mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 04:25:29 +07:00
184a394eea
Spectral scan supported by ath10k has capability to monitor and report through whole bands and channels, but current buffer size is too small to save reported spectral scan data. This results in dropping 5G channel reports at all when dual band card is used, so that users are not able to analyze spectral environments. Hence increase the buffer size to fix the problem. A spectral data size is vary based on the number of bins, so the unit buffer size, 1140, is chose to minimize relay buffer fragmentation. The total buffer size is also chose in tradeoff with spectral scan support vs. kernel memory consumption. Since theoretical maximum buffer size, 9.5MB, can be consumed with 512 bins in dual bands, we target to cover up to 128 bins for all channels in dual bands and due to the buffer size limitation, spectral scan with bin number bigger than 128 needs to be run on single band each. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
552 lines
14 KiB
C
552 lines
14 KiB
C
/*
|
|
* Copyright (c) 2013 Qualcomm Atheros, Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/relay.h>
|
|
#include "core.h"
|
|
#include "debug.h"
|
|
#include "wmi-ops.h"
|
|
|
|
static void send_fft_sample(struct ath10k *ar,
|
|
const struct fft_sample_tlv *fft_sample_tlv)
|
|
{
|
|
int length;
|
|
|
|
if (!ar->spectral.rfs_chan_spec_scan)
|
|
return;
|
|
|
|
length = __be16_to_cpu(fft_sample_tlv->length) +
|
|
sizeof(*fft_sample_tlv);
|
|
relay_write(ar->spectral.rfs_chan_spec_scan, fft_sample_tlv, length);
|
|
}
|
|
|
|
static uint8_t get_max_exp(s8 max_index, u16 max_magnitude, size_t bin_len,
|
|
u8 *data)
|
|
{
|
|
int dc_pos;
|
|
u8 max_exp;
|
|
|
|
dc_pos = bin_len / 2;
|
|
|
|
/* peak index outside of bins */
|
|
if (dc_pos < max_index || -dc_pos >= max_index)
|
|
return 0;
|
|
|
|
for (max_exp = 0; max_exp < 8; max_exp++) {
|
|
if (data[dc_pos + max_index] == (max_magnitude >> max_exp))
|
|
break;
|
|
}
|
|
|
|
/* max_exp not found */
|
|
if (data[dc_pos + max_index] != (max_magnitude >> max_exp))
|
|
return 0;
|
|
|
|
return max_exp;
|
|
}
|
|
|
|
int ath10k_spectral_process_fft(struct ath10k *ar,
|
|
const struct wmi_phyerr *phyerr,
|
|
const struct phyerr_fft_report *fftr,
|
|
size_t bin_len, u64 tsf)
|
|
{
|
|
struct fft_sample_ath10k *fft_sample;
|
|
u8 buf[sizeof(*fft_sample) + SPECTRAL_ATH10K_MAX_NUM_BINS];
|
|
u16 freq1, freq2, total_gain_db, base_pwr_db, length, peak_mag;
|
|
u32 reg0, reg1;
|
|
u8 chain_idx, *bins;
|
|
int dc_pos;
|
|
|
|
fft_sample = (struct fft_sample_ath10k *)&buf;
|
|
|
|
if (bin_len < 64 || bin_len > SPECTRAL_ATH10K_MAX_NUM_BINS)
|
|
return -EINVAL;
|
|
|
|
reg0 = __le32_to_cpu(fftr->reg0);
|
|
reg1 = __le32_to_cpu(fftr->reg1);
|
|
|
|
length = sizeof(*fft_sample) - sizeof(struct fft_sample_tlv) + bin_len;
|
|
fft_sample->tlv.type = ATH_FFT_SAMPLE_ATH10K;
|
|
fft_sample->tlv.length = __cpu_to_be16(length);
|
|
|
|
/* TODO: there might be a reason why the hardware reports 20/40/80 MHz,
|
|
* but the results/plots suggest that its actually 22/44/88 MHz.
|
|
*/
|
|
switch (phyerr->chan_width_mhz) {
|
|
case 20:
|
|
fft_sample->chan_width_mhz = 22;
|
|
break;
|
|
case 40:
|
|
fft_sample->chan_width_mhz = 44;
|
|
break;
|
|
case 80:
|
|
/* TODO: As experiments with an analogue sender and various
|
|
* configuaritions (fft-sizes of 64/128/256 and 20/40/80 Mhz)
|
|
* show, the particular configuration of 80 MHz/64 bins does
|
|
* not match with the other smaples at all. Until the reason
|
|
* for that is found, don't report these samples.
