AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-21 23:53:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
3f4b04e3cf
linux_dsm_epyc7002/arch/arm/boot/dts/exynos5800-peach-pi.dts
Marek Szyprowski ff1e37c680 ARM: dts: exynos: Correct audio subsystem parent clock on Peach Chromebooks 
The proper parent clock for audio subsystem for Exynos5420 and Exynos5800
SoCs is CLK_MAU_EPLL. This fixes following warning:

    clk: failed to reparent mout_audss to fout_epll: -22

Fixes: ed7d130707: ARM: dts: exynos: Enable HDMI audio support on Peach Pit
Fixes: bae0f445c1: ARM: dts: exynos: Enable HDMI audio support on Peach Pi
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-09-24 18:55:16 +02:00

1083 lines
24 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* Google Peach Pi Rev 10+ board device tree source
*
* Copyright (c) 2014 Google, Inc
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/maxim,max77802.h>
#include <dt-bindings/regulator/maxim,max77802.h>
#include <dt-bindings/sound/samsung-i2s.h>
#include "exynos5800.dtsi"
#include "exynos5420-cpus.dtsi"
/ {
model = "Google Peach Pi Rev 10+";
compatible = "google,pi-rev16",
"google,pi-rev15", "google,pi-rev14",
"google,pi-rev13", "google,pi-rev12",
"google,pi-rev11", "google,pi-rev10",
"google,pi", "google,peach", "samsung,exynos5800",
"samsung,exynos5";
aliases {
/* Assign 20 so we don't get confused w/ builtin ones */
i2c20 = &i2c_tunnel;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
default-brightness-level = <7>;
enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
power-supply = <&tps65090_fet1>;
pinctrl-0 = <&pwm0_out>;
pinctrl-names = "default";
};
chosen {
stdout-path = "serial3:115200n8";
};
fixed-rate-clocks {
oscclk {
compatible = "samsung,exynos5420-oscclk";
clock-frequency = <24000000>;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&power_key_irq &lid_irq>;
power {
label = "Power";
gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
lid-switch {
label = "Lid";
gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
wakeup-source;
};
};
memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x80000000>;
};
sound {
compatible = "google,snow-audio-max98091";
samsung,model = "Peach-Pi-I2S-MAX98091";
samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&max98091>;
cpu {
sound-dai = <&i2s0 0>;
};
codec {
sound-dai = <&max98091>, <&hdmi>;
};
};
usb300_vbus_reg: regulator-usb300 {
compatible = "regulator-fixed";
regulator-name = "P5.0V_USB3CON0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb300_vbus_en>;
enable-active-high;
};
usb301_vbus_reg: regulator-usb301 {
compatible = "regulator-fixed";
regulator-name = "P5.0V_USB3CON1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb301_vbus_en>;
enable-active-high;
};
vbat: fixed-regulator {
compatible = "regulator-fixed";
regulator-name = "vbat-supply";
regulator-boot-on;
regulator-always-on;
};
panel: panel {
compatible = "auo,b133htn01";
power-supply = <&tps65090_fet6>;
backlight = <&backlight>;
port {
panel_in: endpoint {
remote-endpoint = <&dp_out>;
};
};
};
mmc1_pwrseq: mmc1_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
clocks = <&max77802 MAX77802_CLK_32K_CP>;
clock-names = "ext_clock";
};
};
&adc {
status = "okay";
vdd-supply = <&ldo9_reg>;
};
&clock_audss {
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
assigned-clock-parents = <&clock CLK_MAU_EPLL>;
};
&cpu0 {
cpu-supply = <&buck2_reg>;
};
&cpu4 {
cpu-supply = <&buck6_reg>;
};
&dp {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd_gpio>;
samsung,color-space = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <2>;
samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
ports {
port {
dp_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
&fimd {
status = "okay";
samsung,invert-vclk;
};
&hdmi {
status = "okay";
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
ddc = <&i2c_2>;
hdmi-en-supply = <&tps65090_fet7>;
vdd-supply = <&ldo8_reg>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
};
&hsi2c_4 {
status = "okay";
clock-frequency = <400000>;
max77802: max77802-pmic@9 {
compatible = "maxim,max77802";
interrupt-parent = <&gpx3>;
