mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 13:45:13 +07:00
7a71712293
dmesg reports that "Your touchpad (PNP: SYN3052 SYN0100 SYN0002 PNP0f13) says it can support a different bus." I've tested the offered psmouse.synaptics_intertouch=1 with 4.18.x and 4.19.x and it seems to work well. No problems seen with suspend/resume. Also, it appears that RMI/SMBus mode is actually required for 3-4 finger multitouch gestures to work -- otherwise they are not reported at all. Information from dmesg in both modes: psmouse serio3: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3139, fw id: 2000742 psmouse serio3: synaptics: Trying to set up SMBus access rmi4_smbus 6-002c: registering SMbus-connected sensor rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3139-001, fw id: 2000742 Signed-off-by: Mantas Mikulėnas <grawity@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
1893 lines
49 KiB
C
1893 lines
49 KiB
C
/*
|
|
* Synaptics TouchPad PS/2 mouse driver
|
|
*
|
|
* 2003 Dmitry Torokhov <dtor@mail.ru>
|
|
* Added support for pass-through port. Special thanks to Peter Berg Larsen
|
|
* for explaining various Synaptics quirks.
|
|
*
|
|
* 2003 Peter Osterlund <petero2@telia.com>
|
|
* Ported to 2.5 input device infrastructure.
|
|
*
|
|
* Copyright (C) 2001 Stefan Gmeiner <riddlebox@freesurf.ch>
|
|
* start merging tpconfig and gpm code to a xfree-input module
|
|
* adding some changes and extensions (ex. 3rd and 4th button)
|
|
*
|
|
* Copyright (c) 1997 C. Scott Ananian <cananian@alumni.priceton.edu>
|
|
* Copyright (c) 1998-2000 Bruce Kalk <kall@compass.com>
|
|
* code for the special synaptics commands (from the tpconfig-source)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
* Trademarks are the property of their respective owners.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/serio.h>
|
|
#include <linux/libps2.h>
|
|
#include <linux/rmi.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include "psmouse.h"
|
|
#include "synaptics.h"
|
|
|
|
/*
|
|
* The x/y limits are taken from the Synaptics TouchPad interfacing Guide,
|
|
* section 2.3.2, which says that they should be valid regardless of the
|
|
* actual size of the sensor.
|
|
* Note that newer firmware allows querying device for maximum useable
|
|
* coordinates.
|
|
*/
|
|
#define XMIN 0
|
|
#define XMAX 6143
|
|
#define YMIN 0
|
|
#define YMAX 6143
|
|
#define XMIN_NOMINAL 1472
|
|
#define XMAX_NOMINAL 5472
|
|
#define YMIN_NOMINAL 1408
|
|
#define YMAX_NOMINAL 4448
|
|
|
|
/* Size in bits of absolute position values reported by the hardware */
|
|
#define ABS_POS_BITS 13
|
|
|
|
/*
|
|
* These values should represent the absolute maximum value that will
|
|
* be reported for a positive position value. Some Synaptics firmware
|
|
* uses this value to indicate a finger near the edge of the touchpad
|
|
* whose precise position cannot be determined.
|
|
*
|
|
* At least one touchpad is known to report positions in excess of this
|
|
* value which are actually negative values truncated to the 13-bit
|
|
* reporting range. These values have never been observed to be lower
|
|
* than 8184 (i.e. -8), so we treat all values greater than 8176 as
|
|
* negative and any other value as positive.
|
|
*/
|
|
#define X_MAX_POSITIVE 8176
|
|
#define Y_MAX_POSITIVE 8176
|
|
|
|
/* maximum ABS_MT_POSITION displacement (in mm) */
|
|
#define DMAX 10
|
|
|
|
/*****************************************************************************
|
|
* Stuff we need even when we do not want native Synaptics support
|
|
****************************************************************************/
|
|
|
|
/*
|
|
* Set the synaptics touchpad mode byte by special commands
|
|
*/
|
|
static int synaptics_mode_cmd(struct psmouse *psmouse, u8 mode)
|
|
{
|
|
u8 param[1];
|
|
int error;
|
|
|
|
error = ps2_sliced_command(&psmouse->ps2dev, mode);
|
|
if (error)
|
|
return error;
|
|
|
|
param[0] = SYN_PS_SET_MODE2;
|
|
error = ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_SETRATE);
|
|
if (error)
|
|
return error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int synaptics_detect(struct psmouse *psmouse, bool set_properties)
|
|
{
|
|
struct ps2dev *ps2dev = &psmouse->ps2dev;
|
|
u8 param[4] = { 0 };
|
|
|
|
ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES);
|
|
ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES);
|
|
ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES);
|
|
ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES);
|
|
ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO);
|
|
|
|
if (param[1] != 0x47)
|
|
return -ENODEV;
|
|
|
|
if (set_properties) {
|
|
psmouse->vendor = "Synaptics";
|
|
psmouse->name = "TouchPad";
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void synaptics_reset(struct psmouse *psmouse)
|
|
{
|
|
/* reset touchpad back to relative mode, gestures enabled */
|
|
synaptics_mode_cmd(psmouse, 0);
|
|
}
|
|
|
|
#if defined(CONFIG_MOUSE_PS2_SYNAPTICS) || \
|
|
defined(CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS)
|
|
|
|
/* This list has been kindly provided by Synaptics. */
|
|
static const char * const topbuttonpad_pnp_ids[] = {
|
|
"LEN0017",
|
|
"LEN0018",
|
|
"LEN0019",
|
|
"LEN0023",
|
|
"LEN002A",
|
|
"LEN002B",
|
|
"LEN002C",
|
|
"LEN002D",
|
|
"LEN002E",
|
|
"LEN0033", /* Helix */
|
|
"LEN0034", /* T431s, L440, L540, T540, W540, X1 Carbon 2nd */
|
|
"LEN0035", /* X240 */
|
|
"LEN0036", /* T440 */
|
|
"LEN0037", /* X1 Carbon 2nd */
|
|
"LEN0038",
|
|
"LEN0039", /* T440s */
|
|
"LEN0041",
|
|
"LEN0042", /* Yoga */
|
|
"LEN0045",
|
|
"LEN0047",
|
|
"LEN0049",
|
|
"LEN2000", /* S540 */
|
|
"LEN2001", /* Edge E431 */
|
|
"LEN2002", /* Edge E531 */
|
|
"LEN2003",
|
|
"LEN2004", /* L440 */
|
|
"LEN2005",
|
|
"LEN2006", /* Edge E440/E540 */
|
|
"LEN2007",
|
|
"LEN2008",
|
|
"LEN2009",
|
|
"LEN200A",
|
|
"LEN200B",
|
|
NULL
|
|
};
|
|
|
|
static const char * const smbus_pnp_ids[] = {
|
|
/* all of the topbuttonpad_pnp_ids are valid, we just add some extras */
|
|
"LEN0048", /* X1 Carbon 3 */
|
|
"LEN0046", /* X250 */
|
|
"LEN004a", /* W541 */
|
|
"LEN005b", /* P50 */
|
|
"LEN005e", /* T560 */
|
|
"LEN0071", /* T480 */
|
|
"LEN0072", /* X1 Carbon Gen 5 (2017) - Elan/ALPS trackpoint */
|
|
"LEN0073", /* X1 Carbon G5 (Elantech) */
|
|
"LEN0092", /* X1 Carbon 6 */
|
|
"LEN0096", /* X280 */
|
|
"LEN0097", /* X280 -> ALPS trackpoint */
|
|
"LEN200f", /* T450s */
|
|
"SYN3052", /* HP EliteBook 840 G4 */
|
|
"SYN3221", /* HP 15-ay000 */
|
|
NULL
|
|
};
|
|
|
|
static const char * const forcepad_pnp_ids[] = {
|
|
"SYN300D",
|
|
"SYN3014",
|
|
NULL
|
|
};
|
|
|
|
/*
|
|
* Send a command to the synpatics touchpad by special commands
|
|
*/
|
|
static int synaptics_send_cmd(struct psmouse *psmouse, u8 cmd, u8 *param)
|
|
{
|
|
int error;
|
|
|
|
error = ps2_sliced_command(&psmouse->ps2dev, cmd);
|
|
if (error)
|
|
return error;
|
|
|
|
error = ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO);
|
|
if (error)
|
|
return error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int synaptics_query_int(struct psmouse *psmouse, u8 query_cmd, u32 *val)
|
|
{
|
|
int error;
|
|
union {
|
|
__be32 be_val;
|
|
char buf[4];
|
|
} resp = { 0 };
|
|
|
|
error = synaptics_send_cmd(psmouse, query_cmd, resp.buf + 1);
|
|
if (error)
|
|
return error;
|
|
|
|
*val = be32_to_cpu(resp.be_val);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Identify Touchpad
|
|
* See also the SYN_ID_* macros
|
|
*/
|
|
