mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-20 02:07:40 +07:00
5d1190ea69
This commit migrates the mach-orion5x platforms to use the mvebu-mbus driver and therefore removes the Orion5x-specific addr-map code. The dove_init_early() function now initializes the mvebu-mbus driver by calling mvebu_mbus_init(). We also convert a number of orion5x_setup_xyz_win() calls to the appropriate mvebu_mbus_add_window() calls, as each board was doing its own setup for the NOR window or other devices. Ultimately, those devices will be probed from the DT. The common address decoding windows are now registered in the orion5x_setup_wins() function. It is worth noting that the four PCIe address decoding windows will ultimately no longer have to be registered here: it will be done automatically by the PCIe driver once Dove has been migrated to use the upcoming mvebu PCIe driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
288 lines
7.3 KiB
C
288 lines
7.3 KiB
C
/*
|
|
* arch/arm/mach-orion5x/rd88f5182-setup.c
|
|
*
|
|
* Marvell Orion-NAS Reference Design Setup
|
|
*
|
|
* Maintainer: Ronen Shitrit <rshitrit@marvell.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mv643xx_eth.h>
|
|
#include <linux/ata_platform.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/leds.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/pci.h>
|
|
#include <mach/orion5x.h>
|
|
#include "common.h"
|
|
#include "mpp.h"
|
|
|
|
/*****************************************************************************
|
|
* RD-88F5182 Info
|
|
****************************************************************************/
|
|
|
|
/*
|
|
* 512K NOR flash Device bus boot chip select
|
|
*/
|
|
|
|
#define RD88F5182_NOR_BOOT_BASE 0xf4000000
|
|
#define RD88F5182_NOR_BOOT_SIZE SZ_512K
|
|
|
|
/*
|
|
* 16M NOR flash on Device bus chip select 1
|
|
*/
|
|
|
|
#define RD88F5182_NOR_BASE 0xfc000000
|
|
#define RD88F5182_NOR_SIZE SZ_16M
|
|
|
|
/*
|
|
* PCI
|
|
*/
|
|
|
|
#define RD88F5182_PCI_SLOT0_OFFS 7
|
|
#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
|
|
#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
|
|
|
|
/*****************************************************************************
|
|
* 16M NOR Flash on Device bus CS1
|
|
****************************************************************************/
|
|
|
|
static struct physmap_flash_data rd88f5182_nor_flash_data = {
|
|
.width = 1,
|
|
};
|
|
|
|
static struct resource rd88f5182_nor_flash_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
.start = RD88F5182_NOR_BASE,
|
|
.end = RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1,
|
|
};
|
|
|
|
static struct platform_device rd88f5182_nor_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &rd88f5182_nor_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &rd88f5182_nor_flash_resource,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* Use GPIO LED as CPU active indication
|
|
****************************************************************************/
|
|
|
|
#define RD88F5182_GPIO_LED 0
|
|
|
|
static struct gpio_led rd88f5182_gpio_led_pins[] = {
|
|
{
|
|
.name = "rd88f5182:cpu",
|
|
.default_trigger = "cpu0",
|
|
.gpio = RD88F5182_GPIO_LED,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data rd88f5182_gpio_led_data = {
|
|
.leds = rd88f5182_gpio_led_pins,
|
|
.num_leds = ARRAY_SIZE(rd88f5182_gpio_led_pins),
|
|
};
|
|
|
|
static struct platform_device rd88f5182_gpio_leds = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &rd88f5182_gpio_led_data,
|
|
},
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* PCI
|
|
****************************************************************************/
|
|
|
|
void __init rd88f5182_pci_preinit(void)
|
|
{
|
|
int pin;
|
|
|
|
/*
|
|
* Configure PCI GPIO IRQ pins
|
|
*/
|
|
pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
|
|
if (gpio_request(pin, "PCI IntA") == 0) {
|
|
if (gpio_direction_input(pin) == 0) {
|
|
irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
|
|
} else {
|
|
printk(KERN_ERR "rd88f5182_pci_preinit failed to "
|
|
"set_irq_type pin %d\n", pin);
|
|
gpio_free(pin);
|
|
}
|
|
} else {
|
|
printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
|
|
}
|
|
|
|
pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
|
|
if (gpio_request(pin, "PCI IntB") == 0) {
|
|
if (gpio_direction_input(pin) == 0) {
|
|
irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
|
|
} else {
|
|
printk(KERN_ERR "rd88f5182_pci_preinit failed to "
|
|
"set_irq_type pin %d\n", pin);
|
|
gpio_free(pin);
|
|
}
|
|
} else {
|
|
printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
|
|
}
|
|
}
|
|
|
|
static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot,
|
|
u8 pin)
|
|
{
|
|
int irq;
|
|
|
|
/*
|
|
* Check for devices with hard-wired IRQs.
