linux_dsm_epyc7002/drivers/mmc/host/sdhci-of-arasan.c
Douglas Anderson 3ea4666e8d mmc: sdhci-of-arasan: Properly set corecfg_baseclkfreq on rk3399
In the the earlier change in this series ("Documentation: mmc:
sdhci-of-arasan: Add soc-ctl-syscon for corecfg regs") we can see the
mechansim for specifying a syscon to properly set corecfg registers in
sdhci-of-arasan.  Now let's use this mechanism to properly set
corecfg_baseclkfreq on rk3399.

>From [1] the corecfg_baseclkfreq is supposed to be set to:
  Base Clock Frequency for SD Clock.
  This is the frequency of the xin_clk.

This is a relatively easy thing to do.  Note that we assume that xin_clk
is not dynamic and we can check the clock at probe time.  If any real
devices have a dynamic xin_clk future patches could register for
notifiers for the clock.

At the moment, setting corecfg_baseclkfreq is only supported for rk3399
since we need a specific map for each implementation.  The code is
written in a generic way that should make this easy to extend to other
SoCs.  Note that a specific compatible string for rk3399 is already in
use and so we add that to the table to match rk3399.

[1]: https://arasan.com/wp-content/media/eMMC-5-1-Total-Solution_Rev-1-3.pdf

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25 10:34:18 +02:00

494 lines
13 KiB
C

/*
* Arasan Secure Digital Host Controller Interface.
* Copyright (C) 2011 - 2012 Michal Simek <monstr@monstr.eu>
* Copyright (c) 2012 Wind River Systems, Inc.
* Copyright (C) 2013 Pengutronix e.K.
* Copyright (C) 2013 Xilinx Inc.
*
* Based on sdhci-of-esdhc.c
*
* Copyright (c) 2007 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
*
* Authors: Xiaobo Xie <X.Xie@freescale.com>
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include "sdhci-pltfm.h"
#define SDHCI_ARASAN_CLK_CTRL_OFFSET 0x2c
#define SDHCI_ARASAN_VENDOR_REGISTER 0x78
#define VENDOR_ENHANCED_STROBE BIT(0)
#define CLK_CTRL_TIMEOUT_SHIFT 16
#define CLK_CTRL_TIMEOUT_MASK (0xf << CLK_CTRL_TIMEOUT_SHIFT)
#define CLK_CTRL_TIMEOUT_MIN_EXP 13
/*
* On some SoCs the syscon area has a feature where the upper 16-bits of
* each 32-bit register act as a write mask for the lower 16-bits. This allows
* atomic updates of the register without locking. This macro is used on SoCs
* that have that feature.
*/
#define HIWORD_UPDATE(val, mask, shift) \
((val) << (shift) | (mask) << ((shift) + 16))
/**
* struct sdhci_arasan_soc_ctl_field - Field used in sdhci_arasan_soc_ctl_map
*
* @reg: Offset within the syscon of the register containing this field
* @width: Number of bits for this field
* @shift: Bit offset within @reg of this field (or -1 if not avail)
*/
struct sdhci_arasan_soc_ctl_field {
u32 reg;
u16 width;
s16 shift;
};
/**
* struct sdhci_arasan_soc_ctl_map - Map in syscon to corecfg registers
*
* It's up to the licensee of the Arsan IP block to make these available
* somewhere if needed. Presumably these will be scattered somewhere that's
* accessible via the syscon API.
*
* @baseclkfreq: Where to find corecfg_baseclkfreq
* @hiword_update: If true, use HIWORD_UPDATE to access the syscon
*/
struct sdhci_arasan_soc_ctl_map {
struct sdhci_arasan_soc_ctl_field baseclkfreq;
bool hiword_update;
};
/**
* struct sdhci_arasan_data
* @clk_ahb: Pointer to the AHB clock
