linux_dsm_epyc7002/drivers/firmware/arm_scmi/sensors.c
Sudeep Holla 430daaf96a firmware: arm_scmi: fix bitfield definitions for SENSOR_DESC attributes
As per the SCMI specification the bitfields for SENSOR_DESC attributes
are as follows:
attributes_low 	[7:0] 	Number of trip points supported
attributes_high	[15:11]	The power-of-10 multiplier in 2's-complement
			format that is applied to the sensor units

Looks like the code developed during the draft versions of the
specification slipped through and are wrong with respect to final
released version. Fix them by adjusting the bitfields appropriately.

Fixes: 5179c523c1 ("firmware: arm_scmi: add initial support for sensor protocol")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-06-12 12:29:10 +01:00

292 lines
6.8 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* System Control and Management Interface (SCMI) Sensor Protocol
*
* Copyright (C) 2018 ARM Ltd.
*/
#include "common.h"
enum scmi_sensor_protocol_cmd {
SENSOR_DESCRIPTION_GET = 0x3,
SENSOR_CONFIG_SET = 0x4,
SENSOR_TRIP_POINT_SET = 0x5,
SENSOR_READING_GET = 0x6,
};
struct scmi_msg_resp_sensor_attributes {
__le16 num_sensors;
u8 max_requests;
u8 reserved;
__le32 reg_addr_low;
__le32 reg_addr_high;
__le32 reg_size;
};
struct scmi_msg_resp_sensor_description {
__le16 num_returned;
__le16 num_remaining;
struct {
__le32 id;
__le32 attributes_low;
#define SUPPORTS_ASYNC_READ(x) ((x) & BIT(31))
#define NUM_TRIP_POINTS(x) ((x) & 0xff)
__le32 attributes_high;
#define SENSOR_TYPE(x) ((x) & 0xff)
#define SENSOR_SCALE(x) (((x) >> 11) & 0x1f)
#define SENSOR_UPDATE_SCALE(x) (((x) >> 22) & 0x1f)
#define SENSOR_UPDATE_BASE(x) (((x) >> 27) & 0x1f)
u8 name[SCMI_MAX_STR_SIZE];
} desc[0];
};
struct scmi_msg_set_sensor_config {
__le32 id;
__le32 event_control;
};
struct scmi_msg_set_sensor_trip_point {
__le32 id;
__le32 event_control;
#define SENSOR_TP_EVENT_MASK (0x3)
#define SENSOR_TP_DISABLED 0x0
#define SENSOR_TP_POSITIVE 0x1
#define SENSOR_TP_NEGATIVE 0x2
#define SENSOR_TP_BOTH 0x3
#define SENSOR_TP_ID(x) (((x) & 0xff) << 4)
__le32 value_low;
__le32 value_high;
};
struct scmi_msg_sensor_reading_get {
__le32 id;
__le32 flags;
#define SENSOR_READ_ASYNC BIT(0)
};
struct sensors_info {
int num_sensors;
int max_requests;
u64 reg_addr;
u32 reg_size;
struct scmi_sensor_info *sensors;
};
static int scmi_sensor_attributes_get(const struct scmi_handle *handle,
struct sensors_info *si)
{
int ret;
struct scmi_xfer *t;
struct scmi_msg_resp_sensor_attributes *attr;
ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
SCMI_PROTOCOL_SENSOR, 0, sizeof(*attr), &t);
if (ret)
return ret;
attr = t->rx.buf;
ret = scmi_do_xfer(handle, t);
if (!ret) {
si->num_sensors = le16_to_cpu(attr->num_sensors);
si->max_requests = attr->max_requests;
si->reg_addr = le32_to_cpu(attr->reg_addr_low) |
(u64)le32_to_cpu(attr->reg_addr_high) << 32;
si->reg_size = le32_to_cpu(attr->reg_size);
}
scmi_xfer_put(handle, t);
return ret;
}
static int scmi_sensor_description_get(const struct scmi_handle *handle,
struct sensors_info *si)
{
int ret, cnt;
u32 desc_index = 0;
u16 num_returned, num_remaining;
struct scmi_xfer *t;
struct scmi_msg_resp_sensor_description *buf;
ret = scmi_xfer_get_init(handle, SENSOR_DESCRIPTION_GET,
SCMI_PROTOCOL_SENSOR, sizeof(__le32), 0, &t);
if (ret)
return ret;
buf = t->rx.buf;
do {
/* Set the number of sensors to be skipped/already read */
*(__le32 *)t->tx.buf = cpu_to_le32(desc_index);
ret = scmi_do_xfer(handle, t);
if (ret)
break;
num_returned = le16_to_cpu(buf->num_returned);
num_remaining = le16_to_cpu(buf->num_remaining);
if (desc_index + num_returned > si->num_sensors) {
dev_err(handle->dev, "No. of sensors can't exceed %d",