|
|
*/
|
|
irq = orion5x_pci_map_irq(dev, slot, pin);
|
|
if (irq != -1)
|
|
return irq;
|
|
|
|
/*
|
|
* PCI IRQs are connected via GPIOs
|
|
*/
|
|
switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
|
|
case 0:
|
|
if (pin == 1)
|
|
return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
|
|
else
|
|
return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
|
|
default:
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
static struct hw_pci rd88f5182_pci __initdata = {
|
|
.nr_controllers = 2,
|
|
.preinit = rd88f5182_pci_preinit,
|
|
.setup = orion5x_pci_sys_setup,
|
|
.scan = orion5x_pci_sys_scan_bus,
|
|
.map_irq = rd88f5182_pci_map_irq,
|
|
};
|
|
|
|
static int __init rd88f5182_pci_init(void)
|
|
{
|
|
if (machine_is_rd88f5182())
|
|
pci_common_init(&rd88f5182_pci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(rd88f5182_pci_init);
|
|
|
|
/*****************************************************************************
|
|
* Ethernet
|
|
****************************************************************************/
|
|
|
|
static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
|
|
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* RTC DS1338 on I2C bus
|
|
****************************************************************************/
|
|
static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
|
|
I2C_BOARD_INFO("ds1338", 0x68),
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* Sata
|
|
****************************************************************************/
|
|
static struct mv_sata_platform_data rd88f5182_sata_data = {
|
|
.n_ports = 2,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* General Setup
|
|
****************************************************************************/
|
|
static unsigned int rd88f5182_mpp_modes[] __initdata = {
|
|
MPP0_GPIO, /* Debug Led */
|
|
MPP1_GPIO, /* Reset Switch */
|
|
MPP2_UNUSED,
|
|
MPP3_GPIO, /* RTC Int */
|
|
MPP4_GPIO,
|
|
MPP5_GPIO,
|
|
MPP6_GPIO, /* PCI_intA */
|
|
MPP7_GPIO, /* PCI_intB */
|
|
MPP8_UNUSED,
|
|
MPP9_UNUSED,
|
|
MPP10_UNUSED,
|
|
MPP11_UNUSED,
|
|
MPP12_SATA_LED, /* SATA 0 presence */
|
|
MPP13_SATA_LED, /* SATA 1 presence */
|
|
MPP14_SATA_LED, /* SATA 0 active */
|
|
MPP15_SATA_LED, /* SATA 1 active */
|
|
MPP16_UNUSED,
|
|
MPP17_UNUSED,
|
|
MPP18_UNUSED,
|
|
MPP19_UNUSED,
|
|
0,
|
|
};
|
|
|
|
static void __init rd88f5182_init(void)
|
|
{
|
|
/*
|
|
* Setup basic Orion functions. Need to be called early.
|
|
*/
|
|
orion5x_init();
|
|
|
|
orion5x_mpp_conf(rd88f5182_mpp_modes);
|
|
|
|
/*
|
|
* MPP[20] PCI Clock to MV88F5182
|
|
* MPP[21] PCI Clock to mini PCI CON11
|
|
* MPP[22] USB 0 over current indication
|
|
* MPP[23] USB 1 over current indication
|
|
* MPP[24] USB 1 over current enable
|
|
* MPP[25] USB 0 over current enable
|
|
*/
|
|
|
|
/*
|
|
* Configure peripherals.
|
|
*/
|
|
orion5x_ehci0_init();
|
|
orion5x_ehci1_init();
|
|
orion5x_eth_init(&rd88f5182_eth_data);
|
|
orion5x_i2c_init();
|
|
orion5x_sata_init(&rd88f5182_sata_data);
|
|
orion5x_uart0_init();
|
|
orion5x_xor_init();
|
|
|
|
mvebu_mbus_add_window("devbus-boot", RD88F5182_NOR_BOOT_BASE,
|
|
RD88F5182_NOR_BOOT_SIZE);
|
|
|
|
mvebu_mbus_add_window("devbus-cs1", RD88F5182_NOR_BASE,
|
|
RD88F5182_NOR_SIZE);
|
|
platform_device_register(&rd88f5182_nor_flash);
|
|
platform_device_register(&rd88f5182_gpio_leds);
|
|
|
|
i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
|
|
}
|
|
|
|
MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
|
|
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
|
|
.atag_offset = 0x100,
|
|
.init_machine = rd88f5182_init,
|
|
.map_io = orion5x_map_io,
|
|
.init_early = orion5x_init_early,
|
|
.init_irq = orion5x_init_irq,
|
|
.init_time = orion5x_timer_init,
|
|
.restart = orion5x_restart,
|
|
MACHINE_END
|