linux_dsm_epyc7002/arch/powerpc/mm/init_64.c
Bharata B Rao 029ab30b4c powerpc/mm: Enable radix GTSE only if supported.
Make GTSE an MMU feature and enable it by default for radix.
However for guest, conditionally enable it if hypervisor supports
it via OV5 vector. Let prom_init ask for radix GTSE only if the
support exists.

Having GTSE as an MMU feature will make it easy to enable radix
without GTSE. Currently radix assumes GTSE is enabled by default.

Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703053608.12884-2-bharata@linux.ibm.com
2020-07-16 13:00:21 +10:00

443 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
* and Cort Dougan (PReP) (cort@cs.nmt.edu)
* Copyright (C) 1996 Paul Mackerras
*
* Derived from "arch/i386/mm/init.c"
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*
* Dave Engebretsen <engebret@us.ibm.com>
* Rework for PPC64 port.
*/
#undef DEBUG
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/stddef.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/highmem.h>
#include <linux/idr.h>
#include <linux/nodemask.h>
#include <linux/module.h>
#include <linux/poison.h>
#include <linux/memblock.h>
#include <linux/hugetlb.h>
#include <linux/slab.h>
#include <linux/of_fdt.h>
#include <linux/libfdt.h>
#include <linux/memremap.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/io.h>
#include <asm/mmu_context.h>
#include <asm/mmu.h>
#include <linux/uaccess.h>
#include <asm/smp.h>
#include <asm/machdep.h>
#include <asm/tlb.h>
#include <asm/eeh.h>
#include <asm/processor.h>
#include <asm/mmzone.h>
#include <asm/cputable.h>
#include <asm/sections.h>
#include <asm/iommu.h>
#include <asm/vdso.h>
#include <mm/mmu_decl.h>
#ifdef CONFIG_SPARSEMEM_VMEMMAP
/*
* Given an address within the vmemmap, determine the page that
* represents the start of the subsection it is within. Note that we have to
* do this by hand as the proffered address may not be correctly aligned.
* Subtraction of non-aligned pointers produces undefined results.
*/
static struct page * __meminit vmemmap_subsection_start(unsigned long vmemmap_addr)
{
unsigned long start_pfn;
unsigned long offset = vmemmap_addr - ((unsigned long)(vmemmap));
/* Return the pfn of the start of the section. */
start_pfn = (offset / sizeof(struct page)) & PAGE_SUBSECTION_MASK;
return pfn_to_page(start_pfn);
}
/*
* Since memory is added in sub-section chunks, before creating a new vmemmap
* mapping, the kernel should check whether there is an existing memmap mapping
* covering the new subsection added. This is needed because kernel can map
* vmemmap area using 16MB pages which will cover a memory range of 16G. Such
* a range covers multiple subsections (2M)
*
* If any subsection in the 16G range mapped by vmemmap is valid we consider the
* vmemmap populated (There is a page table entry already present). We can't do
* a page table lookup here because with the hash translation we don't keep
* vmemmap details in linux page table.
*/
static int __meminit vmemmap_populated(unsigned long vmemmap_addr, int vmemmap_map_size)
{
struct page *start;
unsigned long vmemmap_end = vmemmap_addr + vmemmap_map_size;
start = vmemmap_subsection_start(vmemmap_addr);
for (; (unsigned long)start < vmemmap_end; start += PAGES_PER_SUBSECTION)
/*
* pfn valid check here is intended to really check
* whether we have any subsection already initialized
* in this range.
*/
if (pfn_valid(page_to_pfn(start)))
return 1;
return 0;
}
/*
* vmemmap virtual address space management does not have a traditonal page
* table to track which virtual struct pages are backed by physical mapping.
* The virtual to physical mappings are tracked in a simple linked list
* format. 'vmemmap_list' maintains the entire vmemmap physical mapping at
* all times where as the 'next' list maintains the available
* vmemmap_backing structures which have been deleted from the
* 'vmemmap_global' list during system runtime (memory hotplug remove
* operation). The freed 'vmemmap_backing' structures are reused later when
* new requests come in without allocating fresh memory. This pointer also
* tracks the allocated 'vmemmap_backing' structures as we allocate one
* full page memory at a time when we dont have any.
*/
struct vmemmap_backing *vmemmap_list;
static struct vmemmap_backing *next;
/*
* The same pointer 'next' tracks individual chunks inside the allocated
* full page during the boot time and again tracks the freeed nodes during
* runtime. It is racy but it does not happen as they are separated by the
* boot process. Will create problem if some how we have memory hotplug
* operation during boot !!
