mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
11ca58727e
Some SoCs (like i.MX53) need to specify the SRAM clock in the device tree via the clocks property. Add an entry to the optional property section. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
81 lines
2.4 KiB
Plaintext
81 lines
2.4 KiB
Plaintext
Generic on-chip SRAM
|
|
|
|
Simple IO memory regions to be managed by the genalloc API.
|
|
|
|
Required properties:
|
|
|
|
- compatible : mmio-sram or atmel,sama5d2-securam
|
|
|
|
- reg : SRAM iomem address range
|
|
|
|
Reserving sram areas:
|
|
---------------------
|
|
|
|
Each child of the sram node specifies a region of reserved memory. Each
|
|
child node should use a 'reg' property to specify a specific range of
|
|
reserved memory.
|
|
|
|
Following the generic-names recommended practice, node names should
|
|
reflect the purpose of the node. Unit address (@<address>) should be
|
|
appended to the name.
|
|
|
|
Required properties in the sram node:
|
|
|
|
- #address-cells, #size-cells : should use the same values as the root node
|
|
- ranges : standard definition, should translate from local addresses
|
|
within the sram to bus addresses
|
|
|
|
Optional properties in the sram node:
|
|
|
|
- no-memory-wc : the flag indicating, that SRAM memory region has not to
|
|
be remapped as write combining. WC is used by default.
|
|
|
|
Required properties in the area nodes:
|
|
|
|
- reg : iomem address range, relative to the SRAM range
|
|
|
|
Optional properties in the area nodes:
|
|
|
|
- compatible : standard definition, should contain a vendor specific string
|
|
in the form <vendor>,[<device>-]<usage>
|
|
- pool : indicates that the particular reserved SRAM area is addressable
|
|
and in use by another device or devices
|
|
- export : indicates that the reserved SRAM area may be accessed outside
|
|
of the kernel, e.g. by bootloader or userspace
|
|
- protect-exec : Same as 'pool' above but with the additional
|
|
constraint that code wil be run from the region and
|
|
that the memory is maintained as read-only, executable
|
|
during code execution. NOTE: This region must be page
|
|
aligned on start and end in order to properly allow
|
|
manipulation of the page attributes.
|
|
- label : the name for the reserved partition, if omitted, the label
|
|
is taken from the node name excluding the unit address.
|
|
- clocks : a list of phandle and clock specifier pair that controls the
|
|
single SRAM clock.
|
|
|
|
Example:
|
|
|
|
sram: sram@5c000000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x5c000000 0x40000>;
|
|
|
|
smp-sram@100 {
|
|
compatible = "socvendor,smp-sram";
|
|
reg = <0x100 0x50>;
|
|
};
|
|
|
|
device-sram@1000 {
|
|
reg = <0x1000 0x1000>;
|
|
pool;
|
|
};
|
|
|
|
exported@20000 {
|
|
reg = <0x20000 0x20000>;
|
|
export;
|
|
};
|
|
};
|