linux_dsm_epyc7002/drivers/ide/pci/generic.c
Bartlomiej Zolnierkiewicz d5271be6b5 drivers/ide/pci/generic: fix build for CONFIG_HOTPLUG=n
It turns out that const and __{dev}initdata cannot be mixed currently
and that generic IDE PCI host driver is also affected by the same issue:

On Thursday 25 October 2007, Ralf Baechle wrote:
>   CC      drivers/ide/pci/generic.o
> drivers/ide/pci/generic.c:52: error: __setup_str_ide_generic_all_on causes a
> +section type conflict

[ Also reported by Martijn Uffing <mp3project@sarijopen.student.utwente.nl>. ]

This patch workarounds the problem in a bit hackish way but without
removing const from generic_chipsets[] (it adds const to __setup() so
__setup_str_ide_generic_all becomes const).

Now all __{dev}initdata data in generic IDE PCI host driver are read-only
so it builds again (driver's .init.data section gets marked as READONLY).

Cc: Martijn Uffing <mp3project@sarijopen.student.utwente.nl>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-26 20:31:15 +02:00

212 lines
6.6 KiB
C

/*
* linux/drivers/ide/pci/generic.c Version 0.11 December 30, 2002
*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* For the avoidance of doubt the "preferred form" of this code is one which
* is in an open non patent encumbered format. Where cryptographic key signing
* forms part of the process of creating an executable the information
* including keys needed to generate an equivalently functional executable
* are deemed to be part of the source code.
*/
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <asm/io.h>
static int ide_generic_all; /* Set to claim all devices */
/*
* the module_param_named() was added for the modular case
* the __setup() is left as compatibility for existing setups
*/
#ifndef MODULE
static int __init ide_generic_all_on(char *unused)
{
ide_generic_all = 1;
printk(KERN_INFO "IDE generic will claim all unknown PCI IDE storage controllers.\n");
return 1;
}
const __setup("all-generic-ide", ide_generic_all_on);
#endif
module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers.");
#define IDE_HFLAGS_UMC (IDE_HFLAG_NO_DMA | IDE_HFLAG_FORCE_LEGACY_IRQS)
#define DECLARE_GENERIC_PCI_DEV(name_str, extra_flags) \
{ \
.name = name_str, \
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | \
extra_flags | \
IDE_HFLAG_BOOTABLE, \
.swdma_mask = ATA_SWDMA2, \
.mwdma_mask = ATA_MWDMA2, \
.udma_mask = ATA_UDMA6, \
}
static const struct ide_port_info generic_chipsets[] __devinitdata = {
/* 0 */ DECLARE_GENERIC_PCI_DEV("Unknown", 0),
{ /* 1 */
.name = "NS87410",
.enablebits = {{0x43,0x08,0x08}, {0x47,0x08,0x08}},
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_BOOTABLE,
.swdma_mask = ATA_SWDMA2,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
},
/* 2 */ DECLARE_GENERIC_PCI_DEV("SAMURAI", 0),
/* 3 */ DECLARE_GENERIC_PCI_DEV("HT6565", 0),
/* 4 */ DECLARE_GENERIC_PCI_DEV("UM8673F", IDE_HFLAGS_UMC),
/* 5 */ DECLARE_GENERIC_PCI_DEV("UM8886A", IDE_HFLAGS_UMC),
/* 6 */ DECLARE_GENERIC_PCI_DEV("UM8886BF", IDE_HFLAGS_UMC),
/* 7 */ DECLARE_GENERIC_PCI_DEV("HINT_IDE", 0),
/* 8 */ DECLARE_GENERIC_PCI_DEV("VIA_IDE", IDE_HFLAG_NO_AUTODMA),
/* 9 */ DECLARE_GENERIC_PCI_DEV("OPTI621V", IDE_HFLAG_NO_AUTODMA),
{ /* 10 */
.name = "VIA8237SATA",
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_OFF_BOARD,
.swdma_mask = ATA_SWDMA2,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
},
/* 11 */ DECLARE_GENERIC_PCI_DEV("Piccolo0102", IDE_HFLAG_NO_AUTODMA),
/* 12 */ DECLARE_GENERIC_PCI_DEV("Piccolo0103", IDE_HFLAG_NO_AUTODMA),
/* 13 */ DECLARE_GENERIC_PCI_DEV("Piccolo0105", IDE_HFLAG_NO_AUTODMA),
{ /* 14 */
.name = "Revolution",
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_OFF_BOARD,
.swdma_mask = ATA_SWDMA2,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
}
};
/**
* generic_init_one - called when a PIIX is found
* @dev: the generic device
* @id: the matching pci id
*
* Called when the PCI registration layer (or the IDE initialization)
* finds a device matching our IDE device tables.
*/
static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
const struct ide_port_info *d = &generic_chipsets[id->driver_data];
int ret = -ENODEV;
/* Don't use the generic entry unless instructed to do so */
if (id->driver_data == 0 && ide_generic_all == 0)
goto out;
switch (dev->vendor) {
case PCI_VENDOR_ID_UMC:
if (dev->device == PCI_DEVICE_ID_UMC_UM8886A &&
!(PCI_FUNC(dev->devfn) & 1))
goto out; /* UM8886A/BF pair */
break;
case PCI_VENDOR_ID_OPTI:
if (dev->device == PCI_DEVICE_ID_OPTI_82C558 &&
!(PCI_FUNC(dev->devfn) & 1))
goto out;
break;
case PCI_VENDOR_ID_JMICRON:
if (dev->device != PCI_DEVICE_ID_JMICRON_JMB368 &&
PCI_FUNC(dev->devfn) != 1)
goto out;
break;
case PCI_VENDOR_ID_NS:
if (dev->device == PCI_DEVICE_ID_NS_87410 &&
(dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
goto out;
break;
}
if (dev->vendor != PCI_VENDOR_ID_JMICRON) {
u16 command;
pci_read_config_word(dev, PCI_COMMAND, &command);
if (!(command & PCI_COMMAND_IO)) {
printk(KERN_INFO "Skipping disabled %s IDE "
"controller.\n", d->name);
goto out;
}
}
ret = ide_setup_pci_device(dev, d);
out:
return ret;
}
static const struct pci_device_id generic_pci_tbl[] = {
{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87410), 1 },
{ PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), 2 },
{ PCI_VDEVICE(HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), 3 },
{ PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8673F), 4 },
{ PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8886A), 5 },
{ PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8886BF), 6 },
{ PCI_VDEVICE(HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), 7 },
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C561), 8 },
{ PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C558), 9 },
#ifdef CONFIG_BLK_DEV_IDE_SATA
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237_SATA), 10 },
#endif
{ PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO), 11 },
{ PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), 12 },
{ PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), 13 },
{ PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), 14 },
/*
* Must come last. If you add entries adjust
* this table and generic_chipsets[] appropriately.
*/
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, generic_pci_tbl);
static struct pci_driver driver = {
.name = "PCI_IDE",
.id_table = generic_pci_tbl,
.probe = generic_init_one,
};
static int __init generic_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
module_init(generic_ide_init);
MODULE_AUTHOR("Andre Hedrick");
MODULE_DESCRIPTION("PCI driver module for generic PCI IDE");
MODULE_LICENSE("GPL");