AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-24 22:40:53 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
3ffbe35321
linux_dsm_epyc7002/drivers/gpu/drm/bridge/tc358764.c
Pankaj Bharadiya ff1f62d35b drm: Remove drm_fb_helper add, add all and remove connector calls 
drm_fb_helper_{add,remove}_one_connector() and
drm_fb_helper_single_add_all_connectors() are dummy functions now
and serve no purpose. Hence remove their calls.

This is the preparatory step for removing the
drm_fb_helper_{add,remove}_one_connector() functions from
drm_fb_helper.h

This removal is done using below sementic patch and unused variable
compilation warnings are fixed manually.

@@
@@

- drm_fb_helper_single_add_all_connectors(...);

@@
expression e1;
statement S;
@@
- e1 = drm_fb_helper_single_add_all_connectors(...);
- S

@@
@@

- drm_fb_helper_add_one_connector(...);

@@
@@

- drm_fb_helper_remove_one_connector(...);

Changes since v1:
* Squashed warning fixes into the patch that introduced the
  warnings (into 5/7) (Laurent, Emil, Lyude)

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-6-pankaj.laxminarayan.bharadiya@intel.com
2020-03-06 14:19:58 +01:00

508 lines
14 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018 Samsung Electronics Co., Ltd
*
* Authors:
* Andrzej Hajda <a.hajda@samsung.com>
* Maciej Purski <m.purski@samsung.com>
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of_graph.h>
#include <linux/regulator/consumer.h>
#include <video/mipi_display.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
#include <drm/drm_crtc.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_of.h>
#include <drm/drm_panel.h>
#include <drm/drm_print.h>
#include <drm/drm_probe_helper.h>
#define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end))
#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end))
/* PPI layer registers */
#define PPI_STARTPPI 0x0104 /* START control bit */
#define PPI_LPTXTIMECNT 0x0114 /* LPTX timing signal */
#define PPI_LANEENABLE 0x0134 /* Enables each lane */
#define PPI_TX_RX_TA 0x013C /* BTA timing parameters */
#define PPI_D0S_CLRSIPOCOUNT 0x0164 /* Assertion timer for Lane 0 */
#define PPI_D1S_CLRSIPOCOUNT 0x0168 /* Assertion timer for Lane 1 */
#define PPI_D2S_CLRSIPOCOUNT 0x016C /* Assertion timer for Lane 2 */
#define PPI_D3S_CLRSIPOCOUNT 0x0170 /* Assertion timer for Lane 3 */
#define PPI_START_FUNCTION 1
/* DSI layer registers */
#define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX */
#define DSI_LANEENABLE 0x0210 /* Enables each lane */
#define DSI_RX_START 1
/* Video path registers */
#define VP_CTRL 0x0450 /* Video Path Control */
#define VP_CTRL_MSF(v) FLD_VAL(v, 0, 0) /* Magic square in RGB666 */
#define VP_CTRL_VTGEN(v) FLD_VAL(v, 4, 4) /* Use chip clock for timing */
#define VP_CTRL_EVTMODE(v) FLD_VAL(v, 5, 5) /* Event mode */
#define VP_CTRL_RGB888(v) FLD_VAL(v, 8, 8) /* RGB888 mode */
#define VP_CTRL_VSDELAY(v) FLD_VAL(v, 31, 20) /* VSYNC delay */