static int synaptics_identify(struct psmouse *psmouse,
|
|
struct synaptics_device_info *info)
|
|
{
|
|
int error;
|
|
|
|
error = synaptics_query_int(psmouse, SYN_QUE_IDENTIFY, &info->identity);
|
|
if (error)
|
|
return error;
|
|
|
|
return SYN_ID_IS_SYNAPTICS(info->identity) ? 0 : -ENXIO;
|
|
}
|
|
|
|
/*
|
|
* Read the model-id bytes from the touchpad
|
|
* see also SYN_MODEL_* macros
|
|
*/
|
|
static int synaptics_model_id(struct psmouse *psmouse,
|
|
struct synaptics_device_info *info)
|
|
{
|
|
return synaptics_query_int(psmouse, SYN_QUE_MODEL, &info->model_id);
|
|
}
|
|
|
|
/*
|
|
* Read the firmware id from the touchpad
|
|
*/
|
|
static int synaptics_firmware_id(struct psmouse *psmouse,
|
|
struct synaptics_device_info *info)
|
|
{
|
|
return synaptics_query_int(psmouse, SYN_QUE_FIRMWARE_ID,
|
|
&info->firmware_id);
|
|
}
|
|
|
|
/*
|
|
* Read the board id and the "More Extended Queries" from the touchpad
|
|
* The board id is encoded in the "QUERY MODES" response
|
|
*/
|
|
static int synaptics_query_modes(struct psmouse *psmouse,
|
|
struct synaptics_device_info *info)
|
|
{
|
|
u8 bid[3];
|
|
int error;
|
|
|
|
/* firmwares prior 7.5 have no board_id encoded */
|
|
if (SYN_ID_FULL(info->identity) < 0x705)
|
|
return 0;
|
|
|
|
error = synaptics_send_cmd(psmouse, SYN_QUE_MODES, bid);
|
|
if (error)
|
|
return error;
|
|
|
|
info->board_id = ((bid[0] & 0xfc) << 6) | bid[1];
|
|
|
|
if (SYN_MEXT_CAP_BIT(bid[0]))
|
|
return synaptics_query_int(psmouse, SYN_QUE_MEXT_CAPAB_10,
|
|
&info->ext_cap_10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Read the capability-bits from the touchpad
|
|
* see also the SYN_CAP_* macros
|
|
*/
|
|
static int synaptics_capability(struct psmouse *psmouse,
|
|
struct synaptics_device_info *info)
|
|
{
|
|
int error;
|
|
|
|
error = synaptics_query_int(psmouse, SYN_QUE_CAPABILITIES,
|
|
&info->capabilities);
|
|
if (error)
|
|
return error;
|
|
|
|
info->ext_cap = info->ext_cap_0c = 0;
|
|
|
|
/*
|
|
* Older firmwares had submodel ID fixed to 0x47
|
|
*/
|
|
if (SYN_ID_FULL(info->identity) < 0x705 &&
|
|
SYN_CAP_SUBMODEL_ID(info->capabilities) != 0x47) {
|
|
return -ENXIO;
|
|
}
|
|
|
|
/*
|
|
* Unless capExtended is set the rest of the flags should be ignored
|
|
*/
|
|
if (!SYN_CAP_EXTENDED(info->capabilities))
|
|
info->capabilities = 0;
|
|
|
|
if (SYN_EXT_CAP_REQUESTS(info->capabilities) >= 1) {
|
|
error = synaptics_query_int(psmouse, SYN_QUE_EXT_CAPAB,
|
|
&info->ext_cap);
|
|
if (error) {
|
|
psmouse_warn(psmouse,
|
|
"device claims to have extended capabilities, but I'm not able to read them.\n");
|
|
} else {
|
|
/*
|
|
* if nExtBtn is greater than 8 it should be considered
|
|
* invalid and treated as 0
|
|
*/
|
|
if (SYN_CAP_MULTI_BUTTON_NO(info->ext_cap) > 8)
|
|
info->ext_cap &= ~SYN_CAP_MB_MASK;
|
|
}
|
|
}
|
|
|
|
if (SYN_EXT_CAP_REQUESTS(info->capabilities) >= 4) {
|
|
error = synaptics_query_int(psmouse, SYN_QUE_EXT_CAPAB_0C,
|
|
&info->ext_cap_0c);
|
|
if (error)
|
|
psmouse_warn(psmouse,
|
|
"device claims to have extended capability 0x0c, but I'm not able to read it.\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Read touchpad resolution and maximum reported coordinates
|
|
* Resolution is left zero if touchpad does not support the query
|
|
*/
|
|
static int synaptics_resolution(struct psmouse *psmouse,
|
|
struct synaptics_device_info *info)
|
|
{
|
|
u8 resp[3];
|
|
int error;
|
|
|
|
if (SYN_ID_MAJOR(info->identity) < 4)
|
|
return 0;
|
|
|
|
error = synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, resp);
|
|
if (!error) {
|
|
if (resp[0] != 0 && (resp[1] & 0x80) && resp[2] != 0) {
|
|
info->x_res = resp[0]; /* x resolution in units/mm */
|
|
info->y_res = resp[2]; /* y resolution in units/mm */
|
|
}
|
|
}
|
|
|
|
if (SYN_EXT_CAP_REQUESTS(info->capabilities) >= 5 &&
|
|
SYN_CAP_MAX_DIMENSIONS(info->ext_cap_0c)) {
|
|
error = synaptics_send_cmd(psmouse,
|
|
SYN_QUE_EXT_MAX_COORDS, resp);
|
|
if (error) {
|
|
psmouse_warn(psmouse,
|
|
"device claims to have max coordinates query, but I'm not able to read it.\n");
|
|
} else {
|
|
info->x_max = (resp[0] << 5) | ((resp[1] & 0x0f) << 1);
|
|
info->y_max = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3);
|
|
psmouse_info(psmouse,
|
|
"queried max coordinates: x [..%d], y [..%d]\n",
|
|
info->x_max, info->y_max);
|
|
}
|
|
}
|
|
|
|
if (SYN_CAP_MIN_DIMENSIONS(info->ext_cap_0c) &&
|
|
(SYN_EXT_CAP_REQUESTS(info->capabilities) >= 7 ||
|
|
/*
|
|
* Firmware v8.1 does not report proper number of extended
|
|
* capabilities, but has been proven to report correct min
|
|
* coordinates.
|
|
*/
|
|
SYN_ID_FULL(info->identity) == 0x801)) {
|
|
error = synaptics_send_cmd(psmouse,
|
|
SYN_QUE_EXT_MIN_COORDS, resp);
|
|
if (error) {
|
|
psmouse_warn(psmouse,
|
|
"device claims to have min coordinates query, but I'm not able to read it.\n");
|
|
} else {
|
|
info->x_min = (resp[0] << 5) | ((resp[1] & 0x0f) << 1);
|
|
info->y_min = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3);
|
|
psmouse_info(psmouse,
|
|
"queried min coordinates: x [%d..], y [%d..]\n",
|
|
info->x_min, info->y_min);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int synaptics_query_hardware(struct psmouse *psmouse,
|
|
struct synaptics_device_info *info)
|
|
{
|
|
int error;
|
|
|
|
memset(info, 0, sizeof(*info));
|
|
|
|
error = synaptics_identify(psmouse, info);
|
|
if (error)
|
|
return error;
|
|
|
|
error = synaptics_model_id(psmouse, info);
|
|
if (error)
|
|
return error;
|
|
|
|
error = synaptics_firmware_id(psmouse, info);
|
|
if (error)
|
|
return error;
|
|
|
|
error = synaptics_query_modes(psmouse, info);
|
|
if (error)
|
|
return error;
|
|
|
|
error = synaptics_capability(psmouse, info);
|
|
if (error)
|
|
return error;
|
|
|
|
error = synaptics_resolution(psmouse, info);
|
|
if (error)
|
|
return error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_MOUSE_PS2_SYNAPTICS || CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS */
|
|
|
|
#ifdef CONFIG_MOUSE_PS2_SYNAPTICS
|
|
|
|
static bool cr48_profile_sensor;
|
|
|
|
#define ANY_BOARD_ID 0
|
|
struct min_max_quirk {
|
|
const char * const *pnp_ids;
|
|
struct {
|
|
u32 min, max;
|
|
} board_id;
|
|
u32 x_min, x_max, y_min, y_max;
|
|
};
|
|
|
|
static const struct min_max_quirk min_max_pnpid_table[] = {
|
|
{
|
|
(const char * const []){"LEN0033", NULL},
|
|
{ANY_BOARD_ID, ANY_BOARD_ID},
|
|
1024, 5052, 2258, 4832
|
|
},
|
|
{
|
|
(const char * const []){"LEN0042", NULL},
|
|
{ANY_BOARD_ID, ANY_BOARD_ID},
|
|
1232, 5710, 1156, 4696
|
|
},
|
|
{
|
|
(const char * const []){"LEN0034", "LEN0036", "LEN0037",
|
|
"LEN0039", "LEN2002", "LEN2004",
|
|
NULL},
|
|
{ANY_BOARD_ID, 2961},
|
|
1024, 5112, 2024, 4832
|
|
},
|
|
{
|
|
(const char * const []){"LEN2000", NULL},
|
|
{ANY_BOARD_ID, ANY_BOARD_ID},
|
|
1024, 5113, 2021, 4832
|
|
},
|
|
{
|
|
(const char * const []){"LEN2001", NULL},
|
|
{ANY_BOARD_ID, ANY_BOARD_ID},
|
|
1024, 5022, 2508, 4832
|
|
},
|
|
{
|
|
(const char * const []){"LEN2006", NULL},
|
|
{2691, 2691},
|
|
1024, 5045, 2457, 4832
|
|
},
|
|
{
|
|
(const char * const []){"LEN2006", NULL},
|
|
{ANY_BOARD_ID, ANY_BOARD_ID},
|
|
1264, 5675, 1171, 4688
|
|
},
|
|
{ }
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* Synaptics communications functions
|
|
****************************************************************************/
|
|
|
|
/*
|
|
* Synaptics touchpads report the y coordinate from bottom to top, which is
|
|
* opposite from what userspace expects.
