mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 07:09:15 +07:00
d85458256a
The RTL8366RB is an ASIC with five internal PHYs for LAN0..LAN3 and WAN. The PHYs are spawn off the main device so they can be handled in a distributed manner by the Realtek PHY driver. All that is really needed is the power save feature enablement and letting the PHY driver core pick up the IRQ from the switch chip. Cc: Antti Seppälä <a.seppala@gmail.com> Cc: Roman Yeryomin <roman@advem.lv> Cc: Colin Leitner <colin.leitner@googlemail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
321 lines
7.6 KiB
C
321 lines
7.6 KiB
C
/*
|
|
* drivers/net/phy/realtek.c
|
|
*
|
|
* Driver for Realtek PHYs
|
|
*
|
|
* Author: Johnson Leung <r58129@freescale.com>
|
|
*
|
|
* Copyright (c) 2004 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
#include <linux/bitops.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/module.h>
|
|
|
|
#define RTL821x_PHYSR 0x11
|
|
#define RTL821x_PHYSR_DUPLEX BIT(13)
|
|
#define RTL821x_PHYSR_SPEED GENMASK(15, 14)
|
|
|
|
#define RTL821x_INER 0x12
|
|
#define RTL8211B_INER_INIT 0x6400
|
|
#define RTL8211E_INER_LINK_STATUS BIT(10)
|
|
#define RTL8211F_INER_LINK_STATUS BIT(4)
|
|
|
|
#define RTL821x_INSR 0x13
|
|
|
|
#define RTL821x_PAGE_SELECT 0x1f
|
|
|
|
#define RTL8211F_INSR 0x1d
|
|
|
|
#define RTL8211F_TX_DELAY BIT(8)
|
|
|
|
#define RTL8201F_ISR 0x1e
|
|
#define RTL8201F_IER 0x13
|
|
|
|
#define RTL8366RB_POWER_SAVE 0x15
|
|
#define RTL8366RB_POWER_SAVE_ON BIT(12)
|
|
|
|
MODULE_DESCRIPTION("Realtek PHY driver");
|
|
MODULE_AUTHOR("Johnson Leung");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static int rtl821x_read_page(struct phy_device *phydev)
|
|
{
|
|
return __phy_read(phydev, RTL821x_PAGE_SELECT);
|
|
}
|
|
|
|
static int rtl821x_write_page(struct phy_device *phydev, int page)
|
|
{
|
|
return __phy_write(phydev, RTL821x_PAGE_SELECT, page);
|
|
}
|
|
|
|
static int rtl8201_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_read(phydev, RTL8201F_ISR);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
static int rtl821x_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_read(phydev, RTL821x_INSR);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
static int rtl8211f_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_read_paged(phydev, 0xa43, RTL8211F_INSR);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
static int rtl8201_config_intr(struct phy_device *phydev)
|
|
{
|
|
u16 val;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
val = BIT(13) | BIT(12) | BIT(11);
|
|
else
|
|
val = 0;
|
|
|
|
return phy_write_paged(phydev, 0x7, RTL8201F_IER, val);
|
|
}
|
|
|
|
static int rtl8211b_config_intr(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
err = phy_write(phydev, RTL821x_INER,
|
|
RTL8211B_INER_INIT);
|
|
else
|
|
err = phy_write(phydev, RTL821x_INER, 0);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int rtl8211e_config_intr(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
err = phy_write(phydev, RTL821x_INER,
|
|
RTL8211E_INER_LINK_STATUS);
|
|
else
|
|
err = phy_write(phydev, RTL821x_INER, 0);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int rtl8211f_config_intr(struct phy_device *phydev)
|
|
{
|
|
u16 val;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
val = RTL8211F_INER_LINK_STATUS;
|
|
else
|
|
val = 0;
|
|
|
|
return phy_write_paged(phydev, 0xa42, RTL821x_INER, val);
|
|
}
|
|
|
|
static int rtl8211_config_aneg(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = genphy_config_aneg(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Quirk was copied from vendor driver. Unfortunately it includes no
|
|
* description of the magic numbers.