#define VP_CTRL_HSPOL BIT(17) /* Polarity of HSYNC signal */
#define VP_CTRL_DEPOL BIT(18) /* Polarity of DE signal */
#define VP_CTRL_VSPOL BIT(19) /* Polarity of VSYNC signal */
#define VP_HTIM1 0x0454 /* Horizontal Timing Control 1 */
#define VP_HTIM1_HBP(v) FLD_VAL(v, 24, 16)
#define VP_HTIM1_HSYNC(v) FLD_VAL(v, 8, 0)
#define VP_HTIM2 0x0458 /* Horizontal Timing Control 2 */
#define VP_HTIM2_HFP(v) FLD_VAL(v, 24, 16)
#define VP_HTIM2_HACT(v) FLD_VAL(v, 10, 0)
#define VP_VTIM1 0x045C /* Vertical Timing Control 1 */
#define VP_VTIM1_VBP(v) FLD_VAL(v, 23, 16)
#define VP_VTIM1_VSYNC(v) FLD_VAL(v, 7, 0)
#define VP_VTIM2 0x0460 /* Vertical Timing Control 2 */
#define VP_VTIM2_VFP(v) FLD_VAL(v, 23, 16)
#define VP_VTIM2_VACT(v) FLD_VAL(v, 10, 0)
#define VP_VFUEN 0x0464 /* Video Frame Timing Update Enable */
/* LVDS registers */
#define LV_MX0003 0x0480 /* Mux input bit 0 to 3 */
#define LV_MX0407 0x0484 /* Mux input bit 4 to 7 */
#define LV_MX0811 0x0488 /* Mux input bit 8 to 11 */
#define LV_MX1215 0x048C /* Mux input bit 12 to 15 */
#define LV_MX1619 0x0490 /* Mux input bit 16 to 19 */
#define LV_MX2023 0x0494 /* Mux input bit 20 to 23 */
#define LV_MX2427 0x0498 /* Mux input bit 24 to 27 */
#define LV_MX(b0, b1, b2, b3) (FLD_VAL(b0, 4, 0) | FLD_VAL(b1, 12, 8) | \
FLD_VAL(b2, 20, 16) | FLD_VAL(b3, 28, 24))
/* Input bit numbers used in mux registers */
enum {
LVI_R0,
LVI_R1,
LVI_R2,
LVI_R3,
LVI_R4,
LVI_R5,
LVI_R6,
LVI_R7,
LVI_G0,
LVI_G1,
LVI_G2,
LVI_G3,
LVI_G4,
LVI_G5,
LVI_G6,
LVI_G7,
LVI_B0,
LVI_B1,
LVI_B2,
LVI_B3,
LVI_B4,
LVI_B5,
LVI_B6,
LVI_B7,
LVI_HS,
LVI_VS,
LVI_DE,
LVI_L0
};
#define LV_CFG 0x049C /* LVDS Configuration */
#define LV_PHY0 0x04A0 /* LVDS PHY 0 */
#define LV_PHY0_RST(v) FLD_VAL(v, 22, 22) /* PHY reset */
#define LV_PHY0_IS(v) FLD_VAL(v, 15, 14)
#define LV_PHY0_ND(v) FLD_VAL(v, 4, 0) /* Frequency range select */
#define LV_PHY0_PRBS_ON(v) FLD_VAL(v, 20, 16) /* Clock/Data Flag pins */
/* System registers */
#define SYS_RST 0x0504 /* System Reset */
#define SYS_ID 0x0580 /* System ID */
#define SYS_RST_I2CS BIT(0) /* Reset I2C-Slave controller */
#define SYS_RST_I2CM BIT(1) /* Reset I2C-Master controller */
#define SYS_RST_LCD BIT(2) /* Reset LCD controller */
#define SYS_RST_BM BIT(3) /* Reset Bus Management controller */
#define SYS_RST_DSIRX BIT(4) /* Reset DSI-RX and App controller */
#define SYS_RST_REG BIT(5) /* Reset Register module */
#define LPX_PERIOD 2
#define TTA_SURE 3
#define TTA_GET 0x20000
/* Lane enable PPI and DSI register bits */
#define LANEENABLE_CLEN BIT(0)
#define LANEENABLE_L0EN BIT(1)
#define LANEENABLE_L1EN BIT(2)
#define LANEENABLE_L2EN BIT(3)
#define LANEENABLE_L3EN BIT(4)
/* LVCFG fields */
#define LV_CFG_LVEN BIT(0)
#define LV_CFG_LVDLINK BIT(1)
#define LV_CFG_CLKPOL1 BIT(2)
#define LV_CFG_CLKPOL2 BIT(3)
static const char * const tc358764_supplies[] = {
"vddc", "vddio", "vddlvds"
};
struct tc358764 {
struct device *dev;
struct drm_bridge bridge;
struct drm_connector connector;
