linux_dsm_epyc7002/drivers/regulator/arizona-ldo1.c
Linus Torvalds 4570a37169 sound updates for 4.2-rc1
It was a busy development cycle at this time, as you can see a wide
 range of changes in diffstat.  There are no big changes but many
 refactoring and improvements.  Here we go some highlights:
 
 * ALSA core:
 - Procfs codes were cleaned up to use seq_file
 - Procfs can be opt out via Kconfig (only for EXPERT)
 - Two types of jack API were unified finally; now both kctl and input
   jack devs are handled via a single function call.
 
 * HD-audio
 - Continued code restructuring for the future ASoC driver; now HDA
   controller driver is split to a core helper module.
 - Preliminary codes for Skylake audio support in HDA core.
 - Proper i915 gfx power well management for SKL & co
 - Enabled runtime PM as default for Intel HDMI/DP codecs
 - Newer Tegra chip supports
 - More quirks for Dell headsets, Alienware (with CA0132), etc.
 - A couple of DRM ELD helper API functions
 
 * ASoC
 - Support for loading ASoC topology maps from firmware, intended to be
   used to allow self-describing DSP firmware images to be built which
   can map controls added by the DSP to userspace without the kernel
   needing to know about individual DSP firmwares
 - Lots of refactoring to avoid direct access to snd_soc_codec where
   it's not needed supporting future refactoring
 - Big refactoring, cleanup and enhancement for the Wolfson ADSP driver
 - Cleanup series for TI TAS2552 and R-CAR drivers
 - Fixes and improvements on RT56xx codecs
 - Support for TI TAS571x power amplifiers
 - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs
 - Support for x86 systems with RT5650 and Qualcomm Storm
 - Support for Mediatek AFE (Audio Front End) unit
 - Other various small fixes to ASoC codec drivers
 
 * Firewire
 - Enhanced to allow non-blocking streams to use timestamp
   synchronization
 - Improve support for DM1500 and BeBoBv3
 
 * Misc
 - Cleanup of old pci API functions over all PCI sound drivers
 - Fix long-standing regression of the old powermac i2c setup
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVitjmAAoJEGwxgFQ9KSmksW8P/2ngNzNpo/bmmGh6xjB7GWU9
 RDAkqhKd6yvcClQojGS9n4a9CJ8nk5tdqTr9rMp58N7DRv6GYCPdq0A+lLOih+yC
 UPcTkTMBKm6UtvJjEcaasMxhvs5xno345oo5KrBdvlfv1rXe83dTtzEsybWYkaVD
 dJbbr5QFaiyj5cTp9nanK5kyTyDDXCdP+vjBGv5u9+GbVxQ6Eenyts89uSqEZs1F
 ltoBrl4VotXyqHKneJ0ttUKEimcVIgu8rCXH0sTtCg0SZVJFi+UXzI/VkkS+expL
 x9bNN6bw5UT9LA8+qybFRETx+8qchFsffzeUEle4wkIpVKXt/VqjP3GIvp6umlF5
 RhU5Wumf2KuIVjgVsYxd7bUkmHr4ywpqS3vSWMWU90FApJay7exatzLPyUVN0AxH
 pdAizc8NWFk1kVtWq8jr9agEdxDt2l+E9UXij+ViGyouMZL1oSvOo9NgovfwvfC6
 qKUisUkq53p1uPOW/U5gvF7bee2enEXMI9YUY1Z8MHx7nloq+25Nqma8P0gYthB8
 6Qk+t1oqC2p7ZMSkyVHH9nySQmoLITZHZmsHqqpLW+jFtanhuckDI75AvmrScs+r
 3+2YZXxPI0caZZ1qxMCd7Clmh7ZcSeRe73HXSXmF0xrLffISM3Yg3ZN10cbWQRj2
 D6TiHCspLpn+pcYLcWJ2
 =D78E
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "It was a busy development cycle at this time, as you can see a wide
  range of changes in diffstat.  There are no big changes but many
  refactoring and improvements.  Here we go some highlights:

  ALSA core:
   - Procfs codes were cleaned up to use seq_file
   - Procfs can be opt out via Kconfig (only for EXPERT)
   - Two types of jack API were unified finally; now both kctl and input
     jack devs are handled via a single function call.