* @phy: Pointer to the generic phy
* @phy_on: True if the PHY is turned on.
* @soc_ctl_base: Pointer to regmap for syscon for soc_ctl registers.
* @soc_ctl_map: Map to get offsets into soc_ctl registers.
*/
struct sdhci_arasan_data {
struct clk *clk_ahb;
struct phy *phy;
bool phy_on;
struct regmap *soc_ctl_base;
const struct sdhci_arasan_soc_ctl_map *soc_ctl_map;
};
static const struct sdhci_arasan_soc_ctl_map rk3399_soc_ctl_map = {
.baseclkfreq = { .reg = 0xf000, .width = 8, .shift = 8 },
.hiword_update = true,
};
/**
* sdhci_arasan_syscon_write - Write to a field in soc_ctl registers
*
* This function allows writing to fields in sdhci_arasan_soc_ctl_map.
* Note that if a field is specified as not available (shift < 0) then
* this function will silently return an error code. It will be noisy
* and print errors for any other (unexpected) errors.
*
* @host: The sdhci_host
* @fld: The field to write to
* @val: The value to write
*/
static int sdhci_arasan_syscon_write(struct sdhci_host *host,
const struct sdhci_arasan_soc_ctl_field *fld,
u32 val)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
struct regmap *soc_ctl_base = sdhci_arasan->soc_ctl_base;
u32 reg = fld->reg;
u16 width = fld->width;
s16 shift = fld->shift;
int ret;
/*
* Silently return errors for shift < 0 so caller doesn't have
* to check for fields which are optional. For fields that
* are required then caller needs to do something special
* anyway.
*/
if (shift < 0)
return -EINVAL;
if (sdhci_arasan->soc_ctl_map->hiword_update)
ret = regmap_write(soc_ctl_base, reg,
HIWORD_UPDATE(val, GENMASK(width, 0),
shift));
else
ret = regmap_update_bits(soc_ctl_base, reg,
GENMASK(shift + width, shift),
val << shift);
/* Yell about (unexpected) regmap errors */
if (ret)
pr_warn("%s: Regmap write fail: %d\n",
mmc_hostname(host->mmc), ret);
return ret;
}
static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
{
u32 div;
unsigned long freq;
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
div = readl(host->ioaddr + SDHCI_ARASAN_CLK_CTRL_OFFSET);
div = (div & CLK_CTRL_TIMEOUT_MASK) >> CLK_CTRL_TIMEOUT_SHIFT;
freq = clk_get_rate(pltfm_host->clk);
freq /= 1 << (CLK_CTRL_TIMEOUT_MIN_EXP + div);
return freq;
}
static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
if (sdhci_arasan->phy_on && !IS_ERR(sdhci_arasan->phy)) {
sdhci_arasan->phy_on = false;
spin_unlock_irq(&host->lock);
phy_power_off(sdhci_arasan->phy);
spin_lock_irq(&host->lock);
}
sdhci_set_clock(host, clock);
if (host->mmc->actual_clock && !IS_ERR(sdhci_arasan->phy)) {
sdhci_arasan->phy_on = true;
spin_unlock_irq(&host->lock);
phy_power_on(sdhci_arasan->phy);
spin_lock_irq(&host->lock);
}
}
static void sdhci_arasan_hs400_enhanced_strobe(struct mmc_host *mmc,
struct mmc_ios *ios)
{
u32 vendor;
struct sdhci_host *host = mmc_priv(mmc);
vendor = readl(host->ioaddr + SDHCI_ARASAN_VENDOR_REGISTER);
if (ios->enhanced_strobe)
vendor |= VENDOR_ENHANCED_STROBE;
else
vendor &= ~VENDOR_ENHANCED_STROBE;
writel(vendor, host->ioaddr + SDHCI_ARASAN_VENDOR_REGISTER);
}
static struct sdhci_ops sdhci_arasan_ops = {
.set_clock = sdhci_arasan_set_clock,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.get_timeout_clock = sdhci_arasan_get_timeout_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