|
|
*/
|
|
if (bin_len == 64)
|
|
return -EINVAL;
|
|
fft_sample->chan_width_mhz = 88;
|
|
break;
|
|
default:
|
|
fft_sample->chan_width_mhz = phyerr->chan_width_mhz;
|
|
}
|
|
|
|
fft_sample->relpwr_db = MS(reg1, SEARCH_FFT_REPORT_REG1_RELPWR_DB);
|
|
fft_sample->avgpwr_db = MS(reg1, SEARCH_FFT_REPORT_REG1_AVGPWR_DB);
|
|
|
|
peak_mag = MS(reg1, SEARCH_FFT_REPORT_REG1_PEAK_MAG);
|
|
fft_sample->max_magnitude = __cpu_to_be16(peak_mag);
|
|
fft_sample->max_index = MS(reg0, SEARCH_FFT_REPORT_REG0_PEAK_SIDX);
|
|
fft_sample->rssi = phyerr->rssi_combined;
|
|
|
|
total_gain_db = MS(reg0, SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB);
|
|
base_pwr_db = MS(reg0, SEARCH_FFT_REPORT_REG0_BASE_PWR_DB);
|
|
fft_sample->total_gain_db = __cpu_to_be16(total_gain_db);
|
|
fft_sample->base_pwr_db = __cpu_to_be16(base_pwr_db);
|
|
|
|
freq1 = __le16_to_cpu(phyerr->freq1);
|
|
freq2 = __le16_to_cpu(phyerr->freq2);
|
|
fft_sample->freq1 = __cpu_to_be16(freq1);
|
|
fft_sample->freq2 = __cpu_to_be16(freq2);
|
|
|
|
chain_idx = MS(reg0, SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX);
|
|
|
|
fft_sample->noise = __cpu_to_be16(
|
|
__le16_to_cpu(phyerr->nf_chains[chain_idx]));
|
|
|
|
bins = (u8 *)fftr;
|
|
bins += sizeof(*fftr);
|
|
|
|
fft_sample->tsf = __cpu_to_be64(tsf);
|
|
|
|
/* max_exp has been directly reported by previous hardware (ath9k),
|
|
* maybe its possible to get it by other means?
|
|
*/
|
|
fft_sample->max_exp = get_max_exp(fft_sample->max_index, peak_mag,
|
|
bin_len, bins);
|
|
|
|
memcpy(fft_sample->data, bins, bin_len);
|
|
|
|
/* DC value (value in the middle) is the blind spot of the spectral
|
|
* sample and invalid, interpolate it.
|
|
*/
|
|
dc_pos = bin_len / 2;
|
|
fft_sample->data[dc_pos] = (fft_sample->data[dc_pos + 1] +
|
|
fft_sample->data[dc_pos - 1]) / 2;
|
|
|
|
send_fft_sample(ar, &fft_sample->tlv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ath10k_vif *ath10k_get_spectral_vdev(struct ath10k *ar)
|
|
{
|
|
struct ath10k_vif *arvif;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
if (list_empty(&ar->arvifs))
|
|
return NULL;
|
|
|
|
/* if there already is a vif doing spectral, return that. */
|
|
list_for_each_entry(arvif, &ar->arvifs, list)
|
|
if (arvif->spectral_enabled)
|
|
return arvif;
|
|
|
|
/* otherwise, return the first vif. */
|
|
return list_first_entry(&ar->arvifs, typeof(*arvif), list);
|
|
}
|
|
|
|
static int ath10k_spectral_scan_trigger(struct ath10k *ar)
|
|
{
|
|
struct ath10k_vif *arvif;
|
|
int res;
|
|
int vdev_id;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
arvif = ath10k_get_spectral_vdev(ar);
|
|
if (!arvif)
|
|
return -ENODEV;
|
|
vdev_id = arvif->vdev_id;
|
|
|
|
if (ar->spectral.mode == SPECTRAL_DISABLED)
|
|
return 0;
|
|
|
|
res = ath10k_wmi_vdev_spectral_enable(ar, vdev_id,
|
|
WMI_SPECTRAL_TRIGGER_CMD_CLEAR,
|
|
WMI_SPECTRAL_ENABLE_CMD_ENABLE);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
res = ath10k_wmi_vdev_spectral_enable(ar, vdev_id,
|
|
WMI_SPECTRAL_TRIGGER_CMD_TRIGGER,
|
|
WMI_SPECTRAL_ENABLE_CMD_ENABLE);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_spectral_scan_config(struct ath10k *ar,
|
|
enum ath10k_spectral_mode mode)
|
|
{
|
|