struct regulator_bulk_data supplies[ARRAY_SIZE(tc358764_supplies)];
struct gpio_desc *gpio_reset;
struct drm_panel *panel;
int error;
};
static int tc358764_clear_error(struct tc358764 *ctx)
{
int ret = ctx->error;
ctx->error = 0;
return ret;
}
static void tc358764_read(struct tc358764 *ctx, u16 addr, u32 *val)
{
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
ssize_t ret;
if (ctx->error)
return;
cpu_to_le16s(&addr);
ret = mipi_dsi_generic_read(dsi, &addr, sizeof(addr), val, sizeof(*val));
if (ret >= 0)
le32_to_cpus(val);
dev_dbg(ctx->dev, "read: %d, addr: %d\n", addr, *val);
}
static void tc358764_write(struct tc358764 *ctx, u16 addr, u32 val)
{
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
ssize_t ret;
u8 data[6];
if (ctx->error)
return;
data[0] = addr;
data[1] = addr >> 8;
data[2] = val;
data[3] = val >> 8;
data[4] = val >> 16;
data[5] = val >> 24;
ret = mipi_dsi_generic_write(dsi, data, sizeof(data));
if (ret < 0)
ctx->error = ret;
}
static inline struct tc358764 *bridge_to_tc358764(struct drm_bridge *bridge)
{
return container_of(bridge, struct tc358764, bridge);
}
static inline
struct tc358764 *connector_to_tc358764(struct drm_connector *connector)
{
return container_of(connector, struct tc358764, connector);
}
static int tc358764_init(struct tc358764 *ctx)
{
u32 v = 0;
tc358764_read(ctx, SYS_ID, &v);
if (ctx->error)
return tc358764_clear_error(ctx);
dev_info(ctx->dev, "ID: %#x\n", v);
/* configure PPI counters */
tc358764_write(ctx, PPI_TX_RX_TA, TTA_GET | TTA_SURE);
tc358764_write(ctx, PPI_LPTXTIMECNT, LPX_PERIOD);
tc358764_write(ctx, PPI_D0S_CLRSIPOCOUNT, 5);
tc358764_write(ctx, PPI_D1S_CLRSIPOCOUNT, 5);
tc358764_write(ctx, PPI_D2S_CLRSIPOCOUNT, 5);
tc358764_write(ctx, PPI_D3S_CLRSIPOCOUNT, 5);
/* enable four data lanes and clock lane */
tc358764_write(ctx, PPI_LANEENABLE, LANEENABLE_L3EN | LANEENABLE_L2EN |
LANEENABLE_L1EN | LANEENABLE_L0EN | LANEENABLE_CLEN);
tc358764_write(ctx, DSI_LANEENABLE, LANEENABLE_L3EN | LANEENABLE_L2EN |
LANEENABLE_L1EN | LANEENABLE_L0EN | LANEENABLE_CLEN);
/* start */
tc358764_write(ctx, PPI_STARTPPI, PPI_START_FUNCTION);
tc358764_write(ctx, DSI_STARTDSI, DSI_RX_START);
/* configure video path */
tc358764_write(ctx, VP_CTRL, VP_CTRL_VSDELAY(15) | VP_CTRL_RGB888(1) |
VP_CTRL_EVTMODE(1) | VP_CTRL_HSPOL | VP_CTRL_VSPOL);
/* reset PHY */
tc358764_write(ctx, LV_PHY0, LV_PHY0_RST(1) |
LV_PHY0_PRBS_ON(4) | LV_PHY0_IS(2) | LV_PHY0_ND(6));
tc358764_write(ctx, LV_PHY0, LV_PHY0_PRBS_ON(4) | LV_PHY0_IS(2) |
LV_PHY0_ND(6));
/* reset bridge */
tc358764_write(ctx, SYS_RST, SYS_RST_LCD);
/* set bit order */
tc358764_write(ctx, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3));
tc358764_write(ctx, LV_MX0407, LV_MX(LVI_R4, LVI_R7, LVI_R5, LVI_G0));
tc358764_write(ctx, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_G6, LVI_G7));
tc358764_write(ctx, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0));
tc358764_write(ctx, LV_MX1619, LV_MX(LVI_B6, LVI_B7, LVI_B1, LVI_B2));
tc358764_write(ctx, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0));