|
|
* This function is used to invert y before reporting.
|
|
*/
|
|
static int synaptics_invert_y(int y)
|
|
{
|
|
return YMAX_NOMINAL + YMIN_NOMINAL - y;
|
|
}
|
|
|
|
/*
|
|
* Apply quirk(s) if the hardware matches
|
|
*/
|
|
static void synaptics_apply_quirks(struct psmouse *psmouse,
|
|
struct synaptics_device_info *info)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; min_max_pnpid_table[i].pnp_ids; i++) {
|
|
if (!psmouse_matches_pnp_id(psmouse,
|
|
min_max_pnpid_table[i].pnp_ids))
|
|
continue;
|
|
|
|
if (min_max_pnpid_table[i].board_id.min != ANY_BOARD_ID &&
|
|
info->board_id < min_max_pnpid_table[i].board_id.min)
|
|
continue;
|
|
|
|
if (min_max_pnpid_table[i].board_id.max != ANY_BOARD_ID &&
|
|
info->board_id > min_max_pnpid_table[i].board_id.max)
|
|
continue;
|
|
|
|
info->x_min = min_max_pnpid_table[i].x_min;
|
|
info->x_max = min_max_pnpid_table[i].x_max;
|
|
info->y_min = min_max_pnpid_table[i].y_min;
|
|
info->y_max = min_max_pnpid_table[i].y_max;
|
|
psmouse_info(psmouse,
|
|
"quirked min/max coordinates: x [%d..%d], y [%d..%d]\n",
|
|
info->x_min, info->x_max,
|
|
info->y_min, info->y_max);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static bool synaptics_has_agm(struct synaptics_data *priv)
|
|
{
|
|
return (SYN_CAP_ADV_GESTURE(priv->info.ext_cap_0c) ||
|
|
SYN_CAP_IMAGE_SENSOR(priv->info.ext_cap_0c));
|
|
}
|
|
|
|
static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse)
|
|
{
|
|
static u8 param = 0xc8;
|
|
int error;
|
|
|
|
error = ps2_sliced_command(&psmouse->ps2dev, SYN_QUE_MODEL);
|
|
if (error)
|
|
return error;
|
|
|
|
error = ps2_command(&psmouse->ps2dev, ¶m, PSMOUSE_CMD_SETRATE);
|
|
if (error)
|
|
return error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int synaptics_set_mode(struct psmouse *psmouse)
|
|
{
|
|
struct synaptics_data *priv = psmouse->private;
|
|
int error;
|
|
|
|
priv->mode = 0;
|
|
if (priv->absolute_mode)
|
|
priv->mode |= SYN_BIT_ABSOLUTE_MODE;
|
|
if (priv->disable_gesture)
|
|
priv->mode |= SYN_BIT_DISABLE_GESTURE;
|
|
if (psmouse->rate >= 80)
|
|
priv->mode |= SYN_BIT_HIGH_RATE;
|
|
if (SYN_CAP_EXTENDED(priv->info.capabilities))
|
|
priv->mode |= SYN_BIT_W_MODE;
|
|
|
|
error = synaptics_mode_cmd(psmouse, priv->mode);
|
|
if (error)
|
|
return error;
|
|
|
|
if (priv->absolute_mode && synaptics_has_agm(priv)) {
|
|
error = synaptics_set_advanced_gesture_mode(psmouse);
|
|
if (error) {
|
|
psmouse_err(psmouse,
|
|
"Advanced gesture mode init failed: %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void synaptics_set_rate(struct psmouse *psmouse, unsigned int rate)
|
|
{
|
|
struct synaptics_data *priv = psmouse->private;
|
|
|
|
if (rate >= 80) {
|
|
priv->mode |= SYN_BIT_HIGH_RATE;
|
|
psmouse->rate = 80;
|
|
} else {
|
|
priv->mode &= ~SYN_BIT_HIGH_RATE;
|
|
psmouse->rate = 40;
|
|
}
|
|
|
|
synaptics_mode_cmd(psmouse, priv->mode);
|
|
}
|
|
|
|
/*****************************************************************************
|
|
* Synaptics pass-through PS/2 port support
|
|
****************************************************************************/
|
|
static int synaptics_pt_write(struct serio *serio, u8 c)
|
|
{
|
|
struct psmouse *parent = serio_get_drvdata(serio->parent);
|
|
u8 rate_param = SYN_PS_CLIENT_CMD; /* indicates that we want pass-through port */
|
|
int error;
|
|
|
|
error = ps2_sliced_command(&parent->ps2dev, c);
|
|
if (error)
|
|
return error;
|
|
|
|
error = ps2_command(&parent->ps2dev, &rate_param, PSMOUSE_CMD_SETRATE);
|
|
if (error)
|
|
return error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int synaptics_pt_start(struct serio *serio)
|
|
{
|
|
struct psmouse *parent = serio_get_drvdata(serio->parent);
|
|
struct synaptics_data *priv = parent->private;
|
|
|
|
serio_pause_rx(parent->ps2dev.serio);
|
|
priv->pt_port = serio;
|
|
serio_continue_rx(parent->ps2dev.serio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void synaptics_pt_stop(struct serio *serio)
|
|
{
|
|
struct psmouse *parent = serio_get_drvdata(serio->parent);
|
|
struct synaptics_data *priv = parent->private;
|
|
|
|
serio_pause_rx(parent->ps2dev.serio);
|
|
priv->pt_port = NULL;
|
|
serio_continue_rx(parent->ps2dev.serio);
|
|
}
|
|
|
|
static int synaptics_is_pt_packet(u8 *buf)
|
|
{
|
|
return (buf[0] & 0xFC) == 0x84 && (buf[3] & 0xCC) == 0xC4;
|
|
}
|
|
|
|
static void synaptics_pass_pt_packet(struct serio *ptport, u8 *packet)
|
|
{
|
|
struct psmouse *child = serio_get_drvdata(ptport);
|
|
|
|
if (child && child->state == PSMOUSE_ACTIVATED) {
|
|
serio_interrupt(ptport, packet[1], 0);
|
|
serio_interrupt(ptport, packet[4], 0);
|
|
serio_interrupt(ptport, packet[5], 0);
|
|
if (child->pktsize == 4)
|
|
serio_interrupt(ptport, packet[2], 0);
|
|
} else {
|
|
serio_interrupt(ptport, packet[1], 0);
|
|
}
|
|
}
|
|
|
|
static void synaptics_pt_activate(struct psmouse *psmouse)
|
|
{
|
|
struct synaptics_data *priv = psmouse->private;
|
|
struct psmouse *child = serio_get_drvdata(priv->pt_port);
|
|
|
|
/* adjust the touchpad to child's choice of protocol */
|
|
if (child) {
|
|
if (child->pktsize == 4)
|
|
priv->mode |= SYN_BIT_FOUR_BYTE_CLIENT;
|
|
else
|
|
priv->mode &= ~SYN_BIT_FOUR_BYTE_CLIENT;
|
|
|
|
if (synaptics_mode_cmd(psmouse, priv->mode))
|
|
psmouse_warn(psmouse,
|
|
"failed to switch guest protocol\n");
|
|
}
|
|
}
|
|
|
|
static void synaptics_pt_create(struct psmouse *psmouse)
|
|
{
|
|
struct serio *serio;
|
|
|
|
serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
|
|
if (!serio) {
|
|
psmouse_err(psmouse,
|
|
"not enough memory for pass-through port\n");
|
|
return;
|
|
}
|
|
|
|
serio->id.type = SERIO_PS_PSTHRU;
|
|
strlcpy(serio->name, "Synaptics pass-through", sizeof(serio->name));
|
|
strlcpy(serio->phys, "synaptics-pt/serio0", sizeof(serio->name));
|
|
serio->write = synaptics_pt_write;
|
|
serio->start = synaptics_pt_start;
|
|
serio->stop = synaptics_pt_stop;
|
|
serio->parent = psmouse->ps2dev.serio;
|
|
|
|
psmouse->pt_activate = synaptics_pt_activate;
|
|
|
|
psmouse_info(psmouse, "serio: %s port at %s\n",
|
|
serio->name, psmouse->phys);
|
|
serio_register_port(serio);
|
|
}
|
|
|
|
/*****************************************************************************
|
|
* Functions to interpret the absolute mode packets
|
|
****************************************************************************/
|
|
|
|
static void synaptics_parse_agm(const u8 buf[],
|
|
struct synaptics_data *priv,
|
|
struct synaptics_hw_state *hw)
|
|
{
|
|
struct synaptics_hw_state *agm = &priv->agm;
|
|
int agm_packet_type;
|
|
|
|
agm_packet_type = (buf[5] & 0x30) >> 4;
|
|
switch (agm_packet_type) {
|
|
case 1:
|
|
/* Gesture packet: (x, y, z) half resolution */
|
|
agm->w = hw->w;
|
|
agm->x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1;
|
|
agm->y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1;
|
|
agm->z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1;
|
|
break;
|
|
|
|
case 2:
|
|
/* AGM-CONTACT packet: we are only interested in the count */
|
|
priv->agm_count = buf[1];
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void synaptics_parse_ext_buttons(const u8 buf[],
|
|
struct synaptics_data *priv,
|
|
struct synaptics_hw_state *hw)
|
|
{
|
|
unsigned int ext_bits =
|
|
(SYN_CAP_MULTI_BUTTON_NO(priv->info.ext_cap) + 1) >> 1;
|
|
unsigned int ext_mask = GENMASK(ext_bits - 1, 0);
|
|
|
|
hw->ext_buttons = buf[4] & ext_mask;
|
|
hw->ext_buttons |= (buf[5] & ext_mask) << ext_bits;
|
|
}
|
|
|
|
static int synaptics_parse_hw_state(const u8 buf[],
|
|
struct synaptics_data *priv,
|
|
struct synaptics_hw_state *hw)
|
|
{
|
|
memset(hw, 0, sizeof(struct synaptics_hw_state));
|
|
|
|
if (SYN_MODEL_NEWABS(priv->info.model_id)) {
|
|
hw->w = (((buf[0] & 0x30) >> 2) |
|
|
((buf[0] & 0x04) >> 1) |
|
|
((buf[3] & 0x04) >> 2));
|
|
|
|
if (synaptics_has_agm(priv) && hw->w == 2) {
|
|
synaptics_parse_agm(buf, priv, hw);
|
|
return 1;
|
|
}
|
|
|
|
hw->x = (((buf[3] & 0x10) << 8) |
|
|
((buf[1] & 0x0f) << 8) |
|
|
buf[4]);
|
|
hw->y = (((buf[3] & 0x20) << 7) |
|
|
((buf[1] & 0xf0) << 4) |
|
|
buf[5]);
|
|
hw->z = buf[2];
|
|
|
|
hw->left = (buf[0] & 0x01) ? 1 : 0;
|
|
hw->right = (buf[0] & 0x02) ? 1 : 0;
|
|
|
|
if (priv->is_forcepad) {
|
|
/*
|
|
* ForcePads, like Clickpads, use middle button
|
|
* bits to report primary button clicks.
