mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 01:16:43 +07:00
6de714c21a
Make sure the RTC-interrupts are masked at boot by adding a new helper function to be used at SOC-init. This fixes hanged boot on all AT91 SOCs with an RTC (but RM9200), for example, after a reset during an RTC-update or if an RTC-alarm goes off after shutdown (e.g. when using RTC wakeup). The RTC and RTT-peripherals are powered by backup power (VDDBU) (on all AT91 SOCs but RM9200) and are not reset on wake-up, user, watchdog or software reset. This means that their interrupts may be enabled during early boot if, for example, they where not disabled during a previous shutdown (e.g. due to a buggy driver or a non-clean shutdown such as a user reset). Furthermore, an RTC or RTT-alarm may also be active. The RTC and RTT-interrupts use the shared system-interrupt line, which is also used by the PIT, and if an interrupt occurs before a handler (e.g. RTC-driver) has been installed this leads to the system interrupt being disabled and prevents the system from booting. Note that when boot hangs due to an early RTC or RTT-interrupt, the only way to get the system to start again is to remove the backup power (e.g. battery) or to disable the interrupt manually from the bootloader. In particular, a user reset is not sufficient. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable@vger.kernel.org # 3.11.x
87 lines
3.2 KiB
C
87 lines
3.2 KiB
C
/*
|
|
* Chip-specific header file for the SAMA5D3 family
|
|
*
|
|
* Copyright (C) 2013 Atmel,
|
|
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
|
|
*
|
|
* Common definitions.
|
|
* Based on SAMA5D3 datasheet.
|
|
*
|
|
* Licensed under GPLv2 or later.
|
|
*/
|
|
|
|
#ifndef SAMA5D3_H
|
|
#define SAMA5D3_H
|
|
|
|
/*
|
|
* Peripheral identifiers/interrupts.
|
|
*/
|
|
#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
|
|
#define AT91_ID_SYS 1 /* System Peripherals */
|
|
#define SAMA5D3_ID_DBGU 2 /* debug Unit (usually no special interrupt line) */
|
|
#define AT91_ID_PIT 3 /* PIT */
|
|
#define SAMA5D3_ID_WDT 4 /* Watchdog Timer Interrupt */
|
|
#define SAMA5D3_ID_HSMC 5 /* Static Memory Controller */
|
|
#define SAMA5D3_ID_PIOA 6 /* PIOA */
|
|
#define SAMA5D3_ID_PIOB 7 /* PIOB */
|
|
#define SAMA5D3_ID_PIOC 8 /* PIOC */
|
|
#define SAMA5D3_ID_PIOD 9 /* PIOD */
|
|
#define SAMA5D3_ID_PIOE 10 /* PIOE */
|
|
#define SAMA5D3_ID_SMD 11 /* SMD Soft Modem */
|
|
#define SAMA5D3_ID_USART0 12 /* USART0 */
|
|
#define SAMA5D3_ID_USART1 13 /* USART1 */
|
|
#define SAMA5D3_ID_USART2 14 /* USART2 */
|
|
#define SAMA5D3_ID_USART3 15 /* USART3 */
|
|
#define SAMA5D3_ID_UART0 16 /* UART 0 */
|
|
#define SAMA5D3_ID_UART1 17 /* UART 1 */
|
|
#define SAMA5D3_ID_TWI0 18 /* Two-Wire Interface 0 */
|
|
#define SAMA5D3_ID_TWI1 19 /* Two-Wire Interface 1 */
|
|
#define SAMA5D3_ID_TWI2 20 /* Two-Wire Interface 2 */
|
|
#define SAMA5D3_ID_HSMCI0 21 /* MCI */
|
|
#define SAMA5D3_ID_HSMCI1 22 /* MCI */
|
|
#define SAMA5D3_ID_HSMCI2 23 /* MCI */
|
|
#define SAMA5D3_ID_SPI0 24 /* Serial Peripheral Interface 0 */
|
|
#define SAMA5D3_ID_SPI1 25 /* Serial Peripheral Interface 1 */
|
|
#define SAMA5D3_ID_TC0 26 /* Timer Counter 0 */
|
|
#define SAMA5D3_ID_TC1 27 /* Timer Counter 2 */
|
|
#define SAMA5D3_ID_PWM 28 /* Pulse Width Modulation Controller */
|
|
#define SAMA5D3_ID_ADC 29 /* Touch Screen ADC Controller */
|
|
#define SAMA5D3_ID_DMA0 30 /* DMA Controller 0 */
|
|
#define SAMA5D3_ID_DMA1 31 /* DMA Controller 1 */
|
|
#define SAMA5D3_ID_UHPHS 32 /* USB Host High Speed */
|
|
#define SAMA5D3_ID_UDPHS 33 /* USB Device High Speed */
|
|
#define SAMA5D3_ID_GMAC 34 /* Gigabit Ethernet MAC */
|
|
#define SAMA5D3_ID_EMAC 35 /* Ethernet MAC */
|
|
#define SAMA5D3_ID_LCDC 36 /* LCD Controller */
|
|
#define SAMA5D3_ID_ISI 37 /* Image Sensor Interface */
|
|
#define SAMA5D3_ID_SSC0 38 /* Synchronous Serial Controller 0 */
|
|
#define SAMA5D3_ID_SSC1 39 /* Synchronous Serial Controller 1 */
|
|
#define SAMA5D3_ID_CAN0 40 /* CAN Controller 0 */
|
|
#define SAMA5D3_ID_CAN1 41 /* CAN Controller 1 */
|
|
#define SAMA5D3_ID_SHA 42 /* Secure Hash Algorithm */
|
|
#define SAMA5D3_ID_AES 43 /* Advanced Encryption Standard */
|
|
#define SAMA5D3_ID_TDES 44 /* Triple Data Encryption Standard */
|
|
#define SAMA5D3_ID_TRNG 45 /* True Random Generator Number */
|
|
#define SAMA5D3_ID_IRQ0 47 /* Advanced Interrupt Controller (IRQ0) */
|
|
|
|
/*
|
|
* User Peripheral physical base addresses.
|
|
*/
|
|
#define SAMA5D3_BASE_USART0 0xf001c000
|
|
#define SAMA5D3_BASE_USART1 0xf0020000
|
|
#define SAMA5D3_BASE_USART2 0xf8020000
|
|
#define SAMA5D3_BASE_USART3 0xf8024000
|
|
|
|
/*
|
|
* System Peripherals
|
|
*/
|
|
#define SAMA5D3_BASE_RTC 0xfffffeb0
|
|
|
|
/*
|
|
* Internal Memory
|
|
*/
|
|
#define SAMA5D3_SRAM_BASE 0x00300000 /* Internal SRAM base address */
|
|
#define SAMA5D3_SRAM_SIZE (128 * SZ_1K) /* Internal SRAM size (128Kb) */
|
|
|
|
#endif
|