linux_dsm_epyc7002/drivers/iio/proximity/srf04.c
Andreas Klinger 2251157b33 iio: srf04: add power management feature
Add suspend and resume operations for being used by optional power
management.

The suspend function is switching off an GPIO which can be used by the
hardware to switch power off. The resume function is switching the GPIO
on and sleeps an adjustable time to give the device a chance to be up
and running.

If activated the driver gets into autosuspend after some time of
inactivity.

Suggested-by: Franz Parzer <rpi-receiver@htl-steyr.ac.at>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14 12:08:23 +00:00

410 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* SRF04: ultrasonic sensor for distance measuring by using GPIOs
*
* Copyright (c) 2017 Andreas Klinger <ak@it-klinger.de>
*
* For details about the device see:
* http://www.robot-electronics.co.uk/htm/srf04tech.htm
*
* the measurement cycle as timing diagram looks like:
*
* +---+
* GPIO | |
* trig: --+ +------------------------------------------------------
* ^ ^
* |<->|
* udelay(trigger_pulse_us)
*
* ultra +-+ +-+ +-+
* sonic | | | | | |
* burst: ---------+ +-+ +-+ +-----------------------------------------
* .
* ultra . +-+ +-+ +-+
* sonic . | | | | | |
* echo: ----------------------------------+ +-+ +-+ +----------------
* . .
* +------------------------+
* GPIO | |
* echo: -------------------+ +---------------
* ^ ^
* interrupt interrupt
* (ts_rising) (ts_falling)
* |<---------------------->|
* pulse time measured
* --> one round trip of ultra sonic waves
*/
#include <linux/err.h>
#include <linux/gpio/consumer.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/pm_runtime.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
struct srf04_cfg {
unsigned long trigger_pulse_us;
};
struct srf04_data {
struct device *dev;
struct gpio_desc *gpiod_trig;
struct gpio_desc *gpiod_echo;
struct gpio_desc *gpiod_power;
struct mutex lock;
int irqnr;
ktime_t ts_rising;
ktime_t ts_falling;
struct completion rising;
struct completion falling;
const struct srf04_cfg *cfg;
int startup_time_ms;
};
static const struct srf04_cfg srf04_cfg = {
.trigger_pulse_us = 10,
};
static const struct srf04_cfg mb_lv_cfg = {
.trigger_pulse_us = 20,
};
static irqreturn_t srf04_handle_irq(int irq, void *dev_id)
{
struct iio_dev *indio_dev = dev_id;
struct srf04_data *data = iio_priv(indio_dev);
ktime_t now = ktime_get();
if (gpiod_get_value(data->gpiod_echo)) {
data->ts_rising = now;
complete(&data->rising);
} else {
data->ts_falling = now;
complete(&data->falling);
}
return IRQ_HANDLED;
}
static int srf04_read(struct srf04_data *data)
{
int ret;
ktime_t ktime_dt;
u64 dt_ns;
u32 time_ns, distance_mm;
if (data->gpiod_power)
pm_runtime_get_sync(data->dev);
/*
* just one read-echo-cycle can take place at a time
* ==> lock against concurrent reading calls
*/
mutex_lock(&data->lock);
reinit_completion(&data->rising);
reinit_completion(&data->falling);
gpiod_set_value(data->gpiod_trig, 1);
udelay(data->cfg->trigger_pulse_us);
gpiod_set_value(data->gpiod_trig, 0);
if (data->gpiod_power) {
pm_runtime_mark_last_busy(data->dev);
pm_runtime_put_autosuspend(data->dev);
}
/* it should not take more than 20 ms until echo is rising */
ret = wait_for_completion_killable_timeout(&data->rising, HZ/50);
if (ret < 0) {
mutex_unlock(&data->lock);
return ret;
} else if (ret == 0) {
mutex_unlock(&data->lock);
return -ETIMEDOUT;
}
/* it cannot take more than 50 ms until echo is falling */
ret = wait_for_completion_killable_timeout(&data->falling, HZ/20);
if (ret < 0) {
mutex_unlock(&data->lock);
return ret;
} else if (ret == 0) {
mutex_unlock(&data->lock);
return -ETIMEDOUT;
}
ktime_dt = ktime_sub(data->ts_falling, data->ts_rising);
mutex_unlock(&data->lock);
dt_ns = ktime_to_ns(ktime_dt);
/*
* measuring more than 6,45 meters is beyond the capabilities of
* the supported sensors
* ==> filter out invalid results for not measuring echos of
* another us sensor
*
* formula:
* distance 6,45 * 2 m
* time = ---------- = ------------ = 40438871 ns
* speed 319 m/s
*
* using a minimum speed at -20 °C of 319 m/s
*/
if (dt_ns > 40438871)
return -EIO;
time_ns = dt_ns;
/*
* the speed as function of the temperature is approximately:
*
* speed = 331,5 + 0,6 * Temp
* with Temp in °C
* and speed in m/s
*
* use 343,5 m/s as ultrasonic speed at 20 °C here in absence of the
* temperature
*
* therefore:
* time 343,5 time * 106
* distance = ------ * ------- = ------------
* 10^6 2 617176
* with time in ns
* and distance in mm (one way)
*
* because we limit to 6,45 meters the multiplication with 106 just
* fits into 32 bit
*/
distance_mm = time_ns * 106 / 617176;
return distance_mm;
}
static int srf04_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *channel, int *val,
int *val2, long info)
{
struct srf04_data *data = iio_priv(indio_dev);
int ret;
if (channel->type != IIO_DISTANCE)
return -EINVAL;