struct wmi_vdev_spectral_conf_arg arg;
|
|
struct ath10k_vif *arvif;
|
|
int vdev_id, count, res = 0;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
arvif = ath10k_get_spectral_vdev(ar);
|
|
if (!arvif)
|
|
return -ENODEV;
|
|
|
|
vdev_id = arvif->vdev_id;
|
|
|
|
arvif->spectral_enabled = (mode != SPECTRAL_DISABLED);
|
|
ar->spectral.mode = mode;
|
|
|
|
res = ath10k_wmi_vdev_spectral_enable(ar, vdev_id,
|
|
WMI_SPECTRAL_TRIGGER_CMD_CLEAR,
|
|
WMI_SPECTRAL_ENABLE_CMD_DISABLE);
|
|
if (res < 0) {
|
|
ath10k_warn(ar, "failed to enable spectral scan: %d\n", res);
|
|
return res;
|
|
}
|
|
|
|
if (mode == SPECTRAL_DISABLED)
|
|
return 0;
|
|
|
|
if (mode == SPECTRAL_BACKGROUND)
|
|
count = WMI_SPECTRAL_COUNT_DEFAULT;
|
|
else
|
|
count = max_t(u8, 1, ar->spectral.config.count);
|
|
|
|
arg.vdev_id = vdev_id;
|
|
arg.scan_count = count;
|
|
arg.scan_period = WMI_SPECTRAL_PERIOD_DEFAULT;
|
|
arg.scan_priority = WMI_SPECTRAL_PRIORITY_DEFAULT;
|
|
arg.scan_fft_size = ar->spectral.config.fft_size;
|
|
arg.scan_gc_ena = WMI_SPECTRAL_GC_ENA_DEFAULT;
|
|
arg.scan_restart_ena = WMI_SPECTRAL_RESTART_ENA_DEFAULT;
|
|
arg.scan_noise_floor_ref = WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT;
|
|
arg.scan_init_delay = WMI_SPECTRAL_INIT_DELAY_DEFAULT;
|
|
arg.scan_nb_tone_thr = WMI_SPECTRAL_NB_TONE_THR_DEFAULT;
|
|
arg.scan_str_bin_thr = WMI_SPECTRAL_STR_BIN_THR_DEFAULT;
|
|
arg.scan_wb_rpt_mode = WMI_SPECTRAL_WB_RPT_MODE_DEFAULT;
|
|
arg.scan_rssi_rpt_mode = WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT;
|
|
arg.scan_rssi_thr = WMI_SPECTRAL_RSSI_THR_DEFAULT;
|
|
arg.scan_pwr_format = WMI_SPECTRAL_PWR_FORMAT_DEFAULT;
|
|
arg.scan_rpt_mode = WMI_SPECTRAL_RPT_MODE_DEFAULT;
|
|
arg.scan_bin_scale = WMI_SPECTRAL_BIN_SCALE_DEFAULT;
|
|
arg.scan_dbm_adj = WMI_SPECTRAL_DBM_ADJ_DEFAULT;
|
|
arg.scan_chn_mask = WMI_SPECTRAL_CHN_MASK_DEFAULT;
|
|
|
|
res = ath10k_wmi_vdev_spectral_conf(ar, &arg);
|
|
if (res < 0) {
|
|
ath10k_warn(ar, "failed to configure spectral scan: %d\n", res);
|
|
return res;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t read_file_spec_scan_ctl(struct file *file, char __user *user_buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct ath10k *ar = file->private_data;
|
|
char *mode = "";
|
|
unsigned int len;
|
|
enum ath10k_spectral_mode spectral_mode;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
spectral_mode = ar->spectral.mode;
|
|
mutex_unlock(&ar->conf_mutex);
|
|
|
|
switch (spectral_mode) {
|
|
case SPECTRAL_DISABLED:
|
|
mode = "disable";
|
|
break;
|
|
case SPECTRAL_BACKGROUND:
|
|
mode = "background";
|
|
break;
|
|
case SPECTRAL_MANUAL:
|
|
mode = "manual";
|
|
break;
|
|
}
|
|
|
|
len = strlen(mode);
|
|
return simple_read_from_buffer(user_buf, count, ppos, mode, len);
|
|
}
|
|
|
|
static ssize_t write_file_spec_scan_ctl(struct file *file,
|
|
const char __user *user_buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct ath10k *ar = file->private_data;
|
|
char buf[32];
|
|
ssize_t len;
|
|
int res;
|
|
|
|
len = min(count, sizeof(buf) - 1);
|
|
if (copy_from_user(buf, user_buf, len))
|
|
return -EFAULT;
|
|
|
|
buf[len] = '\0';
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
if (strncmp("trigger", buf, 7) == 0) {