tc358764_write(ctx, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R6));
tc358764_write(ctx, LV_CFG, LV_CFG_CLKPOL2 | LV_CFG_CLKPOL1 |
LV_CFG_LVEN);
return tc358764_clear_error(ctx);
}
static void tc358764_reset(struct tc358764 *ctx)
{
gpiod_set_value(ctx->gpio_reset, 1);
usleep_range(1000, 2000);
gpiod_set_value(ctx->gpio_reset, 0);
usleep_range(1000, 2000);
}
static int tc358764_get_modes(struct drm_connector *connector)
{
struct tc358764 *ctx = connector_to_tc358764(connector);
return drm_panel_get_modes(ctx->panel, connector);
}
static const
struct drm_connector_helper_funcs tc358764_connector_helper_funcs = {
.get_modes = tc358764_get_modes,
};
static const struct drm_connector_funcs tc358764_connector_funcs = {
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = drm_connector_cleanup,
.reset = drm_atomic_helper_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static void tc358764_disable(struct drm_bridge *bridge)
{
struct tc358764 *ctx = bridge_to_tc358764(bridge);
int ret = drm_panel_disable(bridge_to_tc358764(bridge)->panel);
if (ret < 0)
dev_err(ctx->dev, "error disabling panel (%d)\n", ret);
}
static void tc358764_post_disable(struct drm_bridge *bridge)
{
struct tc358764 *ctx = bridge_to_tc358764(bridge);
int ret;
ret = drm_panel_unprepare(ctx->panel);
if (ret < 0)
dev_err(ctx->dev, "error unpreparing panel (%d)\n", ret);
tc358764_reset(ctx);
usleep_range(10000, 15000);
ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
if (ret < 0)
dev_err(ctx->dev, "error disabling regulators (%d)\n", ret);
}
static void tc358764_pre_enable(struct drm_bridge *bridge)
{
struct tc358764 *ctx = bridge_to_tc358764(bridge);
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
if (ret < 0)
dev_err(ctx->dev, "error enabling regulators (%d)\n", ret);
usleep_range(10000, 15000);
tc358764_reset(ctx);
ret = tc358764_init(ctx);
if (ret < 0)
dev_err(ctx->dev, "error initializing bridge (%d)\n", ret);
ret = drm_panel_prepare(ctx->panel);
if (ret < 0)
dev_err(ctx->dev, "error preparing panel (%d)\n", ret);
}
static void tc358764_enable(struct drm_bridge *bridge)
{
struct tc358764 *ctx = bridge_to_tc358764(bridge);
int ret = drm_panel_enable(ctx->panel);
if (ret < 0)
dev_err(ctx->dev, "error enabling panel (%d)\n", ret);
}
static int tc358764_attach(struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags)
{
struct tc358764 *ctx = bridge_to_tc358764(bridge);
struct drm_device *drm = bridge->dev;
int ret;
if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
DRM_ERROR("Fix bridge driver to make connector optional!");
return -EINVAL;
}
ctx->connector.polled = DRM_CONNECTOR_POLL_HPD;
ret = drm_connector_init(drm, &ctx->connector,
&tc358764_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
if (ret) {
DRM_ERROR("Failed to initialize connector\n");
return ret;
}
drm_connector_helper_add(&ctx->connector,
&tc358764_connector_helper_funcs);
drm_connector_attach_encoder(&ctx->connector, bridge->encoder);