};
static struct sdhci_pltfm_data sdhci_arasan_pdata = {
.ops = &sdhci_arasan_ops,
.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN,
};
#ifdef CONFIG_PM_SLEEP
/**
* sdhci_arasan_suspend - Suspend method for the driver
* @dev: Address of the device structure
* Returns 0 on success and error value on error
*
* Put the device in a low power state.
*/
static int sdhci_arasan_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
int ret;
ret = sdhci_suspend_host(host);
if (ret)
return ret;
if (!IS_ERR(sdhci_arasan->phy)) {
ret = phy_power_off(sdhci_arasan->phy);
if (ret) {
dev_err(dev, "Cannot power off phy.\n");
sdhci_resume_host(host);
return ret;
}
}
clk_disable(pltfm_host->clk);
clk_disable(sdhci_arasan->clk_ahb);
return 0;
}
/**
* sdhci_arasan_resume - Resume method for the driver
* @dev: Address of the device structure
* Returns 0 on success and error value on error
*
* Resume operation after suspend
*/
static int sdhci_arasan_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
int ret;
ret = clk_enable(sdhci_arasan->clk_ahb);
if (ret) {
dev_err(dev, "Cannot enable AHB clock.\n");
return ret;
}
ret = clk_enable(pltfm_host->clk);
if (ret) {
dev_err(dev, "Cannot enable SD clock.\n");
return ret;
}
if (!IS_ERR(sdhci_arasan->phy)) {
ret = phy_power_on(sdhci_arasan->phy);
if (ret) {
dev_err(dev, "Cannot power on phy.\n");
return ret;
}
}
return sdhci_resume_host(host);
}
#endif /* ! CONFIG_PM_SLEEP */
static SIMPLE_DEV_PM_OPS(sdhci_arasan_dev_pm_ops, sdhci_arasan_suspend,
sdhci_arasan_resume);
static const struct of_device_id sdhci_arasan_of_match[] = {
/* SoC-specific compatible strings w/ soc_ctl_map */
{
.compatible = "rockchip,rk3399-sdhci-5.1",
.data = &rk3399_soc_ctl_map,
},
/* Generic compatible below here */
{ .compatible = "arasan,sdhci-8.9a" },
{ .compatible = "arasan,sdhci-5.1" },
{ .compatible = "arasan,sdhci-4.9a" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
/**
* sdhci_arasan_update_baseclkfreq - Set corecfg_baseclkfreq
*
* The corecfg_baseclkfreq is supposed to contain the MHz of clk_xin. This
* function can be used to make that happen.
*
* NOTES:
* - Many existing devices don't seem to do this and work fine. To keep
* compatibility for old hardware where the device tree doesn't provide a
* register map, this function is a noop if a soc_ctl_map hasn't been provided
* for this platform.
* - It's assumed that clk_xin is not dynamic and that we use the SDHCI divider
* to achieve lower clock rates. That means that this function is called once
* at probe time and never called again.
*
* @host: The sdhci_host
*/
static void sdhci_arasan_update_baseclkfreq(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
const struct sdhci_arasan_soc_ctl_map *soc_ctl_map =
sdhci_arasan->soc_ctl_map;
u32 mhz = DIV_ROUND_CLOSEST(clk_get_rate(pltfm_host->clk), 1000000);
/* Having a map is optional */
if (!soc_ctl_map)
return;
/* If we have a map, we expect to have a syscon */
if (!sdhci_arasan->soc_ctl_base) {
pr_warn("%s: Have regmap, but no soc-ctl-syscon\n",
mmc_hostname(host->mmc));
return;
}
sdhci_arasan_syscon_write(host, &soc_ctl_map->baseclkfreq, mhz);
}
static int sdhci_arasan_probe(struct platform_device *pdev)
{
int ret;
const struct of_device_id *match;