switch (info) {
case IIO_CHAN_INFO_RAW:
ret = srf04_read(data);
if (ret < 0)
return ret;
*val = ret;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
/*
* theoretical maximum resolution is 3 mm
* 1 LSB is 1 mm
*/
*val = 0;
*val2 = 1000;
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
}
static const struct iio_info srf04_iio_info = {
.read_raw = srf04_read_raw,
};
static const struct iio_chan_spec srf04_chan_spec[] = {
{
.type = IIO_DISTANCE,
.info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE),
},
};
static const struct of_device_id of_srf04_match[] = {
{ .compatible = "devantech,srf04", .data = &srf04_cfg},
{ .compatible = "maxbotix,mb1000", .data = &mb_lv_cfg},
{ .compatible = "maxbotix,mb1010", .data = &mb_lv_cfg},
{ .compatible = "maxbotix,mb1020", .data = &mb_lv_cfg},
{ .compatible = "maxbotix,mb1030", .data = &mb_lv_cfg},
{ .compatible = "maxbotix,mb1040", .data = &mb_lv_cfg},
{},
};
MODULE_DEVICE_TABLE(of, of_srf04_match);
static int srf04_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct srf04_data *data;
struct iio_dev *indio_dev;
int ret;
indio_dev = devm_iio_device_alloc(dev, sizeof(struct srf04_data));
if (!indio_dev) {
dev_err(dev, "failed to allocate IIO device\n");
return -ENOMEM;
}
data = iio_priv(indio_dev);
data->dev = dev;
data->cfg = of_match_device(of_srf04_match, dev)->data;
mutex_init(&data->lock);
init_completion(&data->rising);
init_completion(&data->falling);
data->gpiod_trig = devm_gpiod_get(dev, "trig", GPIOD_OUT_LOW);
if (IS_ERR(data->gpiod_trig)) {
dev_err(dev, "failed to get trig-gpios: err=%ld\n",
PTR_ERR(data->gpiod_trig));
return PTR_ERR(data->gpiod_trig);
}
data->gpiod_echo = devm_gpiod_get(dev, "echo", GPIOD_IN);
if (IS_ERR(data->gpiod_echo)) {
dev_err(dev, "failed to get echo-gpios: err=%ld\n",
PTR_ERR(data->gpiod_echo));
return PTR_ERR(data->gpiod_echo);
}
data->gpiod_power = devm_gpiod_get_optional(dev, "power",
GPIOD_OUT_LOW);
if (IS_ERR(data->gpiod_power)) {
dev_err(dev, "failed to get power-gpios: err=%ld\n",
PTR_ERR(data->gpiod_power));
return PTR_ERR(data->gpiod_power);
}
if (data->gpiod_power) {
if (of_property_read_u32(dev->of_node, "startup-time-ms",
&data->startup_time_ms))
data->startup_time_ms = 100;
dev_dbg(dev, "using power gpio: startup-time-ms=%d\n",
data->startup_time_ms);
}
if (gpiod_cansleep(data->gpiod_echo)) {
dev_err(data->dev, "cansleep-GPIOs not supported\n");
return -ENODEV;
}
data->irqnr = gpiod_to_irq(data->gpiod_echo);
if (data->irqnr < 0) {
dev_err(data->dev, "gpiod_to_irq: %d\n", data->irqnr);
return data->irqnr;
}
ret = devm_request_irq(dev, data->irqnr, srf04_handle_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
pdev->name, indio_dev);
if (ret < 0) {
dev_err(data->dev, "request_irq: %d\n", ret);
return ret;
}
platform_set_drvdata(pdev, indio_dev);
indio_dev->name = "srf04";
indio_dev->dev.parent = &pdev->dev;
indio_dev->info = &srf04_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = srf04_chan_spec;
indio_dev->num_channels = ARRAY_SIZE(srf04_chan_spec);
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(data->dev, "iio_device_register: %d\n", ret);
return ret;
}
if (data->gpiod_power) {
pm_runtime_set_autosuspend_delay(data->dev, 1000);
pm_runtime_use_autosuspend(data->dev);
ret = pm_runtime_set_active(data->dev);
if (ret) {
dev_err(data->dev, "pm_runtime_set_active: %d\n", ret);
iio_device_unregister(indio_dev);
}
pm_runtime_enable(data->dev);
pm_runtime_idle(data->dev);
}
return ret;
}
static int srf04_remove(struct platform_device *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct srf04_data *data = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
if (data->gpiod_power) {
pm_runtime_disable(data->dev);
pm_runtime_set_suspended(data->dev);
}
return 0;
}
static int __maybe_unused srf04_pm_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = container_of(dev,
struct platform_device, dev);
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct srf04_data *data = iio_priv(indio_dev);
gpiod_set_value(data->gpiod_power, 0);
return 0;
}
static int __maybe_unused srf04_pm_runtime_resume(struct device *dev)
{
struct platform_device *pdev = container_of(dev,
struct platform_device, dev);
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct srf04_data *data = iio_priv(indio_dev);
gpiod_set_value(data->gpiod_power, 1);
msleep(data->startup_time_ms);
return 0;
}
static const struct dev_pm_ops srf04_pm_ops = {
SET_RUNTIME_PM_OPS(srf04_pm_runtime_suspend,
srf04_pm_runtime_resume, NULL)
};
static struct platform_driver srf04_driver = {
.probe = srf04_probe,
.remove = srf04_remove,
.driver = {
.name = "srf04-gpio",
.of_match_table = of_srf04_match,
.pm = &srf04_pm_ops,
},
};
module_platform_driver(srf04_driver);
MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
MODULE_DESCRIPTION("SRF04 ultrasonic sensor for distance measuring using GPIOs");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:srf04");