si->num_sensors);
break;
}
for (cnt = 0; cnt < num_returned; cnt++) {
u32 attrh;
struct scmi_sensor_info *s;
attrh = le32_to_cpu(buf->desc[cnt].attributes_high);
s = &si->sensors[desc_index + cnt];
s->id = le32_to_cpu(buf->desc[cnt].id);
s->type = SENSOR_TYPE(attrh);
strlcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE);
}
desc_index += num_returned;
/*
* check for both returned and remaining to avoid infinite
* loop due to buggy firmware
*/
} while (num_returned && num_remaining);
scmi_xfer_put(handle, t);
return ret;
}
static int
scmi_sensor_configuration_set(const struct scmi_handle *handle, u32 sensor_id)
{
int ret;
u32 evt_cntl = BIT(0);
struct scmi_xfer *t;
struct scmi_msg_set_sensor_config *cfg;
ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_SET,
SCMI_PROTOCOL_SENSOR, sizeof(*cfg), 0, &t);
if (ret)
return ret;
cfg = t->tx.buf;
cfg->id = cpu_to_le32(sensor_id);
cfg->event_control = cpu_to_le32(evt_cntl);
ret = scmi_do_xfer(handle, t);
scmi_xfer_put(handle, t);
return ret;
}
static int scmi_sensor_trip_point_set(const struct scmi_handle *handle,
u32 sensor_id, u8 trip_id, u64 trip_value)
{
int ret;
u32 evt_cntl = SENSOR_TP_BOTH;
struct scmi_xfer *t;
struct scmi_msg_set_sensor_trip_point *trip;
ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_SET,
SCMI_PROTOCOL_SENSOR, sizeof(*trip), 0, &t);
if (ret)
return ret;
trip = t->tx.buf;
trip->id = cpu_to_le32(sensor_id);
trip->event_control = cpu_to_le32(evt_cntl | SENSOR_TP_ID(trip_id));
trip->value_low = cpu_to_le32(trip_value & 0xffffffff);
trip->value_high = cpu_to_le32(trip_value >> 32);
ret = scmi_do_xfer(handle, t);
scmi_xfer_put(handle, t);
return ret;
}
static int scmi_sensor_reading_get(const struct scmi_handle *handle,
u32 sensor_id, bool async, u64 *value)
{
int ret;
struct scmi_xfer *t;
struct scmi_msg_sensor_reading_get *sensor;
ret = scmi_xfer_get_init(handle, SENSOR_READING_GET,
SCMI_PROTOCOL_SENSOR, sizeof(*sensor),
sizeof(u64), &t);
if (ret)
return ret;
sensor = t->tx.buf;
sensor->id = cpu_to_le32(sensor_id);
sensor->flags = cpu_to_le32(async ? SENSOR_READ_ASYNC : 0);
ret = scmi_do_xfer(handle, t);
if (!ret) {
__le32 *pval = t->rx.buf;
*value = le32_to_cpu(*pval);
*value |= (u64)le32_to_cpu(*(pval + 1)) << 32;
}
scmi_xfer_put(handle, t);
return ret;
}
static const struct scmi_sensor_info *
scmi_sensor_info_get(const struct scmi_handle *handle, u32 sensor_id)
{
struct sensors_info *si = handle->sensor_priv;
return si->sensors + sensor_id;
}
static int scmi_sensor_count_get(const struct scmi_handle *handle)
{
struct sensors_info *si = handle->sensor_priv;
return si->num_sensors;
}
static struct scmi_sensor_ops sensor_ops = {
.count_get = scmi_sensor_count_get,
.info_get = scmi_sensor_info_get,
.configuration_set = scmi_sensor_configuration_set,
.trip_point_set = scmi_sensor_trip_point_set,
.reading_get = scmi_sensor_reading_get,
};
static int scmi_sensors_protocol_init(struct scmi_handle *handle)
{
u32 version;
struct sensors_info *sinfo;
scmi_version_get(handle, SCMI_PROTOCOL_SENSOR, &version);
dev_dbg(handle->dev, "Sensor Version %d.%d\n",
PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
sinfo = devm_kzalloc(handle->dev, sizeof(*sinfo), GFP_KERNEL);
if (!sinfo)
return -ENOMEM;
scmi_sensor_attributes_get(handle, sinfo);
sinfo->sensors = devm_kcalloc(handle->dev, sinfo->num_sensors,
sizeof(*sinfo->sensors), GFP_KERNEL);
if (!sinfo->sensors)
return -ENOMEM;
scmi_sensor_description_get(handle, sinfo);
handle->sensor_ops = &sensor_ops;
handle->sensor_priv = sinfo;
return 0;
}
static int __init scmi_sensors_init(void)
{
return scmi_protocol_register(SCMI_PROTOCOL_SENSOR,
&scmi_sensors_protocol_init);
}
subsys_initcall(scmi_sensors_init);