  HD-audio:
   - Continued code restructuring for the future ASoC driver; now HDA
     controller driver is split to a core helper module.
   - Preliminary codes for Skylake audio support in HDA core.
   - Proper i915 gfx power well management for SKL & co
   - Enabled runtime PM as default for Intel HDMI/DP codecs
   - Newer Tegra chip supports
   - More quirks for Dell headsets, Alienware (with CA0132), etc.
   - A couple of DRM ELD helper API functions

  ASoC:
   - Support for loading ASoC topology maps from firmware, intended to
     be used to allow self-describing DSP firmware images to be built
     which can map controls added by the DSP to userspace without the
     kernel needing to know about individual DSP firmwares
   - Lots of refactoring to avoid direct access to snd_soc_codec where
     it's not needed supporting future refactoring
   - Big refactoring, cleanup and enhancement for the Wolfson ADSP
     driver
   - Cleanup series for TI TAS2552 and R-CAR drivers
   - Fixes and improvements on RT56xx codecs
   - Support for TI TAS571x power amplifiers
   - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs
   - Support for x86 systems with RT5650 and Qualcomm Storm
   - Support for Mediatek AFE (Audio Front End) unit
   - Other various small fixes to ASoC codec drivers

  Firewire:
   - Enhanced to allow non-blocking streams to use timestamp
     synchronization
   - Improve support for DM1500 and BeBoBv3

  Misc:
   - Cleanup of old pci API functions over all PCI sound drivers
   - Fix long-standing regression of the old powermac i2c setup"

* tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (533 commits)
  ALSA: pcm: Fix pcm_class sysfs output
  ALSA: hda-beep: Update authors dead email address
  ASoC: wm_adsp: Move DSP Rate controls into the codec
  ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 case
  ALSA: hda: provide default bus io ops extended hdac
  ALSA: hda: add hda link cleanup routine
  ALSA: hda: add hdac_ext stream creation and cleanup routines
  ASoC: rsrc-card: remove unused ret
  ALSA: HDAC: move SND_HDA_PREALLOC_SIZE to core
  ASoC: mediatek: Add machine driver for rt5650 rt5676 codec
  ASoC: mediatek: Add machine driver for MAX98090 codec
  ASoC: mediatek: Add AFE platform driver
  ASoC: rsnd: remove io from rsnd_mod
  ASoC: rsnd: move rsnd_mod_is_working() to rsnd_io_is_working()
  ASoC: rsnd: don't use rsnd_mod_to_io() on snd_kcontrol
  ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_src_xxx()
  ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_ssi_xxx()
  ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_dma_xxx()
  ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_get_adinr()
  ASoC: rsnd: add common interrupt handler for SSI/SRC/DMA
  ...
2015-06-25 17:15:18 -07:00

