mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-16 02:06:49 +07:00
e2b36d5917
"Reconciling" in terms of interrupt handling, is to bring the soft irq
mask state in to synch with the hardware, after an interrupt causes
MSR[EE] to be cleared (while the soft mask may be enabled, and hard
irqs not marked disabled).
General kernel code should not be called while unreconciled, because
local_irq_disable, etc. manipulations can cause surprising irq traces,
and it's fragile because the soft irq code does not really expect to
be called in this situation.
When exiting from an interrupt, MSR[EE] is cleared to prevent races,
but soft irq state is enabled for the returned-to context, so this is
now an unreconciled state. restore_math is called in this state, and
that can be ftraced, and the ftrace subsystem disables local irqs.
Mark restore_math and its callees as notrace. Restore a sanity check
in the soft irq code that had to be disabled for this case, by commit
4da1f79227 ("powerpc/64: Disable irq restore warning for now").
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
332 lines
6.7 KiB
ArmAsm
332 lines
6.7 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0 */
|
|
#include <asm/processor.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/reg.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/cputable.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/page.h>
|
|
#include <asm/ptrace.h>
|
|
#include <asm/export.h>
|
|
#include <asm/asm-compat.h>
|
|
|
|
/*
|
|
* Load state from memory into VMX registers including VSCR.
|
|
* Assumes the caller has enabled VMX in the MSR.
|
|
*/
|
|
_GLOBAL(load_vr_state)
|
|
li r4,VRSTATE_VSCR
|
|
lvx v0,r4,r3
|
|
mtvscr v0
|
|
REST_32VRS(0,r4,r3)
|
|
blr
|
|
EXPORT_SYMBOL(load_vr_state)
|
|
_ASM_NOKPROBE_SYMBOL(load_vr_state); /* used by restore_math */
|
|
|
|
/*
|
|
* Store VMX state into memory, including VSCR.
|
|
* Assumes the caller has enabled VMX in the MSR.
|
|
*/
|
|
_GLOBAL(store_vr_state)
|
|
SAVE_32VRS(0, r4, r3)
|
|
mfvscr v0
|
|
li r4, VRSTATE_VSCR
|
|
stvx v0, r4, r3
|
|
blr
|
|
EXPORT_SYMBOL(store_vr_state)
|
|
|
|
/*
|
|
* Disable VMX for the task which had it previously,
|
|
* and save its vector registers in its thread_struct.
|
|
* Enables the VMX for use in the kernel on return.
|
|
* On SMP we know the VMX is free, since we give it up every
|
|
* switch (ie, no lazy save of the vector registers).
|
|
*
|
|
* Note that on 32-bit this can only use registers that will be
|
|
* restored by fast_exception_return, i.e. r3 - r6, r10 and r11.
|
|
*/
|
|
_GLOBAL(load_up_altivec)
|
|
mfmsr r5 /* grab the current MSR */
|
|
oris r5,r5,MSR_VEC@h
|
|
MTMSRD(r5) /* enable use of AltiVec now */
|
|
isync
|
|
|
|
/*
|
|
* While userspace in general ignores VRSAVE, glibc uses it as a boolean
|
|
* to optimise userspace context save/restore. Whenever we take an
|
|
* altivec unavailable exception we must set VRSAVE to something non
|
|
* zero. Set it to all 1s. See also the programming note in the ISA.
|
|
*/
|
|
mfspr r4,SPRN_VRSAVE
|
|
cmpwi 0,r4,0
|
|
bne+ 1f
|
|
li r4,-1
|
|
mtspr SPRN_VRSAVE,r4
|
|
1:
|
|
/* enable use of VMX after return */
|
|
#ifdef CONFIG_PPC32
|
|
mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */
|
|
oris r9,r9,MSR_VEC@h
|
|
#else
|
|
ld r4,PACACURRENT(r13)
|
|
addi r5,r4,THREAD /* Get THREAD */
|
|
oris r12,r12,MSR_VEC@h
|
|
std r12,_MSR(r1)
|
|
#endif
|
|
/* Don't care if r4 overflows, this is desired behaviour */
|
|
lbz r4,THREAD_LOAD_VEC(r5)
|
|
addi r4,r4,1
|
|
stb r4,THREAD_LOAD_VEC(r5)
|
|
addi r6,r5,THREAD_VRSTATE
|
|
li r4,1
|
|
li r10,VRSTATE_VSCR
|
|
stw r4,THREAD_USED_VR(r5)
|
|
lvx v0,r10,r6
|
|
mtvscr v0
|
|
REST_32VRS(0,r4,r6)
|
|
/* restore registers and return */
|
|
blr
|
|
|
|
/*
|
|
* save_altivec(tsk)
|
|
* Save the vector registers to its thread_struct
|
|
*/
|
|
_GLOBAL(save_altivec)
|
|
addi r3,r3,THREAD /* want THREAD of task */
|
|
PPC_LL r7,THREAD_VRSAVEAREA(r3)
|
|
PPC_LL r5,PT_REGS(r3)
|
|
PPC_LCMPI 0,r7,0
|
|
bne 2f
|
|
addi r7,r3,THREAD_VRSTATE
|
|
2: SAVE_32VRS(0,r4,r7)
|
|
mfvscr v0
|
|
li r4,VRSTATE_VSCR
|
|
stvx v0,r4,r7
|
|
blr
|
|
|
|
#ifdef CONFIG_VSX
|
|
|
|
#ifdef CONFIG_PPC32
|
|
#error This asm code isn't ready for 32-bit kernels
|
|
#endif
|
|
|
|
/*
|
|
* load_up_vsx(unused, unused, tsk)
|
|
* Disable VSX for the task which had it previously,
|
|
* and save its vector registers in its thread_struct.
