mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 12:27:19 +07:00
de72618cb9
The mmc.txt didn't explicitly say disable-wp is for SD card slot only, but that is what it was designed for in the first place. Remove all disable-wp from emmc or sdio controllers. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
208 lines
3.8 KiB
Plaintext
208 lines
3.8 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
|
|
/*
|
|
* Copyright (C) 2018 O.S. Systems Software LTDA.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "rv1108.dtsi"
|
|
|
|
/ {
|
|
model = "Elgin RV1108 R1 board";
|
|
compatible = "elgin,rv1108-r1", "rockchip,rv1108";
|
|
|
|
memory@60000000 {
|
|
device_type = "memory";
|
|
reg = <0x60000000 0x08000000>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial2:1500000n8";
|
|
};
|
|
|
|
vcc_sys: vsys-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vsys";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&vdd_core>;
|
|
};
|
|
|
|
&emmc {
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
no-sd;
|
|
no-sdio;
|
|
non-removable;
|
|
mmc-ddr-1_8v;
|
|
mmc-hs200-1_8v;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac {
|
|
clock_in_out = "output";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rmii_pins>;
|
|
snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
clock-frequency = <400000>;
|
|
i2c-scl-rising-time-ns = <275>;
|
|
i2c-scl-falling-time-ns = <16>;
|
|
status = "okay";
|
|
|
|
rk805: pmic@18 {
|
|
compatible = "rockchip,rk805";
|
|
reg = <0x18>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
|
|
rockchip,system-power-controller;
|
|
|
|
vcc1-supply = <&vcc_sys>;
|
|
vcc2-supply = <&vcc_sys>;
|
|
vcc3-supply = <&vcc_sys>;
|
|
vcc4-supply = <&vcc_sys>;
|
|
vcc5-supply = <&vdd_buck2>;
|
|
vcc6-supply = <&vdd_buck2>;
|
|
|
|
regulators {
|
|
vdd_core: DCDC_REG1 {
|
|
regulator-name= "vdd_core";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vdd_buck2: DCDC_REG2 {
|
|
regulator-name= "vdd_buck2";
|
|
regulator-min-microvolt = <2200000>;
|
|
regulator-max-microvolt = <2200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-name= "vcc_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_io: DCDC_REG4 {
|
|
regulator-name= "vcc_io";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vdd_10: LDO_REG1 {
|
|
regulator-name= "vdd_10";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_18: LDO_REG2 {
|
|
regulator-name= "vcc_18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd10_pmu: LDO_REG3 {
|
|
regulator-name= "vdd10_pmu";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spim1_clk &spim1_cs0 &spim1_tx &spim1_rx>;
|
|
status = "okay";
|
|
|
|
dh2228fv: dac@0 {
|
|
compatible = "rohm,dh2228fv";
|
|
reg = <0>;
|
|
spi-max-frequency = <24000000>;
|
|
spi-cpha;
|
|
spi-cpol;
|
|
};
|
|
};
|
|
|
|
&u2phy {
|
|
status = "okay";
|
|
|
|
u2phy_host: host-port {
|
|
status = "okay";
|
|
};
|
|
|
|
u2phy_otg: otg-port {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
status = "okay";
|
|
};
|