mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-16 22:26:40 +07:00
1a2a76c268
- Ensure that the PIT is set up when the local APIC is disable or
configured in legacy mode. This is caused by an ordering issue
introduced in the recent changes which skip PIT initialization when the
TSC and APIC frequencies are already known.
- Handle malformed SRAT tables during early ACPI parsing which caused an
infinite loop anda boot hang.
- Fix a long standing race in the affinity setting code which affects PCI
devices with non-maskable MSI interrupts. The problem is caused by the
non-atomic writes of the MSI address (destination APIC id) and data
(vector) fields which the device uses to construct the MSI message. The
non-atomic writes are mandated by PCI.
If both fields change and the device raises an interrupt after writing
address and before writing data, then the MSI block constructs a
inconsistent message which causes interrupts to be lost and subsequent
malfunction of the device.
The fix is to redirect the interrupt to the new vector on the current
CPU first and then switch it over to the new target CPU. This allows to
observe an eventually raised interrupt in the transitional stage (old
CPU, new vector) to be observed in the APIC IRR and retriggered on the
new target CPU and the new vector. The potential spurious interrupts
caused by this are harmless and can in the worst case expose a buggy
driver (all handlers have to be able to deal with spurious interrupts as
they can and do happen for various reasons).
- Add the missing suspend/resume mechanism for the HYPERV hypercall page
which prevents resume hibernation on HYPERV guests. This change got
lost before the merge window.
- Mask the IOAPIC before disabling the local APIC to prevent potentially
stale IOAPIC remote IRR bits which cause stale interrupt lines after
resume.
-----BEGIN PGP SIGNATURE-----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=WxKD
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for X86:
- Ensure that the PIT is set up when the local APIC is disable or
configured in legacy mode. This is caused by an ordering issue
introduced in the recent changes which skip PIT initialization when
the TSC and APIC frequencies are already known.
- Handle malformed SRAT tables during early ACPI parsing which caused
an infinite loop anda boot hang.
- Fix a long standing race in the affinity setting code which affects
PCI devices with non-maskable MSI interrupts. The problem is caused
by the non-atomic writes of the MSI address (destination APIC id)
and data (vector) fields which the device uses to construct the MSI
message. The non-atomic writes are mandated by PCI.
If both fields change and the device raises an interrupt after
writing address and before writing data, then the MSI block
constructs a inconsistent message which causes interrupts to be
lost and subsequent malfunction of the device.
The fix is to redirect the interrupt to the new vector on the
current CPU first and then switch it over to the new target CPU.
This allows to observe an eventually raised interrupt in the
transitional stage (old CPU, new vector) to be observed in the APIC
IRR and retriggered on the new target CPU and the new vector.
The potential spurious interrupts caused by this are harmless and
can in the worst case expose a buggy driver (all handlers have to
be able to deal with spurious interrupts as they can and do happen
for various reasons).
- Add the missing suspend/resume mechanism for the HYPERV hypercall
page which prevents resume hibernation on HYPERV guests. This
change got lost before the merge window.
- Mask the IOAPIC before disabling the local APIC to prevent
potentially stale IOAPIC remote IRR bits which cause stale
interrupt lines after resume"
* tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Mask IOAPIC entries when disabling the local APIC
x86/hyperv: Suspend/resume the hypercall page for hibernation
x86/apic/msi: Plug non-maskable MSI affinity race
x86/boot: Handle malformed SRAT tables during early ACPI parsing
x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode
|
||
|---|---|---|
| .. | ||
| acpi | ||
| apic | ||
| cpu | ||
| fpu | ||
| kprobes | ||
| .gitignore | ||
| alternative.c | ||
| amd_gart_64.c | ||
| amd_nb.c | ||
| apb_timer.c | ||
| aperture_64.c | ||
| apm_32.c | ||
| asm-offsets_32.c | ||
| asm-offsets_64.c | ||
| asm-offsets.c | ||
| audit_64.c | ||
| bootflag.c | ||
| check.c | ||
| cpuid.c | ||
| crash_core_32.c | ||
| crash_core_64.c | ||
| crash_dump_32.c | ||
| crash_dump_64.c | ||
| crash.c | ||
| devicetree.c | ||
| doublefault_32.c | ||
| dumpstack_32.c | ||
| dumpstack_64.c | ||
| dumpstack.c | ||
| e820.c | ||
| early_printk.c | ||
| early-quirks.c | ||
| ebda.c | ||
| eisa.c | ||
| espfix_64.c | ||
| ftrace_32.S | ||
| ftrace_64.S | ||
| ftrace.c | ||
| head32.c | ||
| head64.c | ||
| head_32.S | ||
| head_64.S | ||
| hpet.c | ||
| hw_breakpoint.c | ||
| i8237.c | ||
| i8253.c | ||
| i8259.c | ||
| idt.c | ||
| ima_arch.c | ||
| io_delay.c | ||
| ioport.c | ||
| irq_32.c | ||
| irq_64.c | ||
| irq_work.c | ||
| irq.c | ||
| irqflags.S | ||
| irqinit.c | ||
| itmt.c | ||
| jailhouse.c | ||
| jump_label.c | ||
| kdebugfs.c | ||
| kexec-bzimage64.c | ||
| kgdb.c | ||
| ksysfs.c | ||
| kvm.c | ||
| kvmclock.c | ||
| ldt.c | ||
| livepatch.c | ||
| machine_kexec_32.c | ||
| machine_kexec_64.c | ||
| Makefile | ||
| mmconf-fam10h_64.c | ||
| module.c | ||
| mpparse.c | ||
| msr.c | ||
| nmi_selftest.c | ||
| nmi.c | ||
| paravirt_patch.c | ||
| paravirt-spinlocks.c | ||
| paravirt.c | ||
| pci-dma.c | ||
| pci-iommu_table.c | ||
| pci-swiotlb.c | ||
| pcspeaker.c | ||
| perf_regs.c | ||
| platform-quirks.c | ||
| pmem.c | ||
| probe_roms.c | ||
| process_32.c | ||
| process_64.c | ||
| process.c | ||
| process.h | ||
| ptrace.c | ||
| pvclock.c | ||
| quirks.c | ||
| reboot_fixups_32.c | ||
| reboot.c | ||
| relocate_kernel_32.S | ||
| relocate_kernel_64.S | ||
| resource.c | ||
| rtc.c | ||
| setup_percpu.c | ||
| setup.c | ||
| signal_compat.c | ||
| signal.c | ||
| smp.c | ||
| smpboot.c | ||
| stacktrace.c | ||
| step.c | ||
| sys_x86_64.c | ||
| sysfb_efi.c | ||
| sysfb_simplefb.c | ||
| sysfb.c | ||
| tboot.c | ||
| time.c | ||
| tls.c | ||
| tls.h | ||
| topology.c | ||
| trace_clock.c | ||
| tracepoint.c | ||
| traps.c | ||
| tsc_msr.c | ||
| tsc_sync.c | ||
| tsc.c | ||
| umip.c | ||
| unwind_frame.c | ||
| unwind_guess.c | ||
| unwind_orc.c | ||
| uprobes.c | ||
| verify_cpu.S | ||
| vm86_32.c | ||
| vmlinux.lds.S | ||
| vsmp_64.c | ||
| x86_init.c | ||