|
|
* Unfortunately they report primary button not
|
|
* only when user presses on the pad above certain
|
|
* threshold, but also when there are more than one
|
|
* finger on the touchpad, which interferes with
|
|
* out multi-finger gestures.
|
|
*/
|
|
if (hw->z == 0) {
|
|
/* No contacts */
|
|
priv->press = priv->report_press = false;
|
|
} else if (hw->w >= 4 && ((buf[0] ^ buf[3]) & 0x01)) {
|
|
/*
|
|
* Single-finger touch with pressure above
|
|
* the threshold. If pressure stays long
|
|
* enough, we'll start reporting primary
|
|
* button. We rely on the device continuing
|
|
* sending data even if finger does not
|
|
* move.
|
|
*/
|
|
if (!priv->press) {
|
|
priv->press_start = jiffies;
|
|
priv->press = true;
|
|
} else if (time_after(jiffies,
|
|
priv->press_start +
|
|
msecs_to_jiffies(50))) {
|
|
priv->report_press = true;
|
|
}
|
|
} else {
|
|
priv->press = false;
|
|
}
|
|
|
|
hw->left = priv->report_press;
|
|
|
|
} else if (SYN_CAP_CLICKPAD(priv->info.ext_cap_0c)) {
|
|
/*
|
|
* Clickpad's button is transmitted as middle button,
|
|
* however, since it is primary button, we will report
|
|
* it as BTN_LEFT.
|
|
*/
|
|
hw->left = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
|
|
|
|
} else if (SYN_CAP_MIDDLE_BUTTON(priv->info.capabilities)) {
|
|
hw->middle = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
|
|
if (hw->w == 2)
|
|
hw->scroll = (s8)buf[1];
|
|
}
|
|
|
|
if (SYN_CAP_FOUR_BUTTON(priv->info.capabilities)) {
|
|
hw->up = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
|
|
hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0;
|
|
}
|
|
|
|
if (SYN_CAP_MULTI_BUTTON_NO(priv->info.ext_cap) > 0 &&
|
|
((buf[0] ^ buf[3]) & 0x02)) {
|
|
synaptics_parse_ext_buttons(buf, priv, hw);
|
|
}
|
|
} else {
|
|
hw->x = (((buf[1] & 0x1f) << 8) | buf[2]);
|
|
hw->y = (((buf[4] & 0x1f) << 8) | buf[5]);
|
|
|
|
hw->z = (((buf[0] & 0x30) << 2) | (buf[3] & 0x3F));
|
|
hw->w = (((buf[1] & 0x80) >> 4) | ((buf[0] & 0x04) >> 1));
|
|
|
|
hw->left = (buf[0] & 0x01) ? 1 : 0;
|
|
hw->right = (buf[0] & 0x02) ? 1 : 0;
|
|
}
|
|
|
|
/*
|
|
* Convert wrap-around values to negative. (X|Y)_MAX_POSITIVE
|
|
* is used by some firmware to indicate a finger at the edge of
|
|
* the touchpad whose precise position cannot be determined, so
|
|
* convert these values to the maximum axis value.
|
|
*/
|
|
if (hw->x > X_MAX_POSITIVE)
|
|
hw->x -= 1 << ABS_POS_BITS;
|
|
else if (hw->x == X_MAX_POSITIVE)
|
|
hw->x = XMAX;
|
|
|
|
if (hw->y > Y_MAX_POSITIVE)
|
|
hw->y -= 1 << ABS_POS_BITS;
|
|
else if (hw->y == Y_MAX_POSITIVE)
|
|
hw->y = YMAX;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void synaptics_report_semi_mt_slot(struct input_dev *dev, int slot,
|
|
bool active, int x, int y)
|
|
{
|
|
input_mt_slot(dev, slot);
|
|
input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
|
|
if (active) {
|
|
input_report_abs(dev, ABS_MT_POSITION_X, x);
|
|
input_report_abs(dev, ABS_MT_POSITION_Y, synaptics_invert_y(y));
|
|
}
|
|
}
|
|
|
|
static void synaptics_report_semi_mt_data(struct input_dev *dev,
|
|
const struct synaptics_hw_state *a,
|
|
const struct synaptics_hw_state *b,
|
|
int num_fingers)
|
|
{
|
|
if (num_fingers >= 2) {
|
|
synaptics_report_semi_mt_slot(dev, 0, true, min(a->x, b->x),
|
|
min(a->y, b->y));
|
|
synaptics_report_semi_mt_slot(dev, 1, true, max(a->x, b->x),
|
|
max(a->y, b->y));
|
|
} else if (num_fingers == 1) {
|
|
synaptics_report_semi_mt_slot(dev, 0, true, a->x, a->y);
|
|
synaptics_report_semi_mt_slot(dev, 1, false, 0, 0);
|
|
} else {
|
|
synaptics_report_semi_mt_slot(dev, 0, false, 0, 0);
|
|
synaptics_report_semi_mt_slot(dev, 1, false, 0, 0);
|
|
}
|
|
}
|
|
|
|
static void synaptics_report_ext_buttons(struct psmouse *psmouse,
|
|
const struct synaptics_hw_state *hw)
|
|
{
|
|
struct input_dev *dev = psmouse->dev;
|
|
struct synaptics_data *priv = psmouse->private;
|
|
int ext_bits = (SYN_CAP_MULTI_BUTTON_NO(priv->info.ext_cap) + 1) >> 1;
|
|
int i;
|
|
|
|
if (!SYN_CAP_MULTI_BUTTON_NO(priv->info.ext_cap))
|
|
return;
|
|
|
|
/* Bug in FW 8.1 & 8.2, buttons are reported only when ExtBit is 1 */
|
|
if ((SYN_ID_FULL(priv->info.identity) == 0x801 ||
|
|
SYN_ID_FULL(priv->info.identity) == 0x802) &&
|
|
!((psmouse->packet[0] ^ psmouse->packet[3]) & 0x02))
|
|
return;
|
|
|
|
if (!SYN_CAP_EXT_BUTTONS_STICK(priv->info.ext_cap_10)) {
|
|
for (i = 0; i < ext_bits; i++) {
|
|
input_report_key(dev, BTN_0 + 2 * i,
|
|
hw->ext_buttons & BIT(i));
|
|
input_report_key(dev, BTN_1 + 2 * i,
|
|
hw->ext_buttons & BIT(i + ext_bits));
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* This generation of touchpads has the trackstick buttons
|
|
* physically wired to the touchpad. Re-route them through
|
|
* the pass-through interface.
