linux_dsm_epyc7002/drivers/ide/legacy/macide.c
Bartlomiej Zolnierkiewicz c99c92c587 ide: print banner message once per controller in m68k host drivers
* Print banner message once per controller in m68k host drivers.

* Change printk() level to KERN_INFO in buddha, falconide and gayle.

* Add banner message to q40ide.

This is basically a preparation for the future IDE layer changes.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 20:13:09 +01:00

145 lines
3.6 KiB
C

/*
* linux/drivers/ide/legacy/macide.c -- Macintosh IDE Driver
*
* Copyright (C) 1998 by Michael Schmitz
*
* This driver was written based on information obtained from the MacOS IDE
* driver binary by Mikael Forselius
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <asm/machw.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
#include <asm/mac_baboon.h>
#define IDE_BASE 0x50F1A000 /* Base address of IDE controller */
/*
* Generic IDE registers as offsets from the base
* These match MkLinux so they should be correct.
*/
#define IDE_DATA 0x00
#define IDE_ERROR 0x04 /* see err-bits */
#define IDE_NSECTOR 0x08 /* nr of sectors to read/write */
#define IDE_SECTOR 0x0c /* starting sector */
#define IDE_LCYL 0x10 /* starting cylinder */
#define IDE_HCYL 0x14 /* high byte of starting cyl */
#define IDE_SELECT 0x18 /* 101dhhhh , d=drive, hhhh=head */
#define IDE_STATUS 0x1c /* see status-bits */
#define IDE_CONTROL 0x38 /* control/altstatus */
/*
* Mac-specific registers
*/
/*
* this register is odd; it doesn't seem to do much and it's
* not word-aligned like virtually every other hardware register
* on the Mac...
*/
#define IDE_IFR 0x101 /* (0x101) IDE interrupt flags on Quadra:
*
* Bit 0+1: some interrupt flags
* Bit 2+3: some interrupt enable
* Bit 4: ??
* Bit 5: IDE interrupt flag (any hwif)
* Bit 6: maybe IDE interrupt enable (any hwif) ??
* Bit 7: Any interrupt condition
*/
volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR);
static int macide_offsets[IDE_NR_PORTS] = {
IDE_DATA, IDE_ERROR, IDE_NSECTOR, IDE_SECTOR, IDE_LCYL,
IDE_HCYL, IDE_SELECT, IDE_STATUS, IDE_CONTROL
};
int macide_ack_intr(ide_hwif_t* hwif)
{
if (*ide_ifr & 0x20) {
*ide_ifr &= ~0x20;
return 1;
}
return 0;
}
static const char *mac_ide_name[] =
{ "Quadra", "Powerbook", "Powerbook Baboon" };
/*
* Probe for a Macintosh IDE interface
*/
static int __init macide_init(void)
{
hw_regs_t hw;
ide_hwif_t *hwif;
switch (macintosh_config->ide_type) {
case MAC_IDE_QUADRA:
ide_setup_ports(&hw, IDE_BASE, macide_offsets,
0, 0, macide_ack_intr,
// quadra_ide_iops,
IRQ_NUBUS_F);
break;
case MAC_IDE_PB:
ide_setup_ports(&hw, IDE_BASE, macide_offsets,
0, 0, macide_ack_intr,
// macide_pb_iops,
IRQ_NUBUS_C);
break;
case MAC_IDE_BABOON:
ide_setup_ports(&hw, BABOON_BASE, macide_offsets,
0, 0, NULL,
// macide_baboon_iops,
IRQ_BABOON_1);
break;
default:
return -ENODEV;
}
printk(KERN_INFO "ide: Macintosh %s IDE controller\n",
mac_ide_name[macintosh_config->ide_type - 1]);
hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif) {
u8 index = hwif->index;
u8 idx[4] = { index, 0xff, 0xff, 0xff };
ide_init_port_data(hwif, index);
ide_init_port_hw(hwif, &hw);
if (macintosh_config->ide_type == MAC_IDE_BABOON &&
macintosh_config->ident == MAC_MODEL_PB190) {
/* Fix breakage in ide-disk.c: drive capacity */
/* is not initialized for drives without a */
/* hardware ID, and we can't get that without */
/* probing the drive which freezes a 190. */
ide_drive_t *drive = &hwif->drives[0];
drive->capacity64 = drive->cyl*drive->head*drive->sect;
}
hwif->mmio = 1;
ide_device_add(idx);
}
return 0;
}
module_init(macide_init);