324 lines
7.8 KiB
C

/*
* arizona-ldo1.c -- LDO1 supply for Arizona devices
*
* Copyright 2012 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/mfd/arizona/core.h>
#include <linux/mfd/arizona/pdata.h>
#include <linux/mfd/arizona/registers.h>
struct arizona_ldo1 {
struct regulator_dev *regulator;
struct arizona *arizona;
struct regulator_consumer_supply supply;
struct regulator_init_data init_data;
};
static int arizona_ldo1_hc_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
if (selector >= rdev->desc->n_voltages)
return -EINVAL;
if (selector == rdev->desc->n_voltages - 1)
return 1800000;
else
return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
}
static int arizona_ldo1_hc_map_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV)
{
int sel;
sel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
if (sel >= rdev->desc->n_voltages)
sel = rdev->desc->n_voltages - 1;
return sel;
}
static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
struct regmap *regmap = ldo->arizona->regmap;
unsigned int val;
int ret;
if (sel == rdev->desc->n_voltages - 1)
val = ARIZONA_LDO1_HI_PWR;
else
val = 0;
ret = regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_2,
ARIZONA_LDO1_HI_PWR, val);
if (ret != 0)
return ret;
if (val)
return 0;
val = sel << ARIZONA_LDO1_VSEL_SHIFT;
return regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_1,
ARIZONA_LDO1_VSEL_MASK, val);
}
static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
{
struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
struct regmap *regmap = ldo->arizona->regmap;
unsigned int val;
int ret;
ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_2, &val);
if (ret != 0)
return ret;
if (val & ARIZONA_LDO1_HI_PWR)
return rdev->desc->n_voltages - 1;
ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_1, &val);
if (ret != 0)
return ret;
return (val & ARIZONA_LDO1_VSEL_MASK) >> ARIZONA_LDO1_VSEL_SHIFT;
}
static struct regulator_ops arizona_ldo1_hc_ops = {
.list_voltage = arizona_ldo1_hc_list_voltage,
.map_voltage = arizona_ldo1_hc_map_voltage,
.get_voltage_sel = arizona_ldo1_hc_get_voltage_sel,
.set_voltage_sel = arizona_ldo1_hc_set_voltage_sel,
.get_bypass = regulator_get_bypass_regmap,
.set_bypass = regulator_set_bypass_regmap,
};
static const struct regulator_desc arizona_ldo1_hc = {
.name = "LDO1",
.supply_name = "LDOVDD",
.type = REGULATOR_VOLTAGE,
.ops = &arizona_ldo1_hc_ops,
.bypass_reg = ARIZONA_LDO1_CONTROL_1,
.bypass_mask = ARIZONA_LDO1_BYPASS,
.min_uV = 900000,
.uV_step = 50000,
.n_voltages = 8,
.enable_time = 1500,
.owner = THIS_MODULE,
};
static struct regulator_ops arizona_ldo1_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
};
static const struct regulator_desc arizona_ldo1 = {
.name = "LDO1",
.supply_name = "LDOVDD",
.type = REGULATOR_VOLTAGE,
.ops = &arizona_ldo1_ops,
.vsel_reg = ARIZONA_LDO1_CONTROL_1,
.vsel_mask = ARIZONA_LDO1_VSEL_MASK,
.min_uV = 900000,
.uV_step = 25000,
.n_voltages = 13,
.enable_time = 500,
.owner = THIS_MODULE,
};
static const struct regulator_init_data arizona_ldo1_dvfs = {
.constraints = {
.min_uV = 1200000,
.max_uV = 1800000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS |
REGULATOR_CHANGE_VOLTAGE,
},
.num_consumer_supplies = 1,
};
static const struct regulator_init_data arizona_ldo1_default = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
};
static const struct regulator_init_data arizona_ldo1_wm5110 = {
.constraints = {
.min_uV = 1175000,
.max_uV = 1200000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS |
REGULATOR_CHANGE_VOLTAGE,
},
.num_consumer_supplies = 1,
};
static int arizona_ldo1_of_get_pdata(struct arizona *arizona,
struct regulator_config *config,
const struct regulator_desc *desc)
{
struct arizona_pdata *pdata = &arizona->pdata;
struct arizona_ldo1 *ldo1 = config->driver_data;
struct device_node *init_node, *dcvdd_node;
struct regulator_init_data *init_data;
pdata->ldoena = arizona_of_get_named_gpio(arizona, "wlf,ldoena", true);
init_node = of_get_child_by_name(arizona->dev->of_node, "ldo1");
dcvdd_node = of_parse_phandle(arizona->dev->of_node, "DCVDD-supply", 0);
if (init_node) {
config->of_node = init_node;
init_data = of_get_regulator_init_data(arizona->dev, init_node,
desc);
if (init_data) {
init_data->consumer_supplies = &ldo1->supply;
init_data->num_consumer_supplies = 1;
if (dcvdd_node && dcvdd_node != init_node)
arizona->external_dcvdd = true;
pdata->ldo1 = init_data;
}
} else if (dcvdd_node) {
arizona->external_dcvdd = true;
}
of_node_put(dcvdd_node);
return 0;
}
static int arizona_ldo1_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
const struct regulator_desc *desc;
struct regulator_config config = { };
struct arizona_ldo1 *ldo1;
int ret;
arizona->external_dcvdd = false;
ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL);
if (!ldo1)
return -ENOMEM;
ldo1->arizona = arizona;
/*
* Since the chip usually supplies itself we provide some
* default init_data for it. This will be overridden with
* platform data if provided.
*/
switch (arizona->type) {
case WM5102:
case WM8997:
desc = &arizona_ldo1_hc;
ldo1->init_data = arizona_ldo1_dvfs;
break;
case WM5110:
case WM8280:
desc = &arizona_ldo1;
ldo1->init_data = arizona_ldo1_wm5110;
break;
default:
desc = &arizona_ldo1;
ldo1->init_data = arizona_ldo1_default;
break;
}
ldo1->init_data.consumer_supplies = &ldo1->supply;
ldo1->supply.supply = "DCVDD";
ldo1->supply.dev_name = dev_name(arizona->dev);
config.dev = arizona->dev;
config.driver_data = ldo1;
config.regmap = arizona->regmap;
if (IS_ENABLED(CONFIG_OF)) {
if (!dev_get_platdata(arizona->dev)) {
ret = arizona_ldo1_of_get_pdata(arizona, &config, desc);
if (ret < 0)
return ret;
config.ena_gpio_initialized = true;
}
}
config.ena_gpio = arizona->pdata.ldoena;
if (arizona->pdata.ldo1)
config.init_data = arizona->pdata.ldo1;
else
config.init_data = &ldo1->init_data;
/*
* LDO1 can only be used to supply DCVDD so if it has no
* consumers then DCVDD is supplied externally.
*/
if (config.init_data->num_consumer_supplies == 0)
arizona->external_dcvdd = true;
ldo1->regulator = devm_regulator_register(&pdev->dev, desc, &config);
of_node_put(config.of_node);
if (IS_ERR(ldo1->regulator)) {
ret = PTR_ERR(ldo1->regulator);
dev_err(arizona->dev, "Failed to register LDO1 supply: %d\n",
ret);
return ret;
}
platform_set_drvdata(pdev, ldo1);
return 0;
}
static struct platform_driver arizona_ldo1_driver = {
.probe = arizona_ldo1_probe,
.driver = {
.name = "arizona-ldo1",
},
};
module_platform_driver(arizona_ldo1_driver);
/* Module information */
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("Arizona LDO1 driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:arizona-ldo1");