|
|
*/
|
|
if (priv->pt_port) {
|
|
u8 pt_buttons;
|
|
|
|
/* The trackstick expects at most 3 buttons */
|
|
pt_buttons = SYN_EXT_BUTTON_STICK_L(hw->ext_buttons) |
|
|
SYN_EXT_BUTTON_STICK_R(hw->ext_buttons) << 1 |
|
|
SYN_EXT_BUTTON_STICK_M(hw->ext_buttons) << 2;
|
|
|
|
serio_interrupt(priv->pt_port,
|
|
PSMOUSE_OOB_EXTRA_BTNS, SERIO_OOB_DATA);
|
|
serio_interrupt(priv->pt_port, pt_buttons, SERIO_OOB_DATA);
|
|
}
|
|
}
|
|
|
|
static void synaptics_report_buttons(struct psmouse *psmouse,
|
|
const struct synaptics_hw_state *hw)
|
|
{
|
|
struct input_dev *dev = psmouse->dev;
|
|
struct synaptics_data *priv = psmouse->private;
|
|
|
|
input_report_key(dev, BTN_LEFT, hw->left);
|
|
input_report_key(dev, BTN_RIGHT, hw->right);
|
|
|
|
if (SYN_CAP_MIDDLE_BUTTON(priv->info.capabilities))
|
|
input_report_key(dev, BTN_MIDDLE, hw->middle);
|
|
|
|
if (SYN_CAP_FOUR_BUTTON(priv->info.capabilities)) {
|
|
input_report_key(dev, BTN_FORWARD, hw->up);
|
|
input_report_key(dev, BTN_BACK, hw->down);
|
|
}
|
|
|
|
synaptics_report_ext_buttons(psmouse, hw);
|
|
}
|
|
|
|
static void synaptics_report_mt_data(struct psmouse *psmouse,
|
|
const struct synaptics_hw_state *sgm,
|
|
int num_fingers)
|
|
{
|
|
struct input_dev *dev = psmouse->dev;
|
|
struct synaptics_data *priv = psmouse->private;
|
|
const struct synaptics_hw_state *hw[2] = { sgm, &priv->agm };
|
|
struct input_mt_pos pos[2];
|
|
int slot[2], nsemi, i;
|
|
|
|
nsemi = clamp_val(num_fingers, 0, 2);
|
|
|
|
for (i = 0; i < nsemi; i++) {
|
|
pos[i].x = hw[i]->x;
|
|
pos[i].y = synaptics_invert_y(hw[i]->y);
|
|
}
|
|
|
|
input_mt_assign_slots(dev, slot, pos, nsemi, DMAX * priv->info.x_res);
|
|
|
|
for (i = 0; i < nsemi; i++) {
|
|
input_mt_slot(dev, slot[i]);
|
|
input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
|
|
input_report_abs(dev, ABS_MT_POSITION_X, pos[i].x);
|
|
input_report_abs(dev, ABS_MT_POSITION_Y, pos[i].y);
|
|
input_report_abs(dev, ABS_MT_PRESSURE, hw[i]->z);
|
|
}
|
|
|
|
input_mt_drop_unused(dev);
|
|
|
|
/* Don't use active slot count to generate BTN_TOOL events. */
|
|
input_mt_report_pointer_emulation(dev, false);
|
|
|
|
/* Send the number of fingers reported by touchpad itself. */
|
|
input_mt_report_finger_count(dev, num_fingers);
|
|
|
|
synaptics_report_buttons(psmouse, sgm);
|
|
|
|
input_sync(dev);
|
|
}
|
|
|
|
static void synaptics_image_sensor_process(struct psmouse *psmouse,
|
|
struct synaptics_hw_state *sgm)
|
|
{
|
|
struct synaptics_data *priv = psmouse->private;
|
|
int num_fingers;
|
|
|
|
/*
|
|
* Update mt_state using the new finger count and current mt_state.
|
|
*/
|
|
if (sgm->z == 0)
|
|
num_fingers = 0;
|
|
else if (sgm->w >= 4)
|
|
num_fingers = 1;
|
|
else if (sgm->w == 0)
|
|
num_fingers = 2;
|
|
else if (sgm->w == 1)
|
|
num_fingers = priv->agm_count ? priv->agm_count : 3;
|
|
else
|
|
num_fingers = 4;
|
|
|
|
/* Send resulting input events to user space */
|
|
synaptics_report_mt_data(psmouse, sgm, num_fingers);
|
|
}
|
|
|
|
static bool synaptics_has_multifinger(struct synaptics_data *priv)
|
|
{
|
|
if (SYN_CAP_MULTIFINGER(priv->info.capabilities))
|
|
return true;
|
|
|
|
/* Advanced gesture mode also sends multi finger data */
|
|
return synaptics_has_agm(priv);
|
|
}
|
|
|
|
/*
|
|
* called for each full received packet from the touchpad
|
|
*/
|
|
static void synaptics_process_packet(struct psmouse *psmouse)
|
|
{
|
|
struct input_dev *dev = psmouse->dev;
|
|
struct synaptics_data *priv = psmouse->private;
|
|
struct synaptics_device_info *info = &priv->info;
|
|
struct synaptics_hw_state hw;
|
|
int num_fingers;
|
|
int finger_width;
|
|
|
|
if (synaptics_parse_hw_state(psmouse->packet, priv, &hw))
|
|
return;
|
|
|
|
if (SYN_CAP_IMAGE_SENSOR(info->ext_cap_0c)) {
|
|
synaptics_image_sensor_process(psmouse, &hw);
|
|
return;
|
|
}
|
|
|
|
if (hw.scroll) {
|
|
priv->scroll += hw.scroll;
|
|
|
|
while (priv->scroll >= 4) {
|
|
input_report_key(dev, BTN_BACK, !hw.down);
|
|
input_sync(dev);
|
|
input_report_key(dev, BTN_BACK, hw.down);
|
|
input_sync(dev);
|
|
priv->scroll -= 4;
|
|
}
|
|
while (priv->scroll <= -4) {
|
|
input_report_key(dev, BTN_FORWARD, !hw.up);
|
|
input_sync(dev);
|
|
input_report_key(dev, BTN_FORWARD, hw.up);
|
|
input_sync(dev);
|
|
priv->scroll += 4;
|
|
}
|
|
return;
|
|
}
|
|
|
|
if (hw.z > 0 && hw.x > 1) {
|
|
num_fingers = 1;
|
|
finger_width = 5;
|
|
if (SYN_CAP_EXTENDED(info->capabilities)) {
|
|
switch (hw.w) {
|
|
case 0 ... 1:
|
|
if (synaptics_has_multifinger(priv))
|
|
num_fingers = hw.w + 2;
|
|
break;
|
|
case 2:
|
|
if (SYN_MODEL_PEN(info->model_id))
|
|
; /* Nothing, treat a pen as a single finger */
|
|
break;
|
|
case 4 ... 15:
|
|
if (SYN_CAP_PALMDETECT(info->capabilities))
|
|
finger_width = hw.w;
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
num_fingers = 0;
|
|
finger_width = 0;
|
|
}
|
|
|
|
if (cr48_profile_sensor) {
|
|
synaptics_report_mt_data(psmouse, &hw, num_fingers);
|
|
return;
|
|
}
|
|
|
|
if (SYN_CAP_ADV_GESTURE(info->ext_cap_0c))
|
|
synaptics_report_semi_mt_data(dev, &hw, &priv->agm,
|
|
num_fingers);
|
|
|
|
/* Post events
|
|
* BTN_TOUCH has to be first as mousedev relies on it when doing
|
|
* absolute -> relative conversion
|
|
*/
|
|
if (hw.z > 30) input_report_key(dev, BTN_TOUCH, 1);
|
|
if (hw.z < 25) input_report_key(dev, BTN_TOUCH, 0);
|
|
|
|
if (num_fingers > 0) {
|
|
input_report_abs(dev, ABS_X, hw.x);
|
|
input_report_abs(dev, ABS_Y, synaptics_invert_y(hw.y));
|
|
}
|
|
input_report_abs(dev, ABS_PRESSURE, hw.z);
|
|
|
|
if (SYN_CAP_PALMDETECT(info->capabilities))
|
|
input_report_abs(dev, ABS_TOOL_WIDTH, finger_width);
|
|
|
|
input_report_key(dev, BTN_TOOL_FINGER, num_fingers == 1);
|
|
if (synaptics_has_multifinger(priv)) {
|
|
input_report_key(dev, BTN_TOOL_DOUBLETAP, num_fingers == 2);
|
|
input_report_key(dev, BTN_TOOL_TRIPLETAP, num_fingers == 3);
|
|
}
|
|
|
|
synaptics_report_buttons(psmouse, &hw);
|
|
|
|
input_sync(dev);
|
|
}
|
|
|
|
static bool synaptics_validate_byte(struct psmouse *psmouse,
|
|
int idx, enum synaptics_pkt_type pkt_type)
|
|
{
|
|
static const u8 newabs_mask[] = { 0xC8, 0x00, 0x00, 0xC8, 0x00 };
|
|
static const u8 newabs_rel_mask[] = { 0xC0, 0x00, 0x00, 0xC0, 0x00 };
|
|
static const u8 newabs_rslt[] = { 0x80, 0x00, 0x00, 0xC0, 0x00 };
|
|
static const u8 oldabs_mask[] = { 0xC0, 0x60, 0x00, 0xC0, 0x60 };
|
|
static const u8 oldabs_rslt[] = { 0xC0, 0x00, 0x00, 0x80, 0x00 };
|
|
const u8 *packet = psmouse->packet;
|
|
|
|
if (idx < 0 || idx > 4)
|
|
return false;
|
|
|
|
switch (pkt_type) {
|
|
|
|
case SYN_NEWABS:
|
|
case SYN_NEWABS_RELAXED:
|
|
return (packet[idx] & newabs_rel_mask[idx]) == newabs_rslt[idx];
|
|
|
|
case SYN_NEWABS_STRICT:
|
|
return (packet[idx] & newabs_mask[idx]) == newabs_rslt[idx];
|
|
|
|
case SYN_OLDABS:
|
|
return (packet[idx] & oldabs_mask[idx]) == oldabs_rslt[idx];
|
|
|
|
default:
|
|
psmouse_err(psmouse, "unknown packet type %d\n", pkt_type);
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static enum synaptics_pkt_type
|
|
synaptics_detect_pkt_type(struct psmouse *psmouse)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
if (!synaptics_validate_byte(psmouse, i, SYN_NEWABS_STRICT)) {
|
|
psmouse_info(psmouse, "using relaxed packet validation\n");
|
|
return SYN_NEWABS_RELAXED;
|
|
}
|
|
}
|
|
|
|
return SYN_NEWABS_STRICT;
|
|
}
|
|
|
|
static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse)
|
|
{
|
|
struct synaptics_data *priv = psmouse->private;
|
|
|
|
if (psmouse->pktcnt >= 6) { /* Full packet received */
|
|
if (unlikely(priv->pkt_type == SYN_NEWABS))
|
|
priv->pkt_type = synaptics_detect_pkt_type(psmouse);
|
|
|
|
if (SYN_CAP_PASS_THROUGH(priv->info.capabilities) &&
|
|
synaptics_is_pt_packet(psmouse->packet)) {
|
|
if (priv->pt_port)
|
|
synaptics_pass_pt_packet(priv->pt_port,
|
|
psmouse->packet);
|
|
} else
|
|
synaptics_process_packet(psmouse);
|
|
|
|
return PSMOUSE_FULL_PACKET;
|
|
}
|
|
|
|
return synaptics_validate_byte(psmouse, psmouse->pktcnt - 1, priv->pkt_type) ?