interrupts = <1 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
<&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
wakeup-source;
reg = <0x9>;
#clock-cells = <1>;
inb1-supply = <&tps65090_dcdc2>;
inb2-supply = <&tps65090_dcdc1>;
inb3-supply = <&tps65090_dcdc2>;
inb4-supply = <&tps65090_dcdc2>;
inb5-supply = <&tps65090_dcdc1>;
inb6-supply = <&tps65090_dcdc2>;
inb7-supply = <&tps65090_dcdc1>;
inb8-supply = <&tps65090_dcdc1>;
inb9-supply = <&tps65090_dcdc1>;
inb10-supply = <&tps65090_dcdc1>;
inl1-supply = <&buck5_reg>;
inl2-supply = <&buck7_reg>;
inl3-supply = <&buck9_reg>;
inl4-supply = <&buck9_reg>;
inl5-supply = <&buck9_reg>;
inl6-supply = <&tps65090_dcdc2>;
inl7-supply = <&buck9_reg>;
inl9-supply = <&tps65090_dcdc2>;
inl10-supply = <&buck7_reg>;
regulators {
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
buck5_reg: BUCK5 {
regulator-name = "vdd_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
buck6_reg: BUCK6 {
regulator-name = "vdd_kfc";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
buck7_reg: BUCK7 {
regulator-name = "vdd_1v35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
buck8_reg: BUCK8 {
regulator-name = "vdd_emmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
buck9_reg: BUCK9 {
regulator-name = "vdd_2v";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
buck10_reg: BUCK10 {
regulator-name = "vdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
ldo1_reg: LDO1 {
regulator-name = "vdd_1v0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-mode = <MAX77802_OPMODE_LP>;
};
};
ldo2_reg: LDO2 {
regulator-name = "vdd_1v2_2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo3_reg: LDO3 {
regulator-name = "vdd_1v8_3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-mode = <MAX77802_OPMODE_LP>;
};
};
vqmmc_sdcard: ldo4_reg: LDO4 {
regulator-name = "vdd_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo5_reg: LDO5 {
regulator-name = "vdd_1v8_5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo6_reg: LDO6 {
regulator-name = "vdd_1v8_6";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo7_reg: LDO7 {
regulator-name = "vdd_1v8_7";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo8_reg: LDO8 {
regulator-name = "vdd_ldo8";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo9_reg: LDO9 {
regulator-name = "vdd_ldo9";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-mode = <MAX77802_OPMODE_LP>;
};
};
ldo10_reg: LDO10 {
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo11_reg: LDO11 {
regulator-name = "vdd_ldo11";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-mode = <MAX77802_OPMODE_LP>;
};
};
ldo12_reg: LDO12 {
regulator-name = "vdd_ldo12";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo13_reg: LDO13 {
regulator-name = "vdd_ldo13";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-mode = <MAX77802_OPMODE_LP>;
};
};
ldo14_reg: LDO14 {
regulator-name = "vdd_ldo14";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo15_reg: LDO15 {
regulator-name = "vdd_ldo15";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo17_reg: LDO17 {
regulator-name = "vdd_g3ds";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo18_reg: LDO18 {
regulator-name = "ldo_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo19_reg: LDO19 {
regulator-name = "ldo_19";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo20_reg: LDO20 {
regulator-name = "ldo_20";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo21_reg: LDO21 {
regulator-name = "ldo_21";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo23_reg: LDO23 {
regulator-name = "ldo_23";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo24_reg: LDO24 {
regulator-name = "ldo_24";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo25_reg: LDO25 {
regulator-name = "ldo_25";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo26_reg: LDO26 {
regulator-name = "ldo_26";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo27_reg: LDO27 {
regulator-name = "ldo_27";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo28_reg: LDO28 {
regulator-name = "ldo_28";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo29_reg: LDO29 {
