mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 09:56:40 +07:00
d56ac1929c
Add the IOMUX setting for the IR input, rather than relying on the boot loader. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
201 lines
4.3 KiB
Plaintext
201 lines
4.3 KiB
Plaintext
/*
|
|
* Copyright (C) 2013,2014 Russell King
|
|
*/
|
|
#include "imx6qdl-microsom.dtsi"
|
|
#include "imx6qdl-microsom-ar8035.dtsi"
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
ir_recv: ir-receiver {
|
|
compatible = "gpio-ir-receiver";
|
|
gpios = <&gpio3 5 1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
|
|
reg_3p3v: 3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3P3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_usbh1_vbus: usb-h1-vbus {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio1 0 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
|
|
regulator-name = "usb_h1_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
reg_usbotg_vbus: usb-otg-vbus {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio3 22 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
|
|
regulator-name = "usb_otg_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
};
|
|
|
|
sound-spdif {
|
|
compatible = "fsl,imx-audio-spdif";
|
|
model = "On-board SPDIF";
|
|
/* IMX6 doesn't implement this yet */
|
|
spdif-controller = <&spdif>;
|
|
spdif-out;
|
|
};
|
|
};
|
|
|
|
&can1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
|
|
ddc-i2c-bus = <&i2c2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
|
|
|
|
/*
|
|
* Not fitted on Carrier-1 board... yet
|
|
status = "okay";
|
|
|
|
rtc: pcf8523@68 {
|
|
compatible = "nxp,pcf8523";
|
|
reg = <0x68>;
|
|
};
|
|
*/
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
hummingboard {
|
|
pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
|
|
MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_hummingboard_hdmi: hummingboard-hdmi {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_hummingboard_i2c2: hummingboard-i2c2 {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_hummingboard_spdif: hummingboard-spdif {
|
|
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
|
|
};
|
|
|
|
pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
|
|
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
|
|
};
|
|
|
|
pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
|
|
/*
|
|
* Similar to pinctrl_usbotg_2, but we want it
|
|
* pulled down for a fixed host connection.
|
|
*/
|
|
fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
|
|
};
|
|
|
|
pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
|
|
fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
|
|
};
|
|
|
|
pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
|
|
>;
|
|
};
|
|
|
|
pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
|
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
|
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
|
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
|
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
|
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&spdif {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hummingboard_spdif>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
disable-over-current;
|
|
vbus-supply = <®_usbh1_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
disable-over-current;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
|
|
vbus-supply = <®_usbotg_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <
|
|
&pinctrl_hummingboard_usdhc2_aux
|
|
&pinctrl_hummingboard_usdhc2
|
|
>;
|
|
vmmc-supply = <®_3p3v>;
|
|
cd-gpios = <&gpio1 4 0>;
|
|
status = "okay";
|
|
};
|