*/
static int num_left;
static int num_freed;
static __meminit struct vmemmap_backing * vmemmap_list_alloc(int node)
{
struct vmemmap_backing *vmem_back;
/* get from freed entries first */
if (num_freed) {
num_freed--;
vmem_back = next;
next = next->list;
return vmem_back;
}
/* allocate a page when required and hand out chunks */
if (!num_left) {
next = vmemmap_alloc_block(PAGE_SIZE, node);
if (unlikely(!next)) {
WARN_ON(1);
return NULL;
}
num_left = PAGE_SIZE / sizeof(struct vmemmap_backing);
}
num_left--;
return next++;
}
static __meminit void vmemmap_list_populate(unsigned long phys,
unsigned long start,
int node)
{
struct vmemmap_backing *vmem_back;
vmem_back = vmemmap_list_alloc(node);
if (unlikely(!vmem_back)) {
WARN_ON(1);
return;
}
vmem_back->phys = phys;
vmem_back->virt_addr = start;
vmem_back->list = vmemmap_list;
vmemmap_list = vmem_back;
}
static bool altmap_cross_boundary(struct vmem_altmap *altmap, unsigned long start,
unsigned long page_size)
{
unsigned long nr_pfn = page_size / sizeof(struct page);
unsigned long start_pfn = page_to_pfn((struct page *)start);
if ((start_pfn + nr_pfn) > altmap->end_pfn)
return true;
if (start_pfn < altmap->base_pfn)
return true;
return false;
}
int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
struct vmem_altmap *altmap)
{
unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
/* Align to the page size of the linear mapping. */
start = ALIGN_DOWN(start, page_size);
pr_debug("vmemmap_populate %lx..%lx, node %d\n", start, end, node);
for (; start < end; start += page_size) {
void *p = NULL;
int rc;
/*
* This vmemmap range is backing different subsections. If any
* of that subsection is marked valid, that means we already
* have initialized a page table covering this range and hence
* the vmemmap range is populated.
*/
if (vmemmap_populated(start, page_size))
continue;
/*
* Allocate from the altmap first if we have one. This may
* fail due to alignment issues when using 16MB hugepages, so
* fall back to system memory if the altmap allocation fail.
*/
if (altmap && !altmap_cross_boundary(altmap, start, page_size)) {
p = altmap_alloc_block_buf(page_size, altmap);
if (!p)
pr_debug("altmap block allocation failed, falling back to system memory");
}
if (!p)
p = vmemmap_alloc_block_buf(page_size, node);
if (!p)
return -ENOMEM;
vmemmap_list_populate(__pa(p), start, node);
pr_debug(" * %016lx..%016lx allocated at %p\n",
start, start + page_size, p);
rc = vmemmap_create_mapping(start, page_size, __pa(p));
if (rc < 0) {
pr_warn("%s: Unable to create vmemmap mapping: %d\n",
__func__, rc);
return -EFAULT;
}
}
return 0;
}
#ifdef CONFIG_MEMORY_HOTPLUG
static unsigned long vmemmap_list_free(unsigned long start)
{
struct vmemmap_backing *vmem_back, *vmem_back_prev;
vmem_back_prev = vmem_back = vmemmap_list;
/* look for it with prev pointer recorded */
for (; vmem_back; vmem_back = vmem_back->list) {
if (vmem_back->virt_addr == start)
break;
vmem_back_prev = vmem_back;
}
if (unlikely(!vmem_back)) {
WARN_ON(1);
return 0;
}
/* remove it from vmemmap_list */
if (vmem_back == vmemmap_list) /* remove head */
vmemmap_list = vmem_back->list;
else
vmem_back_prev->list = vmem_back->list;
/* next point to this freed entry */
vmem_back->list = next;
next = vmem_back;
num_freed++;
return vmem_back->phys;
}
void __ref vmemmap_free(unsigned long start, unsigned long end,
struct vmem_altmap *altmap)
{
unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
unsigned long page_order = get_order(page_size);
unsigned long alt_start = ~0, alt_end = ~0;
unsigned long base_pfn;
start = ALIGN_DOWN(start, page_size);
if (altmap) {
alt_start = altmap->base_pfn;
alt_end = altmap->base_pfn + altmap->reserve +
altmap->free + altmap->alloc + altmap->align;
}
pr_debug("vmemmap_free %lx...%lx\n", start, end);
for (; start < end; start += page_size) {
unsigned long nr_pages, addr;
struct page *page;
/*
* We have already marked the subsection we are trying to remove
* invalid. So if we want to remove the vmemmap range, we
* need to make sure there is no subsection marked valid
* in this range.
