mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 17:09:44 +07:00
9c1029818c
This change adds support for Analog Devices Industrial Ethernet PHYs. Particularly the PHYs this driver adds support for: * ADIN1200 - Robust, Industrial, Low Power 10/100 Ethernet PHY * ADIN1300 - Robust, Industrial, Low Latency 10/100/1000 Gigabit Ethernet PHY The 2 chips are register compatible with one another. The main difference being that ADIN1200 doesn't operate in gigabit mode. The chips can be operated by the Generic PHY driver as well via the standard IEEE PHY registers (0x0000 - 0x000F) which are supported by the kernel as well. This assumes that configuration of the PHY has been done completely in HW, according to spec. Configuration can also be done via registers, which will be supported by this driver. Datasheets: https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1300.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1200.pdf Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
97 lines
3.5 KiB
Makefile
97 lines
3.5 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
# Makefile for Linux PHY drivers and MDIO bus drivers
|
|
|
|
libphy-y := phy.o phy-c45.o phy-core.o phy_device.o
|
|
mdio-bus-y += mdio_bus.o mdio_device.o
|
|
|
|
ifdef CONFIG_MDIO_DEVICE
|
|
obj-y += mdio-boardinfo.o
|
|
endif
|
|
|
|
# PHYLIB implies MDIO_DEVICE, in that case, we have a bunch of circular
|
|
# dependencies that does not make it possible to split mdio-bus objects into a
|
|
# dedicated loadable module, so we bundle them all together into libphy.ko
|
|
ifdef CONFIG_PHYLIB
|
|
libphy-y += $(mdio-bus-y)
|
|
else
|
|
obj-$(CONFIG_MDIO_DEVICE) += mdio-bus.o
|
|
endif
|
|
libphy-$(CONFIG_SWPHY) += swphy.o
|
|
libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_led_triggers.o
|
|
|
|
obj-$(CONFIG_PHYLINK) += phylink.o
|
|
obj-$(CONFIG_PHYLIB) += libphy.o
|
|
|
|
obj-$(CONFIG_MDIO_ASPEED) += mdio-aspeed.o
|
|
obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
|
|
obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
|
|
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
|
|
obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
|
|
obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o
|
|
obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
|
|
obj-$(CONFIG_MDIO_BUS_MUX_MESON_G12A) += mdio-mux-meson-g12a.o
|
|
obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
|
|
obj-$(CONFIG_MDIO_BUS_MUX_MULTIPLEXER) += mdio-mux-multiplexer.o
|
|
obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
|
|
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
|
|
obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
|
|
obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o
|
|
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
|
|
obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o
|
|
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
|
|
obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
|
|
obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
|
|
obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
|
|
|
|
obj-$(CONFIG_SFP) += sfp.o
|
|
sfp-obj-$(CONFIG_SFP) += sfp-bus.o
|
|
obj-y += $(sfp-obj-y) $(sfp-obj-m)
|
|
|
|
obj-$(CONFIG_ADIN_PHY) += adin.o
|
|
obj-$(CONFIG_AMD_PHY) += amd.o
|
|
aquantia-objs += aquantia_main.o
|
|
ifdef CONFIG_HWMON
|
|
aquantia-objs += aquantia_hwmon.o
|
|
endif
|
|
obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o
|
|
obj-$(CONFIG_AX88796B_PHY) += ax88796b.o
|
|
obj-$(CONFIG_AT803X_PHY) += at803x.o
|
|
obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
|
|
obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
|
|
obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
|
|
obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o
|
|
obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o
|
|
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
|
|
obj-$(CONFIG_CICADA_PHY) += cicada.o
|
|
obj-$(CONFIG_CORTINA_PHY) += cortina.o
|
|
obj-$(CONFIG_DAVICOM_PHY) += davicom.o
|
|
obj-$(CONFIG_DP83640_PHY) += dp83640.o
|
|
obj-$(CONFIG_DP83822_PHY) += dp83822.o
|
|
obj-$(CONFIG_DP83TC811_PHY) += dp83tc811.o
|
|
obj-$(CONFIG_DP83848_PHY) += dp83848.o
|
|
obj-$(CONFIG_DP83867_PHY) += dp83867.o
|
|
obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
|
|
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
|
|
obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o
|
|
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
|
|
obj-$(CONFIG_LXT_PHY) += lxt.o
|
|
obj-$(CONFIG_MARVELL_PHY) += marvell.o
|
|
obj-$(CONFIG_MARVELL_10G_PHY) += marvell10g.o
|
|
obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o
|
|
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
|
|
obj-$(CONFIG_MICREL_PHY) += micrel.o
|
|
obj-$(CONFIG_MICROCHIP_PHY) += microchip.o
|
|
obj-$(CONFIG_MICROCHIP_T1_PHY) += microchip_t1.o
|
|
obj-$(CONFIG_MICROSEMI_PHY) += mscc.o
|
|
obj-$(CONFIG_NATIONAL_PHY) += national.o
|
|
obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o
|
|
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
|
|
obj-$(CONFIG_REALTEK_PHY) += realtek.o
|
|
obj-$(CONFIG_RENESAS_PHY) += uPD60620.o
|
|
obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o
|
|
obj-$(CONFIG_SMSC_PHY) += smsc.o
|
|
obj-$(CONFIG_STE10XP) += ste10Xp.o
|
|
obj-$(CONFIG_TERANETICS_PHY) += teranetics.o
|
|
obj-$(CONFIG_VITESSE_PHY) += vitesse.o
|
|
obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o
|