linux_dsm_epyc7002/Documentation/hwmon/max31790.rst
Alexander A. Klimov ad736c1a4d hwmon: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719175512.60745-1-grandmaster@al2klimov.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24 07:44:57 -07:00

44 lines
1.3 KiB
ReStructuredText

Kernel driver max31790
======================
Supported chips:
* Maxim MAX31790
Prefix: 'max31790'
Addresses scanned: -
Datasheet: https://pdfserv.maximintegrated.com/en/ds/MAX31790.pdf
Author: Il Han <corone.il.han@gmail.com>
Description
-----------
This driver implements support for the Maxim MAX31790 chip.
The MAX31790 controls the speeds of up to six fans using six independent
PWM outputs. The desired fan speeds (or PWM duty cycles) are written
through the I2C interface. The outputs drive "4-wire" fans directly,
or can be used to modulate the fan's power terminals using an external
pass transistor.
Tachometer inputs monitor fan tachometer logic outputs for precise (+/-1%)
monitoring and control of fan RPM as well as detection of fan failure.
Six pins are dedicated tachometer inputs. Any of the six PWM outputs can
also be configured to serve as tachometer inputs.
Sysfs entries
-------------
================== === =======================================================
fan[1-12]_input RO fan tachometer speed in RPM
fan[1-12]_fault RO fan experienced fault
fan[1-6]_target RW desired fan speed in RPM
pwm[1-6]_enable RW regulator mode, 0=disabled, 1=manual mode, 2=rpm mode
pwm[1-6] RW fan target duty cycle (0-255)
================== === =======================================================