linux_dsm_epyc7002/net/tipc/core.c
Jon Paul Maloy 10724cc7bb tipc: redesign connection-level flow control
There are two flow control mechanisms in TIPC; one at link level that
handles network congestion, burst control, and retransmission, and one
at connection level which' only remaining task is to prevent overflow
in the receiving socket buffer. In TIPC, the latter task has to be
solved end-to-end because messages can not be thrown away once they
have been accepted and delivered upwards from the link layer, i.e, we
can never permit the receive buffer to overflow.

Currently, this algorithm is message based. A counter in the receiving
socket keeps track of number of consumed messages, and sends a dedicated
acknowledge message back to the sender for each 256 consumed message.
A counter at the sending end keeps track of the sent, not yet
acknowledged messages, and blocks the sender if this number ever reaches
512 unacknowledged messages. When the missing acknowledge arrives, the
socket is then woken up for renewed transmission. This works well for
keeping the message flow running, as it almost never happens that a
sender socket is blocked this way.

A problem with the current mechanism is that it potentially is very
memory consuming. Since we don't distinguish between small and large
messages, we have to dimension the socket receive buffer according
to a worst-case of both. I.e., the window size must be chosen large
enough to sustain a reasonable throughput even for the smallest
messages, while we must still consider a scenario where all messages
are of maximum size. Hence, the current fix window size of 512 messages
and a maximum message size of 66k results in a receive buffer of 66 MB
when truesize(66k) = 131k is taken into account. It is possible to do
much better.

This commit introduces an algorithm where we instead use 1024-byte
blocks as base unit. This unit, always rounded upwards from the
actual message size, is used when we advertise windows as well as when
we count and acknowledge transmitted data. The advertised window is
based on the configured receive buffer size in such a way that even
the worst-case truesize/msgsize ratio always is covered. Since the
smallest possible message size (from a flow control viewpoint) now is
1024 bytes, we can safely assume this ratio to be less than four, which
is the value we are now using.

This way, we have been able to reduce the default receive buffer size
from 66 MB to 2 MB with maintained performance.

In order to keep this solution backwards compatible, we introduce a
new capability bit in the discovery protocol, and use this throughout
the message sending/reception path to always select the right unit.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03 15:51:16 -04:00

178 lines
4.5 KiB
C

/*
* net/tipc/core.c: TIPC module code
*
* Copyright (c) 2003-2006, 2013, Ericsson AB
* Copyright (c) 2005-2006, 2010-2013, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include "core.h"
#include "name_table.h"
#include "subscr.h"
#include "bearer.h"
#include "net.h"
#include "socket.h"
#include "bcast.h"
#include <linux/module.h>
/* configurable TIPC parameters */
int tipc_net_id __read_mostly;
int sysctl_tipc_rmem[3] __read_mostly; /* min/default/max */
static int __net_init tipc_init_net(struct net *net)
{
struct tipc_net *tn = net_generic(net, tipc_net_id);
int err;
tn->net_id = 4711;
tn->own_addr = 0;
get_random_bytes(&tn->random, sizeof(int));
INIT_LIST_HEAD(&tn->node_list);
spin_lock_init(&tn->node_list_lock);
err = tipc_sk_rht_init(net);
if (err)
goto out_sk_rht;
err = tipc_nametbl_init(net);
if (err)
goto out_nametbl;
INIT_LIST_HEAD(&tn->dist_queue);
err = tipc_topsrv_start(net);
if (err)
goto out_subscr;
err = tipc_bcast_init(net);
if (err)
goto out_bclink;
return 0;
out_bclink:
tipc_bcast_stop(net);
out_subscr:
tipc_nametbl_stop(net);
out_nametbl:
tipc_sk_rht_destroy(net);
out_sk_rht:
return err;
}
static void __net_exit tipc_exit_net(struct net *net)
{
tipc_topsrv_stop(net);
tipc_net_stop(net);
tipc_bcast_stop(net);
tipc_nametbl_stop(net);
tipc_sk_rht_destroy(net);
}
static struct pernet_operations tipc_net_ops = {
.init = tipc_init_net,
.exit = tipc_exit_net,
.id = &tipc_net_id,
.size = sizeof(struct tipc_net),
};
static int __init tipc_init(void)
{
int err;
pr_info("Activated (version " TIPC_MOD_VER ")\n");
sysctl_tipc_rmem[0] = RCVBUF_MIN;
sysctl_tipc_rmem[1] = RCVBUF_DEF;
sysctl_tipc_rmem[2] = RCVBUF_MAX;
err = tipc_netlink_start();
if (err)
goto out_netlink;
err = tipc_netlink_compat_start();
if (err)
goto out_netlink_compat;
err = tipc_socket_init();
if (err)
goto out_socket;
err = tipc_register_sysctl();
if (err)
goto out_sysctl;
err = register_pernet_subsys(&tipc_net_ops);
if (err)
goto out_pernet;
err = tipc_bearer_setup();
if (err)
goto out_bearer;
pr_info("Started in single node mode\n");
return 0;
out_bearer:
unregister_pernet_subsys(&tipc_net_ops);
out_pernet:
tipc_unregister_sysctl();
out_sysctl:
tipc_socket_stop();
out_socket:
tipc_netlink_compat_stop();
out_netlink_compat:
tipc_netlink_stop();
out_netlink:
pr_err("Unable to start in single node mode\n");
return err;
}
static void __exit tipc_exit(void)
{
tipc_bearer_cleanup();
unregister_pernet_subsys(&tipc_net_ops);
tipc_netlink_stop();
tipc_netlink_compat_stop();
tipc_socket_stop();
tipc_unregister_sysctl();
pr_info("Deactivated\n");
}
module_init(tipc_init);
module_exit(tipc_exit);
MODULE_DESCRIPTION("TIPC: Transparent Inter Process Communication");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(TIPC_MOD_VER);