|
|
PSMOUSE_GOOD_DATA : PSMOUSE_BAD_DATA;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
* Driver initialization/cleanup functions
|
|
****************************************************************************/
|
|
static void set_abs_position_params(struct input_dev *dev,
|
|
struct synaptics_device_info *info,
|
|
int x_code, int y_code)
|
|
{
|
|
int x_min = info->x_min ?: XMIN_NOMINAL;
|
|
int x_max = info->x_max ?: XMAX_NOMINAL;
|
|
int y_min = info->y_min ?: YMIN_NOMINAL;
|
|
int y_max = info->y_max ?: YMAX_NOMINAL;
|
|
int fuzz = SYN_CAP_REDUCED_FILTERING(info->ext_cap_0c) ?
|
|
SYN_REDUCED_FILTER_FUZZ : 0;
|
|
|
|
input_set_abs_params(dev, x_code, x_min, x_max, fuzz, 0);
|
|
input_set_abs_params(dev, y_code, y_min, y_max, fuzz, 0);
|
|
input_abs_set_res(dev, x_code, info->x_res);
|
|
input_abs_set_res(dev, y_code, info->y_res);
|
|
}
|
|
|
|
static int set_input_params(struct psmouse *psmouse,
|
|
struct synaptics_data *priv)
|
|
{
|
|
struct input_dev *dev = psmouse->dev;
|
|
struct synaptics_device_info *info = &priv->info;
|
|
int i;
|
|
int error;
|
|
|
|
/* Reset default psmouse capabilities */
|
|
__clear_bit(EV_REL, dev->evbit);
|
|
bitmap_zero(dev->relbit, REL_CNT);
|
|
bitmap_zero(dev->keybit, KEY_CNT);
|
|
|
|
/* Things that apply to both modes */
|
|
__set_bit(INPUT_PROP_POINTER, dev->propbit);
|
|
|
|
input_set_capability(dev, EV_KEY, BTN_LEFT);
|
|
|
|
/* Clickpads report only left button */
|
|
if (!SYN_CAP_CLICKPAD(info->ext_cap_0c)) {
|
|
input_set_capability(dev, EV_KEY, BTN_RIGHT);
|
|
if (SYN_CAP_MIDDLE_BUTTON(info->capabilities))
|
|
input_set_capability(dev, EV_KEY, BTN_MIDDLE);
|
|
}
|
|
|
|
if (!priv->absolute_mode) {
|
|
/* Relative mode */
|
|
input_set_capability(dev, EV_REL, REL_X);
|
|
input_set_capability(dev, EV_REL, REL_Y);
|
|
return 0;
|
|
}
|
|
|
|
/* Absolute mode */
|
|
set_abs_position_params(dev, &priv->info, ABS_X, ABS_Y);
|
|
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
|
|
|
|
if (cr48_profile_sensor)
|
|
input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
|
|
|
|
if (SYN_CAP_IMAGE_SENSOR(info->ext_cap_0c)) {
|
|
set_abs_position_params(dev, info,
|
|
ABS_MT_POSITION_X, ABS_MT_POSITION_Y);
|
|
/* Image sensors can report per-contact pressure */
|
|
input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
|
|
|
|
error = input_mt_init_slots(dev, 2,
|
|
INPUT_MT_POINTER | INPUT_MT_TRACK);
|
|
if (error)
|
|
return error;
|
|
|
|
/* Image sensors can signal 4 and 5 finger clicks */
|
|
input_set_capability(dev, EV_KEY, BTN_TOOL_QUADTAP);
|
|
input_set_capability(dev, EV_KEY, BTN_TOOL_QUINTTAP);
|
|
} else if (SYN_CAP_ADV_GESTURE(info->ext_cap_0c)) {
|
|
set_abs_position_params(dev, info,
|
|
ABS_MT_POSITION_X, ABS_MT_POSITION_Y);
|
|
/*
|
|
* Profile sensor in CR-48 tracks contacts reasonably well,
|
|
* other non-image sensors with AGM use semi-mt.
|
|
*/
|
|
error = input_mt_init_slots(dev, 2,
|
|
INPUT_MT_POINTER |
|
|
(cr48_profile_sensor ?
|
|
INPUT_MT_TRACK :
|
|
INPUT_MT_SEMI_MT));
|
|
if (error)
|
|
return error;
|
|
|
|
/*
|
|
* For semi-mt devices we send ABS_X/Y ourselves instead of
|
|
* input_mt_report_pointer_emulation. But
|
|
* input_mt_init_slots() resets the fuzz to 0, leading to a
|
|
* filtered ABS_MT_POSITION_X but an unfiltered ABS_X
|
|
* position. Let's re-initialize ABS_X/Y here.
|
|
*/
|
|
if (!cr48_profile_sensor)
|
|
set_abs_position_params(dev, &priv->info, ABS_X, ABS_Y);
|
|
}
|
|
|
|
if (SYN_CAP_PALMDETECT(info->capabilities))
|
|
input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
|
|
|
|
input_set_capability(dev, EV_KEY, BTN_TOUCH);
|
|
input_set_capability(dev, EV_KEY, BTN_TOOL_FINGER);
|
|
|
|
if (synaptics_has_multifinger(priv)) {
|
|
input_set_capability(dev, EV_KEY, BTN_TOOL_DOUBLETAP);
|
|
input_set_capability(dev, EV_KEY, BTN_TOOL_TRIPLETAP);
|
|
}
|
|
|
|
if (SYN_CAP_FOUR_BUTTON(info->capabilities) ||
|
|
SYN_CAP_MIDDLE_BUTTON(info->capabilities)) {
|
|
input_set_capability(dev, EV_KEY, BTN_FORWARD);
|
|
input_set_capability(dev, EV_KEY, BTN_BACK);
|
|
}
|
|
|
|
if (!SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10))
|
|
for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(info->ext_cap); i++)
|
|
input_set_capability(dev, EV_KEY, BTN_0 + i);
|
|
|
|
if (SYN_CAP_CLICKPAD(info->ext_cap_0c)) {
|
|
__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
|
|
if (psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) &&
|
|
!SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10))
|
|
__set_bit(INPUT_PROP_TOPBUTTONPAD, dev->propbit);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t synaptics_show_disable_gesture(struct psmouse *psmouse,
|
|
void *data, char *buf)
|
|
{
|
|
struct synaptics_data *priv = psmouse->private;
|
|
|
|
return sprintf(buf, "%c\n", priv->disable_gesture ? '1' : '0');
|
|
}
|
|
|
|
static ssize_t synaptics_set_disable_gesture(struct psmouse *psmouse,
|
|
void *data, const char *buf,
|
|
size_t len)
|
|
{
|
|
struct synaptics_data *priv = psmouse->private;
|
|
unsigned int value;
|
|
int err;
|
|
|
|
err = kstrtouint(buf, 10, &value);
|
|
if (err)
|
|
return err;
|
|
|
|
if (value > 1)
|
|
return -EINVAL;
|
|
|
|
if (value == priv->disable_gesture)
|
|
return len;
|
|
|
|
priv->disable_gesture = value;
|
|
if (value)
|
|
priv->mode |= SYN_BIT_DISABLE_GESTURE;
|
|
else
|
|
priv->mode &= ~SYN_BIT_DISABLE_GESTURE;
|
|
|
|
if (synaptics_mode_cmd(psmouse, priv->mode))
|
|
return -EIO;
|
|
|
|
return len;
|
|
}
|
|
|
|
PSMOUSE_DEFINE_ATTR(disable_gesture, S_IWUSR | S_IRUGO, NULL,
|
|
synaptics_show_disable_gesture,
|
|
synaptics_set_disable_gesture);
|
|
|
|
static void synaptics_disconnect(struct psmouse *psmouse)
|
|
{
|
|
struct synaptics_data *priv = psmouse->private;
|
|
|
|
/*
|
|
* We might have left a breadcrumb when trying to
|
|
* set up SMbus companion.