|
|
* Reuse the fp and vsx saves, but first check to see if they have
|
|
* been saved already.
|
|
*/
|
|
_GLOBAL(load_up_vsx)
|
|
/* Load FP and VSX registers if they haven't been done yet */
|
|
andi. r5,r12,MSR_FP
|
|
beql+ load_up_fpu /* skip if already loaded */
|
|
andis. r5,r12,MSR_VEC@h
|
|
beql+ load_up_altivec /* skip if already loaded */
|
|
|
|
ld r4,PACACURRENT(r13)
|
|
addi r4,r4,THREAD /* Get THREAD */
|
|
li r6,1
|
|
stw r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */
|
|
/* enable use of VSX after return */
|
|
oris r12,r12,MSR_VSX@h
|
|
std r12,_MSR(r1)
|
|
b fast_exception_return
|
|
|
|
#endif /* CONFIG_VSX */
|
|
|
|
|
|
/*
|
|
* The routines below are in assembler so we can closely control the
|
|
* usage of floating-point registers. These routines must be called
|
|
* with preempt disabled.
|
|
*/
|
|
#ifdef CONFIG_PPC32
|
|
.data
|
|
fpzero:
|
|
.long 0
|
|
fpone:
|
|
.long 0x3f800000 /* 1.0 in single-precision FP */
|
|
fphalf:
|
|
.long 0x3f000000 /* 0.5 in single-precision FP */
|
|
|
|
#define LDCONST(fr, name) \
|
|
lis r11,name@ha; \
|
|
lfs fr,name@l(r11)
|
|
#else
|
|
|
|
.section ".toc","aw"
|
|
fpzero:
|
|
.tc FD_0_0[TC],0
|
|
fpone:
|
|
.tc FD_3ff00000_0[TC],0x3ff0000000000000 /* 1.0 */
|
|
fphalf:
|
|
.tc FD_3fe00000_0[TC],0x3fe0000000000000 /* 0.5 */
|
|
|
|
#define LDCONST(fr, name) \
|
|
lfd fr,name@toc(r2)
|
|
#endif
|
|
|
|
.text
|
|
/*
|
|
* Internal routine to enable floating point and set FPSCR to 0.
|
|
* Don't call it from C; it doesn't use the normal calling convention.
|
|
*/
|
|
fpenable:
|
|
#ifdef CONFIG_PPC32
|
|
stwu r1,-64(r1)
|
|
#else
|
|
stdu r1,-64(r1)
|
|
#endif
|
|
mfmsr r10
|
|
ori r11,r10,MSR_FP
|
|
mtmsr r11
|
|
isync
|
|
stfd fr0,24(r1)
|
|
stfd fr1,16(r1)
|
|
stfd fr31,8(r1)
|
|
LDCONST(fr1, fpzero)
|
|
mffs fr31
|
|
MTFSF_L(fr1)
|
|
blr
|
|
|
|
fpdisable:
|
|
mtlr r12
|
|
MTFSF_L(fr31)
|
|
lfd fr31,8(r1)
|
|
lfd fr1,16(r1)
|
|
lfd fr0,24(r1)
|
|
mtmsr r10
|
|
isync
|
|
addi r1,r1,64
|
|
blr
|
|
|
|
/*
|
|
* Vector add, floating point.
