mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 03:15:23 +07:00
85d49eb130
Add the SPDX header to the Intel TH documentation. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
125 lines
4.7 KiB
ReStructuredText
125 lines
4.7 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
=======================
|
|
Intel(R) Trace Hub (TH)
|
|
=======================
|
|
|
|
Overview
|
|
--------
|
|
|
|
Intel(R) Trace Hub (TH) is a set of hardware blocks that produce,
|
|
switch and output trace data from multiple hardware and software
|
|
sources over several types of trace output ports encoded in System
|
|
Trace Protocol (MIPI STPv2) and is intended to perform full system
|
|
debugging. For more information on the hardware, see Intel(R) Trace
|
|
Hub developer's manual [1].
|
|
|
|
It consists of trace sources, trace destinations (outputs) and a
|
|
switch (Global Trace Hub, GTH). These devices are placed on a bus of
|
|
their own ("intel_th"), where they can be discovered and configured
|
|
via sysfs attributes.
|
|
|
|
Currently, the following Intel TH subdevices (blocks) are supported:
|
|
- Software Trace Hub (STH), trace source, which is a System Trace
|
|
Module (STM) device,
|
|
- Memory Storage Unit (MSU), trace output, which allows storing
|
|
trace hub output in system memory,
|
|
- Parallel Trace Interface output (PTI), trace output to an external
|
|
debug host via a PTI port,
|
|
- Global Trace Hub (GTH), which is a switch and a central component
|
|
of Intel(R) Trace Hub architecture.
|
|
|
|
Common attributes for output devices are described in
|
|
Documentation/ABI/testing/sysfs-bus-intel_th-output-devices, the most
|
|
notable of them is "active", which enables or disables trace output
|
|
into that particular output device.
|
|
|
|
GTH allows directing different STP masters into different output ports
|
|
via its "masters" attribute group. More detailed GTH interface
|
|
description is at Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth.
|
|
|
|
STH registers an stm class device, through which it provides interface
|
|
to userspace and kernelspace software trace sources. See
|
|
Documentation/trace/stm.rst for more information on that.
|
|
|
|
MSU can be configured to collect trace data into a system memory
|
|
buffer, which can later on be read from its device nodes via read() or
|
|
mmap() interface.
|
|
|
|
On the whole, Intel(R) Trace Hub does not require any special
|
|
userspace software to function; everything can be configured, started
|
|
and collected via sysfs attributes, and device nodes.
|
|
|
|
[1] https://software.intel.com/sites/default/files/managed/d3/3c/intel-th-developer-manual.pdf
|
|
|
|
Bus and Subdevices
|
|
------------------
|
|
|
|
For each Intel TH device in the system a bus of its own is
|
|
created and assigned an id number that reflects the order in which TH
|
|
devices were emumerated. All TH subdevices (devices on intel_th bus)
|
|
begin with this id: 0-gth, 0-msc0, 0-msc1, 0-pti, 0-sth, which is
|
|
followed by device's name and an optional index.
|
|
|
|
Output devices also get a device node in /dev/intel_thN, where N is
|
|
the Intel TH device id. For example, MSU's memory buffers, when
|
|
allocated, are accessible via /dev/intel_th0/msc{0,1}.
|
|
|
|
Quick example
|
|
-------------
|
|
|
|
# figure out which GTH port is the first memory controller::
|
|
|
|
$ cat /sys/bus/intel_th/devices/0-msc0/port
|
|
0
|
|
|
|
# looks like it's port 0, configure master 33 to send data to port 0::
|
|
|
|
$ echo 0 > /sys/bus/intel_th/devices/0-gth/masters/33
|
|
|
|
# allocate a 2-windowed multiblock buffer on the first memory
|
|
# controller, each with 64 pages::
|
|
|
|
$ echo multi > /sys/bus/intel_th/devices/0-msc0/mode
|
|
$ echo 64,64 > /sys/bus/intel_th/devices/0-msc0/nr_pages
|
|
|
|
# enable wrapping for this controller, too::
|
|
|
|
$ echo 1 > /sys/bus/intel_th/devices/0-msc0/wrap
|
|
|
|
# and enable tracing into this port::
|
|
|
|
$ echo 1 > /sys/bus/intel_th/devices/0-msc0/active
|
|
|
|
# .. send data to master 33, see stm.txt for more details ..
|
|
# .. wait for traces to pile up ..
|
|
# .. and stop the trace::
|
|
|
|
$ echo 0 > /sys/bus/intel_th/devices/0-msc0/active
|
|
|
|
# and now you can collect the trace from the device node::
|
|
|
|
$ cat /dev/intel_th0/msc0 > my_stp_trace
|
|
|
|
Host Debugger Mode
|
|
------------------
|
|
|
|
It is possible to configure the Trace Hub and control its trace
|
|
capture from a remote debug host, which should be connected via one of
|
|
the hardware debugging interfaces, which will then be used to both
|
|
control Intel Trace Hub and transfer its trace data to the debug host.
|
|
|
|
The driver needs to be told that such an arrangement is taking place
|
|
so that it does not touch any capture/port configuration and avoids
|
|
conflicting with the debug host's configuration accesses. The only
|
|
activity that the driver will perform in this mode is collecting
|
|
software traces to the Software Trace Hub (an stm class device). The
|
|
user is still responsible for setting up adequate master/channel
|
|
mappings that the decoder on the receiving end would recognize.
|
|
|
|
In order to enable the host mode, set the 'host_mode' parameter of the
|
|
'intel_th' kernel module to 'y'. None of the virtual output devices
|
|
will show up on the intel_th bus. Also, trace configuration and
|
|
capture controlling attribute groups of the 'gth' device will not be
|
|
exposed. The 'sth' device will operate as usual.
|