|
|
*/
|
|
psmouse_smbus_cleanup(psmouse);
|
|
|
|
if (!priv->absolute_mode &&
|
|
SYN_ID_DISGEST_SUPPORTED(priv->info.identity))
|
|
device_remove_file(&psmouse->ps2dev.serio->dev,
|
|
&psmouse_attr_disable_gesture.dattr);
|
|
|
|
synaptics_reset(psmouse);
|
|
kfree(priv);
|
|
psmouse->private = NULL;
|
|
}
|
|
|
|
static int synaptics_reconnect(struct psmouse *psmouse)
|
|
{
|
|
struct synaptics_data *priv = psmouse->private;
|
|
struct synaptics_device_info info;
|
|
u8 param[2];
|
|
int retry = 0;
|
|
int error;
|
|
|
|
do {
|
|
psmouse_reset(psmouse);
|
|
if (retry) {
|
|
/*
|
|
* On some boxes, right after resuming, the touchpad
|
|
* needs some time to finish initializing (I assume
|
|
* it needs time to calibrate) and start responding
|
|
* to Synaptics-specific queries, so let's wait a
|
|
* bit.
|
|
*/
|
|
ssleep(1);
|
|
}
|
|
ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETID);
|
|
error = synaptics_detect(psmouse, 0);
|
|
} while (error && ++retry < 3);
|
|
|
|
if (error)
|
|
return error;
|
|
|
|
if (retry > 1)
|
|
psmouse_dbg(psmouse, "reconnected after %d tries\n", retry);
|
|
|
|
error = synaptics_query_hardware(psmouse, &info);
|
|
if (error) {
|
|
psmouse_err(psmouse, "Unable to query device.\n");
|
|
return error;
|
|
}
|
|
|
|
error = synaptics_set_mode(psmouse);
|
|
if (error) {
|
|
psmouse_err(psmouse, "Unable to initialize device.\n");
|
|
return error;
|
|
}
|
|
|
|
if (info.identity != priv->info.identity ||
|
|
info.model_id != priv->info.model_id ||
|
|
info.capabilities != priv->info.capabilities ||
|
|
info.ext_cap != priv->info.ext_cap) {
|
|
psmouse_err(psmouse,
|
|
"hardware appears to be different: id(%u-%u), model(%u-%u), caps(%x-%x), ext(%x-%x).\n",
|
|
priv->info.identity, info.identity,
|
|
priv->info.model_id, info.model_id,
|
|
priv->info.capabilities, info.capabilities,
|
|
priv->info.ext_cap, info.ext_cap);
|
|
return -ENXIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool impaired_toshiba_kbc;
|
|
|
|
static const struct dmi_system_id toshiba_dmi_table[] __initconst = {
|
|
#if defined(CONFIG_DMI) && defined(CONFIG_X86)
|
|
{
|
|
/* Toshiba Satellite */
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Satellite"),
|
|
},
|
|
},
|
|
{
|
|
/* Toshiba Dynabook */
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "dynabook"),
|
|
},
|
|
},
|
|
{
|
|
/* Toshiba Portege M300 */
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M300"),
|
|
},
|
|
|
|
},
|
|
{
|
|
/* Toshiba Portege M300 */
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Portable PC"),
|
|
DMI_MATCH(DMI_PRODUCT_VERSION, "Version 1.0"),
|
|
},
|
|
|
|
},
|
|
#endif
|
|
{ }
|
|
};
|
|
|
|
static bool broken_olpc_ec;
|
|
|
|
static const struct dmi_system_id olpc_dmi_table[] __initconst = {
|
|
#if defined(CONFIG_DMI) && defined(CONFIG_OLPC)
|
|
{
|
|
/* OLPC XO-1 or XO-1.5 */
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "OLPC"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "XO"),
|
|
},
|
|
},
|
|
#endif
|
|
{ }
|
|
};
|
|
|
|
static const struct dmi_system_id __initconst cr48_dmi_table[] = {
|
|
#if defined(CONFIG_DMI) && defined(CONFIG_X86)
|
|
{
|
|
/* Cr-48 Chromebook (Codename Mario) */
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "IEC"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Mario"),
|
|
},
|
|
},
|
|
#endif
|
|
{ }
|
|
};
|
|
|
|
void __init synaptics_module_init(void)
|
|
{
|
|
impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table);
|
|
broken_olpc_ec = dmi_check_system(olpc_dmi_table);
|
|
cr48_profile_sensor = dmi_check_system(cr48_dmi_table);
|
|
}
|
|
|
|
static int synaptics_init_ps2(struct psmouse *psmouse,
|
|
struct synaptics_device_info *info,
|
|
bool absolute_mode)
|
|
{
|
|
struct synaptics_data *priv;
|
|
int err;
|
|
|
|
synaptics_apply_quirks(psmouse, info);
|
|
|
|
psmouse->private = priv = kzalloc(sizeof(struct synaptics_data), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->info = *info;
|
|
priv->absolute_mode = absolute_mode;
|
|
if (SYN_ID_DISGEST_SUPPORTED(info->identity))
|
|
priv->disable_gesture = true;
|
|
|
|
/*
|
|
* Unfortunately ForcePad capability is not exported over PS/2,
|
|
* so we have to resort to checking PNP IDs.
|
|
*/
|
|
priv->is_forcepad = psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids);
|
|
|
|
err = synaptics_set_mode(psmouse);
|
|
if (err) {
|
|
psmouse_err(psmouse, "Unable to initialize device.\n");
|
|
goto init_fail;
|
|
}
|
|
|
|
priv->pkt_type = SYN_MODEL_NEWABS(info->model_id) ?
|
|
SYN_NEWABS : SYN_OLDABS;
|
|
|
|
psmouse_info(psmouse,
|
|
"Touchpad model: %lu, fw: %lu.%lu, id: %#x, caps: %#x/%#x/%#x/%#x, board id: %u, fw id: %u\n",
|
|
SYN_ID_MODEL(info->identity),
|
|
SYN_ID_MAJOR(info->identity), SYN_ID_MINOR(info->identity),
|
|
info->model_id,
|
|
info->capabilities, info->ext_cap, info->ext_cap_0c,
|
|
info->ext_cap_10, info->board_id, info->firmware_id);
|
|
|
|
err = set_input_params(psmouse, priv);
|
|
if (err) {
|
|
psmouse_err(psmouse,
|
|
"failed to set up capabilities: %d\n", err);
|
|
goto init_fail;
|
|
}
|
|
|
|
/*
|
|
* Encode touchpad model so that it can be used to set
|
|
* input device->id.version and be visible to userspace.
|
|
* Because version is __u16 we have to drop something.
|
|
* Hardware info bits seem to be good candidates as they
|
|
* are documented to be for Synaptics corp. internal use.
|
|
*/
|
|
psmouse->model = ((info->model_id & 0x00ff0000) >> 8) |
|
|
(info->model_id & 0x000000ff);
|
|
|
|
if (absolute_mode) {
|
|
psmouse->protocol_handler = synaptics_process_byte;
|
|
psmouse->pktsize = 6;
|
|
} else {
|
|
/* Relative mode follows standard PS/2 mouse protocol */
|
|
psmouse->protocol_handler = psmouse_process_byte;
|
|
psmouse->pktsize = 3;
|
|
}
|
|
|
|
psmouse->set_rate = synaptics_set_rate;
|
|
psmouse->disconnect = synaptics_disconnect;
|
|
psmouse->reconnect = synaptics_reconnect;
|
|
psmouse->cleanup = synaptics_reset;
|
|
/* Synaptics can usually stay in sync without extra help */
|
|
psmouse->resync_time = 0;
|
|
|
|
if (SYN_CAP_PASS_THROUGH(info->capabilities))
|
|
synaptics_pt_create(psmouse);
|
|
|
|
/*
|
|
* Toshiba's KBC seems to have trouble handling data from
|
|
* Synaptics at full rate. Switch to a lower rate (roughly
|
|
* the same rate as a standard PS/2 mouse).