*/
if (vmemmap_populated(start, page_size))
continue;
addr = vmemmap_list_free(start);
if (!addr)
continue;
page = pfn_to_page(addr >> PAGE_SHIFT);
nr_pages = 1 << page_order;
base_pfn = PHYS_PFN(addr);
if (base_pfn >= alt_start && base_pfn < alt_end) {
vmem_altmap_free(altmap, nr_pages);
} else if (PageReserved(page)) {
/* allocated from bootmem */
if (page_size < PAGE_SIZE) {
/*
* this shouldn't happen, but if it is
* the case, leave the memory there
*/
WARN_ON_ONCE(1);
} else {
while (nr_pages--)
free_reserved_page(page++);
}
} else {
free_pages((unsigned long)(__va(addr)), page_order);
}
vmemmap_remove_mapping(start, page_size);
}
}
#endif
void register_page_bootmem_memmap(unsigned long section_nr,
struct page *start_page, unsigned long size)
{
}
#endif /* CONFIG_SPARSEMEM_VMEMMAP */
#ifdef CONFIG_PPC_BOOK3S_64
static bool disable_radix = !IS_ENABLED(CONFIG_PPC_RADIX_MMU_DEFAULT);
static int __init parse_disable_radix(char *p)
{
bool val;
if (!p)
val = true;
else if (kstrtobool(p, &val))
return -EINVAL;
disable_radix = val;
return 0;
}
early_param("disable_radix", parse_disable_radix);
/*
* If we're running under a hypervisor, we need to check the contents of
* /chosen/ibm,architecture-vec-5 to see if the hypervisor is willing to do
* radix. If not, we clear the radix feature bit so we fall back to hash.
*/
static void __init early_check_vec5(void)
{
unsigned long root, chosen;
int size;
const u8 *vec5;
u8 mmu_supported;
root = of_get_flat_dt_root();
chosen = of_get_flat_dt_subnode_by_name(root, "chosen");
if (chosen == -FDT_ERR_NOTFOUND) {
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
return;
}
vec5 = of_get_flat_dt_prop(chosen, "ibm,architecture-vec-5", &size);
if (!vec5) {
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
return;
}
if (size <= OV5_INDX(OV5_MMU_SUPPORT)) {
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
return;
}
/* Check for supported configuration */
mmu_supported = vec5[OV5_INDX(OV5_MMU_SUPPORT)] &
OV5_FEAT(OV5_MMU_SUPPORT);
if (mmu_supported == OV5_FEAT(OV5_MMU_RADIX)) {
/* Hypervisor only supports radix - check enabled && GTSE */
if (!early_radix_enabled()) {
pr_warn("WARNING: Ignoring cmdline option disable_radix\n");
}
if (!(vec5[OV5_INDX(OV5_RADIX_GTSE)] &
OV5_FEAT(OV5_RADIX_GTSE))) {
pr_warn("WARNING: Hypervisor doesn't support RADIX with GTSE\n");
cur_cpu_spec->mmu_features &= ~MMU_FTR_GTSE;
} else
cur_cpu_spec->mmu_features |= MMU_FTR_GTSE;
/* Do radix anyway - the hypervisor said we had to */
cur_cpu_spec->mmu_features |= MMU_FTR_TYPE_RADIX;
} else if (mmu_supported == OV5_FEAT(OV5_MMU_HASH)) {
/* Hypervisor only supports hash - disable radix */
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
cur_cpu_spec->mmu_features &= ~MMU_FTR_GTSE;
}
}
void __init mmu_early_init_devtree(void)
{
/* Disable radix mode based on kernel command line. */
if (disable_radix)
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
/*
* Check /chosen/ibm,architecture-vec-5 if running as a guest.
* When running bare-metal, we can use radix if we like
* even though the ibm,architecture-vec-5 property created by
* skiboot doesn't have the necessary bits set.
*/
if (!(mfmsr() & MSR_HV))
early_check_vec5();
if (early_radix_enabled())
radix__early_init_devtree();
else
hash__early_init_devtree();
}
#endif /* CONFIG_PPC_BOOK3S_64 */