drm_panel_attach(ctx->panel, &ctx->connector);
ctx->connector.funcs->reset(&ctx->connector);
drm_connector_register(&ctx->connector);
return 0;
}
static void tc358764_detach(struct drm_bridge *bridge)
{
struct tc358764 *ctx = bridge_to_tc358764(bridge);
drm_connector_unregister(&ctx->connector);
drm_panel_detach(ctx->panel);
ctx->panel = NULL;
drm_connector_put(&ctx->connector);
}
static const struct drm_bridge_funcs tc358764_bridge_funcs = {
.disable = tc358764_disable,
.post_disable = tc358764_post_disable,
.enable = tc358764_enable,
.pre_enable = tc358764_pre_enable,
.attach = tc358764_attach,
.detach = tc358764_detach,
};
static int tc358764_parse_dt(struct tc358764 *ctx)
{
struct device *dev = ctx->dev;
int ret;
ctx->gpio_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->gpio_reset)) {
dev_err(dev, "no reset GPIO pin provided\n");
return PTR_ERR(ctx->gpio_reset);
}
ret = drm_of_find_panel_or_bridge(ctx->dev->of_node, 1, 0, &ctx->panel,
NULL);
if (ret && ret != -EPROBE_DEFER)
dev_err(dev, "cannot find panel (%d)\n", ret);
return ret;
}
static int tc358764_configure_regulators(struct tc358764 *ctx)
{
int i, ret;
for (i = 0; i < ARRAY_SIZE(ctx->supplies); ++i)
ctx->supplies[i].supply = tc358764_supplies[i];
ret = devm_regulator_bulk_get(ctx->dev, ARRAY_SIZE(ctx->supplies),
ctx->supplies);
if (ret < 0)
dev_err(ctx->dev, "failed to get regulators: %d\n", ret);
return ret;
}
static int tc358764_probe(struct mipi_dsi_device *dsi)
{
struct device *dev = &dsi->dev;
struct tc358764 *ctx;
int ret;
ctx = devm_kzalloc(dev, sizeof(struct tc358764), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
mipi_dsi_set_drvdata(dsi, ctx);
ctx->dev = dev;
dsi->lanes = 4;
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST
| MIPI_DSI_MODE_VIDEO_AUTO_VERT | MIPI_DSI_MODE_LPM;
ret = tc358764_parse_dt(ctx);
if (ret < 0)
return ret;
ret = tc358764_configure_regulators(ctx);
if (ret < 0)
return ret;
ctx->bridge.funcs = &tc358764_bridge_funcs;
ctx->bridge.of_node = dev->of_node;
drm_bridge_add(&ctx->bridge);
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
drm_bridge_remove(&ctx->bridge);
dev_err(dev, "failed to attach dsi\n");
}
return ret;
}
static int tc358764_remove(struct mipi_dsi_device *dsi)
{
struct tc358764 *ctx = mipi_dsi_get_drvdata(dsi);
mipi_dsi_detach(dsi);
drm_bridge_remove(&ctx->bridge);
return 0;
}
static const struct of_device_id tc358764_of_match[] = {
{ .compatible = "toshiba,tc358764" },
{ }
};
MODULE_DEVICE_TABLE(of, tc358764_of_match);
static struct mipi_dsi_driver tc358764_driver = {
.probe = tc358764_probe,
.remove = tc358764_remove,
.driver = {
.name = "tc358764",
.owner = THIS_MODULE,
.of_match_table = tc358764_of_match,
},
};
module_mipi_dsi_driver(tc358764_driver);
MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>");
MODULE_AUTHOR("Maciej Purski <m.purski@samsung.com>");
MODULE_DESCRIPTION("MIPI-DSI based Driver for TC358764 DSI/LVDS Bridge");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink