linux_dsm_epyc7002/drivers/media/radio/radio-sf16fmi.c
Hans Verkuil 32958fdd16 [media] BKL: trivial BKL removal from V4L2 radio drivers
The patch converts a bunch of V4L2 radio drivers to unlocked_ioctl.

These are all simple conversions: most already had a lock and so the ioctl
fop could simply be replaced by unlocked_ioctl.

radio-miropcm20.c was converted to use the new V4L2 core lock.

While doing this work I noticed that many of these drivers initialized
some more fields or muted audio or something like that *after* creating
the device node. This should be done before the device node is created
to prevent problems. Especially hal tends to grab a device node as soon
as it is created.

In one or two cases the mutex_init was even done after the device creation!

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-01 20:10:05 -02:00

413 lines
9.7 KiB
C

/* SF16-FMI and SF16-FMP radio driver for Linux radio support
* heavily based on rtrack driver...
* (c) 1997 M. Kirkwood
* (c) 1998 Petr Vandrovec, vandrove@vc.cvut.cz
*
* Fitted to new interface by Alan Cox <alan@lxorguk.ukuu.org.uk>
* Made working and cleaned up functions <mikael.hedin@irf.se>
* Support for ISAPnP by Ladislav Michl <ladis@psi.cz>
*
* Notes on the hardware
*
* Frequency control is done digitally -- ie out(port,encodefreq(95.8));
* No volume control - only mute/unmute - you have to use line volume
* control on SB-part of SF16-FMI/SF16-FMP
*
* Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
*/
#include <linux/version.h>
#include <linux/kernel.h> /* __setup */
#include <linux/module.h> /* Modules */
#include <linux/init.h> /* Initdata */
#include <linux/ioport.h> /* request_region */
#include <linux/delay.h> /* udelay */
#include <linux/isapnp.h>
#include <linux/mutex.h>
#include <linux/videodev2.h> /* kernel radio structs */
#include <linux/io.h> /* outb, outb_p */
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
MODULE_AUTHOR("Petr Vandrovec, vandrove@vc.cvut.cz and M. Kirkwood");
MODULE_DESCRIPTION("A driver for the SF16-FMI and SF16-FMP radio.");
MODULE_LICENSE("GPL");
static int io = -1;
static int radio_nr = -1;
module_param(io, int, 0);
MODULE_PARM_DESC(io, "I/O address of the SF16-FMI or SF16-FMP card (0x284 or 0x384)");
module_param(radio_nr, int, 0);
#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
struct fmi
{
struct v4l2_device v4l2_dev;
struct video_device vdev;
int io;
bool mute;
unsigned long curfreq; /* freq in kHz */
struct mutex lock;
};
static struct fmi fmi_card;
static struct pnp_dev *dev;
bool pnp_attached;
/* freq is in 1/16 kHz to internal number, hw precision is 50 kHz */
/* It is only useful to give freq in interval of 800 (=0.05Mhz),
* other bits will be truncated, e.g 92.7400016 -> 92.7, but
* 92.7400017 -> 92.75
*/
#define RSF16_ENCODE(x) ((x) / 800 + 214)
#define RSF16_MINFREQ (87 * 16000)
#define RSF16_MAXFREQ (108 * 16000)
static void outbits(int bits, unsigned int data, int io)
{
while (bits--) {
if (data & 1) {
outb(5, io);
udelay(6);
outb(7, io);
udelay(6);
} else {
outb(1, io);
udelay(6);
outb(3, io);
udelay(6);
}
data >>= 1;
}
}
static inline void fmi_mute(struct fmi *fmi)
{
mutex_lock(&fmi->lock);
outb(0x00, fmi->io);
mutex_unlock(&fmi->lock);
}
static inline void fmi_unmute(struct fmi *fmi)
{
mutex_lock(&fmi->lock);
outb(0x08, fmi->io);
mutex_unlock(&fmi->lock);
}
static inline int fmi_setfreq(struct fmi *fmi, unsigned long freq)
{
mutex_lock(&fmi->lock);
fmi->curfreq = freq;
outbits(16, RSF16_ENCODE(freq), fmi->io);
outbits(8, 0xC0, fmi->io);
msleep(143); /* was schedule_timeout(HZ/7) */
mutex_unlock(&fmi->lock);
if (!fmi->mute)
fmi_unmute(fmi);
return 0;
}
static inline int fmi_getsigstr(struct fmi *fmi)
{
int val;
int res;
mutex_lock(&fmi->lock);
val = fmi->mute ? 0x00 : 0x08; /* mute/unmute */
outb(val, fmi->io);
outb(val | 0x10, fmi->io);
msleep(143); /* was schedule_timeout(HZ/7) */
res = (int)inb(fmi->io + 1);
outb(val, fmi->io);
mutex_unlock(&fmi->lock);
return (res & 2) ? 0 : 0xFFFF;
}
static int vidioc_querycap(struct file *file, void *priv,
struct v4l2_capability *v)
{
strlcpy(v->driver, "radio-sf16fmi", sizeof(v->driver));
strlcpy(v->card, "SF16-FMx radio", sizeof(v->card));
strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
v->version = RADIO_VERSION;
v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
return 0;
}
static int vidioc_g_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
struct fmi *fmi = video_drvdata(file);
if (v->index > 0)
return -EINVAL;
strlcpy(v->name, "FM", sizeof(v->name));
v->type = V4L2_TUNER_RADIO;
v->rangelow = RSF16_MINFREQ;
v->rangehigh = RSF16_MAXFREQ;
v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW;
v->audmode = V4L2_TUNER_MODE_STEREO;
v->signal = fmi_getsigstr(fmi);
return 0;
}
static int vidioc_s_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
return v->index ? -EINVAL : 0;
}
static int vidioc_s_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct fmi *fmi = video_drvdata(file);
if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
return -EINVAL;
if (f->frequency < RSF16_MINFREQ ||
f->frequency > RSF16_MAXFREQ)
return -EINVAL;
/* rounding in steps of 800 to match the freq
that will be used */
fmi_setfreq(fmi, (f->frequency / 800) * 800);
return 0;
}
static int vidioc_g_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct fmi *fmi = video_drvdata(file);
if (f->tuner != 0)
return -EINVAL;
f->type = V4L2_TUNER_RADIO;
f->frequency = fmi->curfreq;
return 0;
}
static int vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *qc)
{
switch (qc->id) {
case V4L2_CID_AUDIO_MUTE:
return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
}
return -EINVAL;
}
static int vidioc_g_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct fmi *fmi = video_drvdata(file);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
ctrl->value = fmi->mute;
return 0;
}
return -EINVAL;
}
static int vidioc_s_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct fmi *fmi = video_drvdata(file);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
if (ctrl->value)
fmi_mute(fmi);
else
fmi_unmute(fmi);
fmi->mute = ctrl->value;
return 0;
}
return -EINVAL;
}
static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
{
*i = 0;
return 0;
}
static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
{
return i ? -EINVAL : 0;
}
static int vidioc_g_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
a->index = 0;
strlcpy(a->name, "Radio", sizeof(a->name));
a->capability = V4L2_AUDCAP_STEREO;
return 0;
}
static int vidioc_s_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
return a->index ? -EINVAL : 0;
}
static const struct v4l2_file_operations fmi_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops fmi_ioctl_ops = {
.vidioc_querycap = vidioc_querycap,
.vidioc_g_tuner = vidioc_g_tuner,
.vidioc_s_tuner = vidioc_s_tuner,
.vidioc_g_audio = vidioc_g_audio,
.vidioc_s_audio = vidioc_s_audio,
.vidioc_g_input = vidioc_g_input,
.vidioc_s_input = vidioc_s_input,
.vidioc_g_frequency = vidioc_g_frequency,
.vidioc_s_frequency = vidioc_s_frequency,
.vidioc_queryctrl = vidioc_queryctrl,
.vidioc_g_ctrl = vidioc_g_ctrl,
.vidioc_s_ctrl = vidioc_s_ctrl,
};
/* ladis: this is my card. does any other types exist? */
static struct isapnp_device_id id_table[] __devinitdata = {
{ ISAPNP_ANY_ID, ISAPNP_ANY_ID,
ISAPNP_VENDOR('M','F','R'), ISAPNP_FUNCTION(0xad10), 0},
{ ISAPNP_CARD_END, },
};
MODULE_DEVICE_TABLE(isapnp, id_table);
static int __init isapnp_fmi_probe(void)
{
int i = 0;
while (id_table[i].card_vendor != 0 && dev == NULL) {
dev = pnp_find_dev(NULL, id_table[i].vendor,
id_table[i].function, NULL);
i++;
}
if (!dev)
return -ENODEV;
if (pnp_device_attach(dev) < 0)
return -EAGAIN;
if (pnp_activate_dev(dev) < 0) {
printk(KERN_ERR "radio-sf16fmi: PnP configure failed (out of resources?)\n");
pnp_device_detach(dev);
return -ENOMEM;
}
if (!pnp_port_valid(dev, 0)) {
pnp_device_detach(dev);
return -ENODEV;
}
i = pnp_port_start(dev, 0);
printk(KERN_INFO "radio-sf16fmi: PnP reports card at %#x\n", i);
return i;
}
static int __init fmi_init(void)
{
struct fmi *fmi = &fmi_card;
struct v4l2_device *v4l2_dev = &fmi->v4l2_dev;
int res, i;
int probe_ports[] = { 0, 0x284, 0x384 };
if (io < 0) {
for (i = 0; i < ARRAY_SIZE(probe_ports); i++) {
io = probe_ports[i];
if (io == 0) {
io = isapnp_fmi_probe();
if (io < 0)
continue;
pnp_attached = 1;
}
if (!request_region(io, 2, "radio-sf16fmi")) {
if (pnp_attached)
pnp_device_detach(dev);
io = -1;
continue;
}
if (pnp_attached ||
((inb(io) & 0xf9) == 0xf9 && (inb(io) & 0x4) == 0))
break;
release_region(io, 2);
io = -1;
}
} else {
if (!request_region(io, 2, "radio-sf16fmi")) {
printk(KERN_ERR "radio-sf16fmi: port %#x already in use\n", io);
return -EBUSY;
}
if (inb(io) == 0xff) {
printk(KERN_ERR "radio-sf16fmi: card not present at %#x\n", io);
release_region(io, 2);
return -ENODEV;
}
}
if (io < 0) {
printk(KERN_ERR "radio-sf16fmi: no cards found\n");
return -ENODEV;
}
strlcpy(v4l2_dev->name, "sf16fmi", sizeof(v4l2_dev->name));
fmi->io = io;
res = v4l2_device_register(NULL, v4l2_dev);
if (res < 0) {
release_region(fmi->io, 2);
if (pnp_attached)
pnp_device_detach(dev);
v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
return res;
}
strlcpy(fmi->vdev.name, v4l2_dev->name, sizeof(fmi->vdev.name));
fmi->vdev.v4l2_dev = v4l2_dev;
fmi->vdev.fops = &fmi_fops;
fmi->vdev.ioctl_ops = &fmi_ioctl_ops;
fmi->vdev.release = video_device_release_empty;
video_set_drvdata(&fmi->vdev, fmi);
mutex_init(&fmi->lock);
/* mute card - prevents noisy bootups */
fmi_mute(fmi);
if (video_register_device(&fmi->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(v4l2_dev);
release_region(fmi->io, 2);
if (pnp_attached)
pnp_device_detach(dev);
return -EINVAL;
}
v4l2_info(v4l2_dev, "card driver at 0x%x\n", fmi->io);
return 0;
}
static void __exit fmi_exit(void)
{
struct fmi *fmi = &fmi_card;
video_unregister_device(&fmi->vdev);
v4l2_device_unregister(&fmi->v4l2_dev);
release_region(fmi->io, 2);
if (dev && pnp_attached)
pnp_device_detach(dev);
}
module_init(fmi_init);
module_exit(fmi_exit);