|
|
*/
|
|
if (phydev->speed == SPEED_100 && phydev->autoneg == AUTONEG_DISABLE) {
|
|
phy_write(phydev, 0x17, 0x2138);
|
|
phy_write(phydev, 0x0e, 0x0260);
|
|
} else {
|
|
phy_write(phydev, 0x17, 0x2108);
|
|
phy_write(phydev, 0x0e, 0x0000);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8211c_config_init(struct phy_device *phydev)
|
|
{
|
|
/* RTL8211C has an issue when operating in Gigabit slave mode */
|
|
phy_set_bits(phydev, MII_CTRL1000,
|
|
CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
|
|
|
|
return genphy_config_init(phydev);
|
|
}
|
|
|
|
static int rtl8211f_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
u16 val = 0;
|
|
|
|
ret = genphy_config_init(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
|
|
val = RTL8211F_TX_DELAY;
|
|
|
|
return phy_modify_paged(phydev, 0xd08, 0x11, RTL8211F_TX_DELAY, val);
|
|
}
|
|
|
|
static int rtl8211b_suspend(struct phy_device *phydev)
|
|
{
|
|
phy_write(phydev, MII_MMD_DATA, BIT(9));
|
|
|
|
return genphy_suspend(phydev);
|
|
}
|
|
|
|
static int rtl8211b_resume(struct phy_device *phydev)
|
|
{
|
|
phy_write(phydev, MII_MMD_DATA, 0);
|
|
|
|
return genphy_resume(phydev);
|
|
}
|
|
|
|
static int rtl8366rb_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = genphy_config_init(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = phy_set_bits(phydev, RTL8366RB_POWER_SAVE,
|
|
RTL8366RB_POWER_SAVE_ON);
|
|
if (ret) {
|
|
dev_err(&phydev->mdio.dev,
|
|
"error enabling power management\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct phy_driver realtek_drvs[] = {
|
|
{
|
|
.phy_id = 0x00008201,
|
|
.name = "RTL8201CP Ethernet",
|
|
.phy_id_mask = 0x0000ffff,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
}, {
|
|
.phy_id = 0x001cc816,
|
|
.name = "RTL8201F 10/100Mbps Ethernet",
|
|
.phy_id_mask = 0x001fffff,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.ack_interrupt = &rtl8201_ack_interrupt,
|
|
.config_intr = &rtl8201_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.read_page = rtl821x_read_page,
|
|
.write_page = rtl821x_write_page,
|
|
}, {
|
|
.phy_id = 0x001cc910,
|
|
.name = "RTL8211 Gigabit Ethernet",
|
|
.phy_id_mask = 0x001fffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config_aneg = rtl8211_config_aneg,
|
|
.read_mmd = &genphy_read_mmd_unsupported,
|
|
.write_mmd = &genphy_write_mmd_unsupported,
|
|
}, {
|
|
.phy_id = 0x001cc912,
|
|
.name = "RTL8211B Gigabit Ethernet",
|
|
.phy_id_mask = 0x001fffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.ack_interrupt = &rtl821x_ack_interrupt,
|
|
.config_intr = &rtl8211b_config_intr,
|
|
.read_mmd = &genphy_read_mmd_unsupported,
|
|
.write_mmd = &genphy_write_mmd_unsupported,
|
|
.suspend = rtl8211b_suspend,
|
|
.resume = rtl8211b_resume,
|
|
}, {
|
|
.phy_id = 0x001cc913,
|
|
.name = "RTL8211C Gigabit Ethernet",
|
|
.phy_id_mask = 0x001fffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config_init = rtl8211c_config_init,
|
|
.read_mmd = &genphy_read_mmd_unsupported,
|
|
.write_mmd = &genphy_write_mmd_unsupported,
|
|
}, {
|
|
.phy_id = 0x001cc914,
|
|
.name = "RTL8211DN Gigabit Ethernet",
|
|
.phy_id_mask = 0x001fffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.ack_interrupt = rtl821x_ack_interrupt,
|
|
.config_intr = rtl8211e_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = 0x001cc915,
|
|
.name = "RTL8211E Gigabit Ethernet",
|
|
.phy_id_mask = 0x001fffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.ack_interrupt = &rtl821x_ack_interrupt,
|
|
.config_intr = &rtl8211e_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = 0x001cc916,
|
|
.name = "RTL8211F Gigabit Ethernet",
|
|
.phy_id_mask = 0x001fffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_init = &rtl8211f_config_init,
|
|
.ack_interrupt = &rtl8211f_ack_interrupt,
|
|
.config_intr = &rtl8211f_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.read_page = rtl821x_read_page,
|
|
.write_page = rtl821x_write_page,
|
|
}, {
|
|
.phy_id = 0x001cc961,
|
|
.name = "RTL8366RB Gigabit Ethernet",
|
|
.phy_id_mask = 0x001fffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_init = &rtl8366rb_config_init,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
},
|
|
};
|
|
|
|
module_phy_driver(realtek_drvs);
|
|
|
|
static struct mdio_device_id __maybe_unused realtek_tbl[] = {
|
|
{ 0x001cc816, 0x001fffff },
|
|
{ 0x001cc910, 0x001fffff },
|
|
{ 0x001cc912, 0x001fffff },
|
|
{ 0x001cc913, 0x001fffff },
|
|
{ 0x001cc914, 0x001fffff },
|
|
{ 0x001cc915, 0x001fffff },
|
|
{ 0x001cc916, 0x001fffff },
|
|
{ 0x001cc961, 0x001fffff },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, realtek_tbl);
|