regulator-name = "ldo_29";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo30_reg: LDO30 {
regulator-name = "vdd_mifs";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo32_reg: LDO32 {
regulator-name = "ldo_32";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ldo33_reg: LDO33 {
regulator-name = "ldo_33";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo34_reg: LDO34 {
regulator-name = "ldo_34";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ldo35_reg: LDO35 {
regulator-name = "ldo_35";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
};
};
};
&hsi2c_7 {
status = "okay";
clock-frequency = <400000>;
max98091: codec@10 {
compatible = "maxim,max98091";
reg = <0x10>;
interrupts = <2 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx0>;
pinctrl-names = "default";
pinctrl-0 = <&max98091_irq>;
clocks = <&pmu_system_controller 0>;
clock-names = "mclk";
#sound-dai-cells = <0>;
};
light-sensor@44 {
compatible = "isil,isl29018";
reg = <0x44>;
vcc-supply = <&tps65090_fet5>;
};
};
&hsi2c_8 {
status = "okay";
clock-frequency = <333000>;
/* Atmel mXT540S */
trackpad@4b {
compatible = "atmel,maxtouch";
reg = <0x4b>;
interrupt-parent = <&gpx1>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
wakeup-source;
pinctrl-names = "default";
pinctrl-0 = <&trackpad_irq>;
linux,gpio-keymap = <KEY_RESERVED
KEY_RESERVED
KEY_RESERVED /* GPIO 0 */
KEY_RESERVED /* GPIO 1 */
BTN_LEFT /* GPIO 2 */
KEY_RESERVED>; /* GPIO 3 */
};
};
&hsi2c_9 {
status = "okay";
clock-frequency = <400000>;
tpm@20 {
compatible = "infineon,slb9645tt";
reg = <0x20>;
/* Unused irq; but still need to configure the pins */
pinctrl-names = "default";
pinctrl-0 = <&tpm_irq>;
};
};
&i2c_2 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
samsung,i2c-slave-addr = <0x50>;
};
&i2s0 {
assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
status = "okay";
};
&mixer {
status = "okay";
};
/* eMMC flash */
&mmc_0 {
status = "okay";
mmc-hs200-1_8v;
mmc-hs400-1_8v;
cap-mmc-highspeed;
non-removable;
clock-frequency = <800000000>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
samsung,dw-mshc-hs400-timing = <0 2>;
samsung,read-strobe-delay = <90>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
bus-width = <8>;
};
/* WiFi SDIO module */
&mmc_1 {
status = "okay";
non-removable;
cap-sdio-irq;
keep-power-in-suspend;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <1>;
samsung,dw-mshc-sdr-timing = <0 1>;
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
<&sd1_bus4>, <&sd1_bus8>, <&wifi_en>;
bus-width = <4>;
cap-sd-highspeed;
mmc-pwrseq = <&mmc1_pwrseq>;
vqmmc-supply = <&buck10_reg>;
};
/* uSD card */
&mmc_2 {
status = "okay";
cap-sd-highspeed;
card-detect-delay = <200>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
bus-width = <4>;
};
&pinctrl_0 {
pinctrl-names = "default";
pinctrl-0 = <&mask_tpm_reset>;
wifi_en: wifi-en {
samsung,pins = "gpx0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
max98091_irq: max98091-irq {
samsung,pins = "gpx0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
/* We need GPX0_6 to be low at sleep time; just keep it low always */
mask_tpm_reset: mask-tpm-reset {
samsung,pins = "gpx0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
samsung,pin-val = <0>;
};
tpm_irq: tpm-irq {
samsung,pins = "gpx1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
trackpad_irq: trackpad-irq {
samsung,pins = "gpx1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
power_key_irq: power-key-irq {
samsung,pins = "gpx1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
ec_irq: ec-irq {
samsung,pins = "gpx1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
tps65090_irq: tps65090-irq {
samsung,pins = "gpx2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
dp_hpd_gpio: dp_hpd_gpio {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
max77802_irq: max77802-irq {
samsung,pins = "gpx3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
lid_irq: lid-irq {
samsung,pins = "gpx3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
hdmi_hpd_irq: hdmi-hpd-irq {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
pmic_dvs_1: pmic-dvs-1 {
samsung,pins = "gpy7-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