|
|
if (ar->spectral.mode == SPECTRAL_MANUAL ||
|
|
ar->spectral.mode == SPECTRAL_BACKGROUND) {
|
|
/* reset the configuration to adopt possibly changed
|
|
* debugfs parameters
|
|
*/
|
|
res = ath10k_spectral_scan_config(ar,
|
|
ar->spectral.mode);
|
|
if (res < 0) {
|
|
ath10k_warn(ar, "failed to reconfigure spectral scan: %d\n",
|
|
res);
|
|
}
|
|
res = ath10k_spectral_scan_trigger(ar);
|
|
if (res < 0) {
|
|
ath10k_warn(ar, "failed to trigger spectral scan: %d\n",
|
|
res);
|
|
}
|
|
} else {
|
|
res = -EINVAL;
|
|
}
|
|
} else if (strncmp("background", buf, 9) == 0) {
|
|
res = ath10k_spectral_scan_config(ar, SPECTRAL_BACKGROUND);
|
|
} else if (strncmp("manual", buf, 6) == 0) {
|
|
res = ath10k_spectral_scan_config(ar, SPECTRAL_MANUAL);
|
|
} else if (strncmp("disable", buf, 7) == 0) {
|
|
res = ath10k_spectral_scan_config(ar, SPECTRAL_DISABLED);
|
|
} else {
|
|
res = -EINVAL;
|
|
}
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
|
|
if (res < 0)
|
|
return res;
|
|
|
|
return count;
|
|
}
|
|
|
|
static const struct file_operations fops_spec_scan_ctl = {
|
|
.read = read_file_spec_scan_ctl,
|
|
.write = write_file_spec_scan_ctl,
|
|
.open = simple_open,
|
|
.owner = THIS_MODULE,
|
|
.llseek = default_llseek,
|
|
};
|
|
|
|
static ssize_t read_file_spectral_count(struct file *file,
|
|
char __user *user_buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct ath10k *ar = file->private_data;
|
|
char buf[32];
|
|
unsigned int len;
|
|
u8 spectral_count;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
spectral_count = ar->spectral.config.count;
|
|
mutex_unlock(&ar->conf_mutex);
|
|
|
|
len = sprintf(buf, "%d\n", spectral_count);
|
|
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
|
|
}
|
|
|
|
static ssize_t write_file_spectral_count(struct file *file,
|
|
const char __user *user_buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct ath10k *ar = file->private_data;
|
|
unsigned long val;
|
|
char buf[32];
|
|
ssize_t len;
|
|
|
|
len = min(count, sizeof(buf) - 1);
|
|
if (copy_from_user(buf, user_buf, len))
|
|
return -EFAULT;
|
|
|
|
buf[len] = '\0';
|
|
if (kstrtoul(buf, 0, &val))
|
|
return -EINVAL;
|
|
|
|
if (val < 0 || val > 255)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
ar->spectral.config.count = val;
|
|
mutex_unlock(&ar->conf_mutex);
|
|
|
|
return count;
|
|
}
|
|
|
|
static const struct file_operations fops_spectral_count = {
|
|
.read = read_file_spectral_count,
|
|
.write = write_file_spectral_count,
|
|
.open = simple_open,
|
|
.owner = THIS_MODULE,
|
|
.llseek = default_llseek,
|
|
};
|
|
|
|
static ssize_t read_file_spectral_bins(struct file *file,
|
|
char __user *user_buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct ath10k *ar = file->private_data;
|
|
char buf[32];
|
|
unsigned int len, bins, fft_size, bin_scale;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
fft_size = ar->spectral.config.fft_size;
|
|
bin_scale = WMI_SPECTRAL_BIN_SCALE_DEFAULT;
|
|
bins = 1 << (fft_size - bin_scale);
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
|
|
len = sprintf(buf, "%d\n", bins);
|
|
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
|
|
}
|
|
|
|
