mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 03:15:23 +07:00
1ccea77e2a
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
162 lines
4.6 KiB
C
162 lines
4.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* PL-2301/2302 USB host-to-host link cables
|
|
* Copyright (C) 2000-2005 by David Brownell
|
|
*/
|
|
|
|
// #define DEBUG // error path messages, extra info
|
|
// #define VERBOSE // more; success messages
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/usbnet.h>
|
|
|
|
|
|
/*
|
|
* Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/
|
|
*
|
|
* The protocol and handshaking used here should be bug-compatible
|
|
* with the Linux 2.2 "plusb" driver, by Deti Fliegl.
|
|
*
|
|
* HEADS UP: this handshaking isn't all that robust. This driver
|
|
* gets confused easily if you unplug one end of the cable then
|
|
* try to connect it again; you'll need to restart both ends. The
|
|
* "naplink" software (used by some PlayStation/2 developers) does
|
|
* the handshaking much better! Also, sometimes this hardware
|
|
* seems to get wedged under load. Prolific docs are weak, and
|
|
* don't identify differences between PL2301 and PL2302, much less
|
|
* anything to explain the different PL2302 versions observed.
|
|
*
|
|
* NOTE: pl2501 has several modes, including pl2301 and pl2302
|
|
* compatibility. Some docs suggest the difference between 2301
|
|
* and 2302 is only to make MS-Windows use a different driver...
|
|
*
|
|
* pl25a1 glue based on patch from Tony Gibbs. Prolific "docs" on
|
|
* this chip are as usual incomplete about what control messages
|
|
* are supported.
|
|
*/
|
|
|
|
/*
|
|
* Bits 0-4 can be used for software handshaking; they're set from
|
|
* one end, cleared from the other, "read" with the interrupt byte.
|
|
*/
|
|
#define PL_S_EN (1<<7) /* (feature only) suspend enable */
|
|
/* reserved bit -- rx ready (6) ? */
|
|
#define PL_TX_READY (1<<5) /* (interrupt only) transmit ready */
|
|
#define PL_RESET_OUT (1<<4) /* reset output pipe */
|
|
#define PL_RESET_IN (1<<3) /* reset input pipe */
|
|
#define PL_TX_C (1<<2) /* transmission complete */
|
|
#define PL_TX_REQ (1<<1) /* transmission received */
|
|
#define PL_PEER_E (1<<0) /* peer exists */
|
|
|
|
static inline int
|
|
pl_vendor_req(struct usbnet *dev, u8 req, u8 val, u8 index)
|
|
{
|
|
return usbnet_read_cmd(dev, req,
|
|
USB_DIR_IN | USB_TYPE_VENDOR |
|
|
USB_RECIP_DEVICE,
|
|
val, index, NULL, 0);
|
|
}
|
|
|
|
static inline int
|
|
pl_clear_QuickLink_features(struct usbnet *dev, int val)
|
|
{
|
|
return pl_vendor_req(dev, 1, (u8) val, 0);
|
|
}
|
|
|
|
static inline int
|
|
pl_set_QuickLink_features(struct usbnet *dev, int val)
|
|
{
|
|
return pl_vendor_req(dev, 3, (u8) val, 0);
|
|
}
|
|
|
|
static int pl_reset(struct usbnet *dev)
|
|
{
|
|
int status;
|
|
|
|
/* some units seem to need this reset, others reject it utterly.
|
|
* FIXME be more like "naplink" or windows drivers.
|
|
*/
|
|
status = pl_set_QuickLink_features(dev,
|
|
PL_S_EN|PL_RESET_OUT|PL_RESET_IN|PL_PEER_E);
|
|
if (status != 0 && netif_msg_probe(dev))
|
|
netif_dbg(dev, link, dev->net, "pl_reset --> %d\n", status);
|
|
return 0;
|
|
}
|
|
|
|
static const struct driver_info prolific_info = {
|
|
.description = "Prolific PL-2301/PL-2302/PL-25A1/PL-27A1",
|
|
.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT,
|
|
/* some PL-2302 versions seem to fail usb_set_interface() */
|
|
.reset = pl_reset,
|
|
};
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* Proilific's name won't normally be on the cables, and
|
|
* may not be on the device.
|
|
*/
|
|
|
|
static const struct usb_device_id products [] = {
|
|
|
|
/* full speed cables */
|
|
{
|
|
USB_DEVICE(0x067b, 0x0000), // PL-2301
|
|
.driver_info = (unsigned long) &prolific_info,
|
|
}, {
|
|
USB_DEVICE(0x067b, 0x0001), // PL-2302
|
|
.driver_info = (unsigned long) &prolific_info,
|
|
},
|
|
|
|
/* high speed cables */
|
|
{
|
|
USB_DEVICE(0x067b, 0x25a1), /* PL-25A1, no eeprom */
|
|
.driver_info = (unsigned long) &prolific_info,
|
|
}, {
|
|
USB_DEVICE(0x050d, 0x258a), /* Belkin F5U258/F5U279 (PL-25A1) */
|
|
.driver_info = (unsigned long) &prolific_info,
|
|
}, {
|
|
USB_DEVICE(0x3923, 0x7825), /* National Instruments USB
|
|
* Host-to-Host Cable
|
|
*/
|
|
.driver_info = (unsigned long) &prolific_info,
|
|
|
|
},
|
|
|
|
/* super speed cables */
|
|
{
|
|
USB_DEVICE(0x067b, 0x27a1), /* PL-27A1, no eeprom
|
|
* also: goobay Active USB 3.0
|
|
* Data Link,
|
|
* Unitek Y-3501
|
|
*/
|
|
.driver_info = (unsigned long) &prolific_info,
|
|
},
|
|
|
|
{ }, // END
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, products);
|
|
|
|
static struct usb_driver plusb_driver = {
|
|
.name = "plusb",
|
|
.id_table = products,
|
|
.probe = usbnet_probe,
|
|
.disconnect = usbnet_disconnect,
|
|
.suspend = usbnet_suspend,
|
|
.resume = usbnet_resume,
|
|
.disable_hub_initiated_lpm = 1,
|
|
};
|
|
|
|
module_usb_driver(plusb_driver);
|
|
|
|
MODULE_AUTHOR("David Brownell");
|
|
MODULE_DESCRIPTION("Prolific PL-2301/2302/25A1/27A1 USB Host to Host Link Driver");
|
|
MODULE_LICENSE("GPL");
|