|
|
*/
|
|
if (psmouse->rate >= 80 && impaired_toshiba_kbc) {
|
|
psmouse_info(psmouse,
|
|
"Toshiba %s detected, limiting rate to 40pps.\n",
|
|
dmi_get_system_info(DMI_PRODUCT_NAME));
|
|
psmouse->rate = 40;
|
|
}
|
|
|
|
if (!priv->absolute_mode && SYN_ID_DISGEST_SUPPORTED(info->identity)) {
|
|
err = device_create_file(&psmouse->ps2dev.serio->dev,
|
|
&psmouse_attr_disable_gesture.dattr);
|
|
if (err) {
|
|
psmouse_err(psmouse,
|
|
"Failed to create disable_gesture attribute (%d)",
|
|
err);
|
|
goto init_fail;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
init_fail:
|
|
kfree(priv);
|
|
return err;
|
|
}
|
|
|
|
static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode)
|
|
{
|
|
struct synaptics_device_info info;
|
|
int error;
|
|
|
|
psmouse_reset(psmouse);
|
|
|
|
error = synaptics_query_hardware(psmouse, &info);
|
|
if (error) {
|
|
psmouse_err(psmouse, "Unable to query device: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
return synaptics_init_ps2(psmouse, &info, absolute_mode);
|
|
}
|
|
|
|
int synaptics_init_absolute(struct psmouse *psmouse)
|
|
{
|
|
return __synaptics_init(psmouse, true);
|
|
}
|
|
|
|
int synaptics_init_relative(struct psmouse *psmouse)
|
|
{
|
|
return __synaptics_init(psmouse, false);
|
|
}
|
|
|
|
static int synaptics_setup_ps2(struct psmouse *psmouse,
|
|
struct synaptics_device_info *info)
|
|
{
|
|
bool absolute_mode = true;
|
|
int error;
|
|
|
|
/*
|
|
* The OLPC XO has issues with Synaptics' absolute mode; the constant
|
|
* packet spew overloads the EC such that key presses on the keyboard
|
|
* are missed. Given that, don't even attempt to use Absolute mode.
|
|
* Relative mode seems to work just fine.
|
|
*/
|
|
if (broken_olpc_ec) {
|
|
psmouse_info(psmouse,
|
|
"OLPC XO detected, forcing relative protocol.\n");
|
|
absolute_mode = false;
|
|
}
|
|
|
|
error = synaptics_init_ps2(psmouse, info, absolute_mode);
|
|
if (error)
|
|
return error;
|
|
|
|
return absolute_mode ? PSMOUSE_SYNAPTICS : PSMOUSE_SYNAPTICS_RELATIVE;
|
|
}
|
|
|
|
#else /* CONFIG_MOUSE_PS2_SYNAPTICS */
|
|
|
|
void __init synaptics_module_init(void)
|
|
{
|
|
}
|
|
|
|
static int __maybe_unused
|
|
synaptics_setup_ps2(struct psmouse *psmouse,
|
|
struct synaptics_device_info *info)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
|
|
#endif /* CONFIG_MOUSE_PS2_SYNAPTICS */
|
|
|
|
#ifdef CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS
|
|
|
|
/*
|
|
* The newest Synaptics device can use a secondary bus (called InterTouch) which
|
|
* provides a better bandwidth and allow a better control of the touchpads.
|
|
* This is used to decide if we need to use this bus or not.
|
|
*/
|
|
enum {
|
|
SYNAPTICS_INTERTOUCH_NOT_SET = -1,
|
|
SYNAPTICS_INTERTOUCH_OFF,
|
|
SYNAPTICS_INTERTOUCH_ON,
|
|
};
|
|
|
|
static int synaptics_intertouch = IS_ENABLED(CONFIG_RMI4_SMB) ?
|
|
SYNAPTICS_INTERTOUCH_NOT_SET : SYNAPTICS_INTERTOUCH_OFF;
|
|
module_param_named(synaptics_intertouch, synaptics_intertouch, int, 0644);
|
|
MODULE_PARM_DESC(synaptics_intertouch, "Use a secondary bus for the Synaptics device.");
|
|
|
|
static int synaptics_create_intertouch(struct psmouse *psmouse,
|
|
struct synaptics_device_info *info,
|
|
bool leave_breadcrumbs)
|
|
{
|
|
bool topbuttonpad =
|
|
psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) &&
|
|
!SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10);
|
|
const struct rmi_device_platform_data pdata = {
|
|
.sensor_pdata = {
|
|
.sensor_type = rmi_sensor_touchpad,
|
|
.axis_align.flip_y = true,
|
|
.kernel_tracking = false,
|
|
.topbuttonpad = topbuttonpad,
|
|
},
|
|
.f30_data = {
|
|
.buttonpad = SYN_CAP_CLICKPAD(info->ext_cap_0c),
|
|
.trackstick_buttons =
|
|
!!SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10),
|
|
},
|
|
};
|
|
const struct i2c_board_info intertouch_board = {
|
|
I2C_BOARD_INFO("rmi4_smbus", 0x2c),
|
|
.flags = I2C_CLIENT_HOST_NOTIFY,
|
|
};
|
|
|
|
return psmouse_smbus_init(psmouse, &intertouch_board,
|
|
&pdata, sizeof(pdata), true,
|
|
leave_breadcrumbs);
|
|
}
|
|
|
|
/**
|
|
* synaptics_setup_intertouch - called once the PS/2 devices are enumerated
|
|
* and decides to instantiate a SMBus InterTouch device.
|
|
*/
|
|
static int synaptics_setup_intertouch(struct psmouse *psmouse,
|
|
struct synaptics_device_info *info,
|
|
bool leave_breadcrumbs)
|
|
{
|
|
int error;
|
|
|
|
if (synaptics_intertouch == SYNAPTICS_INTERTOUCH_OFF)
|
|
return -ENXIO;
|
|
|
|
if (synaptics_intertouch == SYNAPTICS_INTERTOUCH_NOT_SET) {
|
|
if (!psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) &&
|
|
!psmouse_matches_pnp_id(psmouse, smbus_pnp_ids)) {
|
|
|
|
if (!psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids))
|
|
psmouse_info(psmouse,
|
|
"Your touchpad (%s) says it can support a different bus. "
|
|
"If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.\n",
|
|
psmouse->ps2dev.serio->firmware_id);
|
|
|
|
return -ENXIO;
|
|
}
|
|
}
|
|
|
|
psmouse_info(psmouse, "Trying to set up SMBus access\n");
|
|
|
|
error = synaptics_create_intertouch(psmouse, info, leave_breadcrumbs);
|
|
if (error) {
|
|
if (error == -EAGAIN)
|
|
psmouse_info(psmouse, "SMbus companion is not ready yet\n");
|
|
else
|
|
psmouse_err(psmouse, "unable to create intertouch device\n");
|
|
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int synaptics_init_smbus(struct psmouse *psmouse)
|
|
{
|
|
struct synaptics_device_info info;
|
|
int error;
|
|
|
|
psmouse_reset(psmouse);
|
|
|
|
error = synaptics_query_hardware(psmouse, &info);
|
|
if (error) {
|
|
psmouse_err(psmouse, "Unable to query device: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
if (!SYN_CAP_INTERTOUCH(info.ext_cap_0c))
|
|
return -ENXIO;
|
|
|
|
return synaptics_create_intertouch(psmouse, &info, false);
|
|
}
|
|
|
|
#else /* CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS */
|
|
|
|
static int __maybe_unused
|
|
synaptics_setup_intertouch(struct psmouse *psmouse,
|
|
struct synaptics_device_info *info,
|
|
bool leave_breadcrumbs)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
|
|
int synaptics_init_smbus(struct psmouse *psmouse)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
|
|
#endif /* CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS */
|
|
|
|
#if defined(CONFIG_MOUSE_PS2_SYNAPTICS) || \
|
|
defined(CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS)
|
|
|
|
int synaptics_init(struct psmouse *psmouse)
|
|
{
|
|
struct synaptics_device_info info;
|
|
int error;
|
|
int retval;
|
|
|
|
psmouse_reset(psmouse);
|
|
|
|
error = synaptics_query_hardware(psmouse, &info);
|
|
if (error) {
|
|
psmouse_err(psmouse, "Unable to query device: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
if (SYN_CAP_INTERTOUCH(info.ext_cap_0c)) {
|
|
if ((!IS_ENABLED(CONFIG_RMI4_SMB) ||
|
|
!IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS)) &&
|
|
/* Forcepads need F21, which is not ready */
|
|
!psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids)) {
|
|
psmouse_warn(psmouse,
|
|
"The touchpad can support a better bus than the too old PS/2 protocol. "
|
|
"Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.\n");
|
|
}
|
|
|
|
error = synaptics_setup_intertouch(psmouse, &info, true);
|
|
if (!error)
|
|
return PSMOUSE_SYNAPTICS_SMBUS;
|
|
}
|
|
|
|
retval = synaptics_setup_ps2(psmouse, &info);
|
|
if (retval < 0) {
|
|
/*
|
|
* Not using any flavor of Synaptics support, so clean up
|
|
* SMbus breadcrumbs, if any.
|
|
*/
|
|
psmouse_smbus_cleanup(psmouse);
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
#else /* CONFIG_MOUSE_PS2_SYNAPTICS || CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS */
|
|
|
|
int synaptics_init(struct psmouse *psmouse)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
|
|
#endif /* CONFIG_MOUSE_PS2_SYNAPTICS || CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS */
|