&pinctrl_1 {
/* Adjust WiFi drive strengths lower for EMI */
sd1_clk: sd1-clk {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
sd1_cmd: sd1-cmd {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
sd1_bus8: sd1-bus-width8 {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
};
&pinctrl_2 {
pmic_dvs_2: pmic-dvs-2 {
samsung,pins = "gpj4-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
pmic_dvs_3: pmic-dvs-3 {
samsung,pins = "gpj4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
&pinctrl_3 {
/* Drive SPI lines at x2 for better integrity */
spi2-bus {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
/* Drive SPI chip select at x2 for better integrity */
ec_spi_cs: ec-spi-cs {
samsung,pins = "gpb1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
usb300_vbus_en: usb300-vbus-en {
samsung,pins = "gph0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
usb301_vbus_en: usb301-vbus-en {
samsung,pins = "gph0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
pmic_selb: pmic-selb {
samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
"gph0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
&pmu_system_controller {
assigned-clocks = <&pmu_system_controller 0>;
assigned-clock-parents = <&clock CLK_FIN_PLL>;
};
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
clock-names = "rtc", "rtc_src";
};
&spi_2 {
status = "okay";
num-cs = <1>;
samsung,spi-src-clk = <0>;
cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
cros_ec: cros-ec@0 {
compatible = "google,cros-ec-spi";
interrupt-parent = <&gpx1>;
interrupts = <5 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&ec_spi_cs &ec_irq>;
reg = <0>;
spi-max-frequency = <3125000>;
google,has-vbc-nvram;
controller-data {
samsung,spi-feedback-delay = <1>;
};
i2c_tunnel: i2c-tunnel {
compatible = "google,cros-ec-i2c-tunnel";
#address-cells = <1>;
#size-cells = <0>;
google,remote-bus = <0>;
battery: sbs-battery@b {
compatible = "sbs,sbs-battery";
reg = <0xb>;
sbs,poll-retry-count = <1>;
sbs,i2c-retry-count = <2>;
};
power-regulator@48 {
compatible = "ti,tps65090";
reg = <0x48>;
/*
* Config irq to disable internal pulls
* even though we run in polling mode.
*/
pinctrl-names = "default";
pinctrl-0 = <&tps65090_irq>;
vsys1-supply = <&vbat>;
vsys2-supply = <&vbat>;
vsys3-supply = <&vbat>;
infet1-supply = <&vbat>;
infet2-supply = <&tps65090_dcdc1>;
infet3-supply = <&tps65090_dcdc2>;
infet4-supply = <&tps65090_dcdc2>;
infet5-supply = <&tps65090_dcdc2>;
infet6-supply = <&tps65090_dcdc2>;
infet7-supply = <&tps65090_dcdc1>;
vsys-l1-supply = <&vbat>;
vsys-l2-supply = <&vbat>;
regulators {
tps65090_dcdc1: dcdc1 {
ti,enable-ext-control;
};
tps65090_dcdc2: dcdc2 {
ti,enable-ext-control;
};
tps65090_dcdc3: dcdc3 {
ti,enable-ext-control;
};
tps65090_fet1: fet1 {
regulator-name = "vcd_led";
};
tps65090_fet2: fet2 {
regulator-name = "video_mid";
regulator-always-on;
};
tps65090_fet3: fet3 {
regulator-name = "wwan_r";
regulator-always-on;
};
tps65090_fet4: fet4 {
regulator-name = "sdcard";
regulator-always-on;
};
tps65090_fet5: fet5 {
regulator-name = "camout";
regulator-always-on;
};
tps65090_fet6: fet6 {
regulator-name = "lcd_vdd";
};
tps65090_fet7: fet7 {
regulator-name = "video_mid_1a";
regulator-always-on;
};
tps65090_ldo1: ldo1 {
};
tps65090_ldo2: ldo2 {
};
};
charger {
compatible = "ti,tps65090-charger";
};
};
};
};
};
&serial_3 {
status = "okay";
};
&tmu_cpu0 {
vtmu-supply = <&ldo10_reg>;
};
&tmu_cpu1 {
vtmu-supply = <&ldo10_reg>;
};
&tmu_cpu2 {
vtmu-supply = <&ldo10_reg>;
};
&tmu_cpu3 {
vtmu-supply = <&ldo10_reg>;
};
&tmu_gpu {
vtmu-supply = <&ldo10_reg>;
};
&usbdrd_dwc3_0 {
dr_mode = "host";
};
&usbdrd_dwc3_1 {
dr_mode = "host";
};
&usbdrd_phy0 {
vbus-supply = <&usb300_vbus_reg>;
};
&usbdrd_phy1 {
vbus-supply = <&usb301_vbus_reg>;
};
/*
* Use longest HW watchdog in SoC (32 seconds) since the hardware
* watchdog provides no debugging information (compared to soft/hard
* lockup detectors) and so should be last resort.
*/
&watchdog {
timeout-sec = <32>;
};
#include "cros-ec-keyboard.dtsi"
#include "cros-adc-thermistors.dtsi"
Reference in New Issue View Git Blame Copy Permalink