|
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>;
|
|
st,bank-name = "GPIOH";
|
|
};
|
|
|
|
gpioi: gpio@40022000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x2000 0x400>;
|
|
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>;
|
|
st,bank-name = "GPIOI";
|
|
};
|
|
|
|
gpioj: gpio@40022400 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x2400 0x400>;
|
|
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>;
|
|
st,bank-name = "GPIOJ";
|
|
};
|
|
|
|
gpiok: gpio@40022800 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x2800 0x400>;
|
|
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>;
|
|
st,bank-name = "GPIOK";
|
|
};
|
|
|
|
cec_pins_a: cec-0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
|
|
slew-rate = <0>;
|
|
drive-open-drain;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
usart1_pins_a: usart1-0 {
|
|
pins1 {
|
|
pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
|
|
bias-disable;
|
|
drive-push-pull;
|
|
slew-rate = <0>;
|
|
};
|
|
pins2 {
|
|
pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
usart1_pins_b: usart1-1 {
|
|
pins1 {
|
|
pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
|
|
bias-disable;
|
|
drive-push-pull;
|
|
slew-rate = <0>;
|
|
};
|
|
pins2 {
|
|
pinmux = <STM32_PINMUX('B', 7, AF7)>; /* USART1_RX */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c1_pins_b: i2c1-0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
|
|
<STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
|
|
bias-disable;
|
|
drive-open-drain;
|
|
slew-rate = <0>;
|
|
};
|
|
};
|
|
|
|
usbotg_hs_pins_a: usbotg-hs-0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
|
|
<STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
|
|
<STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
|
|
<STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
|
|
<STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
|
|
<STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
|
|
<STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
|
|
<STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
|
|
<STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
|
|
<STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
|
|
<STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
|
|
<STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
|
|
bias-disable;
|
|
drive-push-pull;
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
|
|
usbotg_hs_pins_b: usbotg-hs-1 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
|
|
<STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
|
|
<STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
|
|
<STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
|
|
<STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
|
|
<STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
|
|
<STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
|
|
<STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
|
|
<STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
|
|
<STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
|
|
<STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
|
|
<STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
|
|
bias-disable;
|
|
drive-push-pull;
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
|
|
usbotg_fs_pins_a: usbotg-fs-0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
|
|
<STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
|
|
<STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
|
|
bias-disable;
|
|
drive-push-pull;
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
|
|
sdio_pins_a: sdio-pins-a-0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
|
|
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
|
|
<STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */
|
|
<STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */
|
|
<STM32_PINMUX('C', 12, AF12)>, /* SDMMC1 CLK */
|
|
<STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */
|
|
drive-push-pull;
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
|
|
sdio_pins_od_a: sdio-pins-od-a-0 {
|
|
pins1 {
|
|
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
|
|
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
|
|
<STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */
|
|
<STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */
|
|
<STM32_PINMUX('C', 12, AF12)>; /* SDMMC1 CLK */
|
|
drive-push-pull;
|
|
slew-rate = <2>;
|
|
};
|
|
|
|
pins2 {
|
|
pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */
|
|
drive-open-drain;
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
|
|
sdio_pins_b: sdio-pins-b-0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
|
|
<STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
|
|
<STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */
|
|
<STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */
|
|
<STM32_PINMUX('D', 6, AF11)>, /* SDMMC2 CLK */
|
|
<STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */
|
|
drive-push-pull;
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
|
|
sdio_pins_od_b: sdio-pins-od-b-0 {
|
|
pins1 {
|
|
pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
|
|
<STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
|
|
<STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */
|
|
<STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */
|
|
<STM32_PINMUX('D', 6, AF11)>; /* SDMMC2 CLK */
|
|
drive-push-pull;
|
|
slew-rate = <2>;
|
|
};
|
|
|
|
pins2 {
|
|
pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */
|
|
drive-open-drain;
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|