static ssize_t write_file_spectral_bins(struct file *file,
|
|
const char __user *user_buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct ath10k *ar = file->private_data;
|
|
unsigned long val;
|
|
char buf[32];
|
|
ssize_t len;
|
|
|
|
len = min(count, sizeof(buf) - 1);
|
|
if (copy_from_user(buf, user_buf, len))
|
|
return -EFAULT;
|
|
|
|
buf[len] = '\0';
|
|
if (kstrtoul(buf, 0, &val))
|
|
return -EINVAL;
|
|
|
|
if (val < 64 || val > SPECTRAL_ATH10K_MAX_NUM_BINS)
|
|
return -EINVAL;
|
|
|
|
if (!is_power_of_2(val))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
ar->spectral.config.fft_size = ilog2(val);
|
|
ar->spectral.config.fft_size += WMI_SPECTRAL_BIN_SCALE_DEFAULT;
|
|
mutex_unlock(&ar->conf_mutex);
|
|
|
|
return count;
|
|
}
|
|
|
|
static const struct file_operations fops_spectral_bins = {
|
|
.read = read_file_spectral_bins,
|
|
.write = write_file_spectral_bins,
|
|
.open = simple_open,
|
|
.owner = THIS_MODULE,
|
|
.llseek = default_llseek,
|
|
};
|
|
|
|
static struct dentry *create_buf_file_handler(const char *filename,
|
|
struct dentry *parent,
|
|
umode_t mode,
|
|
struct rchan_buf *buf,
|
|
int *is_global)
|
|
{
|
|
struct dentry *buf_file;
|
|
|
|
buf_file = debugfs_create_file(filename, mode, parent, buf,
|
|
&relay_file_operations);
|
|
*is_global = 1;
|
|
return buf_file;
|
|
}
|
|
|
|
static int remove_buf_file_handler(struct dentry *dentry)
|
|
{
|
|
debugfs_remove(dentry);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct rchan_callbacks rfs_spec_scan_cb = {
|
|
.create_buf_file = create_buf_file_handler,
|
|
.remove_buf_file = remove_buf_file_handler,
|
|
};
|
|
|
|
int ath10k_spectral_start(struct ath10k *ar)
|
|
{
|
|
struct ath10k_vif *arvif;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
list_for_each_entry(arvif, &ar->arvifs, list)
|
|
arvif->spectral_enabled = 0;
|
|
|
|
ar->spectral.mode = SPECTRAL_DISABLED;
|
|
ar->spectral.config.count = WMI_SPECTRAL_COUNT_DEFAULT;
|
|
ar->spectral.config.fft_size = WMI_SPECTRAL_FFT_SIZE_DEFAULT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ath10k_spectral_vif_stop(struct ath10k_vif *arvif)
|
|
{
|
|
if (!arvif->spectral_enabled)
|
|
return 0;
|
|
|
|
return ath10k_spectral_scan_config(arvif->ar, SPECTRAL_DISABLED);
|
|
}
|
|
|
|
int ath10k_spectral_create(struct ath10k *ar)
|
|
{
|
|
/* The buffer size covers whole channels in dual bands up to 128 bins.
|
|
* Scan with bigger than 128 bins needs to be run on single band each.
|
|
*/
|
|
ar->spectral.rfs_chan_spec_scan = relay_open("spectral_scan",
|
|
ar->debug.debugfs_phy,
|
|
1140, 2500,
|
|
&rfs_spec_scan_cb, NULL);
|
|
debugfs_create_file("spectral_scan_ctl",
|
|
S_IRUSR | S_IWUSR,
|
|
ar->debug.debugfs_phy, ar,
|
|
&fops_spec_scan_ctl);
|
|
debugfs_create_file("spectral_count",
|
|
S_IRUSR | S_IWUSR,
|
|
ar->debug.debugfs_phy, ar,
|
|
&fops_spectral_count);
|
|
debugfs_create_file("spectral_bins",
|
|
S_IRUSR | S_IWUSR,
|
|
ar->debug.debugfs_phy, ar,
|
|
&fops_spectral_bins);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ath10k_spectral_destroy(struct ath10k *ar)
|
|
{
|
|
if (ar->spectral.rfs_chan_spec_scan) {
|
|
relay_close(ar->spectral.rfs_chan_spec_scan);
|
|
ar->spectral.rfs_chan_spec_scan = NULL;
|
|
}
|
|
}
|