linux_dsm_epyc7002/arch/arm/kernel/swp_emulate.c
Linus Torvalds 93e95fa574 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo updates from Eric Biederman:
 "This set of changes close the known issues with setting si_code to an
  invalid value, and with not fully initializing struct siginfo. There
  remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
  and x86 to get the code that generates siginfo into a simpler and more
  maintainable state. Most of that work involves refactoring the signal
  handling code and thus careful code review.

  Also not included is the work to shrink the in kernel version of
  struct siginfo. That depends on getting the number of places that
  directly manipulate struct siginfo under control, as it requires the
  introduction of struct kernel_siginfo for the in kernel things.

  Overall this set of changes looks like it is making good progress, and
  with a little luck I will be wrapping up the siginfo work next
  development cycle"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
  signal/sh: Stop gcc warning about an impossible case in do_divide_error
  signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
  signal/um: More carefully relay signals in relay_signal.
  signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
  signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
  signal/signalfd: Add support for SIGSYS
  signal/signalfd: Remove __put_user from signalfd_copyinfo
  signal/xtensa: Use force_sig_fault where appropriate
  signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
  signal/um: Use force_sig_fault where appropriate
  signal/sparc: Use force_sig_fault where appropriate
  signal/sparc: Use send_sig_fault where appropriate
  signal/sh: Use force_sig_fault where appropriate
  signal/s390: Use force_sig_fault where appropriate
  signal/riscv: Replace do_trap_siginfo with force_sig_fault
  signal/riscv: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_mceerr where appropriate
  signal/openrisc: Use force_sig_fault where appropriate
  signal/nios2: Use force_sig_fault where appropriate
  ...
2018-06-04 15:23:48 -07:00

