linux_dsm_epyc7002/drivers/phy
Icenowy Zheng 3ecc25e12f phy: sun4i-usb: support automatically switch PHY0 route to MUSB/HCI
On newer Allwinner SoCs (H3 and after), the PHY0 node is routed to both
MUSB controller for peripheral and host support (the host support is
slightly broken), and a pair of EHCI/OHCI controllers, which provide a
better support for host mode.

Add support for automatically switch the route of PHY0 according to the
status of dr_mode and id det pin.

Only H3 have this function enabled in this patch, as further SoCs will
be tested later and then have it enabled.

As H5 is reusing the PHY driver of H3, this function is also enabled.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10 16:42:58 +05:30
..
tegra phy: fix returnvar.cocci warnings 2016-11-18 18:19:16 +05:30
Kconfig phy: qcom-usb-hs: Add depends on EXTCON 2017-03-09 15:29:57 +05:30
Makefile Revert "phy: Add USB3 PHY support for Broadcom NSP SoC" 2017-03-09 15:29:44 +05:30
phy-armada375-usb2.c
phy-bcm-cygnus-pcie.c drivers: phy: constify phy_ops structures 2017-01-16 16:41:51 +05:30
phy-bcm-kona-usb2.c
phy-bcm-ns2-pcie.c
phy-bcm-ns-usb2.c
phy-bcm-ns-usb3.c
phy-berlin-sata.c phy: fix returnvar.cocci warnings 2016-11-18 18:19:16 +05:30
phy-berlin-usb.c
phy-brcm-sata.c
phy-core.c
phy-da8xx-usb.c
phy-dm816x-usb.c
phy-exynos4x12-usb2.c
phy-exynos5-usbdrd.c
phy-exynos4210-usb2.c
phy-exynos5250-sata.c
phy-exynos5250-usb2.c
phy-exynos-dp-video.c
phy-exynos-mipi-video.c
phy-exynos-pcie.c phy: phy-exynos-pcie: make it explicitly non-modular 2017-04-10 16:42:57 +05:30
phy-hi6220-usb.c drivers: phy: constify phy_ops structures 2017-01-16 16:41:51 +05:30
phy-hix5hd2-sata.c
phy-lpc18xx-usb-otg.c
phy-meson8b-usb2.c
phy-miphy28lp.c
phy-mt65xx-usb3.c drivers: phy: constify phy_ops structures 2017-01-16 16:41:51 +05:30
phy-mvebu-sata.c
phy-omap-control.c
phy-omap-usb2.c
phy-pistachio-usb.c
phy-pxa-28nm-hsic.c
phy-pxa-28nm-usb2.c
phy-qcom-apq8064-sata.c
phy-qcom-ipq806x-sata.c
phy-qcom-ufs-i.h phy: qcom-ufs: Remove -always-on property 2017-01-27 13:06:52 +05:30
phy-qcom-ufs-qmp-14nm.c phy: qcom-ufs: Suppress extraneous logging 2017-01-27 13:06:53 +05:30
phy-qcom-ufs-qmp-14nm.h
phy-qcom-ufs-qmp-20nm.c phy: qcom-ufs: Suppress extraneous logging 2017-01-27 13:06:53 +05:30
phy-qcom-ufs-qmp-20nm.h
phy-qcom-ufs.c phy: qcom-ufs: Fix misplaced jump label 2017-01-27 13:59:13 +05:30
phy-qcom-usb-hs.c phy: Add support for Qualcomm's USB HS phy 2017-01-27 13:06:52 +05:30
phy-qcom-usb-hsic.c phy: Add support for Qualcomm's USB HSIC phy 2017-01-27 13:06:52 +05:30
phy-rcar-gen2.c
phy-rcar-gen3-usb2.c drivers: phy: constify phy_ops structures 2017-01-16 16:41:51 +05:30
phy-rockchip-dp.c
phy-rockchip-emmc.c
phy-rockchip-inno-usb2.c phy: rockchip-inno-usb2: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set 2017-01-16 16:41:50 +05:30
phy-rockchip-pcie.c
phy-rockchip-typec.c
phy-rockchip-usb.c
phy-s5pv210-usb2.c
phy-samsung-usb2.c
phy-samsung-usb2.h
phy-spear1310-miphy.c
phy-spear1340-miphy.c
phy-stih407-usb.c
phy-sun4i-usb.c phy: sun4i-usb: support automatically switch PHY0 route to MUSB/HCI 2017-04-10 16:42:58 +05:30
phy-sun9i-usb.c
phy-ti-pipe3.c
phy-tusb1210.c
phy-twl4030-usb.c phy: for 4.10 2016-11-28 08:44:54 +01:00
phy-xgene.c
ulpi_phy.h