struct device_node *node;
struct clk *clk_xin;
struct sdhci_host *host;
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_arasan_data *sdhci_arasan;
host = sdhci_pltfm_init(pdev, &sdhci_arasan_pdata,
sizeof(*sdhci_arasan));
if (IS_ERR(host))
return PTR_ERR(host);
pltfm_host = sdhci_priv(host);
sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
match = of_match_node(sdhci_arasan_of_match, pdev->dev.of_node);
sdhci_arasan->soc_ctl_map = match->data;
node = of_parse_phandle(pdev->dev.of_node, "arasan,soc-ctl-syscon", 0);
if (node) {
sdhci_arasan->soc_ctl_base = syscon_node_to_regmap(node);
of_node_put(node);
if (IS_ERR(sdhci_arasan->soc_ctl_base)) {
ret = PTR_ERR(sdhci_arasan->soc_ctl_base);
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev, "Can't get syscon: %d\n",
ret);
goto err_pltfm_free;
}
}
sdhci_arasan->clk_ahb = devm_clk_get(&pdev->dev, "clk_ahb");
if (IS_ERR(sdhci_arasan->clk_ahb)) {
dev_err(&pdev->dev, "clk_ahb clock not found.\n");
ret = PTR_ERR(sdhci_arasan->clk_ahb);
goto err_pltfm_free;
}
clk_xin = devm_clk_get(&pdev->dev, "clk_xin");
if (IS_ERR(clk_xin)) {
dev_err(&pdev->dev, "clk_xin clock not found.\n");
ret = PTR_ERR(clk_xin);
goto err_pltfm_free;
}
ret = clk_prepare_enable(sdhci_arasan->clk_ahb);
if (ret) {
dev_err(&pdev->dev, "Unable to enable AHB clock.\n");
goto err_pltfm_free;
}
ret = clk_prepare_enable(clk_xin);
if (ret) {
dev_err(&pdev->dev, "Unable to enable SD clock.\n");
goto clk_dis_ahb;
}
sdhci_get_of_property(pdev);
pltfm_host->clk = clk_xin;
sdhci_arasan_update_baseclkfreq(host);
ret = mmc_of_parse(host->mmc);
if (ret) {
dev_err(&pdev->dev, "parsing dt failed (%u)\n", ret);
goto clk_disable_all;
}
sdhci_arasan->phy = ERR_PTR(-ENODEV);
if (of_device_is_compatible(pdev->dev.of_node,
"arasan,sdhci-5.1")) {
sdhci_arasan->phy = devm_phy_get(&pdev->dev,
"phy_arasan");
if (IS_ERR(sdhci_arasan->phy)) {
ret = PTR_ERR(sdhci_arasan->phy);
dev_err(&pdev->dev, "No phy for arasan,sdhci-5.1.\n");
goto clk_disable_all;
}
ret = phy_init(sdhci_arasan->phy);
if (ret < 0) {
dev_err(&pdev->dev, "phy_init err.\n");
goto clk_disable_all;
}
host->mmc_host_ops.hs400_enhanced_strobe =
sdhci_arasan_hs400_enhanced_strobe;
}
ret = sdhci_add_host(host);
if (ret)
goto err_add_host;
return 0;
err_add_host:
if (!IS_ERR(sdhci_arasan->phy))
phy_exit(sdhci_arasan->phy);
clk_disable_all:
clk_disable_unprepare(clk_xin);
clk_dis_ahb:
clk_disable_unprepare(sdhci_arasan->clk_ahb);
err_pltfm_free:
sdhci_pltfm_free(pdev);
return ret;
}
static int sdhci_arasan_remove(struct platform_device *pdev)
{
int ret;
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
struct clk *clk_ahb = sdhci_arasan->clk_ahb;
if (!IS_ERR(sdhci_arasan->phy)) {
phy_power_off(sdhci_arasan->phy);
phy_exit(sdhci_arasan->phy);
}
ret = sdhci_pltfm_unregister(pdev);
clk_disable_unprepare(clk_ahb);
return ret;
}
static struct platform_driver sdhci_arasan_driver = {
.driver = {
.name = "sdhci-arasan",
.of_match_table = sdhci_arasan_of_match,
.pm = &sdhci_arasan_dev_pm_ops,
},
.probe = sdhci_arasan_probe,
.remove = sdhci_arasan_remove,
};
module_platform_driver(sdhci_arasan_driver);
MODULE_DESCRIPTION("Driver for the Arasan SDHCI Controller");
MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com>");
MODULE_LICENSE("GPL");