|
|
*/
|
|
_GLOBAL(vaddfp)
|
|
mflr r12
|
|
bl fpenable
|
|
li r0,4
|
|
mtctr r0
|
|
li r6,0
|
|
1: lfsx fr0,r4,r6
|
|
lfsx fr1,r5,r6
|
|
fadds fr0,fr0,fr1
|
|
stfsx fr0,r3,r6
|
|
addi r6,r6,4
|
|
bdnz 1b
|
|
b fpdisable
|
|
|
|
/*
|
|
* Vector subtract, floating point.
|
|
*/
|
|
_GLOBAL(vsubfp)
|
|
mflr r12
|
|
bl fpenable
|
|
li r0,4
|
|
mtctr r0
|
|
li r6,0
|
|
1: lfsx fr0,r4,r6
|
|
lfsx fr1,r5,r6
|
|
fsubs fr0,fr0,fr1
|
|
stfsx fr0,r3,r6
|
|
addi r6,r6,4
|
|
bdnz 1b
|
|
b fpdisable
|
|
|
|
/*
|
|
* Vector multiply and add, floating point.
|
|
*/
|
|
_GLOBAL(vmaddfp)
|
|
mflr r12
|
|
bl fpenable
|
|
stfd fr2,32(r1)
|
|
li r0,4
|
|
mtctr r0
|
|
li r7,0
|
|
1: lfsx fr0,r4,r7
|
|
lfsx fr1,r5,r7
|
|
lfsx fr2,r6,r7
|
|
fmadds fr0,fr0,fr2,fr1
|
|
stfsx fr0,r3,r7
|
|
addi r7,r7,4
|
|
bdnz 1b
|
|
lfd fr2,32(r1)
|
|
b fpdisable
|
|
|
|
/*
|
|
* Vector negative multiply and subtract, floating point.
|
|
*/
|
|
_GLOBAL(vnmsubfp)
|
|
mflr r12
|
|
bl fpenable
|
|
stfd fr2,32(r1)
|
|
li r0,4
|
|
mtctr r0
|
|
li r7,0
|
|
1: lfsx fr0,r4,r7
|
|
lfsx fr1,r5,r7
|
|
lfsx fr2,r6,r7
|
|
fnmsubs fr0,fr0,fr2,fr1
|
|
stfsx fr0,r3,r7
|
|
addi r7,r7,4
|
|
bdnz 1b
|
|
lfd fr2,32(r1)
|
|
b fpdisable
|
|
|
|
/*
|
|
* Vector reciprocal estimate. We just compute 1.0/x.
|
|
* r3 -> destination, r4 -> source.
|
|
*/
|
|
_GLOBAL(vrefp)
|
|
mflr r12
|
|
bl fpenable
|
|
li r0,4
|
|
LDCONST(fr1, fpone)
|
|
mtctr r0
|
|
li r6,0
|
|
1: lfsx fr0,r4,r6
|
|
fdivs fr0,fr1,fr0
|
|
stfsx fr0,r3,r6
|
|
addi r6,r6,4
|
|
bdnz 1b
|
|
b fpdisable
|
|
|
|
/*
|
|
* Vector reciprocal square-root estimate, floating point.
|
|
* We use the frsqrte instruction for the initial estimate followed
|
|
* by 2 iterations of Newton-Raphson to get sufficient accuracy.
|
|
* r3 -> destination, r4 -> source.
|
|
*/
|
|
_GLOBAL(vrsqrtefp)
|
|
mflr r12
|
|
bl fpenable
|
|
stfd fr2,32(r1)
|
|
stfd fr3,40(r1)
|
|
stfd fr4,48(r1)
|
|
stfd fr5,56(r1)
|
|
li r0,4
|
|
LDCONST(fr4, fpone)
|
|
LDCONST(fr5, fphalf)
|
|
mtctr r0
|
|
li r6,0
|
|
1: lfsx fr0,r4,r6
|
|
frsqrte fr1,fr0 /* r = frsqrte(s) */
|
|
fmuls fr3,fr1,fr0 /* r * s */
|
|
fmuls fr2,fr1,fr5 /* r * 0.5 */
|
|
fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */
|
|
fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */
|
|
fmuls fr3,fr1,fr0 /* r * s */
|
|
fmuls fr2,fr1,fr5 /* r * 0.5 */
|
|
fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */
|
|
fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */
|
|
stfsx fr1,r3,r6
|
|
addi r6,r6,4
|
|
bdnz 1b
|
|
lfd fr5,56(r1)
|
|
lfd fr4,48(r1)
|
|
lfd fr3,40(r1)
|
|
lfd fr2,32(r1)
|
|
b fpdisable
|