linux_dsm_epyc7002/drivers/net/wireless/ti/wl1251/event.h
David Gnedt f7ad1eed4d wl1251: retry power save entry
Port of the power save entry retry code from wl1251 driver version included
in the Maemo Fremantle kernel.
This tries to enable power save mode up to 3 times before failing.

Signed-off-by: David Gnedt <david.gnedt@davizone.at>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-09 10:53:38 -05:00

128 lines
4.0 KiB
C

/*
* This file is part of wl1251
*
* Copyright (c) 1998-2007 Texas Instruments Incorporated
* Copyright (C) 2008 Nokia Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#ifndef __WL1251_EVENT_H__
#define __WL1251_EVENT_H__
/*
* Mbox events
*
* The event mechanism is based on a pair of event buffers (buffers A and
* B) at fixed locations in the target's memory. The host processes one
* buffer while the other buffer continues to collect events. If the host
* is not processing events, an interrupt is issued to signal that a buffer
* is ready. Once the host is done with processing events from one buffer,
* it signals the target (with an ACK interrupt) that the event buffer is
* free.
*/
enum {
RESERVED1_EVENT_ID = BIT(0),
RESERVED2_EVENT_ID = BIT(1),
MEASUREMENT_START_EVENT_ID = BIT(2),
SCAN_COMPLETE_EVENT_ID = BIT(3),
CALIBRATION_COMPLETE_EVENT_ID = BIT(4),
ROAMING_TRIGGER_LOW_RSSI_EVENT_ID = BIT(5),
PS_REPORT_EVENT_ID = BIT(6),
SYNCHRONIZATION_TIMEOUT_EVENT_ID = BIT(7),
HEALTH_REPORT_EVENT_ID = BIT(8),
ACI_DETECTION_EVENT_ID = BIT(9),
DEBUG_REPORT_EVENT_ID = BIT(10),
MAC_STATUS_EVENT_ID = BIT(11),
DISCONNECT_EVENT_COMPLETE_ID = BIT(12),
JOIN_EVENT_COMPLETE_ID = BIT(13),
CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(14),
BSS_LOSE_EVENT_ID = BIT(15),
ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID = BIT(16),
MEASUREMENT_COMPLETE_EVENT_ID = BIT(17),
AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(18),
SCHEDULED_SCAN_COMPLETE_EVENT_ID = BIT(19),
PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(20),
RESET_BSS_EVENT_ID = BIT(21),
REGAINED_BSS_EVENT_ID = BIT(22),
ROAMING_TRIGGER_REGAINED_RSSI_EVENT_ID = BIT(23),
ROAMING_TRIGGER_LOW_SNR_EVENT_ID = BIT(24),
ROAMING_TRIGGER_REGAINED_SNR_EVENT_ID = BIT(25),
DBG_EVENT_ID = BIT(26),
BT_PTA_SENSE_EVENT_ID = BIT(27),
BT_PTA_PREDICTION_EVENT_ID = BIT(28),
BT_PTA_AVALANCHE_EVENT_ID = BIT(29),
PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(30),
EVENT_MBOX_ALL_EVENT_ID = 0x7fffffff,
};
struct event_debug_report {
u8 debug_event_id;
u8 num_params;
u16 pad;
u32 report_1;
u32 report_2;
u32 report_3;
} __packed;
struct event_mailbox {
u32 events_vector;
u32 events_mask;
u32 reserved_1;
u32 reserved_2;
char average_rssi_level;
u8 ps_status;
u8 channel_switch_status;
u8 scheduled_scan_status;
/* Channels scanned by the scheduled scan */
u16 scheduled_scan_channels;
/* If bit 0 is set -> target's fatal error */
u16 health_report;
u16 bad_fft_counter;
u8 bt_pta_sense_info;
u8 bt_pta_protective_info;
u32 reserved;
u32 debug_report[2];
/* Number of FCS errors since last event */
u32 fcs_err_counter;
struct event_debug_report report;
u8 average_snr_level;
u8 padding[19];
} __packed;
enum {
EVENT_ENTER_POWER_SAVE_FAIL = 0,
EVENT_ENTER_POWER_SAVE_SUCCESS,
EVENT_EXIT_POWER_SAVE_FAIL,
EVENT_EXIT_POWER_SAVE_SUCCESS,
};
int wl1251_event_unmask(struct wl1251 *wl);
void wl1251_event_mbox_config(struct wl1251 *wl);
int wl1251_event_handle(struct wl1251 *wl, u8 mbox);
int wl1251_event_wait(struct wl1251 *wl, u32 mask, int timeout_ms);
#endif