mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 07:06:59 +07:00
8318d78a44
This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
152 lines
3.6 KiB
C
152 lines
3.6 KiB
C
#ifndef RTL8180_H
|
|
#define RTL8180_H
|
|
|
|
#include "rtl818x.h"
|
|
|
|
#define MAX_RX_SIZE IEEE80211_MAX_RTS_THRESHOLD
|
|
|
|
#define RF_PARAM_ANALOGPHY (1 << 0)
|
|
#define RF_PARAM_ANTBDEFAULT (1 << 1)
|
|
#define RF_PARAM_CARRIERSENSE1 (1 << 2)
|
|
#define RF_PARAM_CARRIERSENSE2 (1 << 3)
|
|
|
|
#define BB_ANTATTEN_CHAN14 0x0C
|
|
#define BB_ANTENNA_B 0x40
|
|
|
|
#define BB_HOST_BANG (1 << 30)
|
|
#define BB_HOST_BANG_EN (1 << 2)
|
|
#define BB_HOST_BANG_CLK (1 << 1)
|
|
#define BB_HOST_BANG_DATA 1
|
|
|
|
#define ANAPARAM_TXDACOFF_SHIFT 27
|
|
#define ANAPARAM_PWR0_SHIFT 28
|
|
#define ANAPARAM_PWR0_MASK (0x07 << ANAPARAM_PWR0_SHIFT)
|
|
#define ANAPARAM_PWR1_SHIFT 20
|
|
#define ANAPARAM_PWR1_MASK (0x7F << ANAPARAM_PWR1_SHIFT)
|
|
|
|
enum rtl8180_tx_desc_flags {
|
|
RTL8180_TX_DESC_FLAG_NO_ENC = (1 << 15),
|
|
RTL8180_TX_DESC_FLAG_TX_OK = (1 << 15),
|
|
RTL8180_TX_DESC_FLAG_SPLCP = (1 << 16),
|
|
RTL8180_TX_DESC_FLAG_RX_UNDER = (1 << 16),
|
|
RTL8180_TX_DESC_FLAG_MOREFRAG = (1 << 17),
|
|
RTL8180_TX_DESC_FLAG_CTS = (1 << 18),
|
|
RTL8180_TX_DESC_FLAG_RTS = (1 << 23),
|
|
RTL8180_TX_DESC_FLAG_LS = (1 << 28),
|
|
RTL8180_TX_DESC_FLAG_FS = (1 << 29),
|
|
RTL8180_TX_DESC_FLAG_DMA = (1 << 30),
|
|
RTL8180_TX_DESC_FLAG_OWN = (1 << 31)
|
|
};
|
|
|
|
struct rtl8180_tx_desc {
|
|
__le32 flags;
|
|
__le16 rts_duration;
|
|
__le16 plcp_len;
|
|
__le32 tx_buf;
|
|
__le32 frame_len;
|
|
__le32 next_tx_desc;
|
|
u8 cw;
|
|
u8 retry_limit;
|
|
u8 agc;
|
|
u8 flags2;
|
|
u32 reserved[2];
|
|
} __attribute__ ((packed));
|
|
|
|
enum rtl8180_rx_desc_flags {
|
|
RTL8180_RX_DESC_FLAG_ICV_ERR = (1 << 12),
|
|
RTL8180_RX_DESC_FLAG_CRC32_ERR = (1 << 13),
|
|
RTL8180_RX_DESC_FLAG_PM = (1 << 14),
|
|
RTL8180_RX_DESC_FLAG_RX_ERR = (1 << 15),
|
|
RTL8180_RX_DESC_FLAG_BCAST = (1 << 16),
|
|
RTL8180_RX_DESC_FLAG_PAM = (1 << 17),
|
|
RTL8180_RX_DESC_FLAG_MCAST = (1 << 18),
|
|
RTL8180_RX_DESC_FLAG_SPLCP = (1 << 25),
|
|
RTL8180_RX_DESC_FLAG_FOF = (1 << 26),
|
|
RTL8180_RX_DESC_FLAG_DMA_FAIL = (1 << 27),
|
|
RTL8180_RX_DESC_FLAG_LS = (1 << 28),
|
|
RTL8180_RX_DESC_FLAG_FS = (1 << 29),
|
|
RTL8180_RX_DESC_FLAG_EOR = (1 << 30),
|
|
RTL8180_RX_DESC_FLAG_OWN = (1 << 31)
|
|
};
|
|
|
|
struct rtl8180_rx_desc {
|
|
__le32 flags;
|
|
__le32 flags2;
|
|
union {
|
|
__le32 rx_buf;
|
|
__le64 tsft;
|
|
};
|
|
} __attribute__ ((packed));
|
|
|
|
struct rtl8180_tx_ring {
|
|
struct rtl8180_tx_desc *desc;
|
|
dma_addr_t dma;
|
|
unsigned int idx;
|
|
unsigned int entries;
|
|
struct sk_buff_head queue;
|
|
};
|
|
|
|
struct rtl8180_priv {
|
|
/* common between rtl818x drivers */
|
|
struct rtl818x_csr __iomem *map;
|
|
const struct rtl818x_rf_ops *rf;
|
|
struct ieee80211_vif *vif;
|
|
int mode;
|
|
|
|
/* rtl8180 driver specific */
|
|
spinlock_t lock;
|
|
struct rtl8180_rx_desc *rx_ring;
|
|
dma_addr_t rx_ring_dma;
|
|
unsigned int rx_idx;
|
|
struct sk_buff *rx_buf[32];
|
|
struct rtl8180_tx_ring tx_ring[4];
|
|
struct ieee80211_channel channels[14];
|
|
struct ieee80211_rate rates[12];
|
|
struct ieee80211_supported_band band;
|
|
struct pci_dev *pdev;
|
|
u32 rx_conf;
|
|
|
|
int r8185;
|
|
u32 anaparam;
|
|
u16 rfparam;
|
|
u8 csthreshold;
|
|
};
|
|
|
|
void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
|
|
void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam);
|
|
|
|
static inline u8 rtl818x_ioread8(struct rtl8180_priv *priv, u8 __iomem *addr)
|
|
{
|
|
return ioread8(addr);
|
|
}
|
|
|
|
static inline u16 rtl818x_ioread16(struct rtl8180_priv *priv, __le16 __iomem *addr)
|
|
{
|
|
return ioread16(addr);
|
|
}
|
|
|
|
static inline u32 rtl818x_ioread32(struct rtl8180_priv *priv, __le32 __iomem *addr)
|
|
{
|
|
return ioread32(addr);
|
|
}
|
|
|
|
static inline void rtl818x_iowrite8(struct rtl8180_priv *priv,
|
|
u8 __iomem *addr, u8 val)
|
|
{
|
|
iowrite8(val, addr);
|
|
}
|
|
|
|
static inline void rtl818x_iowrite16(struct rtl8180_priv *priv,
|
|
__le16 __iomem *addr, u16 val)
|
|
{
|
|
iowrite16(val, addr);
|
|
}
|
|
|
|
static inline void rtl818x_iowrite32(struct rtl8180_priv *priv,
|
|
__le32 __iomem *addr, u32 val)
|
|
{
|
|
iowrite32(val, addr);
|
|
}
|
|
|
|
#endif /* RTL8180_H */
|