264 lines
6.8 KiB
C

/*
* linux/arch/arm/kernel/swp_emulate.c
*
* Copyright (C) 2009 ARM Limited
* __user_* functions adapted from include/asm/uaccess.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Implements emulation of the SWP/SWPB instructions using load-exclusive and
* store-exclusive for processors that have them disabled (or future ones that
* might not implement them).
*
* Syntax of SWP{B} instruction: SWP{B}<c> <Rt>, <Rt2>, [<Rn>]
* Where: Rt = destination
* Rt2 = source
* Rn = address
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/sched.h>
#include <linux/sched/mm.h>
#include <linux/syscalls.h>
#include <linux/perf_event.h>
#include <asm/opcodes.h>
#include <asm/system_info.h>
#include <asm/traps.h>
#include <linux/uaccess.h>
/*
* Error-checking SWP macros implemented using ldrex{b}/strex{b}
*/
#define __user_swpX_asm(data, addr, res, temp, B) \
__asm__ __volatile__( \
"0: ldrex"B" %2, [%3]\n" \
"1: strex"B" %0, %1, [%3]\n" \
" cmp %0, #0\n" \
" moveq %1, %2\n" \
" movne %0, %4\n" \
"2:\n" \
" .section .text.fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %5\n" \
" b 2b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 0b, 3b\n" \
" .long 1b, 3b\n" \
" .previous" \
: "=&r" (res), "+r" (data), "=&r" (temp) \
: "r" (addr), "i" (-EAGAIN), "i" (-EFAULT) \
: "cc", "memory")
#define __user_swp_asm(data, addr, res, temp) \
__user_swpX_asm(data, addr, res, temp, "")
#define __user_swpb_asm(data, addr, res, temp) \
__user_swpX_asm(data, addr, res, temp, "b")
/*
* Macros/defines for extracting register numbers from instruction.
*/
#define EXTRACT_REG_NUM(instruction, offset) \
(((instruction) & (0xf << (offset))) >> (offset))
#define RN_OFFSET 16
#define RT_OFFSET 12
#define RT2_OFFSET 0
/*
* Bit 22 of the instruction encoding distinguishes between
* the SWP and SWPB variants (bit set means SWPB).
*/
#define TYPE_SWPB (1 << 22)
static unsigned long swpcounter;
static unsigned long swpbcounter;
static unsigned long abtcounter;
static pid_t previous_pid;
#ifdef CONFIG_PROC_FS
static int proc_status_show(struct seq_file *m, void *v)
{
seq_printf(m, "Emulated SWP:\t\t%lu\n", swpcounter);
seq_printf(m, "Emulated SWPB:\t\t%lu\n", swpbcounter);
seq_printf(m, "Aborted SWP{B}:\t\t%lu\n", abtcounter);
if (previous_pid != 0)
seq_printf(m, "Last process:\t\t%d\n", previous_pid);
return 0;
}
#endif
/*
* Set up process info to signal segmentation fault - called on access error.
*/
static void set_segfault(struct pt_regs *regs, unsigned long addr)
{
siginfo_t info;
clear_siginfo(&info);
down_read(&current->mm->mmap_sem);
if (find_vma(current->mm, addr) == NULL)
info.si_code = SEGV_MAPERR;
else
info.si_code = SEGV_ACCERR;
up_read(&current->mm->mmap_sem);
info.si_signo = SIGSEGV;
info.si_errno = 0;
info.si_addr = (void *) instruction_pointer(regs);
pr_debug("SWP{B} emulation: access caused memory abort!\n");
arm_notify_die("Illegal memory access", regs, &info, 0, 0);
abtcounter++;
}
static int emulate_swpX(unsigned int address, unsigned int *data,
unsigned int type)
{
unsigned int res = 0;
if ((type != TYPE_SWPB) && (address & 0x3)) {
/* SWP to unaligned address not permitted */
pr_debug("SWP instruction on unaligned pointer!\n");
return -EFAULT;
}
while (1) {
unsigned long temp;
unsigned int __ua_flags;
__ua_flags = uaccess_save_and_enable();
if (type == TYPE_SWPB)
__user_swpb_asm(*data, address, res, temp);
else
__user_swp_asm(*data, address, res, temp);
uaccess_restore(__ua_flags);
if (likely(res != -EAGAIN) || signal_pending(current))
break;
cond_resched();
}
if (res == 0) {
if (type == TYPE_SWPB)
swpbcounter++;
else
swpcounter++;
}
return res;
}
/*
* swp_handler logs the id of calling process, dissects the instruction, sanity
* checks the memory location, calls emulate_swpX for the actual operation and
* deals with fixup/error handling before returning
*/
static int swp_handler(struct pt_regs *regs, unsigned int instr)
{
unsigned int address, destreg, data, type;
unsigned int res = 0;
perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->ARM_pc);
res = arm_check_condition(instr, regs->ARM_cpsr);
switch (res) {
case ARM_OPCODE_CONDTEST_PASS:
break;
case ARM_OPCODE_CONDTEST_FAIL:
/* Condition failed - return to next instruction */
regs->ARM_pc += 4;
return 0;
case ARM_OPCODE_CONDTEST_UNCOND:
/* If unconditional encoding - not a SWP, undef */
return -EFAULT;
default:
return -EINVAL;
}
if (current->pid != previous_pid) {
pr_debug("\"%s\" (%ld) uses deprecated SWP{B} instruction\n",
current->comm, (unsigned long)current->pid);
previous_pid = current->pid;
}
address = regs->uregs[EXTRACT_REG_NUM(instr, RN_OFFSET)];
data = regs->uregs[EXTRACT_REG_NUM(instr, RT2_OFFSET)];
destreg = EXTRACT_REG_NUM(instr, RT_OFFSET);
type = instr & TYPE_SWPB;
pr_debug("addr in r%d->0x%08x, dest is r%d, source in r%d->0x%08x)\n",
EXTRACT_REG_NUM(instr, RN_OFFSET), address,
destreg, EXTRACT_REG_NUM(instr, RT2_OFFSET), data);
/* Check access in reasonable access range for both SWP and SWPB */
if (!access_ok(VERIFY_WRITE, (address & ~3), 4)) {
pr_debug("SWP{B} emulation: access to %p not allowed!\n",
(void *)address);
res = -EFAULT;
} else {
res = emulate_swpX(address, &data, type);
}
if (res == 0) {
/*
* On successful emulation, revert the adjustment to the PC
* made in kernel/traps.c in order to resume execution at the
* instruction following the SWP{B}.
*/
regs->ARM_pc += 4;
regs->uregs[destreg] = data;
} else if (res == -EFAULT) {
/*
* Memory errors do not mean emulation failed.
* Set up signal info to return SEGV, then return OK
*/
set_segfault(regs, address);
}
return 0;
}
/*
* Only emulate SWP/SWPB executed in ARM state/User mode.
* The kernel must be SWP free and SWP{B} does not exist in Thumb/ThumbEE.
*/
static struct undef_hook swp_hook = {
.instr_mask = 0x0fb00ff0,
.instr_val = 0x01000090,
.cpsr_mask = MODE_MASK | PSR_T_BIT | PSR_J_BIT,
.cpsr_val = USR_MODE,
.fn = swp_handler
};
/*
* Register handler and create status file in /proc/cpu
* Invoked as late_initcall, since not needed before init spawned.
*/
static int __init swp_emulation_init(void)
{
if (cpu_architecture() < CPU_ARCH_ARMv7)
return 0;
#ifdef CONFIG_PROC_FS
if (!proc_create_single("cpu/swp_emulation", S_IRUGO, NULL,
proc_status_show))
return -ENOMEM;
#endif /* CONFIG_PROC_FS */
pr_notice("Registering SWP/SWPB emulation handler\n");
register_undef_hook(&swp_hook);
return 0;
}
late_initcall(swp_emulation_init);